| Message ID | 20211205095836.417258-1-chris.chiu@canonical.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | rtl8xxxu: Improve the A-MPDU retransmission rate with RTS/CTS protection | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
Chris Chiu <chris.chiu@canonical.com> writes: > The A-MPDU retransmission rate is always high (> 20%) even in a very > clean environment. However, the vendor driver retransimission rate is > < 10% in the same test bed. The different is the vendor driver starts > the A-MPDU TXOP with initial RTS/CTS handshake which is observed in the > air capture and the TX descriptor. Since there's no related field in > TX descriptor to enable the L-SIG TXOP protection and the duration, > applying the RTS/CTS protection instead helps to lower the retransmission > rate from > 20% to ~12% in the same test setup. > > Signed-off-by: Chris Chiu <chris.chiu@canonical.com> You should have marked this as v2 because you submitted already before: https://patchwork.kernel.org/project/linux-wireless/patch/20211129143953.369557-1-chris.chiu@canonical.com/ And include a list of changes between versions, more info in the wiki below.
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index a42e2081b75f..06d59ffb7444 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -4859,7 +4859,7 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled */ tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT); - if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + if (ampdu_enable || (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS)) { tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE); tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE); } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { @@ -4930,7 +4930,7 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, /* * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled */ - if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + if (ampdu_enable || (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS)) { tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE); tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE); } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
The A-MPDU retransmission rate is always high (> 20%) even in a very clean environment. However, the vendor driver retransimission rate is < 10% in the same test bed. The different is the vendor driver starts the A-MPDU TXOP with initial RTS/CTS handshake which is observed in the air capture and the TX descriptor. Since there's no related field in TX descriptor to enable the L-SIG TXOP protection and the duration, applying the RTS/CTS protection instead helps to lower the retransmission rate from > 20% to ~12% in the same test setup. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)