| Message ID | 20211208003727.3596577-14-f.fainelli@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Broadcom DT bindings updates to YAML | expand |
On Tue, 07 Dec 2021 16:37:24 -0800, Florian Fainelli wrote: > Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML > to help with validation. > > Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > .../bindings/ata/brcm,sata-brcm.txt | 45 --------- > .../bindings/ata/brcm,sata-brcm.yaml | 98 +++++++++++++++++++ > 2 files changed, 98 insertions(+), 45 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt > create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1565011 ahci@41000: $nodename:0: 'ahci@41000' does not match '^sata(@.*)?$' arch/arm/boot/dts/bcm958522er.dt.yaml arch/arm/boot/dts/bcm958525er.dt.yaml arch/arm/boot/dts/bcm958525xmc.dt.yaml arch/arm/boot/dts/bcm958622hr.dt.yaml arch/arm/boot/dts/bcm958623hr.dt.yaml arch/arm/boot/dts/bcm958625hr.dt.yaml arch/arm/boot/dts/bcm958625k.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64w.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx65.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx65w.dt.yaml arch/arm/boot/dts/bcm988312hr.dt.yaml ahci@41000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'sata-port@0', 'sata-port@1' were unexpected) arch/arm/boot/dts/bcm958522er.dt.yaml arch/arm/boot/dts/bcm958525er.dt.yaml arch/arm/boot/dts/bcm958525xmc.dt.yaml arch/arm/boot/dts/bcm958622hr.dt.yaml arch/arm/boot/dts/bcm958623hr.dt.yaml arch/arm/boot/dts/bcm958625hr.dt.yaml arch/arm/boot/dts/bcm958625k.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx64w.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx65.dt.yaml arch/arm/boot/dts/bcm958625-meraki-mx65w.dt.yaml arch/arm/boot/dts/bcm988312hr.dt.yaml
On 12/8/21 5:44 AM, Rob Herring wrote: > On Tue, 07 Dec 2021 16:37:24 -0800, Florian Fainelli wrote: >> Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML >> to help with validation. >> >> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> >> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> >> --- >> .../bindings/ata/brcm,sata-brcm.txt | 45 --------- >> .../bindings/ata/brcm,sata-brcm.yaml | 98 +++++++++++++++++++ >> 2 files changed, 98 insertions(+), 45 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt >> create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml >> > > Running 'make dtbs_check' with the schema in this patch gives the > following warnings. Consider if they are expected or the schema is > incorrect. These may not be new warnings. > > Note that it is not yet a requirement to have 0 warnings for dtbs_check. > This will change in the future. > > Full log is available here: https://patchwork.ozlabs.org/patch/1565011 Likewise, those indicate that the preceding patch which renames the sata controller unit name has not been applied.
On Wed, Dec 08, 2021 at 09:33:38AM -0800, Florian Fainelli wrote: > On 12/8/21 5:44 AM, Rob Herring wrote: > > On Tue, 07 Dec 2021 16:37:24 -0800, Florian Fainelli wrote: > >> Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML > >> to help with validation. > >> > >> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> > >> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > >> --- > >> .../bindings/ata/brcm,sata-brcm.txt | 45 --------- > >> .../bindings/ata/brcm,sata-brcm.yaml | 98 +++++++++++++++++++ > >> 2 files changed, 98 insertions(+), 45 deletions(-) > >> delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt > >> create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml > >> > > > > Running 'make dtbs_check' with the schema in this patch gives the > > following warnings. Consider if they are expected or the schema is > > incorrect. These may not be new warnings. > > > > Note that it is not yet a requirement to have 0 warnings for dtbs_check. > > This will change in the future. > > > > Full log is available here: https://patchwork.ozlabs.org/patch/1565011 > > Likewise, those indicate that the preceding patch which renames the sata > controller unit name has not been applied. I looked at that, but it was the unevaluated properties I was worried about. However, the example has the same thing, but no errors. I think running with DT_SCHEMA_FILES means sata-common.yaml is not included. I'll have to look into that. Rob
On Tue, Dec 07, 2021 at 04:37:24PM -0800, Florian Fainelli wrote: > Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML > to help with validation. > > Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > .../bindings/ata/brcm,sata-brcm.txt | 45 --------- > .../bindings/ata/brcm,sata-brcm.yaml | 98 +++++++++++++++++++ > 2 files changed, 98 insertions(+), 45 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt > create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml > > diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt > deleted file mode 100644 > index b9ae4ce4a0a0..000000000000 > --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt > +++ /dev/null > @@ -1,45 +0,0 @@ > -* Broadcom SATA3 AHCI Controller > - > -SATA nodes are defined to describe on-chip Serial ATA controllers. > -Each SATA controller should have its own node. > - > -Required properties: > -- compatible : should be one or more of > - "brcm,bcm7216-ahci" > - "brcm,bcm7425-ahci" > - "brcm,bcm7445-ahci" > - "brcm,bcm-nsp-ahci" > - "brcm,sata3-ahci" > - "brcm,bcm63138-ahci" > -- reg : register mappings for AHCI and SATA_TOP_CTRL > -- reg-names : "ahci" and "top-ctrl" > -- interrupts : interrupt mapping for SATA IRQ > - > -Optional properties: > - > -- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle > - pointing to the RESCAL reset controller provider node. > -- reset-names: for "brcm,bcm7216-ahci", must be "rescal". > - > -Also see ahci-platform.txt. > - > -Example: > - > - sata@f045a000 { > - compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; > - reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; > - reg-names = "ahci", "top-ctrl"; > - interrupts = <0 30 0>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - sata0: sata-port@0 { > - reg = <0>; > - phys = <&sata_phy 0>; > - }; > - > - sata1: sata-port@1 { > - reg = <1>; > - phys = <&sata_phy 1>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml > new file mode 100644 > index 000000000000..3e24f45c65af > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml > @@ -0,0 +1,98 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Broadcom SATA3 AHCI Controller > + > +description: > + SATA nodes are defined to describe on-chip Serial ATA controllers. > + Each SATA controller should have its own node. > + > +maintainers: > + - Florian Fainelli <f.fainelli@gmail.com> > + > +allOf: > + - $ref: sata-common.yaml# > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - brcm,bcm7216-ahci > + - const: brcm,sata3-ahci > + - items: > + - enum: > + - brcm,bcm7445-ahci > + - const: brcm,sata3-ahci > + - items: > + - enum: > + - brcm,bcm7425-ahci > + - const: brcm,sata3-ahci > + - items: > + - const: brcm,bcm-nsp-ahci > + - items: > + - enum: > + - brcm,bcm63138-ahci > + - const: brcm,sata3-ahci Is there some reason this is not grouped into 2 oneOf entries? If not, I can fixup. > + > + reg: > + minItems: 2 > + maxItems: 2 > + > + reg-names: > + items: > + - const: ahci > + - const: top-ctrl > + > + interrupts: true maxItems: 1 ? > + > + dma-coherent: true > + > +if: > + properties: > + compatible: > + contains: > + enum: > + - brcm,bcm7216-ahci > + - brcm,bcm63138-ahci > +then: > + properties: > + resets: > + maxItems: 1 > + reset-names: > + enum: > + - rescal > + - ahci > + > +required: > + - compatible > + - reg > + - interrupts > + - "#address-cells" > + - "#size-cells" > + > +unevaluatedProperties: false > + > +examples: > + - | > + sata@f045a000 { > + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; > + reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; > + reg-names = "ahci", "top-ctrl"; > + interrupts = <0 30 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + sata0: sata-port@0 { > + reg = <0>; > + phys = <&sata_phy 0>; > + }; > + > + sata1: sata-port@1 { > + reg = <1>; > + phys = <&sata_phy 1>; > + }; > + }; > -- > 2.25.1 > >
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt deleted file mode 100644 index b9ae4ce4a0a0..000000000000 --- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Broadcom SATA3 AHCI Controller - -SATA nodes are defined to describe on-chip Serial ATA controllers. -Each SATA controller should have its own node. - -Required properties: -- compatible : should be one or more of - "brcm,bcm7216-ahci" - "brcm,bcm7425-ahci" - "brcm,bcm7445-ahci" - "brcm,bcm-nsp-ahci" - "brcm,sata3-ahci" - "brcm,bcm63138-ahci" -- reg : register mappings for AHCI and SATA_TOP_CTRL -- reg-names : "ahci" and "top-ctrl" -- interrupts : interrupt mapping for SATA IRQ - -Optional properties: - -- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle - pointing to the RESCAL reset controller provider node. -- reset-names: for "brcm,bcm7216-ahci", must be "rescal". - -Also see ahci-platform.txt. - -Example: - - sata@f045a000 { - compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; - reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; - reg-names = "ahci", "top-ctrl"; - interrupts = <0 30 0>; - #address-cells = <1>; - #size-cells = <0>; - - sata0: sata-port@0 { - reg = <0>; - phys = <&sata_phy 0>; - }; - - sata1: sata-port@1 { - reg = <1>; - phys = <&sata_phy 1>; - }; - }; diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml new file mode 100644 index 000000000000..3e24f45c65af --- /dev/null +++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom SATA3 AHCI Controller + +description: + SATA nodes are defined to describe on-chip Serial ATA controllers. + Each SATA controller should have its own node. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: sata-common.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - brcm,bcm7216-ahci + - const: brcm,sata3-ahci + - items: + - enum: + - brcm,bcm7445-ahci + - const: brcm,sata3-ahci + - items: + - enum: + - brcm,bcm7425-ahci + - const: brcm,sata3-ahci + - items: + - const: brcm,bcm-nsp-ahci + - items: + - enum: + - brcm,bcm63138-ahci + - const: brcm,sata3-ahci + + reg: + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: ahci + - const: top-ctrl + + interrupts: true + + dma-coherent: true + +if: + properties: + compatible: + contains: + enum: + - brcm,bcm7216-ahci + - brcm,bcm63138-ahci +then: + properties: + resets: + maxItems: 1 + reset-names: + enum: + - rescal + - ahci + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + sata@f045a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; + reg-names = "ahci", "top-ctrl"; + interrupts = <0 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + }; + };