| Message ID | 20211210145430.3707463-4-gsomlo@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: Add LiteSDCard mmc driver | expand |
Hi Joel, On Fri, Dec 10, 2021 at 09:54:30AM -0500, Gabriel Somlo wrote: > LiteX (https://github.com/enjoy-digital/litex) is a SoC framework > that targets FPGAs. LiteSDCard is a small footprint, configurable > SDCard core commonly used in LiteX designs. > > The driver was first written in May 2020 and has been maintained > cooperatively by the LiteX community. Thanks to all contributors! > > Co-developed-by: Kamil Rakoczy <krakoczy@antmicro.com> > Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com> > Co-developed-by: Maciej Dudek <mdudek@internships.antmicro.com> > Signed-off-by: Maciej Dudek <mdudek@internships.antmicro.com> > Co-developed-by: Paul Mackerras <paulus@ozlabs.org> > Signed-off-by: Paul Mackerras <paulus@ozlabs.org> > Signed-off-by: Gabriel Somlo <gsomlo@gmail.com> > Cc: Mateusz Holenko <mholenko@antmicro.com> > Cc: Karol Gugala <kgugala@antmicro.com> > Cc: Joel Stanley <joel@jms.id.au> > Cc: Stafford Horne <shorne@gmail.com> > Cc: Geert Uytterhoeven <geert@linux-m68k.org> > Cc: David Abdurachmanov <david.abdurachmanov@sifive.com> > Cc: Florent Kermarrec <florent@enjoy-digital.fr> > --- > > New in v4: > - struct litex_mmc_host fields re-ordered so that `pahole` reports > no holes on either 32- or 64-bit builds > - litex_mmc_set_bus_width() now encapsulates check for > host->is_bus_width_set > - litex_mmc_request() - factor out dma data setup into separate > helper function: litex_mmc_do_dma() > > > New in v3: > > - fixed function signature (no line split), and naming (litex_mmc_*) > > - more informative MODULE_AUTHOR() entries > > - also added matching "Copyright" entries in file header > > - fixed description and dependencies in Kconfig > > - removed magic constants > > - removed litex_map_status(), have sdcard_wait_done() return *real* > > error codes directly instead. > > - streamlined litex_mmc_reponse_len() > > - call litex_mmc_set_bus_width() only once, and ensure it returns > > correct error code(s) > > - use readx_poll_timeout() -- more concise -- instead of > > read_poll_timeout() > > - use dev_err() in litex_mmc_send_cmd() (instead of pr_err()) > > - litex_mmc_setclk() will update host->clock before returning > > - separate irq initialization into its own function, > > litex_mmc_irq_init() > > - document rationale for f_min, f_max > > - use dmam_alloc_coherent(), which simplifies cleanup significantly > > - bump dma_set_mask_and_coherent() to 64-bits on suitable > > architectures > > - clock source picked up from dedicated DT clock reference property > > - remove gpio card-detect logic (needs testing and a dt binding > > example before being eligible for upstream inclusion) > > - large `if (data) { ... }` block in litex_mmc_request() left as-is, > > there are too many variables shared with the rest of the parent > > function body to easily separate (e.g., `len`, `transfer`, `direct`). > > If this is indeed a blocker, I can take another shot at refactoring > > it in a future revision! > > drivers/mmc/host/Kconfig | 9 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/litex_mmc.c | 654 +++++++++++++++++++++++++++++++++++ > 3 files changed, 664 insertions(+) > create mode 100644 drivers/mmc/host/litex_mmc.c > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 5af8494c31b5..c1b66d06d1c9 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -1093,3 +1093,12 @@ config MMC_OWL > > config MMC_SDHCI_EXTERNAL_DMA > bool > + > +config MMC_LITEX > + tristate "LiteX MMC Host Controller support" I remembered I still owe you an answer on whether this was ever successfully tested as a module: The answer is *yes* -- if configured as a loadable module, it loads OK with modprobe, works fine, and can be unloaded (with `modprobe -r`) and re-loaded indefinitely. Thanks again, --Gabriel > + depends on OF > + depends on PPC_MICROWATT || LITEX || COMPILE_TEST > + help > + This selects support for the MMC Host Controller found in LiteX SoCs. > + > + If unsure, say N. > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index ea36d379bd3c..4e4ceb32c4b4 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -101,6 +101,7 @@ obj-$(CONFIG_MMC_CQHCI) += cqhci.o > cqhci-y += cqhci-core.o > cqhci-$(CONFIG_MMC_CRYPTO) += cqhci-crypto.o > obj-$(CONFIG_MMC_HSQ) += mmc_hsq.o > +obj-$(CONFIG_MMC_LITEX) += litex_mmc.o > > ifeq ($(CONFIG_CB710_DEBUG),y) > CFLAGS-cb710-mmc += -DDEBUG > diff --git a/drivers/mmc/host/litex_mmc.c b/drivers/mmc/host/litex_mmc.c > new file mode 100644 > index 000000000000..5609ab42539d > --- /dev/null > +++ b/drivers/mmc/host/litex_mmc.c > @@ -0,0 +1,654 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * LiteX LiteSDCard driver > + * > + * Copyright (C) 2019-2020 Antmicro <contact@antmicro.com> > + * Copyright (C) 2019-2020 Kamil Rakoczy <krakoczy@antmicro.com> > + * Copyright (C) 2019-2020 Maciej Dudek <mdudek@internships.antmicro.com> > + * Copyright (C) 2020 Paul Mackerras <paulus@ozlabs.org> > + * Copyright (C) 2020-2021 Gabriel Somlo <gsomlo@gmail.com> > + * > + */ > + > +#include <linux/module.h> > +#include <linux/litex.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/clk.h> > +#include <linux/interrupt.h> > +#include <linux/iopoll.h> > +#include <linux/mmc/sd.h> > +#include <linux/mmc/mmc.h> > +#include <linux/mmc/host.h> > +#include <linux/delay.h> > +#include <linux/dma-mapping.h> > + > +#define LITEX_PHY_CARDDETECT 0x00 > +#define LITEX_PHY_CLOCKERDIV 0x04 > +#define LITEX_PHY_INITIALIZE 0x08 > +#define LITEX_PHY_WRITESTATUS 0x0C > +#define LITEX_CORE_CMDARG 0x00 > +#define LITEX_CORE_CMDCMD 0x04 > +#define LITEX_CORE_CMDSND 0x08 > +#define LITEX_CORE_CMDRSP 0x0C > +#define LITEX_CORE_CMDEVT 0x1C > +#define LITEX_CORE_DATAEVT 0x20 > +#define LITEX_CORE_BLKLEN 0x24 > +#define LITEX_CORE_BLKCNT 0x28 > +#define LITEX_BLK2MEM_BASE 0x00 > +#define LITEX_BLK2MEM_LEN 0x08 > +#define LITEX_BLK2MEM_ENA 0x0C > +#define LITEX_BLK2MEM_DONE 0x10 > +#define LITEX_BLK2MEM_LOOP 0x14 > +#define LITEX_MEM2BLK_BASE 0x00 > +#define LITEX_MEM2BLK_LEN 0x08 > +#define LITEX_MEM2BLK_ENA 0x0C > +#define LITEX_MEM2BLK_DONE 0x10 > +#define LITEX_MEM2BLK_LOOP 0x14 > +#define LITEX_MEM2BLK 0x18 > +#define LITEX_IRQ_STATUS 0x00 > +#define LITEX_IRQ_PENDING 0x04 > +#define LITEX_IRQ_ENABLE 0x08 > + > +#define SDCARD_CTRL_DATA_TRANSFER_NONE 0 > +#define SDCARD_CTRL_DATA_TRANSFER_READ 1 > +#define SDCARD_CTRL_DATA_TRANSFER_WRITE 2 > + > +#define SDCARD_CTRL_RESPONSE_NONE 0 > +#define SDCARD_CTRL_RESPONSE_SHORT 1 > +#define SDCARD_CTRL_RESPONSE_LONG 2 > +#define SDCARD_CTRL_RESPONSE_SHORT_BUSY 3 > + > +#define SD_BIT_DONE BIT(0) > +#define SD_BIT_WR_ERR BIT(1) > +#define SD_BIT_TIMEOUT BIT(2) > +#define SD_BIT_CRC_ERR BIT(3) > + > +#define SD_SLEEP_US 5 > +#define SD_TIMEOUT_US 20000 > + > +#define SDIRQ_CARD_DETECT 1 > +#define SDIRQ_SD_TO_MEM_DONE 2 > +#define SDIRQ_MEM_TO_SD_DONE 4 > +#define SDIRQ_CMD_DONE 8 > + > +struct litex_mmc_host { > + struct mmc_host *mmc; > + struct platform_device *dev; > + > + void __iomem *sdphy; > + void __iomem *sdcore; > + void __iomem *sdreader; > + void __iomem *sdwriter; > + void __iomem *sdirq; > + > + void *buffer; > + size_t buf_size; > + dma_addr_t dma; > + > + struct completion cmd_done; > + int irq; > + > + unsigned int ref_clk; > + unsigned int sd_clk; > + > + u32 resp[4]; > + u16 rca; > + > + bool is_bus_width_set; > + bool app_cmd; > +}; > + > +static int litex_mmc_sdcard_wait_done(void __iomem *reg) > +{ > + u8 evt; > + int ret; > + > + ret = readx_poll_timeout(litex_read8, reg, evt, (evt & SD_BIT_DONE), > + SD_SLEEP_US, SD_TIMEOUT_US); > + if (ret || (evt & SD_BIT_TIMEOUT)) > + return -ETIMEDOUT; > + if (evt == SD_BIT_DONE) > + return 0; > + if (evt & SD_BIT_WR_ERR) > + return -EIO; > + if (evt & SD_BIT_CRC_ERR) > + return -EILSEQ; > + pr_err("%s: unknown error evt=%x\n", __func__, evt); > + return -EINVAL; > +} > + > +static int litex_mmc_send_cmd(struct litex_mmc_host *host, > + u8 cmd, u32 arg, u8 response_len, u8 transfer) > +{ > + struct device *dev = mmc_dev(host->mmc); > + void __iomem *reg; > + int ret; > + u8 evt; > + > + litex_write32(host->sdcore + LITEX_CORE_CMDARG, arg); > + litex_write32(host->sdcore + LITEX_CORE_CMDCMD, > + cmd << 8 | transfer << 5 | response_len); > + litex_write8(host->sdcore + LITEX_CORE_CMDSND, 1); > + > + /* Wait for an interrupt if we have an interrupt and either there is > + * data to be transferred, or if the card can report busy via DAT0. > + */ > + if (host->irq > 0 && > + (transfer != SDCARD_CTRL_DATA_TRANSFER_NONE || > + response_len == SDCARD_CTRL_RESPONSE_SHORT_BUSY)) { > + reinit_completion(&host->cmd_done); > + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, > + SDIRQ_CMD_DONE | SDIRQ_CARD_DETECT); > + wait_for_completion(&host->cmd_done); > + } > + > + ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_CMDEVT); > + if (ret) { > + dev_err(dev, "Command (cmd %d) error, status %d\n", cmd, ret); > + return ret; > + } > + > + if (response_len != SDCARD_CTRL_RESPONSE_NONE) { > + int i; > + > + reg = host->sdcore + LITEX_CORE_CMDRSP; > + for (i = 0; i < 4; i++) { > + host->resp[i] = litex_read32(reg); > + reg += sizeof(u32); > + } > + } > + > + if (!host->app_cmd && cmd == SD_SEND_RELATIVE_ADDR) > + host->rca = (host->resp[3] >> 16) & 0xffff; > + > + host->app_cmd = (cmd == MMC_APP_CMD); > + > + if (transfer == SDCARD_CTRL_DATA_TRANSFER_NONE) > + return ret; /* OK from prior litex_mmc_sdcard_wait_done() */ > + > + ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_DATAEVT); > + if (ret) { > + dev_err(dev, "Data xfer (cmd %d) error, status %d\n", cmd, ret); > + return ret; > + } > + > + /* wait for completion of (read or write) DMA transfer */ > + reg = (transfer == SDCARD_CTRL_DATA_TRANSFER_READ) ? > + host->sdreader + LITEX_BLK2MEM_DONE : > + host->sdwriter + LITEX_MEM2BLK_DONE; > + ret = readx_poll_timeout(litex_read8, reg, evt, (evt & SD_BIT_DONE), > + SD_SLEEP_US, SD_TIMEOUT_US); > + if (ret) > + dev_err(dev, "DMA timeout (cmd %d)\n", cmd); > + > + return ret; > +} > + > +static int litex_mmc_send_app_cmd(struct litex_mmc_host *host) > +{ > + return litex_mmc_send_cmd(host, MMC_APP_CMD, host->rca << 16, > + SDCARD_CTRL_RESPONSE_SHORT, > + SDCARD_CTRL_DATA_TRANSFER_NONE); > +} > + > +static int litex_mmc_send_set_bus_w_cmd(struct litex_mmc_host *host, u32 width) > +{ > + return litex_mmc_send_cmd(host, SD_APP_SET_BUS_WIDTH, width, > + SDCARD_CTRL_RESPONSE_SHORT, > + SDCARD_CTRL_DATA_TRANSFER_NONE); > +} > + > +static int litex_mmc_set_bus_width(struct litex_mmc_host *host) > +{ > + bool app_cmd_sent; > + int ret; > + > + if (host->is_bus_width_set) > + return 0; > + > + /* ensure 'app_cmd' precedes 'app_set_bus_width_cmd' */ > + app_cmd_sent = host->app_cmd; /* was preceding command app_cmd? */ > + if (!app_cmd_sent) { > + ret = litex_mmc_send_app_cmd(host); > + if (ret) > + return ret; > + } > + > + /* litesdcard only supports 4-bit bus width */ > + ret = litex_mmc_send_set_bus_w_cmd(host, MMC_BUS_WIDTH_4); > + if (ret) > + return ret; > + > + /* re-send 'app_cmd' if necessary */ > + if (app_cmd_sent) { > + ret = litex_mmc_send_app_cmd(host); > + if (ret) > + return ret; > + } > + > + host->is_bus_width_set = true; > + > + return 0; > +} > + > +static int litex_mmc_get_cd(struct mmc_host *mmc) > +{ > + struct litex_mmc_host *host = mmc_priv(mmc); > + int ret; > + > + if (!mmc_card_is_removable(mmc)) > + return 1; > + > + ret = !litex_read8(host->sdphy + LITEX_PHY_CARDDETECT); > + > + /* ensure bus width will be set (again) upon card (re)insertion */ > + if (ret == 0) > + host->is_bus_width_set = false; > + > + return ret; > +} > + > +static irqreturn_t litex_mmc_interrupt(int irq, void *arg) > +{ > + struct mmc_host *mmc = arg; > + struct litex_mmc_host *host = mmc_priv(mmc); > + u32 pending = litex_read32(host->sdirq + LITEX_IRQ_PENDING); > + > + /* Check for card change interrupt */ > + if (pending & SDIRQ_CARD_DETECT) { > + litex_write32(host->sdirq + LITEX_IRQ_PENDING, > + SDIRQ_CARD_DETECT); > + mmc_detect_change(mmc, msecs_to_jiffies(10)); > + } > + > + /* Check for command completed */ > + if (pending & SDIRQ_CMD_DONE) { > + /* Disable it so it doesn't keep interrupting */ > + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, > + SDIRQ_CARD_DETECT); > + complete(&host->cmd_done); > + } > + > + return IRQ_HANDLED; > +} > + > +static u32 litex_mmc_response_len(struct mmc_command *cmd) > +{ > + if (cmd->flags & MMC_RSP_136) > + return SDCARD_CTRL_RESPONSE_LONG; > + if (!(cmd->flags & MMC_RSP_PRESENT)) > + return SDCARD_CTRL_RESPONSE_NONE; > + if (cmd->flags & MMC_RSP_BUSY) > + return SDCARD_CTRL_RESPONSE_SHORT_BUSY; > + return SDCARD_CTRL_RESPONSE_SHORT; > +} > + > +static void litex_mmc_do_dma(struct litex_mmc_host *host, struct mmc_data *data, > + unsigned int *len, bool *direct, u8 *transfer) > +{ > + struct device *dev = mmc_dev(host->mmc); > + dma_addr_t dma; > + int sg_count; > + > + /* Try to DMA directly to/from the data buffer. > + * We can do that if the buffer can be mapped for DMA > + * in one contiguous chunk. > + */ > + dma = host->dma; > + *len = data->blksz * data->blocks; > + sg_count = dma_map_sg(dev, data->sg, data->sg_len, > + mmc_get_dma_dir(data)); > + if (sg_count == 1) { > + dma = sg_dma_address(data->sg); > + *len = sg_dma_len(data->sg); > + *direct = true; > + } else if (*len > host->buf_size) > + *len = host->buf_size; > + > + if (data->flags & MMC_DATA_READ) { > + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0); > + litex_write64(host->sdreader + LITEX_BLK2MEM_BASE, dma); > + litex_write32(host->sdreader + LITEX_BLK2MEM_LEN, *len); > + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 1); > + *transfer = SDCARD_CTRL_DATA_TRANSFER_READ; > + } else if (data->flags & MMC_DATA_WRITE) { > + if (!*direct) > + sg_copy_to_buffer(data->sg, data->sg_len, > + host->buffer, *len); > + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0); > + litex_write64(host->sdwriter + LITEX_MEM2BLK_BASE, dma); > + litex_write32(host->sdwriter + LITEX_MEM2BLK_LEN, *len); > + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 1); > + *transfer = SDCARD_CTRL_DATA_TRANSFER_WRITE; > + } else { > + dev_warn(dev, "Data present w/o read or write flag.\n"); > + /* Continue: set cmd status, mark req done */ > + } > + > + litex_write16(host->sdcore + LITEX_CORE_BLKLEN, data->blksz); > + litex_write32(host->sdcore + LITEX_CORE_BLKCNT, data->blocks); > +} > + > +static void litex_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct litex_mmc_host *host = mmc_priv(mmc); > + struct device *dev = mmc_dev(mmc); > + struct mmc_command *cmd = mrq->cmd; > + struct mmc_command *sbc = mrq->sbc; > + struct mmc_data *data = mrq->data; > + struct mmc_command *stop = mrq->stop; > + unsigned int retries = cmd->retries; > + unsigned int len = 0; > + bool direct = false; > + u32 response_len = litex_mmc_response_len(cmd); > + u8 transfer = SDCARD_CTRL_DATA_TRANSFER_NONE; > + > + /* First check that the card is still there */ > + if (!litex_mmc_get_cd(mmc)) { > + cmd->error = -ENOMEDIUM; > + mmc_request_done(mmc, mrq); > + return; > + } > + > + /* Send set-block-count command if needed */ > + if (sbc) { > + sbc->error = litex_mmc_send_cmd(host, sbc->opcode, sbc->arg, > + litex_mmc_response_len(sbc), > + SDCARD_CTRL_DATA_TRANSFER_NONE); > + if (sbc->error) { > + host->is_bus_width_set = false; > + mmc_request_done(mmc, mrq); > + return; > + } > + } > + > + if (data) { > + /* LiteSDCard only supports 4-bit bus width; therefore, we MUST > + * inject a SET_BUS_WIDTH (acmd6) before the very first data > + * transfer, earlier than when the mmc subsystem would normally > + * get around to it! > + */ > + cmd->error = litex_mmc_set_bus_width(host); > + if (cmd->error) { > + dev_err(dev, "Can't set bus width!\n"); > + mmc_request_done(mmc, mrq); > + return; > + } > + > + litex_mmc_do_dma(host, data, &len, &direct, &transfer); > + } > + > + do { > + cmd->error = litex_mmc_send_cmd(host, cmd->opcode, cmd->arg, > + response_len, transfer); > + } while (cmd->error && retries-- > 0); > + > + if (cmd->error) { > + /* card may be gone; don't assume bus width is still set */ > + host->is_bus_width_set = false; > + } > + > + if (response_len == SDCARD_CTRL_RESPONSE_SHORT) { > + /* pull short response fields from appropriate host registers */ > + cmd->resp[0] = host->resp[3]; > + cmd->resp[1] = host->resp[2] & 0xFF; > + } else if (response_len == SDCARD_CTRL_RESPONSE_LONG) { > + cmd->resp[0] = host->resp[0]; > + cmd->resp[1] = host->resp[1]; > + cmd->resp[2] = host->resp[2]; > + cmd->resp[3] = host->resp[3]; > + } > + > + /* Send stop-transmission command if required */ > + if (stop && (cmd->error || !sbc)) { > + stop->error = litex_mmc_send_cmd(host, stop->opcode, stop->arg, > + litex_mmc_response_len(stop), > + SDCARD_CTRL_DATA_TRANSFER_NONE); > + if (stop->error) > + host->is_bus_width_set = false; > + } > + > + if (data) { > + dma_unmap_sg(dev, data->sg, data->sg_len, > + mmc_get_dma_dir(data)); > + } > + > + if (!cmd->error && transfer != SDCARD_CTRL_DATA_TRANSFER_NONE) { > + data->bytes_xfered = min(len, mmc->max_req_size); > + if (transfer == SDCARD_CTRL_DATA_TRANSFER_READ && !direct) { > + sg_copy_from_buffer(data->sg, sg_nents(data->sg), > + host->buffer, data->bytes_xfered); > + } > + } > + > + mmc_request_done(mmc, mrq); > +} > + > +static void litex_mmc_setclk(struct litex_mmc_host *host, unsigned int freq) > +{ > + struct device *dev = mmc_dev(host->mmc); > + u32 div; > + > + div = freq ? host->ref_clk / freq : 256U; > + div = roundup_pow_of_two(div); > + div = min(max(div, 2U), 256U); > + dev_dbg(dev, "sd_clk_freq=%d: set to %d via div=%d\n", > + freq, host->ref_clk / div, div); > + litex_write16(host->sdphy + LITEX_PHY_CLOCKERDIV, div); > + host->sd_clk = freq; > +} > + > +static void litex_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct litex_mmc_host *host = mmc_priv(mmc); > + > + /* NOTE: Ignore any ios->bus_width updates; they occur right after > + * the mmc core sends its own acmd6 bus-width change notification, > + * which is redundant since we snoop on the command flow and inject > + * an early acmd6 before the first data transfer command is sent! > + */ > + > + /* update sd_clk */ > + if (ios->clock != host->sd_clk) > + litex_mmc_setclk(host, ios->clock); > +} > + > +static const struct mmc_host_ops litex_mmc_ops = { > + .get_cd = litex_mmc_get_cd, > + .request = litex_mmc_request, > + .set_ios = litex_mmc_set_ios, > +}; > + > +static int litex_mmc_irq_init(struct litex_mmc_host *host) > +{ > + struct device *dev = mmc_dev(host->mmc); > + int ret; > + > + host->irq = platform_get_irq_optional(host->dev, 0); > + if (host->irq <= 0) { > + dev_warn(dev, "Failed to get IRQ, using polling\n"); > + goto use_polling; > + } > + > + host->sdirq = devm_platform_ioremap_resource_byname(host->dev, "irq"); > + if (IS_ERR(host->sdirq)) > + return PTR_ERR(host->sdirq); > + > + ret = request_irq(host->irq, litex_mmc_interrupt, 0, > + "litex-mmc", host->mmc); > + if (ret < 0) { > + dev_warn(dev, "IRQ request error %d, using polling\n", ret); > + goto use_polling; > + } > + > + /* clear & enable card-change interrupts */ > + litex_write32(host->sdirq + LITEX_IRQ_PENDING, SDIRQ_CARD_DETECT); > + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, SDIRQ_CARD_DETECT); > + > + return 0; > + > +use_polling: > + host->mmc->caps |= MMC_CAP_NEEDS_POLL; > + host->irq = 0; > + return 0; > +} > + > +static int litex_mmc_probe(struct platform_device *pdev) > +{ > + struct litex_mmc_host *host; > + struct mmc_host *mmc; > + struct clk *clk; > + int ret; > + > + mmc = mmc_alloc_host(sizeof(struct litex_mmc_host), &pdev->dev); > + /* NOTE: defaults to max_[req,seg]_size=PAGE_SIZE, max_blk_size=512, > + * and max_blk_count accordingly set to 8; > + * If for some reason we need to modify max_blk_count, we must also > + * re-calculate `max_[req,seg]_size = max_blk_size * max_blk_count;` > + */ > + if (!mmc) > + return -ENOMEM; > + > + host = mmc_priv(mmc); > + host->mmc = mmc; > + host->dev = pdev; > + > + /* initialize clock source */ > + clk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(clk)) { > + ret = dev_err_probe(&pdev->dev, > + PTR_ERR(clk), "can't get clock\n"); > + goto err; > + } > + host->ref_clk = clk_get_rate(clk); > + host->sd_clk = 0; > + > + /* LiteSDCard only supports 4-bit bus width; therefore, we MUST inject > + * a SET_BUS_WIDTH (acmd6) before the very first data transfer, earlier > + * than when the mmc subsystem would normally get around to it! > + */ > + host->is_bus_width_set = false; > + host->app_cmd = false; > + > +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT > + /* increase from default 32 on 64-bit-DMA capable architectures */ > + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); > + if (ret) > + goto err; > +#endif > + > + host->buf_size = mmc->max_req_size * 2; > + host->buffer = dmam_alloc_coherent(&pdev->dev, host->buf_size, > + &host->dma, GFP_DMA); > + if (host->buffer == NULL) { > + ret = -ENOMEM; > + goto err; > + } > + > + host->sdphy = devm_platform_ioremap_resource_byname(pdev, "phy"); > + if (IS_ERR(host->sdphy)) { > + ret = PTR_ERR(host->sdphy); > + goto err; > + } > + > + host->sdcore = devm_platform_ioremap_resource_byname(pdev, "core"); > + if (IS_ERR(host->sdcore)) { > + ret = PTR_ERR(host->sdcore); > + goto err; > + } > + > + host->sdreader = devm_platform_ioremap_resource_byname(pdev, "reader"); > + if (IS_ERR(host->sdreader)) { > + ret = PTR_ERR(host->sdreader); > + goto err; > + } > + > + host->sdwriter = devm_platform_ioremap_resource_byname(pdev, "writer"); > + if (IS_ERR(host->sdwriter)) { > + ret = PTR_ERR(host->sdwriter); > + goto err; > + } > + > + /* ensure DMA bus masters are disabled */ > + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0); > + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0); > + > + init_completion(&host->cmd_done); > + ret = litex_mmc_irq_init(host); > + if (ret) > + goto err; > + > + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; > + mmc->ops = &litex_mmc_ops; > + > + /* set default sd_clk frequency range based on empirical observations > + * of LiteSDCard gateware behavior on typical SDCard media > + */ > + mmc->f_min = 12.5e6; > + mmc->f_max = 50e6; > + > + ret = mmc_of_parse(mmc); > + if (ret) > + goto err; > + > + /* force 4-bit bus_width (only width supported by hardware) */ > + mmc->caps &= ~MMC_CAP_8_BIT_DATA; > + mmc->caps |= MMC_CAP_4_BIT_DATA; > + > + /* set default capabilities */ > + mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | > + MMC_CAP_DRIVER_TYPE_D | > + MMC_CAP_CMD23; > + mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT | > + MMC_CAP2_FULL_PWR_CYCLE | > + MMC_CAP2_NO_SDIO; > + > + platform_set_drvdata(pdev, host); > + > + ret = mmc_add_host(mmc); > + if (ret < 0) > + goto err; > + > + return 0; > + > +err: > + mmc_free_host(mmc); > + return ret; > +} > + > +static int litex_mmc_remove(struct platform_device *pdev) > +{ > + struct litex_mmc_host *host = dev_get_drvdata(&pdev->dev); > + > + if (host->irq > 0) > + free_irq(host->irq, host->mmc); > + mmc_remove_host(host->mmc); > + mmc_free_host(host->mmc); > + > + return 0; > +} > + > +static const struct of_device_id litex_match[] = { > + { .compatible = "litex,mmc" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, litex_match); > + > +static struct platform_driver litex_mmc_driver = { > + .probe = litex_mmc_probe, > + .remove = litex_mmc_remove, > + .driver = { > + .name = "litex-mmc", > + .of_match_table = of_match_ptr(litex_match), > + }, > +}; > +module_platform_driver(litex_mmc_driver); > + > +MODULE_DESCRIPTION("LiteX SDCard driver"); > +MODULE_AUTHOR("Antmicro <contact@antmicro.com>"); > +MODULE_AUTHOR("Kamil Rakoczy <krakoczy@antmicro.com>"); > +MODULE_AUTHOR("Maciej Dudek <mdudek@internships.antmicro.com>"); > +MODULE_AUTHOR("Paul Mackerras <paulus@ozlabs.org>"); > +MODULE_AUTHOR("Gabriel Somlo <gsomlo@gmail.com>"); > +MODULE_LICENSE("GPL v2"); > -- > 2.31.1 >
On Sun, 12 Dec 2021 at 16:21, Gabriel L. Somlo <gsomlo@gmail.com> wrote: > > Hi Joel, > > On Fri, Dec 10, 2021 at 09:54:30AM -0500, Gabriel Somlo wrote: > > LiteX (https://github.com/enjoy-digital/litex) is a SoC framework > > that targets FPGAs. LiteSDCard is a small footprint, configurable > > SDCard core commonly used in LiteX designs. > > > > The driver was first written in May 2020 and has been maintained > > cooperatively by the LiteX community. Thanks to all contributors! > > > > Co-developed-by: Kamil Rakoczy <krakoczy@antmicro.com> > > Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com> > > Co-developed-by: Maciej Dudek <mdudek@internships.antmicro.com> > > Signed-off-by: Maciej Dudek <mdudek@internships.antmicro.com> > > Co-developed-by: Paul Mackerras <paulus@ozlabs.org> > > Signed-off-by: Paul Mackerras <paulus@ozlabs.org> > > Signed-off-by: Gabriel Somlo <gsomlo@gmail.com> > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > > index 5af8494c31b5..c1b66d06d1c9 100644 > > --- a/drivers/mmc/host/Kconfig > > +++ b/drivers/mmc/host/Kconfig > > @@ -1093,3 +1093,12 @@ config MMC_OWL > > > > config MMC_SDHCI_EXTERNAL_DMA > > bool > > + > > +config MMC_LITEX > > + tristate "LiteX MMC Host Controller support" > > I remembered I still owe you an answer on whether this was ever > successfully tested as a module: The answer is *yes* -- if configured > as a loadable module, it loads OK with modprobe, works fine, and can > be unloaded (with `modprobe -r`) and re-loaded indefinitely. Very good. Thanks for following up on the suggestions I made. Reviewed-by: Joel Stanley <joel@jms.id.au> Cheers, Joel
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 5af8494c31b5..c1b66d06d1c9 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -1093,3 +1093,12 @@ config MMC_OWL config MMC_SDHCI_EXTERNAL_DMA bool + +config MMC_LITEX + tristate "LiteX MMC Host Controller support" + depends on OF + depends on PPC_MICROWATT || LITEX || COMPILE_TEST + help + This selects support for the MMC Host Controller found in LiteX SoCs. + + If unsure, say N. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index ea36d379bd3c..4e4ceb32c4b4 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_MMC_CQHCI) += cqhci.o cqhci-y += cqhci-core.o cqhci-$(CONFIG_MMC_CRYPTO) += cqhci-crypto.o obj-$(CONFIG_MMC_HSQ) += mmc_hsq.o +obj-$(CONFIG_MMC_LITEX) += litex_mmc.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/litex_mmc.c b/drivers/mmc/host/litex_mmc.c new file mode 100644 index 000000000000..5609ab42539d --- /dev/null +++ b/drivers/mmc/host/litex_mmc.c @@ -0,0 +1,654 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * LiteX LiteSDCard driver + * + * Copyright (C) 2019-2020 Antmicro <contact@antmicro.com> + * Copyright (C) 2019-2020 Kamil Rakoczy <krakoczy@antmicro.com> + * Copyright (C) 2019-2020 Maciej Dudek <mdudek@internships.antmicro.com> + * Copyright (C) 2020 Paul Mackerras <paulus@ozlabs.org> + * Copyright (C) 2020-2021 Gabriel Somlo <gsomlo@gmail.com> + * + */ + +#include <linux/module.h> +#include <linux/litex.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/host.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> + +#define LITEX_PHY_CARDDETECT 0x00 +#define LITEX_PHY_CLOCKERDIV 0x04 +#define LITEX_PHY_INITIALIZE 0x08 +#define LITEX_PHY_WRITESTATUS 0x0C +#define LITEX_CORE_CMDARG 0x00 +#define LITEX_CORE_CMDCMD 0x04 +#define LITEX_CORE_CMDSND 0x08 +#define LITEX_CORE_CMDRSP 0x0C +#define LITEX_CORE_CMDEVT 0x1C +#define LITEX_CORE_DATAEVT 0x20 +#define LITEX_CORE_BLKLEN 0x24 +#define LITEX_CORE_BLKCNT 0x28 +#define LITEX_BLK2MEM_BASE 0x00 +#define LITEX_BLK2MEM_LEN 0x08 +#define LITEX_BLK2MEM_ENA 0x0C +#define LITEX_BLK2MEM_DONE 0x10 +#define LITEX_BLK2MEM_LOOP 0x14 +#define LITEX_MEM2BLK_BASE 0x00 +#define LITEX_MEM2BLK_LEN 0x08 +#define LITEX_MEM2BLK_ENA 0x0C +#define LITEX_MEM2BLK_DONE 0x10 +#define LITEX_MEM2BLK_LOOP 0x14 +#define LITEX_MEM2BLK 0x18 +#define LITEX_IRQ_STATUS 0x00 +#define LITEX_IRQ_PENDING 0x04 +#define LITEX_IRQ_ENABLE 0x08 + +#define SDCARD_CTRL_DATA_TRANSFER_NONE 0 +#define SDCARD_CTRL_DATA_TRANSFER_READ 1 +#define SDCARD_CTRL_DATA_TRANSFER_WRITE 2 + +#define SDCARD_CTRL_RESPONSE_NONE 0 +#define SDCARD_CTRL_RESPONSE_SHORT 1 +#define SDCARD_CTRL_RESPONSE_LONG 2 +#define SDCARD_CTRL_RESPONSE_SHORT_BUSY 3 + +#define SD_BIT_DONE BIT(0) +#define SD_BIT_WR_ERR BIT(1) +#define SD_BIT_TIMEOUT BIT(2) +#define SD_BIT_CRC_ERR BIT(3) + +#define SD_SLEEP_US 5 +#define SD_TIMEOUT_US 20000 + +#define SDIRQ_CARD_DETECT 1 +#define SDIRQ_SD_TO_MEM_DONE 2 +#define SDIRQ_MEM_TO_SD_DONE 4 +#define SDIRQ_CMD_DONE 8 + +struct litex_mmc_host { + struct mmc_host *mmc; + struct platform_device *dev; + + void __iomem *sdphy; + void __iomem *sdcore; + void __iomem *sdreader; + void __iomem *sdwriter; + void __iomem *sdirq; + + void *buffer; + size_t buf_size; + dma_addr_t dma; + + struct completion cmd_done; + int irq; + + unsigned int ref_clk; + unsigned int sd_clk; + + u32 resp[4]; + u16 rca; + + bool is_bus_width_set; + bool app_cmd; +}; + +static int litex_mmc_sdcard_wait_done(void __iomem *reg) +{ + u8 evt; + int ret; + + ret = readx_poll_timeout(litex_read8, reg, evt, (evt & SD_BIT_DONE), + SD_SLEEP_US, SD_TIMEOUT_US); + if (ret || (evt & SD_BIT_TIMEOUT)) + return -ETIMEDOUT; + if (evt == SD_BIT_DONE) + return 0; + if (evt & SD_BIT_WR_ERR) + return -EIO; + if (evt & SD_BIT_CRC_ERR) + return -EILSEQ; + pr_err("%s: unknown error evt=%x\n", __func__, evt); + return -EINVAL; +} + +static int litex_mmc_send_cmd(struct litex_mmc_host *host, + u8 cmd, u32 arg, u8 response_len, u8 transfer) +{ + struct device *dev = mmc_dev(host->mmc); + void __iomem *reg; + int ret; + u8 evt; + + litex_write32(host->sdcore + LITEX_CORE_CMDARG, arg); + litex_write32(host->sdcore + LITEX_CORE_CMDCMD, + cmd << 8 | transfer << 5 | response_len); + litex_write8(host->sdcore + LITEX_CORE_CMDSND, 1); + + /* Wait for an interrupt if we have an interrupt and either there is + * data to be transferred, or if the card can report busy via DAT0. + */ + if (host->irq > 0 && + (transfer != SDCARD_CTRL_DATA_TRANSFER_NONE || + response_len == SDCARD_CTRL_RESPONSE_SHORT_BUSY)) { + reinit_completion(&host->cmd_done); + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, + SDIRQ_CMD_DONE | SDIRQ_CARD_DETECT); + wait_for_completion(&host->cmd_done); + } + + ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_CMDEVT); + if (ret) { + dev_err(dev, "Command (cmd %d) error, status %d\n", cmd, ret); + return ret; + } + + if (response_len != SDCARD_CTRL_RESPONSE_NONE) { + int i; + + reg = host->sdcore + LITEX_CORE_CMDRSP; + for (i = 0; i < 4; i++) { + host->resp[i] = litex_read32(reg); + reg += sizeof(u32); + } + } + + if (!host->app_cmd && cmd == SD_SEND_RELATIVE_ADDR) + host->rca = (host->resp[3] >> 16) & 0xffff; + + host->app_cmd = (cmd == MMC_APP_CMD); + + if (transfer == SDCARD_CTRL_DATA_TRANSFER_NONE) + return ret; /* OK from prior litex_mmc_sdcard_wait_done() */ + + ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_DATAEVT); + if (ret) { + dev_err(dev, "Data xfer (cmd %d) error, status %d\n", cmd, ret); + return ret; + } + + /* wait for completion of (read or write) DMA transfer */ + reg = (transfer == SDCARD_CTRL_DATA_TRANSFER_READ) ? + host->sdreader + LITEX_BLK2MEM_DONE : + host->sdwriter + LITEX_MEM2BLK_DONE; + ret = readx_poll_timeout(litex_read8, reg, evt, (evt & SD_BIT_DONE), + SD_SLEEP_US, SD_TIMEOUT_US); + if (ret) + dev_err(dev, "DMA timeout (cmd %d)\n", cmd); + + return ret; +} + +static int litex_mmc_send_app_cmd(struct litex_mmc_host *host) +{ + return litex_mmc_send_cmd(host, MMC_APP_CMD, host->rca << 16, + SDCARD_CTRL_RESPONSE_SHORT, + SDCARD_CTRL_DATA_TRANSFER_NONE); +} + +static int litex_mmc_send_set_bus_w_cmd(struct litex_mmc_host *host, u32 width) +{ + return litex_mmc_send_cmd(host, SD_APP_SET_BUS_WIDTH, width, + SDCARD_CTRL_RESPONSE_SHORT, + SDCARD_CTRL_DATA_TRANSFER_NONE); +} + +static int litex_mmc_set_bus_width(struct litex_mmc_host *host) +{ + bool app_cmd_sent; + int ret; + + if (host->is_bus_width_set) + return 0; + + /* ensure 'app_cmd' precedes 'app_set_bus_width_cmd' */ + app_cmd_sent = host->app_cmd; /* was preceding command app_cmd? */ + if (!app_cmd_sent) { + ret = litex_mmc_send_app_cmd(host); + if (ret) + return ret; + } + + /* litesdcard only supports 4-bit bus width */ + ret = litex_mmc_send_set_bus_w_cmd(host, MMC_BUS_WIDTH_4); + if (ret) + return ret; + + /* re-send 'app_cmd' if necessary */ + if (app_cmd_sent) { + ret = litex_mmc_send_app_cmd(host); + if (ret) + return ret; + } + + host->is_bus_width_set = true; + + return 0; +} + +static int litex_mmc_get_cd(struct mmc_host *mmc) +{ + struct litex_mmc_host *host = mmc_priv(mmc); + int ret; + + if (!mmc_card_is_removable(mmc)) + return 1; + + ret = !litex_read8(host->sdphy + LITEX_PHY_CARDDETECT); + + /* ensure bus width will be set (again) upon card (re)insertion */ + if (ret == 0) + host->is_bus_width_set = false; + + return ret; +} + +static irqreturn_t litex_mmc_interrupt(int irq, void *arg) +{ + struct mmc_host *mmc = arg; + struct litex_mmc_host *host = mmc_priv(mmc); + u32 pending = litex_read32(host->sdirq + LITEX_IRQ_PENDING); + + /* Check for card change interrupt */ + if (pending & SDIRQ_CARD_DETECT) { + litex_write32(host->sdirq + LITEX_IRQ_PENDING, + SDIRQ_CARD_DETECT); + mmc_detect_change(mmc, msecs_to_jiffies(10)); + } + + /* Check for command completed */ + if (pending & SDIRQ_CMD_DONE) { + /* Disable it so it doesn't keep interrupting */ + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, + SDIRQ_CARD_DETECT); + complete(&host->cmd_done); + } + + return IRQ_HANDLED; +} + +static u32 litex_mmc_response_len(struct mmc_command *cmd) +{ + if (cmd->flags & MMC_RSP_136) + return SDCARD_CTRL_RESPONSE_LONG; + if (!(cmd->flags & MMC_RSP_PRESENT)) + return SDCARD_CTRL_RESPONSE_NONE; + if (cmd->flags & MMC_RSP_BUSY) + return SDCARD_CTRL_RESPONSE_SHORT_BUSY; + return SDCARD_CTRL_RESPONSE_SHORT; +} + +static void litex_mmc_do_dma(struct litex_mmc_host *host, struct mmc_data *data, + unsigned int *len, bool *direct, u8 *transfer) +{ + struct device *dev = mmc_dev(host->mmc); + dma_addr_t dma; + int sg_count; + + /* Try to DMA directly to/from the data buffer. + * We can do that if the buffer can be mapped for DMA + * in one contiguous chunk. + */ + dma = host->dma; + *len = data->blksz * data->blocks; + sg_count = dma_map_sg(dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); + if (sg_count == 1) { + dma = sg_dma_address(data->sg); + *len = sg_dma_len(data->sg); + *direct = true; + } else if (*len > host->buf_size) + *len = host->buf_size; + + if (data->flags & MMC_DATA_READ) { + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0); + litex_write64(host->sdreader + LITEX_BLK2MEM_BASE, dma); + litex_write32(host->sdreader + LITEX_BLK2MEM_LEN, *len); + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 1); + *transfer = SDCARD_CTRL_DATA_TRANSFER_READ; + } else if (data->flags & MMC_DATA_WRITE) { + if (!*direct) + sg_copy_to_buffer(data->sg, data->sg_len, + host->buffer, *len); + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0); + litex_write64(host->sdwriter + LITEX_MEM2BLK_BASE, dma); + litex_write32(host->sdwriter + LITEX_MEM2BLK_LEN, *len); + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 1); + *transfer = SDCARD_CTRL_DATA_TRANSFER_WRITE; + } else { + dev_warn(dev, "Data present w/o read or write flag.\n"); + /* Continue: set cmd status, mark req done */ + } + + litex_write16(host->sdcore + LITEX_CORE_BLKLEN, data->blksz); + litex_write32(host->sdcore + LITEX_CORE_BLKCNT, data->blocks); +} + +static void litex_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct litex_mmc_host *host = mmc_priv(mmc); + struct device *dev = mmc_dev(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_command *sbc = mrq->sbc; + struct mmc_data *data = mrq->data; + struct mmc_command *stop = mrq->stop; + unsigned int retries = cmd->retries; + unsigned int len = 0; + bool direct = false; + u32 response_len = litex_mmc_response_len(cmd); + u8 transfer = SDCARD_CTRL_DATA_TRANSFER_NONE; + + /* First check that the card is still there */ + if (!litex_mmc_get_cd(mmc)) { + cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + /* Send set-block-count command if needed */ + if (sbc) { + sbc->error = litex_mmc_send_cmd(host, sbc->opcode, sbc->arg, + litex_mmc_response_len(sbc), + SDCARD_CTRL_DATA_TRANSFER_NONE); + if (sbc->error) { + host->is_bus_width_set = false; + mmc_request_done(mmc, mrq); + return; + } + } + + if (data) { + /* LiteSDCard only supports 4-bit bus width; therefore, we MUST + * inject a SET_BUS_WIDTH (acmd6) before the very first data + * transfer, earlier than when the mmc subsystem would normally + * get around to it! + */ + cmd->error = litex_mmc_set_bus_width(host); + if (cmd->error) { + dev_err(dev, "Can't set bus width!\n"); + mmc_request_done(mmc, mrq); + return; + } + + litex_mmc_do_dma(host, data, &len, &direct, &transfer); + } + + do { + cmd->error = litex_mmc_send_cmd(host, cmd->opcode, cmd->arg, + response_len, transfer); + } while (cmd->error && retries-- > 0); + + if (cmd->error) { + /* card may be gone; don't assume bus width is still set */ + host->is_bus_width_set = false; + } + + if (response_len == SDCARD_CTRL_RESPONSE_SHORT) { + /* pull short response fields from appropriate host registers */ + cmd->resp[0] = host->resp[3]; + cmd->resp[1] = host->resp[2] & 0xFF; + } else if (response_len == SDCARD_CTRL_RESPONSE_LONG) { + cmd->resp[0] = host->resp[0]; + cmd->resp[1] = host->resp[1]; + cmd->resp[2] = host->resp[2]; + cmd->resp[3] = host->resp[3]; + } + + /* Send stop-transmission command if required */ + if (stop && (cmd->error || !sbc)) { + stop->error = litex_mmc_send_cmd(host, stop->opcode, stop->arg, + litex_mmc_response_len(stop), + SDCARD_CTRL_DATA_TRANSFER_NONE); + if (stop->error) + host->is_bus_width_set = false; + } + + if (data) { + dma_unmap_sg(dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); + } + + if (!cmd->error && transfer != SDCARD_CTRL_DATA_TRANSFER_NONE) { + data->bytes_xfered = min(len, mmc->max_req_size); + if (transfer == SDCARD_CTRL_DATA_TRANSFER_READ && !direct) { + sg_copy_from_buffer(data->sg, sg_nents(data->sg), + host->buffer, data->bytes_xfered); + } + } + + mmc_request_done(mmc, mrq); +} + +static void litex_mmc_setclk(struct litex_mmc_host *host, unsigned int freq) +{ + struct device *dev = mmc_dev(host->mmc); + u32 div; + + div = freq ? host->ref_clk / freq : 256U; + div = roundup_pow_of_two(div); + div = min(max(div, 2U), 256U); + dev_dbg(dev, "sd_clk_freq=%d: set to %d via div=%d\n", + freq, host->ref_clk / div, div); + litex_write16(host->sdphy + LITEX_PHY_CLOCKERDIV, div); + host->sd_clk = freq; +} + +static void litex_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct litex_mmc_host *host = mmc_priv(mmc); + + /* NOTE: Ignore any ios->bus_width updates; they occur right after + * the mmc core sends its own acmd6 bus-width change notification, + * which is redundant since we snoop on the command flow and inject + * an early acmd6 before the first data transfer command is sent! + */ + + /* update sd_clk */ + if (ios->clock != host->sd_clk) + litex_mmc_setclk(host, ios->clock); +} + +static const struct mmc_host_ops litex_mmc_ops = { + .get_cd = litex_mmc_get_cd, + .request = litex_mmc_request, + .set_ios = litex_mmc_set_ios, +}; + +static int litex_mmc_irq_init(struct litex_mmc_host *host) +{ + struct device *dev = mmc_dev(host->mmc); + int ret; + + host->irq = platform_get_irq_optional(host->dev, 0); + if (host->irq <= 0) { + dev_warn(dev, "Failed to get IRQ, using polling\n"); + goto use_polling; + } + + host->sdirq = devm_platform_ioremap_resource_byname(host->dev, "irq"); + if (IS_ERR(host->sdirq)) + return PTR_ERR(host->sdirq); + + ret = request_irq(host->irq, litex_mmc_interrupt, 0, + "litex-mmc", host->mmc); + if (ret < 0) { + dev_warn(dev, "IRQ request error %d, using polling\n", ret); + goto use_polling; + } + + /* clear & enable card-change interrupts */ + litex_write32(host->sdirq + LITEX_IRQ_PENDING, SDIRQ_CARD_DETECT); + litex_write32(host->sdirq + LITEX_IRQ_ENABLE, SDIRQ_CARD_DETECT); + + return 0; + +use_polling: + host->mmc->caps |= MMC_CAP_NEEDS_POLL; + host->irq = 0; + return 0; +} + +static int litex_mmc_probe(struct platform_device *pdev) +{ + struct litex_mmc_host *host; + struct mmc_host *mmc; + struct clk *clk; + int ret; + + mmc = mmc_alloc_host(sizeof(struct litex_mmc_host), &pdev->dev); + /* NOTE: defaults to max_[req,seg]_size=PAGE_SIZE, max_blk_size=512, + * and max_blk_count accordingly set to 8; + * If for some reason we need to modify max_blk_count, we must also + * re-calculate `max_[req,seg]_size = max_blk_size * max_blk_count;` + */ + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->mmc = mmc; + host->dev = pdev; + + /* initialize clock source */ + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + ret = dev_err_probe(&pdev->dev, + PTR_ERR(clk), "can't get clock\n"); + goto err; + } + host->ref_clk = clk_get_rate(clk); + host->sd_clk = 0; + + /* LiteSDCard only supports 4-bit bus width; therefore, we MUST inject + * a SET_BUS_WIDTH (acmd6) before the very first data transfer, earlier + * than when the mmc subsystem would normally get around to it! + */ + host->is_bus_width_set = false; + host->app_cmd = false; + +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT + /* increase from default 32 on 64-bit-DMA capable architectures */ + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (ret) + goto err; +#endif + + host->buf_size = mmc->max_req_size * 2; + host->buffer = dmam_alloc_coherent(&pdev->dev, host->buf_size, + &host->dma, GFP_DMA); + if (host->buffer == NULL) { + ret = -ENOMEM; + goto err; + } + + host->sdphy = devm_platform_ioremap_resource_byname(pdev, "phy"); + if (IS_ERR(host->sdphy)) { + ret = PTR_ERR(host->sdphy); + goto err; + } + + host->sdcore = devm_platform_ioremap_resource_byname(pdev, "core"); + if (IS_ERR(host->sdcore)) { + ret = PTR_ERR(host->sdcore); + goto err; + } + + host->sdreader = devm_platform_ioremap_resource_byname(pdev, "reader"); + if (IS_ERR(host->sdreader)) { + ret = PTR_ERR(host->sdreader); + goto err; + } + + host->sdwriter = devm_platform_ioremap_resource_byname(pdev, "writer"); + if (IS_ERR(host->sdwriter)) { + ret = PTR_ERR(host->sdwriter); + goto err; + } + + /* ensure DMA bus masters are disabled */ + litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0); + litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0); + + init_completion(&host->cmd_done); + ret = litex_mmc_irq_init(host); + if (ret) + goto err; + + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->ops = &litex_mmc_ops; + + /* set default sd_clk frequency range based on empirical observations + * of LiteSDCard gateware behavior on typical SDCard media + */ + mmc->f_min = 12.5e6; + mmc->f_max = 50e6; + + ret = mmc_of_parse(mmc); + if (ret) + goto err; + + /* force 4-bit bus_width (only width supported by hardware) */ + mmc->caps &= ~MMC_CAP_8_BIT_DATA; + mmc->caps |= MMC_CAP_4_BIT_DATA; + + /* set default capabilities */ + mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | + MMC_CAP_DRIVER_TYPE_D | + MMC_CAP_CMD23; + mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT | + MMC_CAP2_FULL_PWR_CYCLE | + MMC_CAP2_NO_SDIO; + + platform_set_drvdata(pdev, host); + + ret = mmc_add_host(mmc); + if (ret < 0) + goto err; + + return 0; + +err: + mmc_free_host(mmc); + return ret; +} + +static int litex_mmc_remove(struct platform_device *pdev) +{ + struct litex_mmc_host *host = dev_get_drvdata(&pdev->dev); + + if (host->irq > 0) + free_irq(host->irq, host->mmc); + mmc_remove_host(host->mmc); + mmc_free_host(host->mmc); + + return 0; +} + +static const struct of_device_id litex_match[] = { + { .compatible = "litex,mmc" }, + { } +}; +MODULE_DEVICE_TABLE(of, litex_match); + +static struct platform_driver litex_mmc_driver = { + .probe = litex_mmc_probe, + .remove = litex_mmc_remove, + .driver = { + .name = "litex-mmc", + .of_match_table = of_match_ptr(litex_match), + }, +}; +module_platform_driver(litex_mmc_driver); + +MODULE_DESCRIPTION("LiteX SDCard driver"); +MODULE_AUTHOR("Antmicro <contact@antmicro.com>"); +MODULE_AUTHOR("Kamil Rakoczy <krakoczy@antmicro.com>"); +MODULE_AUTHOR("Maciej Dudek <mdudek@internships.antmicro.com>"); +MODULE_AUTHOR("Paul Mackerras <paulus@ozlabs.org>"); +MODULE_AUTHOR("Gabriel Somlo <gsomlo@gmail.com>"); +MODULE_LICENSE("GPL v2");