Message ID | 20211209173009.618162-1-thierry.reding@gmail.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | ARM: dts: Remove unsupported properties for STMPE MFD | expand |
On 09-12-21, 18:30, Thierry Reding wrote: > From: Thierry Reding <treding@nvidia.com> > > Some users of the STMPE MFD bindings use unsupported properties such as > "id", "blocks" and "irq-trigger". These look like they may have been > under discussion at some point but never made it into the bindings that > were accepted upstream. > > Remove these unknown properties from the device trees to avoid errors > during validation against the DT schema. > > Signed-off-by: Thierry Reding <treding@nvidia.com> > --- > arch/arm/boot/dts/spear1310-evb.dts | 1 - > arch/arm/boot/dts/spear1340-evb.dts | 2 -- > arch/arm/boot/dts/spear320-hmi.dts | 3 --- Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
* Thierry Reding <thierry.reding@gmail.com> [211209 17:30]: > From: Thierry Reding <treding@nvidia.com> > > Some users of the STMPE MFD bindings use unsupported properties such as > "id", "blocks" and "irq-trigger". These look like they may have been > under discussion at some point but never made it into the bindings that > were accepted upstream. > > Remove these unknown properties from the device trees to avoid errors > during validation against the DT schema. Acked-by: Tony Lindgren <tony@atomide.com>
On Thu, Dec 09, 2021 at 06:30:09PM +0100, Thierry Reding wrote: > From: Thierry Reding <treding@nvidia.com> > > Some users of the STMPE MFD bindings use unsupported properties such as > "id", "blocks" and "irq-trigger". These look like they may have been > under discussion at some point but never made it into the bindings that > were accepted upstream. > > Remove these unknown properties from the device trees to avoid errors > during validation against the DT schema. > > Signed-off-by: Thierry Reding <treding@nvidia.com> > --- ... > arch/arm/boot/dts/imx53-m53.dtsi | 3 --- > arch/arm/boot/dts/imx6q-novena.dts | 3 --- > arch/arm/boot/dts/imx6qdl-apalis.dtsi | 3 --- > arch/arm/boot/dts/imx6qdl-colibri.dtsi | 3 --- Acked-by: Shawn Guo <shawnguo@kernel.org>
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts index 149cfafb90bf..ab5b2e3b2b65 100644 --- a/arch/arm/boot/dts/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -416,9 +416,6 @@ stmpe811@41 { interrupts = <30 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio2>; interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; st,mod-12b = <1>; /* 12-bit ADC */ st,ref-sel = <0>; /* internal ADC reference */ st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 22c3086e0076..8f5fbb4125b7 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -169,7 +169,6 @@ adc@41 { interrupt-parent = <&gpx0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; - irq-trigger = <0x1>; st,adc-freq = <3>; st,mod-12b = <1>; st,ref-sel = <0>; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index fe5e0d308e99..e5c43cb6f784 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -49,11 +49,8 @@ &i2c2 { touchscreen@41 { compatible = "st,stmpe610"; reg = <0x41>; - id = <0>; - blocks = <0x5>; interrupts = <6 0x0>; interrupt-parent = <&gpio7>; - irq-trigger = <0x1>; stmpe_touchscreen { compatible = "st,stmpe-ts"; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 225cf6b7a7a4..448a09369e18 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -280,9 +280,6 @@ touch: stmpe811@44 { compatible = "st,stmpe811"; reg = <0x44>; irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_stmpe_novena>; vio-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index ed2739e39085..5e36fc7015cd 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -301,9 +301,6 @@ stmpe811@41 { interrupts = <10 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio4>; interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 4e2a309c93fa..c2f3cb633ac8 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -246,9 +246,6 @@ stmpe811@41 { interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8fcb6be6e7c7..29a26995c82e 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -363,7 +363,6 @@ stmpe610@0 { pl022,duplex = <0>; interrupts = <6 0x4>; interrupt-parent = <&gpio1>; - irq-trigger = <0x2>; stmpe_touchscreen { compatible = "st,stmpe-ts"; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index f70ff56d4542..58136577a6a1 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -319,7 +319,6 @@ stmpe801@41 { reg = <0x41>; interrupts = <4 0x4>; interrupt-parent = <&gpio0>; - irq-trigger = <0x2>; stmpegpio: stmpe_gpio { compatible = "st,stmpe-gpio"; @@ -472,7 +471,6 @@ stmpe610@1 { pl022,duplex = <0>; interrupts = <100 0>; interrupt-parent = <&gpiopinctrl>; - irq-trigger = <0x2>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 367ba48aac3e..f522c5cca4e9 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -237,9 +237,6 @@ stmpe811@41 { reg = <0x41>; irq-over-gpio; irq-gpios = <&gpiopinctrl 29 0x4>; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; stmpegpio: stmpe-gpio { compatible = "stmpe,gpio"; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 6a3a72f81c44..e4e17c0e01fd 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -992,9 +992,6 @@ touchscreen@41 { reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index b2ac51fb15b1..28e7d445c076 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -975,9 +975,6 @@ touchscreen@41 { reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 413e35215804..88b7f2925e9e 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -844,9 +844,6 @@ touchscreen@41 { reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */