Message ID | 20211216124655.32247-2-zhengqi.arch@bytedance.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | add MemAvailable to per-node meminfo | expand |
On Thu, Dec 16, 2021 at 08:46:54PM +0800, Qi Zheng wrote: > In /proc/meminfo, we can show the sum of all the available memory > as "MemAvailable". Add the same counter also to per-node meminfo > under /sys. > > With this counter, some processes that bind nodes can make some > decisions by reading the "MemAvailable" of the corresponding nodes > directly. > > Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> > --- > drivers/base/node.c | 4 ++++ > include/linux/mm.h | 1 + > include/linux/mmzone.h | 5 +++++ > mm/page_alloc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 59 insertions(+) > > diff --git a/drivers/base/node.c b/drivers/base/node.c > index 87acc47e8951..deb2a7965ae4 100644 > --- a/drivers/base/node.c > +++ b/drivers/base/node.c > @@ -375,8 +375,10 @@ static ssize_t node_read_meminfo(struct device *dev, > struct sysinfo i; > unsigned long sreclaimable, sunreclaimable; > unsigned long swapcached = 0; > + long available; > > si_meminfo_node(&i, nid); > + available = si_mem_available_node(&i, nid); > sreclaimable = node_page_state_pages(pgdat, NR_SLAB_RECLAIMABLE_B); > sunreclaimable = node_page_state_pages(pgdat, NR_SLAB_UNRECLAIMABLE_B); > #ifdef CONFIG_SWAP > @@ -386,6 +388,7 @@ static ssize_t node_read_meminfo(struct device *dev, > "Node %d MemTotal: %8lu kB\n" > "Node %d MemFree: %8lu kB\n" > "Node %d MemUsed: %8lu kB\n" > + "Node %d MemAvailable: %8lu kB\n" You just changed a user/kernel api without documenting it anywhere, or ensuring that you did not just break anything. Also, this api is crazy, and not ok, please never add anything new to it, it is broken as-is. thanks, greg k-h
On 12/16/21 9:16 PM, Greg KH wrote: > On Thu, Dec 16, 2021 at 08:46:54PM +0800, Qi Zheng wrote: >> In /proc/meminfo, we can show the sum of all the available memory >> as "MemAvailable". Add the same counter also to per-node meminfo >> under /sys. >> >> With this counter, some processes that bind nodes can make some >> decisions by reading the "MemAvailable" of the corresponding nodes >> directly. >> >> Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> >> --- >> drivers/base/node.c | 4 ++++ >> include/linux/mm.h | 1 + >> include/linux/mmzone.h | 5 +++++ >> mm/page_alloc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ >> 4 files changed, 59 insertions(+) >> >> diff --git a/drivers/base/node.c b/drivers/base/node.c >> index 87acc47e8951..deb2a7965ae4 100644 >> --- a/drivers/base/node.c >> +++ b/drivers/base/node.c >> @@ -375,8 +375,10 @@ static ssize_t node_read_meminfo(struct device *dev, >> struct sysinfo i; >> unsigned long sreclaimable, sunreclaimable; >> unsigned long swapcached = 0; >> + long available; >> >> si_meminfo_node(&i, nid); >> + available = si_mem_available_node(&i, nid); >> sreclaimable = node_page_state_pages(pgdat, NR_SLAB_RECLAIMABLE_B); >> sunreclaimable = node_page_state_pages(pgdat, NR_SLAB_UNRECLAIMABLE_B); >> #ifdef CONFIG_SWAP >> @@ -386,6 +388,7 @@ static ssize_t node_read_meminfo(struct device *dev, >> "Node %d MemTotal: %8lu kB\n" >> "Node %d MemFree: %8lu kB\n" >> "Node %d MemUsed: %8lu kB\n" >> + "Node %d MemAvailable: %8lu kB\n" > > You just changed a user/kernel api without documenting it anywhere, or > ensuring that you did not just break anything. Hi greg k-h, The MemAvailable has long existed in the /proc/meminfo, it's meaning has been described in the Documentation/filesystems/proc.rst. Since the semantics of per-node MemAvailable has not changed, so I did not add a new document description. > > Also, this api is crazy, and not ok, please never add anything new to > it, it is broken as-is. The consideration of adding per-node MemAvailable is that some processes that bind nodes need this information to do some decisions. Now their approach is to read other information in per-node meminfo and /proc/sys/vm/watermark_scale_factor, and then approximate this value. With this counter, they can directly read /sys/devices/system/node/node*/meminfo to get the MemAvailable information of each node. And MemTotal, MemFree and SReclaimable(etc.) all have corresponding per-node versions, so I think that adding per-node MemAvailable might also make sense. :) Thanks, Qi > > thanks, > > greg k-h >
On Thu, Dec 16, 2021 at 11:31:36PM +0800, Qi Zheng wrote: > > > On 12/16/21 9:16 PM, Greg KH wrote: > > On Thu, Dec 16, 2021 at 08:46:54PM +0800, Qi Zheng wrote: > > > In /proc/meminfo, we can show the sum of all the available memory > > > as "MemAvailable". Add the same counter also to per-node meminfo > > > under /sys. > > > > > > With this counter, some processes that bind nodes can make some > > > decisions by reading the "MemAvailable" of the corresponding nodes > > > directly. > > > > > > Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> > > > --- > > > drivers/base/node.c | 4 ++++ > > > include/linux/mm.h | 1 + > > > include/linux/mmzone.h | 5 +++++ > > > mm/page_alloc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ > > > 4 files changed, 59 insertions(+) > > > > > > diff --git a/drivers/base/node.c b/drivers/base/node.c > > > index 87acc47e8951..deb2a7965ae4 100644 > > > --- a/drivers/base/node.c > > > +++ b/drivers/base/node.c > > > @@ -375,8 +375,10 @@ static ssize_t node_read_meminfo(struct device *dev, > > > struct sysinfo i; > > > unsigned long sreclaimable, sunreclaimable; > > > unsigned long swapcached = 0; > > > + long available; > > > si_meminfo_node(&i, nid); > > > + available = si_mem_available_node(&i, nid); > > > sreclaimable = node_page_state_pages(pgdat, NR_SLAB_RECLAIMABLE_B); > > > sunreclaimable = node_page_state_pages(pgdat, NR_SLAB_UNRECLAIMABLE_B); > > > #ifdef CONFIG_SWAP > > > @@ -386,6 +388,7 @@ static ssize_t node_read_meminfo(struct device *dev, > > > "Node %d MemTotal: %8lu kB\n" > > > "Node %d MemFree: %8lu kB\n" > > > "Node %d MemUsed: %8lu kB\n" > > > + "Node %d MemAvailable: %8lu kB\n" > > > > You just changed a user/kernel api without documenting it anywhere, or > > ensuring that you did not just break anything. > > Hi greg k-h, > > The MemAvailable has long existed in the /proc/meminfo, it's meaning > has been described in the Documentation/filesystems/proc.rst. Since > the semantics of per-node MemAvailable has not changed, so I did not > add a new document description. This is not a proc file, it is in sysfs. And it violates all of the sysfs rules, and has all of the problems that proc files have. So the worst of both worlds :( > > Also, this api is crazy, and not ok, please never add anything new to > > it, it is broken as-is. > > The consideration of adding per-node MemAvailable is that some processes > that bind nodes need this information to do some decisions. > > Now their approach is to read other information in per-node meminfo > and /proc/sys/vm/watermark_scale_factor, and then approximate this > value. With this counter, they can directly read > /sys/devices/system/node/node*/meminfo to get the MemAvailable > information of each node. > > And MemTotal, MemFree and SReclaimable(etc.) all have corresponding > per-node versions, so I think that adding per-node MemAvailable might > also make sense. :) Please no, I do not want new things added to this file, as you might break parsers of this file. Also, again, you did not document this at all in Documentation/ABI/ so for that reason alone it is not ok. thanks, greg k-h
On 12/16/21 11:37 PM, Greg KH wrote: > On Thu, Dec 16, 2021 at 11:31:36PM +0800, Qi Zheng wrote: >> >> >> On 12/16/21 9:16 PM, Greg KH wrote: >>> On Thu, Dec 16, 2021 at 08:46:54PM +0800, Qi Zheng wrote: >>>> In /proc/meminfo, we can show the sum of all the available memory >>>> as "MemAvailable". Add the same counter also to per-node meminfo >>>> under /sys. >>>> >>>> With this counter, some processes that bind nodes can make some >>>> decisions by reading the "MemAvailable" of the corresponding nodes >>>> directly. >>>> >>>> Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> >>>> --- >>>> drivers/base/node.c | 4 ++++ >>>> include/linux/mm.h | 1 + >>>> include/linux/mmzone.h | 5 +++++ >>>> mm/page_alloc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ >>>> 4 files changed, 59 insertions(+) >>>> >>>> diff --git a/drivers/base/node.c b/drivers/base/node.c >>>> index 87acc47e8951..deb2a7965ae4 100644 >>>> --- a/drivers/base/node.c >>>> +++ b/drivers/base/node.c >>>> @@ -375,8 +375,10 @@ static ssize_t node_read_meminfo(struct device *dev, >>>> struct sysinfo i; >>>> unsigned long sreclaimable, sunreclaimable; >>>> unsigned long swapcached = 0; >>>> + long available; >>>> si_meminfo_node(&i, nid); >>>> + available = si_mem_available_node(&i, nid); >>>> sreclaimable = node_page_state_pages(pgdat, NR_SLAB_RECLAIMABLE_B); >>>> sunreclaimable = node_page_state_pages(pgdat, NR_SLAB_UNRECLAIMABLE_B); >>>> #ifdef CONFIG_SWAP >>>> @@ -386,6 +388,7 @@ static ssize_t node_read_meminfo(struct device *dev, >>>> "Node %d MemTotal: %8lu kB\n" >>>> "Node %d MemFree: %8lu kB\n" >>>> "Node %d MemUsed: %8lu kB\n" >>>> + "Node %d MemAvailable: %8lu kB\n" >>> >>> You just changed a user/kernel api without documenting it anywhere, or >>> ensuring that you did not just break anything. >> >> Hi greg k-h, >> >> The MemAvailable has long existed in the /proc/meminfo, it's meaning >> has been described in the Documentation/filesystems/proc.rst. Since >> the semantics of per-node MemAvailable has not changed, so I did not >> add a new document description. > > This is not a proc file, it is in sysfs. > > And it violates all of the sysfs rules, and has all of the problems that > proc files have. So the worst of both worlds :( > >>> Also, this api is crazy, and not ok, please never add anything new to >>> it, it is broken as-is. >> >> The consideration of adding per-node MemAvailable is that some processes >> that bind nodes need this information to do some decisions. >> >> Now their approach is to read other information in per-node meminfo >> and /proc/sys/vm/watermark_scale_factor, and then approximate this >> value. With this counter, they can directly read >> /sys/devices/system/node/node*/meminfo to get the MemAvailable >> information of each node. >> >> And MemTotal, MemFree and SReclaimable(etc.) all have corresponding >> per-node versions, so I think that adding per-node MemAvailable might >> also make sense. :) > > Please no, I do not want new things added to this file, as you might > break parsers of this file. OK, Got it. Thank, Qi > > Also, again, you did not document this at all in Documentation/ABI/ so > for that reason alone it is not ok. > > thanks, > > greg k-h >
diff --git a/drivers/base/node.c b/drivers/base/node.c index 87acc47e8951..deb2a7965ae4 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -375,8 +375,10 @@ static ssize_t node_read_meminfo(struct device *dev, struct sysinfo i; unsigned long sreclaimable, sunreclaimable; unsigned long swapcached = 0; + long available; si_meminfo_node(&i, nid); + available = si_mem_available_node(&i, nid); sreclaimable = node_page_state_pages(pgdat, NR_SLAB_RECLAIMABLE_B); sunreclaimable = node_page_state_pages(pgdat, NR_SLAB_UNRECLAIMABLE_B); #ifdef CONFIG_SWAP @@ -386,6 +388,7 @@ static ssize_t node_read_meminfo(struct device *dev, "Node %d MemTotal: %8lu kB\n" "Node %d MemFree: %8lu kB\n" "Node %d MemUsed: %8lu kB\n" + "Node %d MemAvailable: %8lu kB\n" "Node %d SwapCached: %8lu kB\n" "Node %d Active: %8lu kB\n" "Node %d Inactive: %8lu kB\n" @@ -398,6 +401,7 @@ static ssize_t node_read_meminfo(struct device *dev, nid, K(i.totalram), nid, K(i.freeram), nid, K(i.totalram - i.freeram), + nid, K(available), nid, K(swapcached), nid, K(node_page_state(pgdat, NR_ACTIVE_ANON) + node_page_state(pgdat, NR_ACTIVE_FILE)), diff --git a/include/linux/mm.h b/include/linux/mm.h index 1d4f731a8e18..34a5f5df388b 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -2532,6 +2532,7 @@ extern void mem_init(void); extern void __init mmap_init(void); extern void show_mem(unsigned int flags, nodemask_t *nodemask); extern long si_mem_available(void); +extern long si_mem_available_node(struct sysinfo *val, int nid); extern void si_meminfo(struct sysinfo * val); extern void si_meminfo_node(struct sysinfo *val, int nid); #ifdef __HAVE_ARCH_RESERVED_KERNEL_PAGES diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 936dc0b6c226..321c12f6272f 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1132,6 +1132,11 @@ extern struct zone *next_zone(struct zone *zone); ; /* do nothing */ \ else +#define for_each_pgdat_zone(pgdat, zone) \ + for (zone = (pgdat)->node_zones; \ + zone < (pgdat)->node_zones + MAX_NR_ZONES - 1 && zone; \ + zone++) + static inline struct zone *zonelist_zone(struct zoneref *zoneref) { return zoneref->zone; diff --git a/mm/page_alloc.c b/mm/page_alloc.c index edfd6c81af82..31f5e3e335cf 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5731,6 +5731,55 @@ static inline void show_node(struct zone *zone) printk("Node %d ", zone_to_nid(zone)); } +/** + * si_mem_available_node - helper to calculate the size of available memory + * of the given node + * @val: pointer to struct sysinfo + * @nid: the node id + */ +long si_mem_available_node(struct sysinfo *val, int nid) +{ + long available; + unsigned long pagecache; + unsigned long reclaimable; + unsigned long wmark_low = 0; + struct pglist_data *pgdat = NODE_DATA(nid); + struct zone *zone; + + for_each_pgdat_zone(pgdat, zone) + wmark_low += low_wmark_pages(zone); + + /* + * Estimate the amount of memory available for userspace allocations, + * without causing swapping. + */ + available = val->freeram - pgdat->totalreserve_pages; + + /* + * Not all the page cache can be freed, otherwise the system will + * start swapping. Assume at least half of the page cache, or the + * low watermark worth of cache, needs to stay. + */ + pagecache = node_page_state(pgdat, NR_ACTIVE_FILE) + + node_page_state(pgdat, NR_INACTIVE_FILE); + pagecache -= min(pagecache / 2, wmark_low); + available += pagecache; + + /* + * Part of the reclaimable slab and other kernel memory consists of + * items that are in use, and cannot be freed. Cap this estimate at the + * low watermark. + */ + reclaimable = node_page_state_pages(pgdat, NR_SLAB_RECLAIMABLE_B) + + node_page_state(pgdat, NR_KERNEL_MISC_RECLAIMABLE); + reclaimable -= min(reclaimable / 2, wmark_low); + available += reclaimable; + + if (available < 0) + available = 0; + return available; +} + long si_mem_available(void) { long available;
In /proc/meminfo, we can show the sum of all the available memory as "MemAvailable". Add the same counter also to per-node meminfo under /sys. With this counter, some processes that bind nodes can make some decisions by reading the "MemAvailable" of the corresponding nodes directly. Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> --- drivers/base/node.c | 4 ++++ include/linux/mm.h | 1 + include/linux/mmzone.h | 5 +++++ mm/page_alloc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 59 insertions(+)