diff mbox series

[net-next] net: phy: micrel: Adding interrupt support for Link up/Link down in LAN8814 Quad phy

Message ID 20211221070502.14811-1-Divya.Koppera@microchip.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [net-next] net: phy: micrel: Adding interrupt support for Link up/Link down in LAN8814 Quad phy | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 89 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Divya Koppera Dec. 21, 2021, 7:05 a.m. UTC 
This patch add support for Link up or Link down
interrupt support in LAN8814 Quad phy.

Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
---
 drivers/net/phy/micrel.c | 71 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Comments

Andrew Lunn Dec. 21, 2021, 9 a.m. UTC | #1 
On Tue, Dec 21, 2021 at 12:35:02PM +0530, Divya Koppera wrote:
> This patch add support for Link up or Link down
> interrupt support in LAN8814 Quad phy.
> 
> Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
> ---
>  drivers/net/phy/micrel.c | 71 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 44a24b99c894..46931020ef84 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -66,6 +66,23 @@
>  #define KSZ8081_LMD_SHORT_INDICATOR		BIT(12)
>  #define KSZ8081_LMD_DELTA_TIME_MASK		GENMASK(8, 0)
>  
> +/* Lan8814 general Interrupt control/status reg in GPHY specific block. */
> +#define LAN8814_INTC				0x18
> +#define LAN8814_INTC_LINK_DOWN			BIT(2)
> +#define LAN8814_INTC_LINK_UP			BIT(0)
> +#define LAN8814_INTC_LINK			(LAN8814_INTC_LINK_UP |\
> +						 LAN8814_INTC_LINK_DOWN)
> +
> +#define LAN8814_INTS				0x1B
> +#define LAN8814_INTS_LINK_DOWN			BIT(2)
> +#define LAN8814_INTS_LINK_UP			BIT(0)
> +#define LAN8814_INTS_LINK			(LAN8814_INTS_LINK_UP |\

I've never seen an interrupt controller where the interrupt control
bits and the interrupt status bits are different. So just define the
two interesting bits as LAN8814_INT_LINK_DOWN and LAN8814_INT_LINK_UP
and share them across the two registers.

Otherwise this looks good.

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 44a24b99c894..46931020ef84 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -66,6 +66,23 @@ 
 #define KSZ8081_LMD_SHORT_INDICATOR		BIT(12)
 #define KSZ8081_LMD_DELTA_TIME_MASK		GENMASK(8, 0)
 
+/* Lan8814 general Interrupt control/status reg in GPHY specific block. */
+#define LAN8814_INTC				0x18
+#define LAN8814_INTC_LINK_DOWN			BIT(2)
+#define LAN8814_INTC_LINK_UP			BIT(0)
+#define LAN8814_INTC_LINK			(LAN8814_INTC_LINK_UP |\
+						 LAN8814_INTC_LINK_DOWN)
+
+#define LAN8814_INTS				0x1B
+#define LAN8814_INTS_LINK_DOWN			BIT(2)
+#define LAN8814_INTS_LINK_UP			BIT(0)
+#define LAN8814_INTS_LINK			(LAN8814_INTS_LINK_UP |\
+						 LAN8814_INTS_LINK_DOWN)
+
+#define LAN8814_INTR_CTRL_REG			0x34
+#define LAN8814_INTR_CTRL_REG_POLARITY		BIT(1)
+#define LAN8814_INTR_CTRL_REG_INTR_ENABLE	BIT(0)
+
 /* PHY Control 1 */
 #define MII_KSZPHY_CTRL_1			0x1e
 #define KSZ8081_CTRL1_MDIX_STAT			BIT(4)
@@ -1620,6 +1637,58 @@  static int lan8804_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static irqreturn_t lan8814_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, LAN8814_INTS);
+	if (irq_status < 0)
+		return IRQ_NONE;
+
+	if (!(irq_status & LAN8814_INTS_LINK))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int lan8814_ack_interrupt(struct phy_device *phydev)
+{
+	/* bit[12..0] int status, which is a read and clear register. */
+	int rc;
+
+	rc = phy_read(phydev, LAN8814_INTS);
+
+	return (rc < 0) ? rc : 0;
+}
+
+static int lan8814_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	lanphy_write_page_reg(phydev, 4, LAN8814_INTR_CTRL_REG,
+			      LAN8814_INTR_CTRL_REG_POLARITY |
+			      LAN8814_INTR_CTRL_REG_INTR_ENABLE);
+
+	/* enable / disable interrupts */
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = lan8814_ack_interrupt(phydev);
+		if (err)
+			return err;
+
+		err =  phy_write(phydev, LAN8814_INTC, LAN8814_INTC_LINK);
+	} else {
+		err =  phy_write(phydev, LAN8814_INTC, 0);
+		if (err)
+			return err;
+
+		err = lan8814_ack_interrupt(phydev);
+	}
+
+	return err;
+}
+
 static struct phy_driver ksphy_driver[] = {
 {
 	.phy_id		= PHY_ID_KS8737,
@@ -1802,6 +1871,8 @@  static struct phy_driver ksphy_driver[] = {
 	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= kszphy_resume,
+	.config_intr	= lan8814_config_intr,
+	.handle_interrupt = lan8814_handle_interrupt,
 }, {
 	.phy_id		= PHY_ID_LAN8804,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,