diff mbox series

arm64: dts: add support for S4 based Amlogic AQ222

Message ID 20211206100209.31971-1-xianwei.zhao@amlogic.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: add support for S4 based Amlogic AQ222 | expand

Commit Message

Xianwei Zhao Dec. 6, 2021, 10:02 a.m. UTC 
Add basic support for the Amlogic S4 based Amlogic AQ222 board:
which describe components as follows: CPU, GIC, IRQ, Timer, UART.
It's capable of booting up into the serial console.

Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../dts/amlogic/meson-s4-s805x2-aq222.dts     | 30 ++++++
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi     | 98 +++++++++++++++++++
 3 files changed, 129 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi


base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152

Comments

Neil Armstrong Dec. 6, 2021, 10:57 a.m. UTC | #1 
Hi,

On 06/12/2021 11:02, xianwei.zhao wrote:
> Add basic support for the Amlogic S4 based Amlogic AQ222 board:
> which describe components as follows: CPU, GIC, IRQ, Timer, UART.
> It's capable of booting up into the serial console.
> 
> Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>  .../dts/amlogic/meson-s4-s805x2-aq222.dts     | 30 ++++++
>  arch/arm64/boot/dts/amlogic/meson-s4.dtsi     | 98 +++++++++++++++++++
>  3 files changed, 129 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 5148cd9e5146..faea74a45994 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> new file mode 100644
> index 000000000000..6b6ecb40be4a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-s4.dtsi"
> +
> +/ {
> +	model = "Amlogic";

Please change to something like "Amlogic Meson S4 AQ222 Development Board"

> +	compatible = "amlogic, aq222";

Drop the space after amlogic, and add "amlogic,aq222" to the Documentation/devicetree/bindings/arm/amlogic.yaml bindings.

You will probably need to add a new "amlogic,s4" family compatibla aswell.

> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart_B;
> +	};
> +
> +	memory@00000000 {
> +		device_type = "memory";
> +		linux,usable-memory = <0x0 0x0 0x0 0x40000000>;

Drop linux,usable-memory in favor or reg

> +	};
> +
> +};
> +
> +&uart_B {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> new file mode 100644
> index 000000000000..b66f62701063
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>

Add blank line hiere

> +/ {
> +	cpus:cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0:cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU1:cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU2:cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x2>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU3:cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 0xff08>,
> +			     <GIC_PPI 14 0xff08>,
> +			     <GIC_PPI 11 0xff08>,
> +			     <GIC_PPI 10 0xff08>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gic: interrupt-controller@fff01000 {
> +			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x0 0xfff01000 0 0x1000>,
> +			      <0x0 0xfff02000 0 0x0100>;
> +			interrupts = <GIC_PPI 9 0xf04>;
> +		};
> +
> +		apb4: apb4@fe000000 {
> +			compatible = "simple-bus";
> +			reg = <0x0 0xfe000000 0x0 0x480000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> +			uart_B: serial@7a000 {
> +				compatible = "amlogic,meson-gx-uart",
> +					     "amlogic,meson-ao-uart";

use the proper compatibles for s4


> +				reg = <0x0 0x7a000 0x0 0x18>;
> +				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +				xtal_tick_en = <1>;

Drop this property

> +				fifo-size = <64>;

No need to specify if 64

> +			};
> +		};
> +	};
> +};
> 
> base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152
> 

Thanks,
Neil
Marc Zyngier Dec. 6, 2021, 12:53 p.m. UTC | #2 
On 2021-12-06 10:02, xianwei.zhao wrote:
> Add basic support for the Amlogic S4 based Amlogic AQ222 board:
> which describe components as follows: CPU, GIC, IRQ, Timer, UART.
> It's capable of booting up into the serial console.
> 
> Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>  .../dts/amlogic/meson-s4-s805x2-aq222.dts     | 30 ++++++
>  arch/arm64/boot/dts/amlogic/meson-s4.dtsi     | 98 +++++++++++++++++++
>  3 files changed, 129 insertions(+)
>  create mode 100644 
> arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile
> b/arch/arm64/boot/dts/amlogic/Makefile
> index 5148cd9e5146..faea74a45994 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> new file mode 100644
> index 000000000000..6b6ecb40be4a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-s4.dtsi"
> +
> +/ {
> +	model = "Amlogic";
> +	compatible = "amlogic, aq222";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart_B;
> +	};
> +
> +	memory@00000000 {
> +		device_type = "memory";
> +		linux,usable-memory = <0x0 0x0 0x0 0x40000000>;
> +	};
> +
> +};
> +
> +&uart_B {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> new file mode 100644
> index 000000000000..b66f62701063
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +/ {
> +	cpus:cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0:cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU1:cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU2:cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x2>;
> +			enable-method = "psci";
> +		};
> +
> +		CPU3:cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35","arm,armv8";
> +			reg = <0x0 0x3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 0xff08>,
> +			     <GIC_PPI 14 0xff08>,
> +			     <GIC_PPI 11 0xff08>,
> +			     <GIC_PPI 10 0xff08>;

You only have 4 CPUs, so the affinity is wrong. Please use
symbolic constants for all the PPIs.

> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gic: interrupt-controller@fff01000 {
> +			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";

Neither, really. It cannot be an A9 GIC (you have virtualisation),
and because on an ARMv8 system, it is the CPU that implements
the CPU interface, this cannot be a A15 GIC either.

This is most likely yet another GIC400.

> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x0 0xfff01000 0 0x1000>,
> +			      <0x0 0xfff02000 0 0x0100>;

256 bytes? where are you getting this value from? You are also missing
the GICH and GICV regions, despite describing a maintenance interrupt...

> +			interrupts = <GIC_PPI 9 0xf04>;
> +		};
> +
> +		apb4: apb4@fe000000 {
> +			compatible = "simple-bus";
> +			reg = <0x0 0xfe000000 0x0 0x480000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> +			uart_B: serial@7a000 {
> +				compatible = "amlogic,meson-gx-uart",
> +					     "amlogic,meson-ao-uart";
> +				reg = <0x0 0x7a000 0x0 0x18>;
> +				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +				clocks = <&xtal>, <&xtal>, <&xtal>;
> +				clock-names = "xtal", "pclk", "baud";
> +				xtal_tick_en = <1>;
> +				fifo-size = <64>;
> +			};
> +		};
> +	};
> +};
> 
> base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152

Thanks,

         M.
Martin Blumenstingl Dec. 6, 2021, 9:25 p.m. UTC | #3 
Hi,

On Mon, Dec 6, 2021 at 11:57 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> > +/ {
> > +     model = "Amlogic";
>
> Please change to something like "Amlogic Meson S4 AQ222 Development Board"
>
> > +     compatible = "amlogic, aq222";
>
> Drop the space after amlogic, and add "amlogic,aq222" to the Documentation/devicetree/bindings/arm/amlogic.yaml bindings.
You can follow the approach from the Amlogic A1 SoC bringup, see
patches [0] and [1]

> You will probably need to add a new "amlogic,s4" family compatibla aswell.
For this (and various other code-review comments) you can also follow
the Amlogic A1 SoC (and AD401 board) bringup, see [2]


Best regards,
Martin


[0] https://patchwork.kernel.org/project/linux-amlogic/patch/1568276370-54181-3-git-send-email-jianxin.pan@amlogic.com/
[1] https://patchwork.kernel.org/project/linux-amlogic/patch/1568276370-54181-4-git-send-email-jianxin.pan@amlogic.com/
[2] https://patchwork.kernel.org/project/linux-amlogic/patch/1568276370-54181-5-git-send-email-jianxin.pan@amlogic.com/
Xianwei Zhao Dec. 8, 2021, 6 a.m. UTC | #4 
Hi Neil,



  I will modify those lines and update the patch later.



Thanks!



Best regards,



xianwei.zhao



On 2021/12/6 下午6:57, Neil Armstrong wrote:
> Hi,
> 
> On 06/12/2021 11:02, xianwei.zhao wrote:
>> Add basic support for the Amlogic S4 based Amlogic AQ222 board:
>> which describe components as follows: CPU, GIC, IRQ, Timer, UART.
>> It's capable of booting up into the serial console.
>>
>> Signed-off-by: xianwei.zhao <xianwei.zhao@amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>>   .../dts/amlogic/meson-s4-s805x2-aq222.dts     | 30 ++++++
>>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi     | 98 +++++++++++++++++++
>>   3 files changed, 129 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index 5148cd9e5146..faea74a45994 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -57,3 +57,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> new file mode 100644
>> index 000000000000..6b6ecb40be4a
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
>> @@ -0,0 +1,30 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "meson-s4.dtsi"
>> +
>> +/ {
>> +	model = "Amlogic";
> 
> Please change to something like "Amlogic Meson S4 AQ222 Development Board"
> 
>> +	compatible = "amlogic, aq222";
> 
> Drop the space after amlogic, and add "amlogic,aq222" to the Documentation/devicetree/bindings/arm/amlogic.yaml bindings.
> 
> You will probably need to add a new "amlogic,s4" family compatibla aswell.
> 
>> +	interrupt-parent = <&gic>;
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	aliases {
>> +		serial0 = &uart_B;
>> +	};
>> +
>> +	memory@00000000 {
>> +		device_type = "memory";
>> +		linux,usable-memory = <0x0 0x0 0x0 0x40000000>;
> 
> Drop linux,usable-memory in favor or reg
> 
>> +	};
>> +
>> +};
>> +
>> +&uart_B {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> new file mode 100644
>> index 000000000000..b66f62701063
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
>> @@ -0,0 +1,98 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> 
> Add blank line hiere
> 
>> +/ {
>> +	cpus:cpus {
>> +		#address-cells = <2>;
>> +		#size-cells = <0>;
>> +
>> +		CPU0:cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35","arm,armv8";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		CPU1:cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35","arm,armv8";
>> +			reg = <0x0 0x1>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		CPU2:cpu@2 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35","arm,armv8";
>> +			reg = <0x0 0x2>;
>> +			enable-method = "psci";
>> +		};
>> +
>> +		CPU3:cpu@3 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35","arm,armv8";
>> +			reg = <0x0 0x3>;
>> +			enable-method = "psci";
>> +		};
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupts = <GIC_PPI 13 0xff08>,
>> +			     <GIC_PPI 14 0xff08>,
>> +			     <GIC_PPI 11 0xff08>,
>> +			     <GIC_PPI 10 0xff08>;
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +	};
>> +
>> +	xtal: xtal-clk {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <24000000>;
>> +		clock-output-names = "xtal";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		gic: interrupt-controller@fff01000 {
>> +			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
>> +			#interrupt-cells = <3>;
>> +			#address-cells = <0>;
>> +			interrupt-controller;
>> +			reg = <0x0 0xfff01000 0 0x1000>,
>> +			      <0x0 0xfff02000 0 0x0100>;
>> +			interrupts = <GIC_PPI 9 0xf04>;
>> +		};
>> +
>> +		apb4: apb4@fe000000 {
>> +			compatible = "simple-bus";
>> +			reg = <0x0 0xfe000000 0x0 0x480000>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>> +
>> +			uart_B: serial@7a000 {
>> +				compatible = "amlogic,meson-gx-uart",
>> +					     "amlogic,meson-ao-uart";
> 
> use the proper compatibles for s4
> 
> 
>> +				reg = <0x0 0x7a000 0x0 0x18>;
>> +				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
>> +				status = "disabled";
>> +				clocks = <&xtal>, <&xtal>, <&xtal>;
>> +				clock-names = "xtal", "pclk", "baud";
>> +				xtal_tick_en = <1>;
> 
> Drop this property
> 
>> +				fifo-size = <64>;
> 
> No need to specify if 64
> 
>> +			};
>> +		};
>> +	};
>> +};
>>
>> base-commit: c5468e3c930d4d2937d3a842a85df0f74e95e152
>>
> 
> Thanks,
> Neil
> 
> .
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5148cd9e5146..faea74a45994 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -57,3 +57,4 @@  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
new file mode 100644
index 000000000000..6b6ecb40be4a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -0,0 +1,30 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-s4.dtsi"
+
+/ {
+	model = "Amlogic";
+	compatible = "amlogic, aq222";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_B;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		linux,usable-memory = <0x0 0x0 0x0 0x40000000>;
+	};
+
+};
+
+&uart_B {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
new file mode 100644
index 000000000000..b66f62701063
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -0,0 +1,98 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	cpus:cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0:cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		CPU1:cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		CPU2:cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		CPU3:cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 0xff08>,
+			     <GIC_PPI 14 0xff08>,
+			     <GIC_PPI 11 0xff08>,
+			     <GIC_PPI 10 0xff08>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		apb4: apb4@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_B: serial@7a000 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				xtal_tick_en = <1>;
+				fifo-size = <64>;
+			};
+		};
+	};
+};