| Message ID | 20211208150726.10695-1-cniedermaier@dh-electronics.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: imx6qdl-dhcom: Identify the PHY by ethernet-phy-id0007.c0f0 | expand |
On Wed, Dec 8, 2021 at 12:09 PM Christoph Niedermaier <cniedermaier@dh-electronics.com> wrote: > > Identify the PHY by its compatible ID value. In some cases during > boot, the PHY needs to be reset to be accessible, but this is only > possible if the PHY is recognized. In that case, the automatic > detection of the PHY does not work and a static compatible ID > value is need. > > Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Marek Vasut <marex@denx.de> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: kernel@dh-electronics.com > To: linux-arm-kernel@lists.infradead.org Reviewed-by: Fabio Estevam <festevam@gmail.com>
On Wed, Dec 08, 2021 at 04:07:26PM +0100, Christoph Niedermaier wrote: > Identify the PHY by its compatible ID value. In some cases during > boot, the PHY needs to be reset to be accessible, but this is only > possible if the PHY is recognized. In that case, the automatic > detection of the PHY does not work and a static compatible ID > value is need. > > Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: Marek Vasut <marex@denx.de> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: kernel@dh-electronics.com > To: linux-arm-kernel@lists.infradead.org Applied, thanks!
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi index 5d10c40313cb..cbbdfe0cb1fd 100644 --- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi @@ -132,7 +132,8 @@ #size-cells = <0>; ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; interrupt-parent = <&gpio4>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>;
Identify the PHY by its compatible ID value. In some cases during boot, the PHY needs to be reset to be accessible, but this is only possible if the PHY is recognized. In that case, the automatic detection of the PHY does not work and a static compatible ID value is need. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org --- arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)