| Message ID | 20211226153624.162281-10-marcan@marcan.st (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | brcmfmac: Support Apple T2 and M1 platforms | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
On Sun, Dec 26, 2021 at 4:37 PM Hector Martin <marcan@marcan.st> wrote: > On Apple platforms, firmware selection uses the following elements: > > Property Example Source > ============== ======= ======================== > * Chip name 4378 Device ID > * Chip revision B1 OTP > * Platform shikoku DT (ARM64) or ACPI (x86) > * Module type RASP OTP > * Module vendor m OTP > * Module version 6.11 OTP > * Antenna SKU X3 DT (ARM64) or ??? (x86) > > In macOS, these firmwares are stored using filenames in this format > under /usr/share/firmware/wifi: > > C-4378__s-B1/P-shikoku-X3_M-RASP_V-m__m-6.11.txt > > To prepare firmwares for Linux, we rename these to a scheme following > the existing brcmfmac convention: > > brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<mod_type>-\ > <mod_vendor>-<mod_version>-<antenna_sku>.txt > > The NVRAM uses all the components, while the firmware and CLM blob only > use the chip/revision/platform/antenna_sku: > > brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<antenna_sku>.bin > > e.g. > > brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt > brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.bin > > In addition, since there are over 1000 files in total, many of which are > symlinks or outright duplicates, we deduplicate and prune the firmware > tree to reduce firmware filenames to fewer dimensions. For example, the > shikoku platform (MacBook Air M1 2020) simplifies to just 4 files: > > brcm/brcmfmac4378b1-pcie.apple,shikoku.clm_blob > brcm/brcmfmac4378b1-pcie.apple,shikoku.bin > brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt > brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-u.txt > > This reduces the total file count to around 170, of which 75 are > symlinks and 95 are regular files: 7 firmware blobs, 27 CLM blobs, and > 61 NVRAM config files. We also slightly process NVRAM files to correct > some formatting issues and add a missing default macaddr= property. > > To handle this, the driver must try the following path formats when > looking for firmware files: > > brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt > brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11.txt > brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt > brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP.txt > brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.txt * > brcm/brcmfmac4378b1-pcie.apple,shikoku.txt > > * Not relevant for NVRAM, only for firmware/CLM. > > The chip revision nominally comes from OTP on Apple platforms, but it > can be mapped to the PCI revision number, so we ignore the OTP revision > and continue to use the existing PCI revision mechanism to identify chip > revisions, as the driver already does for other chips. Unfortunately, > the mapping is not consistent between different chip types, so this has > to be determined experimentally. > > Signed-off-by: Hector Martin <marcan@marcan.st> It's a neat hack, and I don't see anyone doing anything smarter so: Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 49cb5254fa6e..d31f5a668cec 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -2094,11 +2094,69 @@ brcmf_pcie_prepare_fw_request(struct brcmf_pciedev_info *devinfo) fwreq->domain_nr = pci_domain_nr(devinfo->pdev->bus) + 1; fwreq->bus_nr = devinfo->pdev->bus->number; - brcmf_dbg(PCIE, "Board: %s\n", devinfo->settings->board_type); - fwreq->board_types = devm_kzalloc(&devinfo->pdev->dev, - sizeof(const char *) * 2, - GFP_KERNEL); - fwreq->board_types[0] = devinfo->settings->board_type; + /* Apple platforms with fancy firmware/NVRAM selection */ + if (devinfo->settings->board_type && + devinfo->settings->antenna_sku && + devinfo->otp.valid) { + char *buf; + int len; + + brcmf_dbg(PCIE, "Apple board: %s\n", + devinfo->settings->board_type); + + /* Example: apple,shikoku-RASP-m-6.11-X3 */ + len = (strlen(devinfo->settings->board_type) + 1 + + strlen(devinfo->otp.module) + 1 + + strlen(devinfo->otp.vendor) + 1 + + strlen(devinfo->otp.version) + 1 + + strlen(devinfo->settings->antenna_sku) + 1); + + fwreq->board_types = devm_kzalloc(&devinfo->pdev->dev, + sizeof(const char *) * 7, + GFP_KERNEL); + + /* apple,shikoku */ + fwreq->board_types[5] = devinfo->settings->board_type; + + buf = devm_kzalloc(&devinfo->pdev->dev, len, GFP_KERNEL); + + strscpy(buf, devinfo->settings->board_type, len); + strlcat(buf, "-", len); + strlcat(buf, devinfo->settings->antenna_sku, len); + /* apple,shikoku-X3 */ + fwreq->board_types[4] = devm_kstrdup(&devinfo->pdev->dev, buf, + GFP_KERNEL); + + strscpy(buf, devinfo->settings->board_type, len); + strlcat(buf, "-", len); + strlcat(buf, devinfo->otp.module, len); + /* apple,shikoku-RASP */ + fwreq->board_types[3] = devm_kstrdup(&devinfo->pdev->dev, buf, + GFP_KERNEL); + + strlcat(buf, "-", len); + strlcat(buf, devinfo->otp.vendor, len); + /* apple,shikoku-RASP-m */ + fwreq->board_types[2] = devm_kstrdup(&devinfo->pdev->dev, buf, + GFP_KERNEL); + + strlcat(buf, "-", len); + strlcat(buf, devinfo->otp.version, len); + /* apple,shikoku-RASP-m-6.11 */ + fwreq->board_types[1] = devm_kstrdup(&devinfo->pdev->dev, buf, + GFP_KERNEL); + + strlcat(buf, "-", len); + strlcat(buf, devinfo->settings->antenna_sku, len); + /* apple,shikoku-RASP-m-6.11-X3 */ + fwreq->board_types[0] = buf; + } else { + brcmf_dbg(PCIE, "Board: %s\n", devinfo->settings->board_type); + fwreq->board_types = devm_kzalloc(&devinfo->pdev->dev, + sizeof(const char *) * 2, + GFP_KERNEL); + fwreq->board_types[0] = devinfo->settings->board_type; + } return fwreq; }
On Apple platforms, firmware selection uses the following elements: Property Example Source ============== ======= ======================== * Chip name 4378 Device ID * Chip revision B1 OTP * Platform shikoku DT (ARM64) or ACPI (x86) * Module type RASP OTP * Module vendor m OTP * Module version 6.11 OTP * Antenna SKU X3 DT (ARM64) or ??? (x86) In macOS, these firmwares are stored using filenames in this format under /usr/share/firmware/wifi: C-4378__s-B1/P-shikoku-X3_M-RASP_V-m__m-6.11.txt To prepare firmwares for Linux, we rename these to a scheme following the existing brcmfmac convention: brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<mod_type>-\ <mod_vendor>-<mod_version>-<antenna_sku>.txt The NVRAM uses all the components, while the firmware and CLM blob only use the chip/revision/platform/antenna_sku: brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<antenna_sku>.bin e.g. brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.bin In addition, since there are over 1000 files in total, many of which are symlinks or outright duplicates, we deduplicate and prune the firmware tree to reduce firmware filenames to fewer dimensions. For example, the shikoku platform (MacBook Air M1 2020) simplifies to just 4 files: brcm/brcmfmac4378b1-pcie.apple,shikoku.clm_blob brcm/brcmfmac4378b1-pcie.apple,shikoku.bin brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-u.txt This reduces the total file count to around 170, of which 75 are symlinks and 95 are regular files: 7 firmware blobs, 27 CLM blobs, and 61 NVRAM config files. We also slightly process NVRAM files to correct some formatting issues and add a missing default macaddr= property. To handle this, the driver must try the following path formats when looking for firmware files: brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP.txt brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.txt * brcm/brcmfmac4378b1-pcie.apple,shikoku.txt * Not relevant for NVRAM, only for firmware/CLM. The chip revision nominally comes from OTP on Apple platforms, but it can be mapped to the PCI revision number, so we ignore the OTP revision and continue to use the existing PCI revision mechanism to identify chip revisions, as the driver already does for other chips. Unfortunately, the mapping is not consistent between different chip types, so this has to be determined experimentally. Signed-off-by: Hector Martin <marcan@marcan.st> --- .../broadcom/brcm80211/brcmfmac/pcie.c | 68 +++++++++++++++++-- 1 file changed, 63 insertions(+), 5 deletions(-)