| Message ID | 20211231033725.21109-3-ilkka@os.amperecomputing.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ACPI: Arm Generic Diagnostic Dump and Reset device | expand |
On Fri, Dec 31, 2021 at 4:37 AM Ilkka Koskinen <ilkka@os.amperecomputing.com> wrote: > > ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices > Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to > issue diagnostic dump and reset via an SDEI event or an interrupt. > This patch implements SDEI path. > > [0] https://developer.arm.com/documentation/den0093/latest/ > > Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> This requires an ACK from the arm64 side if you want me to take it. However, I can apply patch 1 from this series if that helps. > --- > drivers/acpi/arm64/Kconfig | 8 +++ > drivers/acpi/arm64/Makefile | 1 + > drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 134 insertions(+) > create mode 100644 drivers/acpi/arm64/agdi.c > > diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig > index 6dba187f4f2e..24869ba5b365 100644 > --- a/drivers/acpi/arm64/Kconfig > +++ b/drivers/acpi/arm64/Kconfig > @@ -8,3 +8,11 @@ config ACPI_IORT > > config ACPI_GTDT > bool > + > +config ACPI_AGDI > + bool "Arm Generic Diagnostic Dump and Reset Device Interface" > + depends on ARM_SDE_INTERFACE > + help > + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is > + a standard that enables issuing a non-maskable diagnostic dump and > + reset command. > diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile > index 66acbe77f46e..7b9e4045659d 100644 > --- a/drivers/acpi/arm64/Makefile > +++ b/drivers/acpi/arm64/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0-only > +obj-$(CONFIG_ACPI_AGDI) += agdi.o > obj-$(CONFIG_ACPI_IORT) += iort.o > obj-$(CONFIG_ACPI_GTDT) += gtdt.o > obj-y += dma.o > diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c > new file mode 100644 > index 000000000000..6525ccbae5c1 > --- /dev/null > +++ b/drivers/acpi/arm64/agdi.c > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * This file implements handling of > + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) > + * > + * Copyright (c) 2021, Ampere Computing LLC > + */ > + > +#define pr_fmt(fmt) "ACPI: AGDI: " fmt > + > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/acpi.h> > +#include <linux/arm_sdei.h> > +#include <linux/io.h> > + > +struct agdi_data { > + int sdei_event; > +}; > + > +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) > +{ > + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); > + return 0; > +} > + > +static int agdi_sdei_probe(struct platform_device *pdev, > + struct agdi_data *adata) > +{ > + int err; > + > + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); > + if (err) { > + dev_err(&pdev->dev, "Failed to register for SDEI event %d", > + adata->sdei_event); > + return err; > + } > + > + err = sdei_event_enable(adata->sdei_event); > + if (err) { > + sdei_event_unregister(adata->sdei_event); > + dev_err(&pdev->dev, "Failed to enable event %d\n", > + adata->sdei_event); > + return err; > + } > + > + return 0; > +} > + > +static int agdi_probe(struct platform_device *pdev) > +{ > + struct agdi_data *adata; > + > + adata = dev_get_platdata(&pdev->dev); > + if (!adata) > + return -EINVAL; > + > + return agdi_sdei_probe(pdev, adata); > +} > + > +static int agdi_remove(struct platform_device *pdev) > +{ > + struct agdi_data *adata = platform_get_drvdata(pdev); > + > + sdei_event_disable(adata->sdei_event); > + sdei_event_unregister(adata->sdei_event); > + > + return 0; > +} > + > +static struct platform_driver agdi_driver = { > + .driver = { > + .name = "agdi", > + }, > + .probe = agdi_probe, > + .remove = agdi_remove, > +}; > + > +static int __init agdi_init(void) > +{ > + int ret; > + acpi_status status; > + struct acpi_table_agdi *agdi_table; > + struct agdi_data pdata; > + struct platform_device *pdev; > + > + if (acpi_disabled) > + return 0; > + > + status = acpi_get_table(ACPI_SIG_AGDI, 0, > + (struct acpi_table_header **) &agdi_table); > + if (ACPI_FAILURE(status)) > + return -ENODEV; > + > + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { > + pr_warn("Interrupt signaling is not supported"); > + ret = -ENODEV; > + goto err_put_table; > + } > + > + pdata.sdei_event = agdi_table->sdei_event; > + > + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); > + if (IS_ERR(pdev)) { > + ret = PTR_ERR(pdev); > + goto err_put_table; > + } > + > + ret = platform_driver_register(&agdi_driver); > + if (ret) > + goto err_device_unregister; > + > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return 0; > + > +err_device_unregister: > + platform_device_unregister(pdev); > +err_put_table: > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return ret; > +} > +device_initcall(agdi_init); > -- > 2.17.1 >
Hi Ilkka, On 2021/12/31 11:37, Ilkka Koskinen wrote: > ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices > Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to > issue diagnostic dump and reset via an SDEI event or an interrupt. > This patch implements SDEI path. > > [0] https://developer.arm.com/documentation/den0093/latest/ > > Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> > --- > drivers/acpi/arm64/Kconfig | 8 +++ > drivers/acpi/arm64/Makefile | 1 + > drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 134 insertions(+) > create mode 100644 drivers/acpi/arm64/agdi.c > > diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig > index 6dba187f4f2e..24869ba5b365 100644 > --- a/drivers/acpi/arm64/Kconfig > +++ b/drivers/acpi/arm64/Kconfig > @@ -8,3 +8,11 @@ config ACPI_IORT > > config ACPI_GTDT > bool > + > +config ACPI_AGDI > + bool "Arm Generic Diagnostic Dump and Reset Device Interface" > + depends on ARM_SDE_INTERFACE > + help > + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is > + a standard that enables issuing a non-maskable diagnostic dump and > + reset command. > diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile > index 66acbe77f46e..7b9e4045659d 100644 > --- a/drivers/acpi/arm64/Makefile > +++ b/drivers/acpi/arm64/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0-only > +obj-$(CONFIG_ACPI_AGDI) += agdi.o > obj-$(CONFIG_ACPI_IORT) += iort.o > obj-$(CONFIG_ACPI_GTDT) += gtdt.o > obj-y += dma.o > diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c > new file mode 100644 > index 000000000000..6525ccbae5c1 > --- /dev/null > +++ b/drivers/acpi/arm64/agdi.c > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * This file implements handling of > + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) > + * > + * Copyright (c) 2021, Ampere Computing LLC > + */ > + > +#define pr_fmt(fmt) "ACPI: AGDI: " fmt > + > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/acpi.h> > +#include <linux/arm_sdei.h> > +#include <linux/io.h> Please keep the head files in alphabetical order. > + > +struct agdi_data { > + int sdei_event; > +}; > + > +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) > +{ > + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); > + return 0; > +} > + > +static int agdi_sdei_probe(struct platform_device *pdev, > + struct agdi_data *adata) > +{ > + int err; > + > + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); > + if (err) { > + dev_err(&pdev->dev, "Failed to register for SDEI event %d", > + adata->sdei_event); > + return err; > + } > + > + err = sdei_event_enable(adata->sdei_event); > + if (err) { > + sdei_event_unregister(adata->sdei_event); > + dev_err(&pdev->dev, "Failed to enable event %d\n", > + adata->sdei_event); > + return err; > + } > + > + return 0; > +} > + > +static int agdi_probe(struct platform_device *pdev) > +{ > + struct agdi_data *adata; > + > + adata = dev_get_platdata(&pdev->dev); > + if (!adata) > + return -EINVAL; > + > + return agdi_sdei_probe(pdev, adata); > +} > + > +static int agdi_remove(struct platform_device *pdev) > +{ > + struct agdi_data *adata = platform_get_drvdata(pdev); > + > + sdei_event_disable(adata->sdei_event); > + sdei_event_unregister(adata->sdei_event); > + > + return 0; > +} > + > +static struct platform_driver agdi_driver = { > + .driver = { > + .name = "agdi", > + }, > + .probe = agdi_probe, > + .remove = agdi_remove, > +}; > + > +static int __init agdi_init(void) > +{ > + int ret; > + acpi_status status; > + struct acpi_table_agdi *agdi_table; > + struct agdi_data pdata; > + struct platform_device *pdev; > + > + if (acpi_disabled) > + return 0; > + > + status = acpi_get_table(ACPI_SIG_AGDI, 0, > + (struct acpi_table_header **) &agdi_table); > + if (ACPI_FAILURE(status)) > + return -ENODEV; > + > + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { > + pr_warn("Interrupt signaling is not supported"); > + ret = -ENODEV; > + goto err_put_table; > + } > + > + pdata.sdei_event = agdi_table->sdei_event; > + > + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); > + if (IS_ERR(pdev)) { > + ret = PTR_ERR(pdev); > + goto err_put_table; > + } > + > + ret = platform_driver_register(&agdi_driver); > + if (ret) > + goto err_device_unregister; > + > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return 0; > + > +err_device_unregister: > + platform_device_unregister(pdev); > +err_put_table: > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return ret; > +} > +device_initcall(agdi_init); The rest are looking good to me. Thanks Hanjun
Hi Rafael, On Tue, 4 Jan 2022, Rafael J. Wysocki wrote: > On Fri, Dec 31, 2021 at 4:37 AM Ilkka Koskinen > <ilkka@os.amperecomputing.com> wrote: >> >> ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices >> Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to >> issue diagnostic dump and reset via an SDEI event or an interrupt. >> This patch implements SDEI path. >> >> [0] https://developer.arm.com/documentation/den0093/latest/ >> >> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> > > This requires an ACK from the arm64 side if you want me to take it. That's my understanding too. > However, I can apply patch 1 from this series if that helps. I'm not sure, if it makes sense to pick the first patch now since there aren't other users for it. I'd probably keep them together although I don't have strong feelings about it. Cheers, Ilkka > >> --- >> drivers/acpi/arm64/Kconfig | 8 +++ >> drivers/acpi/arm64/Makefile | 1 + >> drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ >> 3 files changed, 134 insertions(+) >> create mode 100644 drivers/acpi/arm64/agdi.c >> >> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig >> index 6dba187f4f2e..24869ba5b365 100644 >> --- a/drivers/acpi/arm64/Kconfig >> +++ b/drivers/acpi/arm64/Kconfig >> @@ -8,3 +8,11 @@ config ACPI_IORT >> >> config ACPI_GTDT >> bool >> + >> +config ACPI_AGDI >> + bool "Arm Generic Diagnostic Dump and Reset Device Interface" >> + depends on ARM_SDE_INTERFACE >> + help >> + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is >> + a standard that enables issuing a non-maskable diagnostic dump and >> + reset command. >> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile >> index 66acbe77f46e..7b9e4045659d 100644 >> --- a/drivers/acpi/arm64/Makefile >> +++ b/drivers/acpi/arm64/Makefile >> @@ -1,4 +1,5 @@ >> # SPDX-License-Identifier: GPL-2.0-only >> +obj-$(CONFIG_ACPI_AGDI) += agdi.o >> obj-$(CONFIG_ACPI_IORT) += iort.o >> obj-$(CONFIG_ACPI_GTDT) += gtdt.o >> obj-y += dma.o >> diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c >> new file mode 100644 >> index 000000000000..6525ccbae5c1 >> --- /dev/null >> +++ b/drivers/acpi/arm64/agdi.c >> @@ -0,0 +1,125 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * This file implements handling of >> + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) >> + * >> + * Copyright (c) 2021, Ampere Computing LLC >> + */ >> + >> +#define pr_fmt(fmt) "ACPI: AGDI: " fmt >> + >> +#include <linux/kernel.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/module.h> >> +#include <linux/kernel.h> >> +#include <linux/acpi.h> >> +#include <linux/arm_sdei.h> >> +#include <linux/io.h> >> + >> +struct agdi_data { >> + int sdei_event; >> +}; >> + >> +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) >> +{ >> + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); >> + return 0; >> +} >> + >> +static int agdi_sdei_probe(struct platform_device *pdev, >> + struct agdi_data *adata) >> +{ >> + int err; >> + >> + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); >> + if (err) { >> + dev_err(&pdev->dev, "Failed to register for SDEI event %d", >> + adata->sdei_event); >> + return err; >> + } >> + >> + err = sdei_event_enable(adata->sdei_event); >> + if (err) { >> + sdei_event_unregister(adata->sdei_event); >> + dev_err(&pdev->dev, "Failed to enable event %d\n", >> + adata->sdei_event); >> + return err; >> + } >> + >> + return 0; >> +} >> + >> +static int agdi_probe(struct platform_device *pdev) >> +{ >> + struct agdi_data *adata; >> + >> + adata = dev_get_platdata(&pdev->dev); >> + if (!adata) >> + return -EINVAL; >> + >> + return agdi_sdei_probe(pdev, adata); >> +} >> + >> +static int agdi_remove(struct platform_device *pdev) >> +{ >> + struct agdi_data *adata = platform_get_drvdata(pdev); >> + >> + sdei_event_disable(adata->sdei_event); >> + sdei_event_unregister(adata->sdei_event); >> + >> + return 0; >> +} >> + >> +static struct platform_driver agdi_driver = { >> + .driver = { >> + .name = "agdi", >> + }, >> + .probe = agdi_probe, >> + .remove = agdi_remove, >> +}; >> + >> +static int __init agdi_init(void) >> +{ >> + int ret; >> + acpi_status status; >> + struct acpi_table_agdi *agdi_table; >> + struct agdi_data pdata; >> + struct platform_device *pdev; >> + >> + if (acpi_disabled) >> + return 0; >> + >> + status = acpi_get_table(ACPI_SIG_AGDI, 0, >> + (struct acpi_table_header **) &agdi_table); >> + if (ACPI_FAILURE(status)) >> + return -ENODEV; >> + >> + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { >> + pr_warn("Interrupt signaling is not supported"); >> + ret = -ENODEV; >> + goto err_put_table; >> + } >> + >> + pdata.sdei_event = agdi_table->sdei_event; >> + >> + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); >> + if (IS_ERR(pdev)) { >> + ret = PTR_ERR(pdev); >> + goto err_put_table; >> + } >> + >> + ret = platform_driver_register(&agdi_driver); >> + if (ret) >> + goto err_device_unregister; >> + >> + acpi_put_table((struct acpi_table_header *)agdi_table); >> + return 0; >> + >> +err_device_unregister: >> + platform_device_unregister(pdev); >> +err_put_table: >> + acpi_put_table((struct acpi_table_header *)agdi_table); >> + return ret; >> +} >> +device_initcall(agdi_init); >> -- >> 2.17.1 >> >
Hi Hanjun, On Wed, 5 Jan 2022, Hanjun Guo wrote: > Hi Ilkka, > > On 2021/12/31 11:37, Ilkka Koskinen wrote: >> ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices >> Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to >> issue diagnostic dump and reset via an SDEI event or an interrupt. >> This patch implements SDEI path. >> >> [0] https://developer.arm.com/documentation/den0093/latest/ >> >> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> >> --- >> drivers/acpi/arm64/Kconfig | 8 +++ >> drivers/acpi/arm64/Makefile | 1 + >> drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ >> 3 files changed, 134 insertions(+) >> create mode 100644 drivers/acpi/arm64/agdi.c >> >> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig >> index 6dba187f4f2e..24869ba5b365 100644 >> --- a/drivers/acpi/arm64/Kconfig >> +++ b/drivers/acpi/arm64/Kconfig >> @@ -8,3 +8,11 @@ config ACPI_IORT >> config ACPI_GTDT >> bool >> + >> +config ACPI_AGDI >> + bool "Arm Generic Diagnostic Dump and Reset Device Interface" >> + depends on ARM_SDE_INTERFACE >> + help >> + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is >> + a standard that enables issuing a non-maskable diagnostic dump and >> + reset command. >> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile >> index 66acbe77f46e..7b9e4045659d 100644 >> --- a/drivers/acpi/arm64/Makefile >> +++ b/drivers/acpi/arm64/Makefile >> @@ -1,4 +1,5 @@ >> # SPDX-License-Identifier: GPL-2.0-only >> +obj-$(CONFIG_ACPI_AGDI) += agdi.o >> obj-$(CONFIG_ACPI_IORT) += iort.o >> obj-$(CONFIG_ACPI_GTDT) += gtdt.o >> obj-y += dma.o >> diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c >> new file mode 100644 >> index 000000000000..6525ccbae5c1 >> --- /dev/null >> +++ b/drivers/acpi/arm64/agdi.c >> @@ -0,0 +1,125 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * This file implements handling of >> + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) >> + * >> + * Copyright (c) 2021, Ampere Computing LLC >> + */ >> + >> +#define pr_fmt(fmt) "ACPI: AGDI: " fmt >> + >> +#include <linux/kernel.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/module.h> >> +#include <linux/kernel.h> >> +#include <linux/acpi.h> >> +#include <linux/arm_sdei.h> >> +#include <linux/io.h> > > Please keep the head files in alphabetical order. I'll fix the include lines > >> + >> +struct agdi_data { >> + int sdei_event; >> +}; >> + >> +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void >> *arg) >> +{ >> + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event >> issued"); >> + return 0; >> +} >> + >> +static int agdi_sdei_probe(struct platform_device *pdev, >> + struct agdi_data *adata) >> +{ >> + int err; >> + >> + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, >> pdev); >> + if (err) { >> + dev_err(&pdev->dev, "Failed to register for SDEI event %d", >> + adata->sdei_event); >> + return err; >> + } >> + >> + err = sdei_event_enable(adata->sdei_event); >> + if (err) { >> + sdei_event_unregister(adata->sdei_event); >> + dev_err(&pdev->dev, "Failed to enable event %d\n", >> + adata->sdei_event); >> + return err; >> + } >> + >> + return 0; >> +} >> + >> +static int agdi_probe(struct platform_device *pdev) >> +{ >> + struct agdi_data *adata; >> + >> + adata = dev_get_platdata(&pdev->dev); >> + if (!adata) >> + return -EINVAL; >> + >> + return agdi_sdei_probe(pdev, adata); >> +} >> + >> +static int agdi_remove(struct platform_device *pdev) >> +{ >> + struct agdi_data *adata = platform_get_drvdata(pdev); >> + >> + sdei_event_disable(adata->sdei_event); >> + sdei_event_unregister(adata->sdei_event); >> + >> + return 0; >> +} >> + >> +static struct platform_driver agdi_driver = { >> + .driver = { >> + .name = "agdi", >> + }, >> + .probe = agdi_probe, >> + .remove = agdi_remove, >> +}; >> + >> +static int __init agdi_init(void) >> +{ >> + int ret; >> + acpi_status status; >> + struct acpi_table_agdi *agdi_table; >> + struct agdi_data pdata; >> + struct platform_device *pdev; >> + >> + if (acpi_disabled) >> + return 0; >> + >> + status = acpi_get_table(ACPI_SIG_AGDI, 0, >> + (struct acpi_table_header **) &agdi_table); >> + if (ACPI_FAILURE(status)) >> + return -ENODEV; >> + >> + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { >> + pr_warn("Interrupt signaling is not supported"); >> + ret = -ENODEV; >> + goto err_put_table; >> + } >> + >> + pdata.sdei_event = agdi_table->sdei_event; >> + >> + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, >> sizeof(pdata)); >> + if (IS_ERR(pdev)) { >> + ret = PTR_ERR(pdev); >> + goto err_put_table; >> + } >> + >> + ret = platform_driver_register(&agdi_driver); >> + if (ret) >> + goto err_device_unregister; >> + >> + acpi_put_table((struct acpi_table_header *)agdi_table); >> + return 0; >> + >> +err_device_unregister: >> + platform_device_unregister(pdev); >> +err_put_table: >> + acpi_put_table((struct acpi_table_header *)agdi_table); >> + return ret; >> +} >> +device_initcall(agdi_init); > > The rest are looking good to me. I'm glad to hear that > Thanks > Hanjun > Cheers, Ilkka
[+James, for SDEI bits] On Thu, Dec 30, 2021 at 07:37:25PM -0800, Ilkka Koskinen wrote: > ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices > Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to > issue diagnostic dump and reset via an SDEI event or an interrupt. > This patch implements SDEI path. > > [0] https://developer.arm.com/documentation/den0093/latest/ > > Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> > --- > drivers/acpi/arm64/Kconfig | 8 +++ > drivers/acpi/arm64/Makefile | 1 + > drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 134 insertions(+) > create mode 100644 drivers/acpi/arm64/agdi.c > > diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig > index 6dba187f4f2e..24869ba5b365 100644 > --- a/drivers/acpi/arm64/Kconfig > +++ b/drivers/acpi/arm64/Kconfig > @@ -8,3 +8,11 @@ config ACPI_IORT > > config ACPI_GTDT > bool > + > +config ACPI_AGDI > + bool "Arm Generic Diagnostic Dump and Reset Device Interface" > + depends on ARM_SDE_INTERFACE > + help > + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is > + a standard that enables issuing a non-maskable diagnostic dump and > + reset command. > diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile > index 66acbe77f46e..7b9e4045659d 100644 > --- a/drivers/acpi/arm64/Makefile > +++ b/drivers/acpi/arm64/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0-only > +obj-$(CONFIG_ACPI_AGDI) += agdi.o > obj-$(CONFIG_ACPI_IORT) += iort.o > obj-$(CONFIG_ACPI_GTDT) += gtdt.o > obj-y += dma.o > diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c > new file mode 100644 > index 000000000000..6525ccbae5c1 > --- /dev/null > +++ b/drivers/acpi/arm64/agdi.c > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * This file implements handling of > + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) > + * > + * Copyright (c) 2021, Ampere Computing LLC > + */ > + > +#define pr_fmt(fmt) "ACPI: AGDI: " fmt > + > +#include <linux/kernel.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/acpi.h> > +#include <linux/arm_sdei.h> > +#include <linux/io.h> Nit: alphabetical order. > + > +struct agdi_data { > + int sdei_event; > +}; > + > +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) > +{ > + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); > + return 0; > +} > + > +static int agdi_sdei_probe(struct platform_device *pdev, > + struct agdi_data *adata) > +{ > + int err; > + > + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); > + if (err) { > + dev_err(&pdev->dev, "Failed to register for SDEI event %d", > + adata->sdei_event); > + return err; > + } > + > + err = sdei_event_enable(adata->sdei_event); > + if (err) { > + sdei_event_unregister(adata->sdei_event); > + dev_err(&pdev->dev, "Failed to enable event %d\n", > + adata->sdei_event); > + return err; > + } > + > + return 0; > +} > + > +static int agdi_probe(struct platform_device *pdev) > +{ > + struct agdi_data *adata; > + > + adata = dev_get_platdata(&pdev->dev); > + if (!adata) > + return -EINVAL; > + > + return agdi_sdei_probe(pdev, adata); > +} > + > +static int agdi_remove(struct platform_device *pdev) > +{ > + struct agdi_data *adata = platform_get_drvdata(pdev); > + > + sdei_event_disable(adata->sdei_event); > + sdei_event_unregister(adata->sdei_event); > + > + return 0; > +} > + > +static struct platform_driver agdi_driver = { > + .driver = { > + .name = "agdi", > + }, > + .probe = agdi_probe, > + .remove = agdi_remove, > +}; May I ask why we need a platform device (and driver) to register an SDEI event ? > +static int __init agdi_init(void) > +{ > + int ret; > + acpi_status status; > + struct acpi_table_agdi *agdi_table; > + struct agdi_data pdata; > + struct platform_device *pdev; > + > + if (acpi_disabled) > + return 0; Why don't we call agdi_init() from acpi_init() as we do for IORT/VIOT ? I don't think it is necessary to add a device_initcall(), with related ordering dependencies. > + > + status = acpi_get_table(ACPI_SIG_AGDI, 0, > + (struct acpi_table_header **) &agdi_table); > + if (ACPI_FAILURE(status)) > + return -ENODEV; > + > + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { Is this because specs need updating ? > + pr_warn("Interrupt signaling is not supported"); > + ret = -ENODEV; > + goto err_put_table; > + } > + > + pdata.sdei_event = agdi_table->sdei_event; > + > + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); > + if (IS_ERR(pdev)) { > + ret = PTR_ERR(pdev); > + goto err_put_table; > + } > + > + ret = platform_driver_register(&agdi_driver); > + if (ret) > + goto err_device_unregister; > + > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return 0; > + > +err_device_unregister: > + platform_device_unregister(pdev); > +err_put_table: > + acpi_put_table((struct acpi_table_header *)agdi_table); > + return ret; > +} > +device_initcall(agdi_init); See above. Thanks, Lorenzo
Hi Lorenzo, On Wed, 5 Jan 2022, Lorenzo Pieralisi wrote: > [+James, for SDEI bits] > > On Thu, Dec 30, 2021 at 07:37:25PM -0800, Ilkka Koskinen wrote: >> ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices >> Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to >> issue diagnostic dump and reset via an SDEI event or an interrupt. >> This patch implements SDEI path. >> >> [0] https://developer.arm.com/documentation/den0093/latest/ >> >> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> >> --- >> drivers/acpi/arm64/Kconfig | 8 +++ >> drivers/acpi/arm64/Makefile | 1 + >> drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ >> 3 files changed, 134 insertions(+) >> create mode 100644 drivers/acpi/arm64/agdi.c >> >> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig >> index 6dba187f4f2e..24869ba5b365 100644 >> --- a/drivers/acpi/arm64/Kconfig >> +++ b/drivers/acpi/arm64/Kconfig >> @@ -8,3 +8,11 @@ config ACPI_IORT >> >> config ACPI_GTDT >> bool >> + >> +config ACPI_AGDI >> + bool "Arm Generic Diagnostic Dump and Reset Device Interface" >> + depends on ARM_SDE_INTERFACE >> + help >> + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is >> + a standard that enables issuing a non-maskable diagnostic dump and >> + reset command. >> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile >> index 66acbe77f46e..7b9e4045659d 100644 >> --- a/drivers/acpi/arm64/Makefile >> +++ b/drivers/acpi/arm64/Makefile >> @@ -1,4 +1,5 @@ >> # SPDX-License-Identifier: GPL-2.0-only >> +obj-$(CONFIG_ACPI_AGDI) += agdi.o >> obj-$(CONFIG_ACPI_IORT) += iort.o >> obj-$(CONFIG_ACPI_GTDT) += gtdt.o >> obj-y += dma.o >> diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c >> new file mode 100644 >> index 000000000000..6525ccbae5c1 >> --- /dev/null >> +++ b/drivers/acpi/arm64/agdi.c >> @@ -0,0 +1,125 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * This file implements handling of >> + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) >> + * >> + * Copyright (c) 2021, Ampere Computing LLC >> + */ >> + >> +#define pr_fmt(fmt) "ACPI: AGDI: " fmt >> + >> +#include <linux/kernel.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/module.h> >> +#include <linux/kernel.h> >> +#include <linux/acpi.h> >> +#include <linux/arm_sdei.h> >> +#include <linux/io.h> > > Nit: alphabetical order. I clean them > >> + >> +struct agdi_data { >> + int sdei_event; >> +}; >> + >> +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) >> +{ >> + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); >> + return 0; >> +} >> + >> +static int agdi_sdei_probe(struct platform_device *pdev, >> + struct agdi_data *adata) >> +{ >> + int err; >> + >> + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); >> + if (err) { >> + dev_err(&pdev->dev, "Failed to register for SDEI event %d", >> + adata->sdei_event); >> + return err; >> + } >> + >> + err = sdei_event_enable(adata->sdei_event); >> + if (err) { >> + sdei_event_unregister(adata->sdei_event); >> + dev_err(&pdev->dev, "Failed to enable event %d\n", >> + adata->sdei_event); >> + return err; >> + } >> + >> + return 0; >> +} >> + >> +static int agdi_probe(struct platform_device *pdev) >> +{ >> + struct agdi_data *adata; >> + >> + adata = dev_get_platdata(&pdev->dev); >> + if (!adata) >> + return -EINVAL; >> + >> + return agdi_sdei_probe(pdev, adata); >> +} >> + >> +static int agdi_remove(struct platform_device *pdev) >> +{ >> + struct agdi_data *adata = platform_get_drvdata(pdev); >> + >> + sdei_event_disable(adata->sdei_event); >> + sdei_event_unregister(adata->sdei_event); >> + >> + return 0; >> +} >> + >> +static struct platform_driver agdi_driver = { >> + .driver = { >> + .name = "agdi", >> + }, >> + .probe = agdi_probe, >> + .remove = agdi_remove, >> +}; > > May I ask why we need a platform device (and driver) to register > an SDEI event ? Well, I guess I thought to have a device/driver to handle SDEI events and interrupts since the spec calls it a device. I can certainly remove those, if that's preferred. > >> +static int __init agdi_init(void) >> +{ >> + int ret; >> + acpi_status status; >> + struct acpi_table_agdi *agdi_table; >> + struct agdi_data pdata; >> + struct platform_device *pdev; >> + >> + if (acpi_disabled) >> + return 0; > > Why don't we call agdi_init() from acpi_init() as we do for IORT/VIOT ? > > I don't think it is necessary to add a device_initcall(), with related > ordering dependencies. That's a good point. I change it. > >> + >> + status = acpi_get_table(ACPI_SIG_AGDI, 0, >> + (struct acpi_table_header **) &agdi_table); >> + if (ACPI_FAILURE(status)) >> + return -ENODEV; >> + >> + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { > > Is this because specs need updating ? Yes, that's the reason. AGDI table is missing flags that would define trigger type and polarity. > >> + pr_warn("Interrupt signaling is not supported"); >> + ret = -ENODEV; >> + goto err_put_table; >> + } >> + >> + pdata.sdei_event = agdi_table->sdei_event; >> + >> + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); >> + if (IS_ERR(pdev)) { >> + ret = PTR_ERR(pdev); >> + goto err_put_table; >> + } >> + >> + ret = platform_driver_register(&agdi_driver); >> + if (ret) >> + goto err_device_unregister; >> + >> + acpi_put_table((struct acpi_table_header *)agdi_table); >> + return 0; >> + >> +err_device_unregister: >> + platform_device_unregister(pdev); >> +err_put_table: >> + acpi_put_table((struct acpi_table_header *)agdi_table); >> + return ret; >> +} >> +device_initcall(agdi_init); > > See above. > > Thanks, > Lorenzo > Cheers, Ilkka
Hi Lorenzo, On Wed, 5 Jan 2022, Ilkka Koskinen wrote: > > Hi Lorenzo, > > On Wed, 5 Jan 2022, Lorenzo Pieralisi wrote: >> [+James, for SDEI bits] >> >> On Thu, Dec 30, 2021 at 07:37:25PM -0800, Ilkka Koskinen wrote: >>> ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices >>> Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to >>> issue diagnostic dump and reset via an SDEI event or an interrupt. >>> This patch implements SDEI path. >>> >>> [0] https://developer.arm.com/documentation/den0093/latest/ >>> >>> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> >>> --- >>> drivers/acpi/arm64/Kconfig | 8 +++ >>> drivers/acpi/arm64/Makefile | 1 + >>> drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ >>> 3 files changed, 134 insertions(+) >>> create mode 100644 drivers/acpi/arm64/agdi.c <snip> >>> diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c >>> new file mode 100644 >>> index 000000000000..6525ccbae5c1 >>> --- /dev/null >>> +++ b/drivers/acpi/arm64/agdi.c <snip> >>> >>> +static int __init agdi_init(void) >>> +{ >>> + int ret; >>> + acpi_status status; >>> + struct acpi_table_agdi *agdi_table; >>> + struct agdi_data pdata; >>> + struct platform_device *pdev; >>> + >>> + if (acpi_disabled) >>> + return 0; >> >> Why don't we call agdi_init() from acpi_init() as we do for IORT/VIOT ? >> >> I don't think it is necessary to add a device_initcall(), with related >> ordering dependencies. > > That's a good point. I change it. Actually, I looked at this more carefully. acpi_init() is called in subsys_initcall() while sdei_init() is called in subsys_initcall_sync(). That is, if I call this function in acpi_init(), SDEI driver won't be ready and this driver fails to register the event. Cheers, Ilkka
On Thu, Jan 13, 2022 at 06:17:13PM -0800, Ilkka Koskinen wrote: > > Hi Lorenzo, > > On Wed, 5 Jan 2022, Ilkka Koskinen wrote: > > > > Hi Lorenzo, > > > > On Wed, 5 Jan 2022, Lorenzo Pieralisi wrote: > > > [+James, for SDEI bits] > > > > > > On Thu, Dec 30, 2021 at 07:37:25PM -0800, Ilkka Koskinen wrote: > > > > ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices > > > > Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to > > > > issue diagnostic dump and reset via an SDEI event or an interrupt. > > > > This patch implements SDEI path. > > > > > > > > [0] https://developer.arm.com/documentation/den0093/latest/ > > > > > > > > Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> > > > > --- > > > > drivers/acpi/arm64/Kconfig | 8 +++ > > > > drivers/acpi/arm64/Makefile | 1 + > > > > drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ > > > > 3 files changed, 134 insertions(+) > > > > create mode 100644 drivers/acpi/arm64/agdi.c > > <snip> > > > > > diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c > > > > new file mode 100644 > > > > index 000000000000..6525ccbae5c1 > > > > --- /dev/null > > > > +++ b/drivers/acpi/arm64/agdi.c > > <snip> > > > > > > > > > +static int __init agdi_init(void) > > > > +{ > > > > + int ret; > > > > + acpi_status status; > > > > + struct acpi_table_agdi *agdi_table; > > > > + struct agdi_data pdata; > > > > + struct platform_device *pdev; > > > > + > > > > + if (acpi_disabled) > > > > + return 0; > > > > > > Why don't we call agdi_init() from acpi_init() as we do for IORT/VIOT ? > > > > > > I don't think it is necessary to add a device_initcall(), with related > > > ordering dependencies. > > > > That's a good point. I change it. > > Actually, I looked at this more carefully. acpi_init() is called in > subsys_initcall() while sdei_init() is called in subsys_initcall_sync(). > That is, if I call this function in acpi_init(), SDEI driver won't be ready > and this driver fails to register the event. Maybe this will help: https://lore.kernel.org/linux-arm-kernel/20220120050522.23689-1-xueshuai@linux.alibaba.com/
On Thu, 20 Jan 2022, Lorenzo Pieralisi wrote: > On Thu, Jan 13, 2022 at 06:17:13PM -0800, Ilkka Koskinen wrote: >> >> Hi Lorenzo, >> >> On Wed, 5 Jan 2022, Ilkka Koskinen wrote: >>> >>> Hi Lorenzo, >>> >>> On Wed, 5 Jan 2022, Lorenzo Pieralisi wrote: >>>> [+James, for SDEI bits] >>>> >>>> On Thu, Dec 30, 2021 at 07:37:25PM -0800, Ilkka Koskinen wrote: >>>>> ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices >>>>> Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to >>>>> issue diagnostic dump and reset via an SDEI event or an interrupt. >>>>> This patch implements SDEI path. >>>>> >>>>> [0] https://developer.arm.com/documentation/den0093/latest/ >>>>> >>>>> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> >>>>> --- >>>>> drivers/acpi/arm64/Kconfig | 8 +++ >>>>> drivers/acpi/arm64/Makefile | 1 + >>>>> drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ >>>>> 3 files changed, 134 insertions(+) >>>>> create mode 100644 drivers/acpi/arm64/agdi.c >> >> <snip> >> >>>>> diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c >>>>> new file mode 100644 >>>>> index 000000000000..6525ccbae5c1 >>>>> --- /dev/null >>>>> +++ b/drivers/acpi/arm64/agdi.c >> >> <snip> >> >>>>> >>>>> +static int __init agdi_init(void) >>>>> +{ >>>>> + int ret; >>>>> + acpi_status status; >>>>> + struct acpi_table_agdi *agdi_table; >>>>> + struct agdi_data pdata; >>>>> + struct platform_device *pdev; >>>>> + >>>>> + if (acpi_disabled) >>>>> + return 0; >>>> >>>> Why don't we call agdi_init() from acpi_init() as we do for IORT/VIOT ? >>>> >>>> I don't think it is necessary to add a device_initcall(), with related >>>> ordering dependencies. >>> >>> That's a good point. I change it. >> >> Actually, I looked at this more carefully. acpi_init() is called in >> subsys_initcall() while sdei_init() is called in subsys_initcall_sync(). >> That is, if I call this function in acpi_init(), SDEI driver won't be ready >> and this driver fails to register the event. > > Maybe this will help: > > https://lore.kernel.org/linux-arm-kernel/20220120050522.23689-1-xueshuai@linux.alibaba.com/ Yep, that should work. I'll wait for his patch to get approved and make the needed changes to mine before submitting the v5. Cheers, Ilkka
diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig index 6dba187f4f2e..24869ba5b365 100644 --- a/drivers/acpi/arm64/Kconfig +++ b/drivers/acpi/arm64/Kconfig @@ -8,3 +8,11 @@ config ACPI_IORT config ACPI_GTDT bool + +config ACPI_AGDI + bool "Arm Generic Diagnostic Dump and Reset Device Interface" + depends on ARM_SDE_INTERFACE + help + Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is + a standard that enables issuing a non-maskable diagnostic dump and + reset command. diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile index 66acbe77f46e..7b9e4045659d 100644 --- a/drivers/acpi/arm64/Makefile +++ b/drivers/acpi/arm64/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_ACPI_AGDI) += agdi.o obj-$(CONFIG_ACPI_IORT) += iort.o obj-$(CONFIG_ACPI_GTDT) += gtdt.o obj-y += dma.o diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c new file mode 100644 index 000000000000..6525ccbae5c1 --- /dev/null +++ b/drivers/acpi/arm64/agdi.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file implements handling of + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI) + * + * Copyright (c) 2021, Ampere Computing LLC + */ + +#define pr_fmt(fmt) "ACPI: AGDI: " fmt + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/arm_sdei.h> +#include <linux/io.h> + +struct agdi_data { + int sdei_event; +}; + +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void *arg) +{ + nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event issued"); + return 0; +} + +static int agdi_sdei_probe(struct platform_device *pdev, + struct agdi_data *adata) +{ + int err; + + err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, pdev); + if (err) { + dev_err(&pdev->dev, "Failed to register for SDEI event %d", + adata->sdei_event); + return err; + } + + err = sdei_event_enable(adata->sdei_event); + if (err) { + sdei_event_unregister(adata->sdei_event); + dev_err(&pdev->dev, "Failed to enable event %d\n", + adata->sdei_event); + return err; + } + + return 0; +} + +static int agdi_probe(struct platform_device *pdev) +{ + struct agdi_data *adata; + + adata = dev_get_platdata(&pdev->dev); + if (!adata) + return -EINVAL; + + return agdi_sdei_probe(pdev, adata); +} + +static int agdi_remove(struct platform_device *pdev) +{ + struct agdi_data *adata = platform_get_drvdata(pdev); + + sdei_event_disable(adata->sdei_event); + sdei_event_unregister(adata->sdei_event); + + return 0; +} + +static struct platform_driver agdi_driver = { + .driver = { + .name = "agdi", + }, + .probe = agdi_probe, + .remove = agdi_remove, +}; + +static int __init agdi_init(void) +{ + int ret; + acpi_status status; + struct acpi_table_agdi *agdi_table; + struct agdi_data pdata; + struct platform_device *pdev; + + if (acpi_disabled) + return 0; + + status = acpi_get_table(ACPI_SIG_AGDI, 0, + (struct acpi_table_header **) &agdi_table); + if (ACPI_FAILURE(status)) + return -ENODEV; + + if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) { + pr_warn("Interrupt signaling is not supported"); + ret = -ENODEV; + goto err_put_table; + } + + pdata.sdei_event = agdi_table->sdei_event; + + pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, sizeof(pdata)); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto err_put_table; + } + + ret = platform_driver_register(&agdi_driver); + if (ret) + goto err_device_unregister; + + acpi_put_table((struct acpi_table_header *)agdi_table); + return 0; + +err_device_unregister: + platform_device_unregister(pdev); +err_put_table: + acpi_put_table((struct acpi_table_header *)agdi_table); + return ret; +} +device_initcall(agdi_init);
ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to issue diagnostic dump and reset via an SDEI event or an interrupt. This patch implements SDEI path. [0] https://developer.arm.com/documentation/den0093/latest/ Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> --- drivers/acpi/arm64/Kconfig | 8 +++ drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/agdi.c | 125 ++++++++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 drivers/acpi/arm64/agdi.c