Message ID | 20220105212338.49899-2-danielhb413@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | user creatable pnv-phb3/pnv-phb4 devices | expand |
On 1/5/22 22:23, Daniel Henrique Barboza wrote: > When creating a pnv_phb3_root_port using the command line, the first > root port is created successfully, but the second fails with the > following error: > > qemu-system-ppc64: -device pnv-phb3-root-port,bus=phb3-root.0,id=pcie.3: > Can't add chassis slot, error -16 > > This error comes from the realize() function of its parent type, > rp_realize() from TYPE_PCIE_ROOT_PORT. pcie_chassis_add_slot() fails > with -EBUSY if there's an existing PCIESlot that has the same > chassis/slot value, regardless of being in a different bus. > > One way to prevent this error is simply set chassis and slot values in > the command line. However, since phb3 root buses only supports a single > root port, we can just get an unique chassis/slot value by checking > which root bus the pnv_phb3_root_port is going to be attached, get the > equivalent phb3 device and use its chip-id and index values, which are > guaranteed to be unique. > > Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Thanks, C. > --- > hw/pci-host/pnv_phb3.c | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/hw/pci-host/pnv_phb3.c b/hw/pci-host/pnv_phb3.c > index c78084cce7..3467bbb5d9 100644 > --- a/hw/pci-host/pnv_phb3.c > +++ b/hw/pci-host/pnv_phb3.c > @@ -1142,8 +1142,24 @@ static const TypeInfo pnv_phb3_root_bus_info = { > static void pnv_phb3_root_port_realize(DeviceState *dev, Error **errp) > { > PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev); > + PCIDevice *pci = PCI_DEVICE(dev); > + PCIBus *bus = pci_get_bus(pci); > + PnvPHB3 *phb = NULL; > Error *local_err = NULL; > > + phb = (PnvPHB3 *) object_dynamic_cast(OBJECT(bus->qbus.parent), > + TYPE_PNV_PHB3); > + > + if (!phb) { > + error_setg(errp, > +"pnv_phb3_root_port devices must be connected to pnv-phb3 buses"); > + return; > + } > + > + /* Set unique chassis/slot values for the root port */ > + qdev_prop_set_uint8(&pci->qdev, "chassis", phb->chip_id); > + qdev_prop_set_uint16(&pci->qdev, "slot", phb->phb_id); > + > rpc->parent_realize(dev, &local_err); > if (local_err) { > error_propagate(errp, local_err); >
diff --git a/hw/pci-host/pnv_phb3.c b/hw/pci-host/pnv_phb3.c index c78084cce7..3467bbb5d9 100644 --- a/hw/pci-host/pnv_phb3.c +++ b/hw/pci-host/pnv_phb3.c @@ -1142,8 +1142,24 @@ static const TypeInfo pnv_phb3_root_bus_info = { static void pnv_phb3_root_port_realize(DeviceState *dev, Error **errp) { PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev); + PCIDevice *pci = PCI_DEVICE(dev); + PCIBus *bus = pci_get_bus(pci); + PnvPHB3 *phb = NULL; Error *local_err = NULL; + phb = (PnvPHB3 *) object_dynamic_cast(OBJECT(bus->qbus.parent), + TYPE_PNV_PHB3); + + if (!phb) { + error_setg(errp, +"pnv_phb3_root_port devices must be connected to pnv-phb3 buses"); + return; + } + + /* Set unique chassis/slot values for the root port */ + qdev_prop_set_uint8(&pci->qdev, "chassis", phb->chip_id); + qdev_prop_set_uint16(&pci->qdev, "slot", phb->phb_id); + rpc->parent_realize(dev, &local_err); if (local_err) { error_propagate(errp, local_err);
When creating a pnv_phb3_root_port using the command line, the first root port is created successfully, but the second fails with the following error: qemu-system-ppc64: -device pnv-phb3-root-port,bus=phb3-root.0,id=pcie.3: Can't add chassis slot, error -16 This error comes from the realize() function of its parent type, rp_realize() from TYPE_PCIE_ROOT_PORT. pcie_chassis_add_slot() fails with -EBUSY if there's an existing PCIESlot that has the same chassis/slot value, regardless of being in a different bus. One way to prevent this error is simply set chassis and slot values in the command line. However, since phb3 root buses only supports a single root port, we can just get an unique chassis/slot value by checking which root bus the pnv_phb3_root_port is going to be attached, get the equivalent phb3 device and use its chip-id and index values, which are guaranteed to be unique. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> --- hw/pci-host/pnv_phb3.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)