| Message ID | 20220101182806.19311-8-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: i2c: max9286: Small new features | expand |
Hi Laurent, On Sat, Jan 01, 2022 at 08:28:02PM +0200, Laurent Pinchart wrote: > Add support for 12-bit raw bayer formats to the driver, configuring the > GMSL format accordingly. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > drivers/media/i2c/max9286.c | 128 ++++++++++++++++++++++++++---------- > 1 file changed, 95 insertions(+), 33 deletions(-) > > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c > index 576d9c6fac14..24c2bf4fda53 100644 > --- a/drivers/media/i2c/max9286.c > +++ b/drivers/media/i2c/max9286.c > @@ -135,6 +135,11 @@ > #define MAX9286_N_PADS 5 > #define MAX9286_SRC_PAD 4 > > +struct max9286_format_info { > + u32 code; > + u8 datatype; > +}; > + > struct max9286_source { > struct v4l2_subdev *sd; > struct fwnode_handle *fwnode; > @@ -214,6 +219,34 @@ static inline struct max9286_priv *sd_to_max9286(struct v4l2_subdev *sd) > return container_of(sd, struct max9286_priv, sd); > } > > +static const struct max9286_format_info max9286_formats[] = { > + { > + .code = MEDIA_BUS_FMT_UYVY8_1X16, > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > + }, { > + .code = MEDIA_BUS_FMT_VYUY8_1X16, > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > + }, { > + .code = MEDIA_BUS_FMT_YUYV8_1X16, > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > + }, { > + .code = MEDIA_BUS_FMT_YVYU8_1X16, > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > + }, { > + .code = MEDIA_BUS_FMT_SBGGR12_1X12, > + .datatype = MAX9286_DATATYPE_RAW12, > + }, { > + .code = MEDIA_BUS_FMT_SGBRG12_1X12, > + .datatype = MAX9286_DATATYPE_RAW12, > + }, { > + .code = MEDIA_BUS_FMT_SGRBG12_1X12, > + .datatype = MAX9286_DATATYPE_RAW12, > + }, { > + .code = MEDIA_BUS_FMT_SRGGB12_1X12, > + .datatype = MAX9286_DATATYPE_RAW12, > + }, > +}; > + > /* ----------------------------------------------------------------------------- > * I2C IO > */ > @@ -475,6 +508,38 @@ static int max9286_check_config_link(struct max9286_priv *priv, > return 0; > } > > +static void max9286_set_video_format(struct max9286_priv *priv, > + const struct v4l2_mbus_framefmt *format) > +{ > + const struct max9286_format_info *info = NULL; > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { > + if (max9286_formats[i].code == format->code) { > + info = &max9286_formats[i]; > + break; > + } > + } > + > + if (WARN_ON(!info)) > + return; > + > + /* > + * Video format setup: > + * Disable CSI output, VC is set according to Link number. > + */ > + max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); I'm a bit scared about the fact settnig the video format disables the CSI-2 output. But for the current usage pattern, it seems ok > + > + /* Enable CSI-2 Lane D0-D3 only, DBL mode. */ > + max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | > + MAX9286_CSILANECNT(priv->csi2_data_lanes) | > + info->datatype); > + > + /* Enable HS/VS encoding, use D14/15 for HS/VS, invert VS. */ > + max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_INVVS | > + MAX9286_HVSRC_D14); > +} > + > static void max9286_set_fsync_period(struct max9286_priv *priv) > { > u32 fsync; > @@ -693,6 +758,15 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable) > int ret; > > if (enable) { > + const struct v4l2_mbus_framefmt *format; > + > + /* > + * Get the format from the first used sink pad, as all sink > + * formats must be identical. > + */ > + format = &priv->fmt[__ffs(priv->bound_sources)]; > + > + max9286_set_video_format(priv, format); > max9286_set_fsync_period(priv); > > /* > @@ -813,22 +887,20 @@ static int max9286_set_fmt(struct v4l2_subdev *sd, > { > struct max9286_priv *priv = sd_to_max9286(sd); > struct v4l2_mbus_framefmt *cfg_fmt; > + unsigned int i; > > if (format->pad == MAX9286_SRC_PAD) > return -EINVAL; > > - /* Refuse non YUV422 formats as we hardcode DT to 8 bit YUV422 */ > - switch (format->format.code) { > - case MEDIA_BUS_FMT_UYVY8_1X16: > - case MEDIA_BUS_FMT_VYUY8_1X16: > - case MEDIA_BUS_FMT_YUYV8_1X16: > - case MEDIA_BUS_FMT_YVYU8_1X16: > - break; > - default: > - format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; > - break; > + /* Validate the format. */ > + for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { > + if (max9286_formats[i].code == format->format.code) > + break; > } > > + if (i == ARRAY_SIZE(max9286_formats)) > + format->format.code = max9286_formats[i].code; Isn't i past the end of the array now ? > + > cfg_fmt = max9286_get_pad_format(priv, sd_state, format->pad, > format->which); > if (!cfg_fmt) > @@ -886,16 +958,20 @@ static const struct v4l2_subdev_ops max9286_subdev_ops = { > .pad = &max9286_pad_ops, > }; > > +static const struct v4l2_mbus_framefmt max9286_default_format = { > + .width = 1280, > + .height = 800, > + .code = MEDIA_BUS_FMT_UYVY8_1X16, > + .colorspace = V4L2_COLORSPACE_SRGB, > + .field = V4L2_FIELD_NONE, > + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, > + .quantization = V4L2_QUANTIZATION_DEFAULT, > + .xfer_func = V4L2_XFER_FUNC_DEFAULT, > +}; > + > static void max9286_init_format(struct v4l2_mbus_framefmt *fmt) > { > - fmt->width = 1280; > - fmt->height = 800; > - fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; > - fmt->colorspace = V4L2_COLORSPACE_SRGB; > - fmt->field = V4L2_FIELD_NONE; > - fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > - fmt->quantization = V4L2_QUANTIZATION_DEFAULT; > - fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; > + *fmt = max9286_default_format; > } > > static int max9286_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) > @@ -1054,23 +1130,9 @@ static int max9286_setup(struct max9286_priv *priv) > max9286_write(priv, 0x0b, link_order[priv->route_mask]); > max9286_write(priv, 0x69, (0xf & ~priv->route_mask)); > > - /* > - * Video format setup: > - * Disable CSI output, VC is set according to Link number. > - */ > - max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); > - > - /* Enable CSI-2 Lane D0-D3 only, DBL mode, YUV422 8-bit. */ > - max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | > - MAX9286_CSILANECNT(priv->csi2_data_lanes) | > - MAX9286_DATATYPE_YUV422_8BIT); > - > + max9286_set_video_format(priv, &max9286_default_format); > max9286_set_fsync_period(priv); > > - /* Enable HS/VS encoding, use D14/15 for HS/VS, invert VS. */ > - max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_INVVS | > - MAX9286_HVSRC_D14); > - > /* > * The overlap window seems to provide additional validation by tracking > * the delay between vsync and frame sync, generating an error if the > -- > Regards, > > Laurent Pinchart >
Hi Jacopo, On Sun, Jan 09, 2022 at 11:34:09AM +0100, Jacopo Mondi wrote: > On Sat, Jan 01, 2022 at 08:28:02PM +0200, Laurent Pinchart wrote: > > Add support for 12-bit raw bayer formats to the driver, configuring the > > GMSL format accordingly. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > --- > > drivers/media/i2c/max9286.c | 128 ++++++++++++++++++++++++++---------- > > 1 file changed, 95 insertions(+), 33 deletions(-) > > > > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c > > index 576d9c6fac14..24c2bf4fda53 100644 > > --- a/drivers/media/i2c/max9286.c > > +++ b/drivers/media/i2c/max9286.c > > @@ -135,6 +135,11 @@ > > #define MAX9286_N_PADS 5 > > #define MAX9286_SRC_PAD 4 > > > > +struct max9286_format_info { > > + u32 code; > > + u8 datatype; > > +}; > > + > > struct max9286_source { > > struct v4l2_subdev *sd; > > struct fwnode_handle *fwnode; > > @@ -214,6 +219,34 @@ static inline struct max9286_priv *sd_to_max9286(struct v4l2_subdev *sd) > > return container_of(sd, struct max9286_priv, sd); > > } > > > > +static const struct max9286_format_info max9286_formats[] = { > > + { > > + .code = MEDIA_BUS_FMT_UYVY8_1X16, > > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > > + }, { > > + .code = MEDIA_BUS_FMT_VYUY8_1X16, > > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > > + }, { > > + .code = MEDIA_BUS_FMT_YUYV8_1X16, > > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > > + }, { > > + .code = MEDIA_BUS_FMT_YVYU8_1X16, > > + .datatype = MAX9286_DATATYPE_YUV422_8BIT, > > + }, { > > + .code = MEDIA_BUS_FMT_SBGGR12_1X12, > > + .datatype = MAX9286_DATATYPE_RAW12, > > + }, { > > + .code = MEDIA_BUS_FMT_SGBRG12_1X12, > > + .datatype = MAX9286_DATATYPE_RAW12, > > + }, { > > + .code = MEDIA_BUS_FMT_SGRBG12_1X12, > > + .datatype = MAX9286_DATATYPE_RAW12, > > + }, { > > + .code = MEDIA_BUS_FMT_SRGGB12_1X12, > > + .datatype = MAX9286_DATATYPE_RAW12, > > + }, > > +}; > > + > > /* ----------------------------------------------------------------------------- > > * I2C IO > > */ > > @@ -475,6 +508,38 @@ static int max9286_check_config_link(struct max9286_priv *priv, > > return 0; > > } > > > > +static void max9286_set_video_format(struct max9286_priv *priv, > > + const struct v4l2_mbus_framefmt *format) > > +{ > > + const struct max9286_format_info *info = NULL; > > + unsigned int i; > > + > > + for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { > > + if (max9286_formats[i].code == format->code) { > > + info = &max9286_formats[i]; > > + break; > > + } > > + } > > + > > + if (WARN_ON(!info)) > > + return; > > + > > + /* > > + * Video format setup: > > + * Disable CSI output, VC is set according to Link number. > > + */ > > + max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); > > I'm a bit scared about the fact settnig the video format disables the > CSI-2 output. But for the current usage pattern, it seems ok I'd like to further reorganize this (on top of this series) by avoiding the max9286_set_video_format() call from max9286_setup(), as that shouldn't be needed at probe time. > > + > > + /* Enable CSI-2 Lane D0-D3 only, DBL mode. */ > > + max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | > > + MAX9286_CSILANECNT(priv->csi2_data_lanes) | > > + info->datatype); > > + > > + /* Enable HS/VS encoding, use D14/15 for HS/VS, invert VS. */ > > + max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_INVVS | > > + MAX9286_HVSRC_D14); > > +} > > + > > static void max9286_set_fsync_period(struct max9286_priv *priv) > > { > > u32 fsync; > > @@ -693,6 +758,15 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable) > > int ret; > > > > if (enable) { > > + const struct v4l2_mbus_framefmt *format; > > + > > + /* > > + * Get the format from the first used sink pad, as all sink > > + * formats must be identical. > > + */ > > + format = &priv->fmt[__ffs(priv->bound_sources)]; > > + > > + max9286_set_video_format(priv, format); > > max9286_set_fsync_period(priv); > > > > /* > > @@ -813,22 +887,20 @@ static int max9286_set_fmt(struct v4l2_subdev *sd, > > { > > struct max9286_priv *priv = sd_to_max9286(sd); > > struct v4l2_mbus_framefmt *cfg_fmt; > > + unsigned int i; > > > > if (format->pad == MAX9286_SRC_PAD) > > return -EINVAL; > > > > - /* Refuse non YUV422 formats as we hardcode DT to 8 bit YUV422 */ > > - switch (format->format.code) { > > - case MEDIA_BUS_FMT_UYVY8_1X16: > > - case MEDIA_BUS_FMT_VYUY8_1X16: > > - case MEDIA_BUS_FMT_YUYV8_1X16: > > - case MEDIA_BUS_FMT_YVYU8_1X16: > > - break; > > - default: > > - format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; > > - break; > > + /* Validate the format. */ > > + for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { > > + if (max9286_formats[i].code == format->format.code) > > + break; > > } > > > > + if (i == ARRAY_SIZE(max9286_formats)) > > + format->format.code = max9286_formats[i].code; > > Isn't i past the end of the array now ? Oops, it should be [0]. I'll fix it. > > + > > cfg_fmt = max9286_get_pad_format(priv, sd_state, format->pad, > > format->which); > > if (!cfg_fmt) > > @@ -886,16 +958,20 @@ static const struct v4l2_subdev_ops max9286_subdev_ops = { > > .pad = &max9286_pad_ops, > > }; > > > > +static const struct v4l2_mbus_framefmt max9286_default_format = { > > + .width = 1280, > > + .height = 800, > > + .code = MEDIA_BUS_FMT_UYVY8_1X16, > > + .colorspace = V4L2_COLORSPACE_SRGB, > > + .field = V4L2_FIELD_NONE, > > + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, > > + .quantization = V4L2_QUANTIZATION_DEFAULT, > > + .xfer_func = V4L2_XFER_FUNC_DEFAULT, > > +}; > > + > > static void max9286_init_format(struct v4l2_mbus_framefmt *fmt) > > { > > - fmt->width = 1280; > > - fmt->height = 800; > > - fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; > > - fmt->colorspace = V4L2_COLORSPACE_SRGB; > > - fmt->field = V4L2_FIELD_NONE; > > - fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > > - fmt->quantization = V4L2_QUANTIZATION_DEFAULT; > > - fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; > > + *fmt = max9286_default_format; > > } > > > > static int max9286_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) > > @@ -1054,23 +1130,9 @@ static int max9286_setup(struct max9286_priv *priv) > > max9286_write(priv, 0x0b, link_order[priv->route_mask]); > > max9286_write(priv, 0x69, (0xf & ~priv->route_mask)); > > > > - /* > > - * Video format setup: > > - * Disable CSI output, VC is set according to Link number. > > - */ > > - max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); > > - > > - /* Enable CSI-2 Lane D0-D3 only, DBL mode, YUV422 8-bit. */ > > - max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | > > - MAX9286_CSILANECNT(priv->csi2_data_lanes) | > > - MAX9286_DATATYPE_YUV422_8BIT); > > - > > + max9286_set_video_format(priv, &max9286_default_format); > > max9286_set_fsync_period(priv); > > > > - /* Enable HS/VS encoding, use D14/15 for HS/VS, invert VS. */ > > - max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_INVVS | > > - MAX9286_HVSRC_D14); > > - > > /* > > * The overlap window seems to provide additional validation by tracking > > * the delay between vsync and frame sync, generating an error if the
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index 576d9c6fac14..24c2bf4fda53 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -135,6 +135,11 @@ #define MAX9286_N_PADS 5 #define MAX9286_SRC_PAD 4 +struct max9286_format_info { + u32 code; + u8 datatype; +}; + struct max9286_source { struct v4l2_subdev *sd; struct fwnode_handle *fwnode; @@ -214,6 +219,34 @@ static inline struct max9286_priv *sd_to_max9286(struct v4l2_subdev *sd) return container_of(sd, struct max9286_priv, sd); } +static const struct max9286_format_info max9286_formats[] = { + { + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .datatype = MAX9286_DATATYPE_YUV422_8BIT, + }, { + .code = MEDIA_BUS_FMT_VYUY8_1X16, + .datatype = MAX9286_DATATYPE_YUV422_8BIT, + }, { + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .datatype = MAX9286_DATATYPE_YUV422_8BIT, + }, { + .code = MEDIA_BUS_FMT_YVYU8_1X16, + .datatype = MAX9286_DATATYPE_YUV422_8BIT, + }, { + .code = MEDIA_BUS_FMT_SBGGR12_1X12, + .datatype = MAX9286_DATATYPE_RAW12, + }, { + .code = MEDIA_BUS_FMT_SGBRG12_1X12, + .datatype = MAX9286_DATATYPE_RAW12, + }, { + .code = MEDIA_BUS_FMT_SGRBG12_1X12, + .datatype = MAX9286_DATATYPE_RAW12, + }, { + .code = MEDIA_BUS_FMT_SRGGB12_1X12, + .datatype = MAX9286_DATATYPE_RAW12, + }, +}; + /* ----------------------------------------------------------------------------- * I2C IO */ @@ -475,6 +508,38 @@ static int max9286_check_config_link(struct max9286_priv *priv, return 0; } +static void max9286_set_video_format(struct max9286_priv *priv, + const struct v4l2_mbus_framefmt *format) +{ + const struct max9286_format_info *info = NULL; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { + if (max9286_formats[i].code == format->code) { + info = &max9286_formats[i]; + break; + } + } + + if (WARN_ON(!info)) + return; + + /* + * Video format setup: + * Disable CSI output, VC is set according to Link number. + */ + max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); + + /* Enable CSI-2 Lane D0-D3 only, DBL mode. */ + max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | + MAX9286_CSILANECNT(priv->csi2_data_lanes) | + info->datatype); + + /* Enable HS/VS encoding, use D14/15 for HS/VS, invert VS. */ + max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_INVVS | + MAX9286_HVSRC_D14); +} + static void max9286_set_fsync_period(struct max9286_priv *priv) { u32 fsync; @@ -693,6 +758,15 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable) int ret; if (enable) { + const struct v4l2_mbus_framefmt *format; + + /* + * Get the format from the first used sink pad, as all sink + * formats must be identical. + */ + format = &priv->fmt[__ffs(priv->bound_sources)]; + + max9286_set_video_format(priv, format); max9286_set_fsync_period(priv); /* @@ -813,22 +887,20 @@ static int max9286_set_fmt(struct v4l2_subdev *sd, { struct max9286_priv *priv = sd_to_max9286(sd); struct v4l2_mbus_framefmt *cfg_fmt; + unsigned int i; if (format->pad == MAX9286_SRC_PAD) return -EINVAL; - /* Refuse non YUV422 formats as we hardcode DT to 8 bit YUV422 */ - switch (format->format.code) { - case MEDIA_BUS_FMT_UYVY8_1X16: - case MEDIA_BUS_FMT_VYUY8_1X16: - case MEDIA_BUS_FMT_YUYV8_1X16: - case MEDIA_BUS_FMT_YVYU8_1X16: - break; - default: - format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; - break; + /* Validate the format. */ + for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { + if (max9286_formats[i].code == format->format.code) + break; } + if (i == ARRAY_SIZE(max9286_formats)) + format->format.code = max9286_formats[i].code; + cfg_fmt = max9286_get_pad_format(priv, sd_state, format->pad, format->which); if (!cfg_fmt) @@ -886,16 +958,20 @@ static const struct v4l2_subdev_ops max9286_subdev_ops = { .pad = &max9286_pad_ops, }; +static const struct v4l2_mbus_framefmt max9286_default_format = { + .width = 1280, + .height = 800, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .colorspace = V4L2_COLORSPACE_SRGB, + .field = V4L2_FIELD_NONE, + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, + .quantization = V4L2_QUANTIZATION_DEFAULT, + .xfer_func = V4L2_XFER_FUNC_DEFAULT, +}; + static void max9286_init_format(struct v4l2_mbus_framefmt *fmt) { - fmt->width = 1280; - fmt->height = 800; - fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; - fmt->colorspace = V4L2_COLORSPACE_SRGB; - fmt->field = V4L2_FIELD_NONE; - fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; - fmt->quantization = V4L2_QUANTIZATION_DEFAULT; - fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; + *fmt = max9286_default_format; } static int max9286_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) @@ -1054,23 +1130,9 @@ static int max9286_setup(struct max9286_priv *priv) max9286_write(priv, 0x0b, link_order[priv->route_mask]); max9286_write(priv, 0x69, (0xf & ~priv->route_mask)); - /* - * Video format setup: - * Disable CSI output, VC is set according to Link number. - */ - max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); - - /* Enable CSI-2 Lane D0-D3 only, DBL mode, YUV422 8-bit. */ - max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | - MAX9286_CSILANECNT(priv->csi2_data_lanes) | - MAX9286_DATATYPE_YUV422_8BIT); - + max9286_set_video_format(priv, &max9286_default_format); max9286_set_fsync_period(priv); - /* Enable HS/VS encoding, use D14/15 for HS/VS, invert VS. */ - max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_INVVS | - MAX9286_HVSRC_D14); - /* * The overlap window seems to provide additional validation by tracking * the delay between vsync and frame sync, generating an error if the
Add support for 12-bit raw bayer formats to the driver, configuring the GMSL format accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/i2c/max9286.c | 128 ++++++++++++++++++++++++++---------- 1 file changed, 95 insertions(+), 33 deletions(-)