| Message ID | 20220107155215.1.I875ab8f28c5155a7d2f103316191954d4b07ac13@changeid (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Delegated to: | Chanwoo Choi |
| Headers | show |
| Series | rk3399: Clean up and enable DDR DVFS | expand |
On Fri, 07 Jan 2022 15:53:11 -0800, Brian Norris wrote: > I want to add, deprecate, and bugfix some properties, as well as add the > first users. This is easier with a proper schema. > > The transformation is mostly straightforward, plus a few notable tweaks: > > * Renamed rockchip,dram_speed_bin to rockchip,ddr3_speed_bin. The > driver code and the example matched, but the description was > different. I went with the implementation. > > * Drop upthreshold and downdifferential properties from the example. > These were undocumented (so, wouldn't pass validation), but were > representing software properties (governor tweaks). I drop them from > the driver in subsequent patches. > > * Rename clock from pclk_ddr_mon to dmc_clk. The driver, DT example, > and all downstream users matched -- the binding definition was the > exception. Anyway, "dmc_clk" is a more appropriately generic name. > > Signed-off-by: Brian Norris <briannorris@chromium.org> > --- > > .../bindings/devfreq/rk3399_dmc.txt | 212 ------------- > .../bindings/devfreq/rk3399_dmc.yaml | 297 ++++++++++++++++++ > 2 files changed, 297 insertions(+), 212 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt > create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml:37:5: [warning] wrong indentation: expected 6 but found 4 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1577007 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Fri, Jan 07, 2022 at 03:53:11PM -0800, Brian Norris wrote: > I want to add, deprecate, and bugfix some properties, as well as add the > first users. This is easier with a proper schema. > > The transformation is mostly straightforward, plus a few notable tweaks: > > * Renamed rockchip,dram_speed_bin to rockchip,ddr3_speed_bin. The > driver code and the example matched, but the description was > different. I went with the implementation. > > * Drop upthreshold and downdifferential properties from the example. > These were undocumented (so, wouldn't pass validation), but were > representing software properties (governor tweaks). I drop them from > the driver in subsequent patches. > > * Rename clock from pclk_ddr_mon to dmc_clk. The driver, DT example, > and all downstream users matched -- the binding definition was the > exception. Anyway, "dmc_clk" is a more appropriately generic name. generic is not really better, but okay. > > Signed-off-by: Brian Norris <briannorris@chromium.org> > --- > > .../bindings/devfreq/rk3399_dmc.txt | 212 ------------- > .../bindings/devfreq/rk3399_dmc.yaml | 297 ++++++++++++++++++ > 2 files changed, 297 insertions(+), 212 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt > create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml > > diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt > deleted file mode 100644 > index 58fc8a6cebc7..000000000000 > --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt > +++ /dev/null > @@ -1,212 +0,0 @@ > -* Rockchip rk3399 DMC (Dynamic Memory Controller) device > - > -Required properties: > -- compatible: Must be "rockchip,rk3399-dmc". > -- devfreq-events: Node to get DDR loading, Refer to > - Documentation/devicetree/bindings/devfreq/event/ > - rockchip-dfi.txt > -- clocks: Phandles for clock specified in "clock-names" property > -- clock-names : The name of clock used by the DFI, must be > - "pclk_ddr_mon"; > -- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml > - for details. > -- center-supply: DMC supply node. > -- status: Marks the node enabled/disabled. > -- rockchip,pmu: Phandle to the syscon managing the "PMU general register > - files". > - > -Optional properties: > -- interrupts: The CPU interrupt number. The interrupt specifier > - format depends on the interrupt controller. > - It should be a DCF interrupt. When DDR DVFS finishes > - a DCF interrupt is triggered. > -- rockchip,pmu: Phandle to the syscon managing the "PMU general register > - files". > - > -Following properties relate to DDR timing: > - > -- rockchip,dram_speed_bin : Value reference include/dt-bindings/clock/rk3399-ddr.h, > - it selects the DDR3 cl-trp-trcd type. It must be > - set according to "Speed Bin" in DDR3 datasheet, > - DO NOT use a smaller "Speed Bin" than specified > - for the DDR3 being used. > - > -- rockchip,pd_idle : Configure the PD_IDLE value. Defines the > - power-down idle period in which memories are > - placed into power-down mode if bus is idle > - for PD_IDLE DFI clock cycles. > - > -- rockchip,sr_idle : Configure the SR_IDLE value. Defines the > - self-refresh idle period in which memories are > - placed into self-refresh mode if bus is idle > - for SR_IDLE * 1024 DFI clock cycles (DFI > - clocks freq is half of DRAM clock), default > - value is "0". > - > -- rockchip,sr_mc_gate_idle : Defines the memory self-refresh and controller > - clock gating idle period. Memories are placed > - into self-refresh mode and memory controller > - clock arg gating started if bus is idle for > - sr_mc_gate_idle*1024 DFI clock cycles. > - > -- rockchip,srpd_lite_idle : Defines the self-refresh power down idle > - period in which memories are placed into > - self-refresh power down mode if bus is idle > - for srpd_lite_idle * 1024 DFI clock cycles. > - This parameter is for LPDDR4 only. > - > -- rockchip,standby_idle : Defines the standby idle period in which > - memories are placed into self-refresh mode. > - The controller, pi, PHY and DRAM clock will > - be gated if bus is idle for standby_idle * DFI > - clock cycles. > - > -- rockchip,dram_dll_dis_freq : Defines the DDR3 DLL bypass frequency in MHz. > - When DDR frequency is less than DRAM_DLL_DISB_FREQ, > - DDR3 DLL will be bypassed. Note: if DLL was bypassed, > - the odt will also stop working. > - > -- rockchip,phy_dll_dis_freq : Defines the PHY dll bypass frequency in > - MHz (Mega Hz). When DDR frequency is less than > - DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. > - Note: PHY DLL and PHY ODT are independent. > - > -- rockchip,ddr3_odt_dis_freq : When the DRAM type is DDR3, this parameter defines > - the ODT disable frequency in MHz (Mega Hz). > - when the DDR frequency is less then ddr3_odt_dis_freq, > - the ODT on the DRAM side and controller side are > - both disabled. > - > -- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines > - the DRAM side driver strength in ohms. Default > - value is 40. > - > -- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines > - the DRAM side ODT strength in ohms. Default value > - is 120. > - > -- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines > - the phy side CA line (incluing command line, > - address line and clock line) driver strength. > - Default value is 40. > - > -- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines > - the PHY side DQ line (including DQS/DQ/DM line) > - driver strength. Default value is 40. > - > -- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines > - the PHY side ODT strength. Default value is 240. > - > -- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines > - then ODT disable frequency in MHz (Mega Hz). > - When DDR frequency is less then ddr3_odt_dis_freq, > - the ODT on the DRAM side and controller side are > - both disabled. > - > -- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines > - the DRAM side driver strength in ohms. Default > - value is 34. > - > -- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines > - the DRAM side ODT strength in ohms. Default value > - is 240. > - > -- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines > - the PHY side CA line (including command line, > - address line and clock line) driver strength. > - Default value is 40. > - > -- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines > - the PHY side DQ line (including DQS/DQ/DM line) > - driver strength. Default value is 40. > - > -- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define > - the phy side odt strength, default value is 240. > - > -- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter > - defines the ODT disable frequency in > - MHz (Mega Hz). When the DDR frequency is less then > - ddr3_odt_dis_freq, the ODT on the DRAM side and > - controller side are both disabled. > - > -- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines > - the DRAM side driver strength in ohms. Default > - value is 60. > - > -- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines > - the DRAM side ODT on DQS/DQ line strength in ohms. > - Default value is 40. > - > -- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines > - the DRAM side ODT on CA line strength in ohms. > - Default value is 40. > - > -- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines > - the PHY side CA line (including command address > - line) driver strength. Default value is 40. > - > -- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines > - the PHY side clock line and CS line driver > - strength. Default value is 80. > - > -- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines > - the PHY side DQ line (including DQS/DQ/DM line) > - driver strength. Default value is 80. > - > -- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines > - the PHY side ODT strength. Default value is 60. > - > -Example: > - dmc_opp_table: dmc_opp_table { > - compatible = "operating-points-v2"; > - > - opp00 { > - opp-hz = /bits/ 64 <300000000>; > - opp-microvolt = <900000>; > - }; > - opp01 { > - opp-hz = /bits/ 64 <666000000>; > - opp-microvolt = <900000>; > - }; > - }; > - > - dmc: dmc { > - compatible = "rockchip,rk3399-dmc"; > - devfreq-events = <&dfi>; > - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cru SCLK_DDRC>; > - clock-names = "dmc_clk"; > - operating-points-v2 = <&dmc_opp_table>; > - center-supply = <&ppvar_centerlogic>; > - upthreshold = <15>; > - downdifferential = <10>; > - rockchip,ddr3_speed_bin = <21>; > - rockchip,pd_idle = <0x40>; > - rockchip,sr_idle = <0x2>; > - rockchip,sr_mc_gate_idle = <0x3>; > - rockchip,srpd_lite_idle = <0x4>; > - rockchip,standby_idle = <0x2000>; > - rockchip,dram_dll_dis_freq = <300>; > - rockchip,phy_dll_dis_freq = <125>; > - rockchip,auto_pd_dis_freq = <666>; > - rockchip,ddr3_odt_dis_freq = <333>; > - rockchip,ddr3_drv = <40>; > - rockchip,ddr3_odt = <120>; > - rockchip,phy_ddr3_ca_drv = <40>; > - rockchip,phy_ddr3_dq_drv = <40>; > - rockchip,phy_ddr3_odt = <240>; > - rockchip,lpddr3_odt_dis_freq = <333>; > - rockchip,lpddr3_drv = <34>; > - rockchip,lpddr3_odt = <240>; > - rockchip,phy_lpddr3_ca_drv = <40>; > - rockchip,phy_lpddr3_dq_drv = <40>; > - rockchip,phy_lpddr3_odt = <240>; > - rockchip,lpddr4_odt_dis_freq = <333>; > - rockchip,lpddr4_drv = <60>; > - rockchip,lpddr4_dq_odt = <40>; > - rockchip,lpddr4_ca_odt = <40>; > - rockchip,phy_lpddr4_ca_drv = <40>; > - rockchip,phy_lpddr4_ck_cs_drv = <80>; > - rockchip,phy_lpddr4_dq_drv = <80>; > - rockchip,phy_lpddr4_odt = <60>; > - }; > diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml > new file mode 100644 > index 000000000000..f12f34d93378 > --- /dev/null > +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml > @@ -0,0 +1,297 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# %YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/devfreq/rk3399_dmc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Rockchip rk3399 DMC (Dynamic Memory Controller) device > + > +maintainers: > + - Brian Norris <briannorris@chromium.org> > + > +required: 'required' normally goes after properties. > + - compatible > + - devfreq-events > + - clocks > + - clock-names > + - operating-points-v2 > + - center-supply > + > +properties: > + compatible: > + enum: > + - rockchip,rk3399-dmc > + > + devfreq-events: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + minItems: 1 > + description: > + Node to get DDR loading. Refer to > + Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt. > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: dmc_clk > + > + operating-points-v2: > + description: > + Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml for details. Drop generic, free form references. Just 'true' is fine here. > + > + center-supply: > + description: > + DMC regulator supply. > + > + rockchip,pmu: > + $ref: /schemas/types.yaml#/definitions/phandle > + maxItems: 1 'phandle' is already a single item. Drop. > + description: > + Phandle to the syscon managing the "PMU general register files". > + > + interrupts: > + maxItems: 1 > + description: > + The CPU interrupt number. The interrupt specifier format depends on the > + interrupt controller. It should be a DCF interrupt. When DDR DVFS > + finishes a DCF interrupt is triggered. You can drop 'The interrupt specifier format depends on the interrupt controller'. > + > + rockchip,ddr3_speed_bin: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the > + DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3 > + datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3 > + being used. > + > + rockchip,pd_idle: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Configure the PD_IDLE value. Defines the power-down idle period in which > + memories are placed into power-down mode if bus is idle for PD_IDLE DFI > + clock cycles. > + > + rockchip,sr_idle: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Configure the SR_IDLE value. Defines the self-refresh idle period in > + which memories are placed into self-refresh mode if bus is idle for > + SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock), > + default value is "0". > + > + rockchip,sr_mc_gate_idle: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Defines the memory self-refresh and controller clock gating idle period. > + Memories are placed into self-refresh mode and memory controller clock > + arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock > + cycles. > + > + rockchip,srpd_lite_idle: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Defines the self-refresh power down idle period in which memories are > + placed into self-refresh power down mode if bus is idle for > + srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4 > + only. > + > + rockchip,standby_idle: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Defines the standby idle period in which memories are placed into > + self-refresh mode. The controller, pi, PHY and DRAM clock will be gated > + if bus is idle for standby_idle * DFI clock cycles. > + > + rockchip,dram_dll_dis_freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less > + than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed. > + Note: if DLL was bypassed, the odt will also stop working. > + > + rockchip,phy_dll_dis_freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency > + is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. > + Note: PHY DLL and PHY ODT are independent. > + > + rockchip,auto_pd_dis_freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Defines the auto PD disable frequency in MHz. > + > + rockchip,ddr3_odt_dis_freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is DDR3, this parameter defines the ODT disable > + frequency in MHz (Mega Hz). When the DDR frequency is less then > + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both > + disabled. > + > + rockchip,ddr3_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is DDR3, this parameter defines the DRAM side drive > + strength in ohms. Default value is 40. > + > + rockchip,ddr3_odt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is DDR3, this parameter defines the DRAM side ODT > + strength in ohms. Default value is 120. > + > + rockchip,phy_ddr3_ca_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is DDR3, this parameter defines the phy side CA line > + (incluing command line, address line and clock line) drive strength. > + Default value is 40. > + > + rockchip,phy_ddr3_dq_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is DDR3, this parameter defines the PHY side DQ line > + (including DQS/DQ/DM line) drive strength. Default value is 40. > + > + rockchip,phy_ddr3_odt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is DDR3, this parameter defines the PHY side ODT > + strength. Default value is 240. > + > + rockchip,lpddr3_odt_dis_freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR3, this parameter defines then ODT disable > + frequency in MHz (Mega Hz). When DDR frequency is less then > + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both > + disabled. > + > + rockchip,lpddr3_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR3, this parameter defines the DRAM side drive > + strength in ohms. Default value is 34. > + > + rockchip,lpddr3_odt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT > + strength in ohms. Default value is 240. > + > + rockchip,phy_lpddr3_ca_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR3, this parameter defines the PHY side CA line > + (including command line, address line and clock line) drive strength. > + Default value is 40. > + > + rockchip,phy_lpddr3_dq_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line > + (including DQS/DQ/DM line) drive strength. Default value is 40. > + > + rockchip,phy_lpddr3_odt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When dram type is LPDDR3, this parameter define the phy side odt > + strength, default value is 240. > + > + rockchip,lpddr4_odt_dis_freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the ODT disable > + frequency in MHz (Mega Hz). When the DDR frequency is less then > + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both > + disabled. > + > + rockchip,lpddr4_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the DRAM side drive > + strength in ohms. Default value is 60. > + > + rockchip,lpddr4_dq_odt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on > + DQS/DQ line strength in ohms. Default value is 40. > + > + rockchip,lpddr4_ca_odt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on > + CA line strength in ohms. Default value is 40. > + > + rockchip,phy_lpddr4_ca_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the PHY side CA line > + (including command address line) drive strength. Default value is 40. > + > + rockchip,phy_lpddr4_ck_cs_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the PHY side clock > + line and CS line drive strength. Default value is 80. > + > + rockchip,phy_lpddr4_dq_drv: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line > + (including DQS/DQ/DM line) drive strength. Default value is 80. > + > + rockchip,phy_lpddr4_odt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + When the DRAM type is LPDDR4, this parameter defines the PHY side ODT > + strength. Default value is 60. > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/rk3399-cru.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + dmc: dmc { memory-controller { > + compatible = "rockchip,rk3399-dmc"; > + devfreq-events = <&dfi>; > + rockchip,pmu = <&pmu>; > + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru SCLK_DDRC>; > + clock-names = "dmc_clk"; > + operating-points-v2 = <&dmc_opp_table>; > + center-supply = <&ppvar_centerlogic>; > + rockchip,ddr3_speed_bin = <21>; > + rockchip,pd_idle = <0x40>; > + rockchip,sr_idle = <0x2>; > + rockchip,sr_mc_gate_idle = <0x3>; > + rockchip,srpd_lite_idle = <0x4>; > + rockchip,standby_idle = <0x2000>; > + rockchip,dram_dll_dis_freq = <300>; > + rockchip,phy_dll_dis_freq = <125>; > + rockchip,auto_pd_dis_freq = <666>; > + rockchip,ddr3_odt_dis_freq = <333>; > + rockchip,ddr3_drv = <40>; > + rockchip,ddr3_odt = <120>; > + rockchip,phy_ddr3_ca_drv = <40>; > + rockchip,phy_ddr3_dq_drv = <40>; > + rockchip,phy_ddr3_odt = <240>; > + rockchip,lpddr3_odt_dis_freq = <333>; > + rockchip,lpddr3_drv = <34>; > + rockchip,lpddr3_odt = <240>; > + rockchip,phy_lpddr3_ca_drv = <40>; > + rockchip,phy_lpddr3_dq_drv = <40>; > + rockchip,phy_lpddr3_odt = <240>; > + rockchip,lpddr4_odt_dis_freq = <333>; > + rockchip,lpddr4_drv = <60>; > + rockchip,lpddr4_dq_odt = <40>; > + rockchip,lpddr4_ca_odt = <40>; > + rockchip,phy_lpddr4_ca_drv = <40>; > + rockchip,phy_lpddr4_ck_cs_drv = <80>; > + rockchip,phy_lpddr4_dq_drv = <80>; > + rockchip,phy_lpddr4_odt = <60>; > + }; > -- > 2.34.1.575.g55b058a8bb-goog > >
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt deleted file mode 100644 index 58fc8a6cebc7..000000000000 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ /dev/null @@ -1,212 +0,0 @@ -* Rockchip rk3399 DMC (Dynamic Memory Controller) device - -Required properties: -- compatible: Must be "rockchip,rk3399-dmc". -- devfreq-events: Node to get DDR loading, Refer to - Documentation/devicetree/bindings/devfreq/event/ - rockchip-dfi.txt -- clocks: Phandles for clock specified in "clock-names" property -- clock-names : The name of clock used by the DFI, must be - "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml - for details. -- center-supply: DMC supply node. -- status: Marks the node enabled/disabled. -- rockchip,pmu: Phandle to the syscon managing the "PMU general register - files". - -Optional properties: -- interrupts: The CPU interrupt number. The interrupt specifier - format depends on the interrupt controller. - It should be a DCF interrupt. When DDR DVFS finishes - a DCF interrupt is triggered. -- rockchip,pmu: Phandle to the syscon managing the "PMU general register - files". - -Following properties relate to DDR timing: - -- rockchip,dram_speed_bin : Value reference include/dt-bindings/clock/rk3399-ddr.h, - it selects the DDR3 cl-trp-trcd type. It must be - set according to "Speed Bin" in DDR3 datasheet, - DO NOT use a smaller "Speed Bin" than specified - for the DDR3 being used. - -- rockchip,pd_idle : Configure the PD_IDLE value. Defines the - power-down idle period in which memories are - placed into power-down mode if bus is idle - for PD_IDLE DFI clock cycles. - -- rockchip,sr_idle : Configure the SR_IDLE value. Defines the - self-refresh idle period in which memories are - placed into self-refresh mode if bus is idle - for SR_IDLE * 1024 DFI clock cycles (DFI - clocks freq is half of DRAM clock), default - value is "0". - -- rockchip,sr_mc_gate_idle : Defines the memory self-refresh and controller - clock gating idle period. Memories are placed - into self-refresh mode and memory controller - clock arg gating started if bus is idle for - sr_mc_gate_idle*1024 DFI clock cycles. - -- rockchip,srpd_lite_idle : Defines the self-refresh power down idle - period in which memories are placed into - self-refresh power down mode if bus is idle - for srpd_lite_idle * 1024 DFI clock cycles. - This parameter is for LPDDR4 only. - -- rockchip,standby_idle : Defines the standby idle period in which - memories are placed into self-refresh mode. - The controller, pi, PHY and DRAM clock will - be gated if bus is idle for standby_idle * DFI - clock cycles. - -- rockchip,dram_dll_dis_freq : Defines the DDR3 DLL bypass frequency in MHz. - When DDR frequency is less than DRAM_DLL_DISB_FREQ, - DDR3 DLL will be bypassed. Note: if DLL was bypassed, - the odt will also stop working. - -- rockchip,phy_dll_dis_freq : Defines the PHY dll bypass frequency in - MHz (Mega Hz). When DDR frequency is less than - DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. - Note: PHY DLL and PHY ODT are independent. - -- rockchip,ddr3_odt_dis_freq : When the DRAM type is DDR3, this parameter defines - the ODT disable frequency in MHz (Mega Hz). - when the DDR frequency is less then ddr3_odt_dis_freq, - the ODT on the DRAM side and controller side are - both disabled. - -- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines - the DRAM side driver strength in ohms. Default - value is 40. - -- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines - the DRAM side ODT strength in ohms. Default value - is 120. - -- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines - the phy side CA line (incluing command line, - address line and clock line) driver strength. - Default value is 40. - -- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 40. - -- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines - the PHY side ODT strength. Default value is 240. - -- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines - then ODT disable frequency in MHz (Mega Hz). - When DDR frequency is less then ddr3_odt_dis_freq, - the ODT on the DRAM side and controller side are - both disabled. - -- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines - the DRAM side driver strength in ohms. Default - value is 34. - -- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines - the DRAM side ODT strength in ohms. Default value - is 240. - -- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines - the PHY side CA line (including command line, - address line and clock line) driver strength. - Default value is 40. - -- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 40. - -- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define - the phy side odt strength, default value is 240. - -- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter - defines the ODT disable frequency in - MHz (Mega Hz). When the DDR frequency is less then - ddr3_odt_dis_freq, the ODT on the DRAM side and - controller side are both disabled. - -- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines - the DRAM side driver strength in ohms. Default - value is 60. - -- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines - the DRAM side ODT on DQS/DQ line strength in ohms. - Default value is 40. - -- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines - the DRAM side ODT on CA line strength in ohms. - Default value is 40. - -- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side CA line (including command address - line) driver strength. Default value is 40. - -- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side clock line and CS line driver - strength. Default value is 80. - -- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 80. - -- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines - the PHY side ODT strength. Default value is 60. - -Example: - dmc_opp_table: dmc_opp_table { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <900000>; - }; - opp01 { - opp-hz = /bits/ 64 <666000000>; - opp-microvolt = <900000>; - }; - }; - - dmc: dmc { - compatible = "rockchip,rk3399-dmc"; - devfreq-events = <&dfi>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_DDRC>; - clock-names = "dmc_clk"; - operating-points-v2 = <&dmc_opp_table>; - center-supply = <&ppvar_centerlogic>; - upthreshold = <15>; - downdifferential = <10>; - rockchip,ddr3_speed_bin = <21>; - rockchip,pd_idle = <0x40>; - rockchip,sr_idle = <0x2>; - rockchip,sr_mc_gate_idle = <0x3>; - rockchip,srpd_lite_idle = <0x4>; - rockchip,standby_idle = <0x2000>; - rockchip,dram_dll_dis_freq = <300>; - rockchip,phy_dll_dis_freq = <125>; - rockchip,auto_pd_dis_freq = <666>; - rockchip,ddr3_odt_dis_freq = <333>; - rockchip,ddr3_drv = <40>; - rockchip,ddr3_odt = <120>; - rockchip,phy_ddr3_ca_drv = <40>; - rockchip,phy_ddr3_dq_drv = <40>; - rockchip,phy_ddr3_odt = <240>; - rockchip,lpddr3_odt_dis_freq = <333>; - rockchip,lpddr3_drv = <34>; - rockchip,lpddr3_odt = <240>; - rockchip,phy_lpddr3_ca_drv = <40>; - rockchip,phy_lpddr3_dq_drv = <40>; - rockchip,phy_lpddr3_odt = <240>; - rockchip,lpddr4_odt_dis_freq = <333>; - rockchip,lpddr4_drv = <60>; - rockchip,lpddr4_dq_odt = <40>; - rockchip,lpddr4_ca_odt = <40>; - rockchip,phy_lpddr4_ca_drv = <40>; - rockchip,phy_lpddr4_ck_cs_drv = <80>; - rockchip,phy_lpddr4_dq_drv = <80>; - rockchip,phy_lpddr4_odt = <60>; - }; diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml new file mode 100644 index 000000000000..f12f34d93378 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# %YAML 1.2 +--- +$id: http://devicetree.org/schemas/devfreq/rk3399_dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3399 DMC (Dynamic Memory Controller) device + +maintainers: + - Brian Norris <briannorris@chromium.org> + +required: + - compatible + - devfreq-events + - clocks + - clock-names + - operating-points-v2 + - center-supply + +properties: + compatible: + enum: + - rockchip,rk3399-dmc + + devfreq-events: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + description: + Node to get DDR loading. Refer to + Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt. + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dmc_clk + + operating-points-v2: + description: + Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml for details. + + center-supply: + description: + DMC regulator supply. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 + description: + Phandle to the syscon managing the "PMU general register files". + + interrupts: + maxItems: 1 + description: + The CPU interrupt number. The interrupt specifier format depends on the + interrupt controller. It should be a DCF interrupt. When DDR DVFS + finishes a DCF interrupt is triggered. + + rockchip,ddr3_speed_bin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the + DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3 + datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3 + being used. + + rockchip,pd_idle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Configure the PD_IDLE value. Defines the power-down idle period in which + memories are placed into power-down mode if bus is idle for PD_IDLE DFI + clock cycles. + + rockchip,sr_idle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Configure the SR_IDLE value. Defines the self-refresh idle period in + which memories are placed into self-refresh mode if bus is idle for + SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock), + default value is "0". + + rockchip,sr_mc_gate_idle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the memory self-refresh and controller clock gating idle period. + Memories are placed into self-refresh mode and memory controller clock + arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock + cycles. + + rockchip,srpd_lite_idle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the self-refresh power down idle period in which memories are + placed into self-refresh power down mode if bus is idle for + srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4 + only. + + rockchip,standby_idle: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the standby idle period in which memories are placed into + self-refresh mode. The controller, pi, PHY and DRAM clock will be gated + if bus is idle for standby_idle * DFI clock cycles. + + rockchip,dram_dll_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less + than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed. + Note: if DLL was bypassed, the odt will also stop working. + + rockchip,phy_dll_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency + is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. + Note: PHY DLL and PHY ODT are independent. + + rockchip,auto_pd_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the auto PD disable frequency in MHz. + + rockchip,ddr3_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the ODT disable + frequency in MHz (Mega Hz). When the DDR frequency is less then + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both + disabled. + + rockchip,ddr3_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the DRAM side drive + strength in ohms. Default value is 40. + + rockchip,ddr3_odt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the DRAM side ODT + strength in ohms. Default value is 120. + + rockchip,phy_ddr3_ca_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the phy side CA line + (incluing command line, address line and clock line) drive strength. + Default value is 40. + + rockchip,phy_ddr3_dq_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. Default value is 40. + + rockchip,phy_ddr3_odt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the PHY side ODT + strength. Default value is 240. + + rockchip,lpddr3_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines then ODT disable + frequency in MHz (Mega Hz). When DDR frequency is less then + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both + disabled. + + rockchip,lpddr3_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the DRAM side drive + strength in ohms. Default value is 34. + + rockchip,lpddr3_odt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT + strength in ohms. Default value is 240. + + rockchip,phy_lpddr3_ca_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the PHY side CA line + (including command line, address line and clock line) drive strength. + Default value is 40. + + rockchip,phy_lpddr3_dq_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. Default value is 40. + + rockchip,phy_lpddr3_odt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When dram type is LPDDR3, this parameter define the phy side odt + strength, default value is 240. + + rockchip,lpddr4_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the ODT disable + frequency in MHz (Mega Hz). When the DDR frequency is less then + ddr3_odt_dis_freq, the ODT on the DRAM side and controller side are both + disabled. + + rockchip,lpddr4_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side drive + strength in ohms. Default value is 60. + + rockchip,lpddr4_dq_odt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on + DQS/DQ line strength in ohms. Default value is 40. + + rockchip,lpddr4_ca_odt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on + CA line strength in ohms. Default value is 40. + + rockchip,phy_lpddr4_ca_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side CA line + (including command address line) drive strength. Default value is 40. + + rockchip,phy_lpddr4_ck_cs_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side clock + line and CS line drive strength. Default value is 80. + + rockchip,phy_lpddr4_dq_drv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. Default value is 80. + + rockchip,phy_lpddr4_odt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side ODT + strength. Default value is 60. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + dmc: dmc { + compatible = "rockchip,rk3399-dmc"; + devfreq-events = <&dfi>; + rockchip,pmu = <&pmu>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_DDRC>; + clock-names = "dmc_clk"; + operating-points-v2 = <&dmc_opp_table>; + center-supply = <&ppvar_centerlogic>; + rockchip,ddr3_speed_bin = <21>; + rockchip,pd_idle = <0x40>; + rockchip,sr_idle = <0x2>; + rockchip,sr_mc_gate_idle = <0x3>; + rockchip,srpd_lite_idle = <0x4>; + rockchip,standby_idle = <0x2000>; + rockchip,dram_dll_dis_freq = <300>; + rockchip,phy_dll_dis_freq = <125>; + rockchip,auto_pd_dis_freq = <666>; + rockchip,ddr3_odt_dis_freq = <333>; + rockchip,ddr3_drv = <40>; + rockchip,ddr3_odt = <120>; + rockchip,phy_ddr3_ca_drv = <40>; + rockchip,phy_ddr3_dq_drv = <40>; + rockchip,phy_ddr3_odt = <240>; + rockchip,lpddr3_odt_dis_freq = <333>; + rockchip,lpddr3_drv = <34>; + rockchip,lpddr3_odt = <240>; + rockchip,phy_lpddr3_ca_drv = <40>; + rockchip,phy_lpddr3_dq_drv = <40>; + rockchip,phy_lpddr3_odt = <240>; + rockchip,lpddr4_odt_dis_freq = <333>; + rockchip,lpddr4_drv = <60>; + rockchip,lpddr4_dq_odt = <40>; + rockchip,lpddr4_ca_odt = <40>; + rockchip,phy_lpddr4_ca_drv = <40>; + rockchip,phy_lpddr4_ck_cs_drv = <80>; + rockchip,phy_lpddr4_dq_drv = <80>; + rockchip,phy_lpddr4_odt = <60>; + };
I want to add, deprecate, and bugfix some properties, as well as add the first users. This is easier with a proper schema. The transformation is mostly straightforward, plus a few notable tweaks: * Renamed rockchip,dram_speed_bin to rockchip,ddr3_speed_bin. The driver code and the example matched, but the description was different. I went with the implementation. * Drop upthreshold and downdifferential properties from the example. These were undocumented (so, wouldn't pass validation), but were representing software properties (governor tweaks). I drop them from the driver in subsequent patches. * Rename clock from pclk_ddr_mon to dmc_clk. The driver, DT example, and all downstream users matched -- the binding definition was the exception. Anyway, "dmc_clk" is a more appropriately generic name. Signed-off-by: Brian Norris <briannorris@chromium.org> --- .../bindings/devfreq/rk3399_dmc.txt | 212 ------------- .../bindings/devfreq/rk3399_dmc.yaml | 297 ++++++++++++++++++ 2 files changed, 297 insertions(+), 212 deletions(-) delete mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.yaml