| Message ID | 20220112181113.875567-2-robert.hancock@calian.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Cadence MACB/GEM support for ZynqMP SGMII | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/fixes_present | success | Fixes tag not required for -next series |
| netdev/subject_prefix | success | Link |
| netdev/cover_letter | success | Series has a cover letter |
| netdev/patch_count | success | Link |
| netdev/header_inline | success | No static functions without inline keyword in header files |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/cc_maintainers | success | CCed 5 of 5 maintainers |
| netdev/build_clang | success | Errors and warnings before: 0 this patch: 0 |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Signed-off-by tag matches author and committer |
| netdev/verify_fixes | success | No Fixes tag |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 42 lines checked |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/source_inline | success | Was 0 now: 0 |
On 1/12/22 19:11, Robert Hancock wrote: > Updated macb DT binding documentation to reflect the phy-names, phys, > resets, reset-names properties which are now used with ZynqMP GEM > devices, and added a ZynqMP-specific DT example. > > Signed-off-by: Robert Hancock <robert.hancock@calian.com> > --- > .../devicetree/bindings/net/macb.txt | 33 +++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt > index a1b06fd1962e..e526952145b8 100644 > --- a/Documentation/devicetree/bindings/net/macb.txt > +++ b/Documentation/devicetree/bindings/net/macb.txt > @@ -29,6 +29,12 @@ Required properties: > Optional elements: 'rx_clk' applies to cdns,zynqmp-gem > Optional elements: 'tsu_clk' > - clocks: Phandles to input clocks. > +- phy_names, phys: Required with ZynqMP SoC when in SGMII mode. > + phy_names should be "sgmii-phy" and phys should > + reference PS-GTR generic PHY device for this controller > + instance. See ZynqMP example below. > +- resets, reset-names: Recommended with ZynqMP, specify reset control for this > + controller instance with zynqmp-reset driver. > > Optional properties: > - mdio: node containing PHY children. If this node is not present, then PHYs > @@ -58,3 +64,30 @@ Examples: > reset-gpios = <&pioE 6 1>; > }; > }; > + > + gem1: ethernet@ff0c0000 { > + compatible = "cdns,zynqmp-gem", "cdns,gem"; > + interrupt-parent = <&gic>; > + interrupts = <0 59 4>, <0 59 4>; > + reg = <0x0 0xff0c0000 0x0 0x1000>; > + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, > + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, > + <&zynqmp_clk GEM_TSU>; > + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; > + #address-cells = <1>; > + #size-cells = <0>; > + #stream-id-cells = <1>; > + iommus = <&smmu 0x875>; > + power-domains = <&zynqmp_firmware PD_ETH_1>; > + resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; > + reset-names = "gem1_rst"; > + status = "okay"; > + phy-mode = "sgmii"; > + phy-names = "sgmii-phy"; > + phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; > + fixed-link { > + speed = <1000>; > + full-duplex; > + pause; > + }; > + }; Geert already converted this file to yaml that's why you should target this version. Thanks, Michal
On Thu, 2022-01-13 at 08:25 +0100, Michal Simek wrote: > > On 1/12/22 19:11, Robert Hancock wrote: > > Updated macb DT binding documentation to reflect the phy-names, phys, > > resets, reset-names properties which are now used with ZynqMP GEM > > devices, and added a ZynqMP-specific DT example. > > > > Signed-off-by: Robert Hancock <robert.hancock@calian.com> > > --- > > .../devicetree/bindings/net/macb.txt | 33 +++++++++++++++++++ > > 1 file changed, 33 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/net/macb.txt > > b/Documentation/devicetree/bindings/net/macb.txt > > index a1b06fd1962e..e526952145b8 100644 > > --- a/Documentation/devicetree/bindings/net/macb.txt > > +++ b/Documentation/devicetree/bindings/net/macb.txt > > @@ -29,6 +29,12 @@ Required properties: > > Optional elements: 'rx_clk' applies to cdns,zynqmp-gem > > Optional elements: 'tsu_clk' > > - clocks: Phandles to input clocks. > > +- phy_names, phys: Required with ZynqMP SoC when in SGMII mode. > > + phy_names should be "sgmii-phy" and phys should > > + reference PS-GTR generic PHY device for this controller > > + instance. See ZynqMP example below. > > +- resets, reset-names: Recommended with ZynqMP, specify reset control for > > this > > + controller instance with zynqmp-reset driver. > > > > Optional properties: > > - mdio: node containing PHY children. If this node is not present, then > > PHYs > > @@ -58,3 +64,30 @@ Examples: > > reset-gpios = <&pioE 6 1>; > > }; > > }; > > + > > + gem1: ethernet@ff0c0000 { > > + compatible = "cdns,zynqmp-gem", "cdns,gem"; > > + interrupt-parent = <&gic>; > > + interrupts = <0 59 4>, <0 59 4>; > > + reg = <0x0 0xff0c0000 0x0 0x1000>; > > + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, > > + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, > > + <&zynqmp_clk GEM_TSU>; > > + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + #stream-id-cells = <1>; > > + iommus = <&smmu 0x875>; > > + power-domains = <&zynqmp_firmware PD_ETH_1>; > > + resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; > > + reset-names = "gem1_rst"; > > + status = "okay"; > > + phy-mode = "sgmii"; > > + phy-names = "sgmii-phy"; > > + phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; > > + fixed-link { > > + speed = <1000>; > > + full-duplex; > > + pause; > > + }; > > + }; > > Geert already converted this file to yaml that's why you should target this > version. Is that version in a tree somewhere that can be patched against? > > Thanks, > Michal
Hi Robert, On Thu, Jan 13, 2022 at 5:34 PM Robert Hancock <robert.hancock@calian.com> wrote: > On Thu, 2022-01-13 at 08:25 +0100, Michal Simek wrote: > > On 1/12/22 19:11, Robert Hancock wrote: > > > Updated macb DT binding documentation to reflect the phy-names, phys, > > > resets, reset-names properties which are now used with ZynqMP GEM > > > devices, and added a ZynqMP-specific DT example. > > > > > > Signed-off-by: Robert Hancock <robert.hancock@calian.com> > > > --- a/Documentation/devicetree/bindings/net/macb.txt > > > +++ b/Documentation/devicetree/bindings/net/macb.txt > > Geert already converted this file to yaml that's why you should target this > > version. > > Is that version in a tree somewhere that can be patched against? It has just entered upstream, and will be part of v5.17-rc1: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4e5b6de1f46d0ea0 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On Thu, 2022-01-13 at 18:43 +0100, Geert Uytterhoeven wrote: > Hi Robert, > > On Thu, Jan 13, 2022 at 5:34 PM Robert Hancock > <robert.hancock@calian.com> wrote: > > On Thu, 2022-01-13 at 08:25 +0100, Michal Simek wrote: > > > On 1/12/22 19:11, Robert Hancock wrote: > > > > Updated macb DT binding documentation to reflect the phy-names, phys, > > > > resets, reset-names properties which are now used with ZynqMP GEM > > > > devices, and added a ZynqMP-specific DT example. > > > > > > > > Signed-off-by: Robert Hancock <robert.hancock@calian.com> > > > > --- a/Documentation/devicetree/bindings/net/macb.txt > > > > +++ b/Documentation/devicetree/bindings/net/macb.txt > > > Geert already converted this file to yaml that's why you should target > > > this > > > version. > > > > Is that version in a tree somewhere that can be patched against? > > It has just entered upstream, and will be part of v5.17-rc1: > https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4e5b6de1f46d0ea0__;!!IOGos0k!yRbmcDEaC2OgoZAK9hyg-FUIkIcYg6JKqNF7y0Tyw-fbnXvKAIRsccN9K5iGDZkhTko$ > Ah, I see, it went in through the devicetree tree so it's not in net-next yet. Should be able to pick that change up once the merge window closes and update the patch accordingly. > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- > geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like > that. > -- Linus Torvalds
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index a1b06fd1962e..e526952145b8 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -29,6 +29,12 @@ Required properties: Optional elements: 'rx_clk' applies to cdns,zynqmp-gem Optional elements: 'tsu_clk' - clocks: Phandles to input clocks. +- phy_names, phys: Required with ZynqMP SoC when in SGMII mode. + phy_names should be "sgmii-phy" and phys should + reference PS-GTR generic PHY device for this controller + instance. See ZynqMP example below. +- resets, reset-names: Recommended with ZynqMP, specify reset control for this + controller instance with zynqmp-reset driver. Optional properties: - mdio: node containing PHY children. If this node is not present, then PHYs @@ -58,3 +64,30 @@ Examples: reset-gpios = <&pioE 6 1>; }; }; + + gem1: ethernet@ff0c0000 { + compatible = "cdns,zynqmp-gem", "cdns,gem"; + interrupt-parent = <&gic>; + interrupts = <0 59 4>, <0 59 4>; + reg = <0x0 0xff0c0000 0x0 0x1000>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; + #address-cells = <1>; + #size-cells = <0>; + #stream-id-cells = <1>; + iommus = <&smmu 0x875>; + power-domains = <&zynqmp_firmware PD_ETH_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; + reset-names = "gem1_rst"; + status = "okay"; + phy-mode = "sgmii"; + phy-names = "sgmii-phy"; + phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + };
Updated macb DT binding documentation to reflect the phy-names, phys, resets, reset-names properties which are now used with ZynqMP GEM devices, and added a ZynqMP-specific DT example. Signed-off-by: Robert Hancock <robert.hancock@calian.com> --- .../devicetree/bindings/net/macb.txt | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+)