@@ -4,13 +4,13 @@
$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode
maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
description: |
- On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
+ On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module
Standby Mode share the same register block.
They provide the following functionalities:
@@ -22,7 +22,9 @@ description: |
properties:
compatible:
- const: renesas,r9a07g044-cpg # RZ/G2{L,LC}
+ enum:
+ - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+ - renesas,r9a07g054-cpg # RZ/V2L
reg:
maxItems: 1
@@ -40,9 +42,9 @@ properties:
description: |
- For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
and a core clock reference, as defined in
- <dt-bindings/clock/r9a07g044-cpg.h>
+ <dt-bindings/clock/r9a07g*-cpg.h>
- For module clocks, the two clock specifier cells must be "CPG_MOD" and
- a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+ a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>.
const: 2
'#power-domain-cells':
@@ -56,7 +58,7 @@ properties:
'#reset-cells':
description:
The single reset specifier cell must be the module number, as defined in
- the <dt-bindings/clock/r9a07g044-cpg.h>.
+ the <dt-bindings/clock/r9a07g0*-cpg.h>.
const: 1
required: