@@ -217,6 +217,116 @@ bool tb_lc_is_clx_supported(struct tb_port *port)
return !!(val & TB_LC_LINK_ATTR_CPS);
}
+/**
+ * tb_lc_is_usb_plugged() - Is there USB device connected to port
+ * @port: Device router lane 0 adapter
+ *
+ * Returns true if the @port has USB type-C device connected.
+ */
+bool tb_lc_is_usb_plugged(struct tb_port *port)
+{
+ struct tb_switch *sw = port->sw;
+ int cap, ret;
+ u32 val;
+
+ if (sw->generation != 3)
+ return false;
+
+ cap = find_port_lc_cap(port);
+ if (cap < 0)
+ return false;
+
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, cap + TB_LC_CS_42, 1);
+ if (ret)
+ return false;
+
+ return !!(val & TB_LC_CS_42_USB_PLUGGED);
+}
+
+/**
+ * tb_lc_is_xhci_connected() - Is the internal xHCI connected
+ * @port: Device router lane 0 adapter
+ *
+ * Returns true if the internal xHCI has been connected to @port.
+ */
+bool tb_lc_is_xhci_connected(struct tb_port *port)
+{
+ struct tb_switch *sw = port->sw;
+ int cap, ret;
+ u32 val;
+
+ if (sw->generation != 3)
+ return false;
+
+ cap = find_port_lc_cap(port);
+ if (cap < 0)
+ return false;
+
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, cap + TB_LC_LINK_REQ, 1);
+ if (ret)
+ return false;
+
+ return !!(val & TB_LC_LINK_REQ_XHCI_CONNECT);
+}
+
+static int __tb_lc_xhci_connect(struct tb_port *port, bool connect)
+{
+ struct tb_switch *sw = port->sw;
+ int cap, ret;
+ u32 val;
+
+ if (sw->generation != 3)
+ return -EINVAL;
+
+ cap = find_port_lc_cap(port);
+ if (cap < 0)
+ return cap;
+
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, cap + TB_LC_LINK_REQ, 1);
+ if (ret)
+ return ret;
+
+ if (connect)
+ val |= TB_LC_LINK_REQ_XHCI_CONNECT;
+ else
+ val &= ~TB_LC_LINK_REQ_XHCI_CONNECT;
+
+ return tb_sw_write(sw, &val, TB_CFG_SWITCH, cap + TB_LC_LINK_REQ, 1);
+}
+
+/**
+ * tb_lc_xhci_connect() - Connect internal xHCI
+ * @port: Device router lane 0 adapter
+ *
+ * Tells LC to connect the internal xHCI to @port. Returns %0 in success
+ * and negative errno in case of failure. Can be called for Thunderbolt 3
+ * routers only.
+ */
+int tb_lc_xhci_connect(struct tb_port *port)
+{
+ int ret;
+
+ ret = __tb_lc_xhci_connect(port, true);
+ if (ret)
+ return ret;
+
+ tb_port_dbg(port, "xHCI connected\n");
+ return 0;
+}
+
+/**
+ * tb_lc_xhci_disconnect() - Disconnect internal xHCI
+ * @port: Device router lane 0 adapter
+ *
+ * Tells LC to disconnect the internal xHCI from @port. Can be called
+ * for Thunderbolt 3 routers only.
+ */
+void tb_lc_xhci_disconnect(struct tb_port *port)
+{
+ __tb_lc_xhci_connect(port, false);
+ tb_port_dbg(port, "xHCI disconnected\n");
+}
+
static int tb_lc_set_wake_one(struct tb_switch *sw, unsigned int offset,
unsigned int flags)
{
@@ -1528,7 +1528,13 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active)
case PCI_DEVICE_ID_INTEL_PORT_RIDGE:
break;
default:
- data |= 4;
+ /*
+ * Skip Alpine Ridge, it needs to have vendor
+ * specific USB hotplug event enabled for the
+ * internal xHCI to work.
+ */
+ if (!tb_switch_is_alpine_ridge(sw))
+ data |= TB_PLUG_EVENTS_USB_DISABLE;
}
} else {
data = data | 0x7c;
@@ -3689,3 +3695,66 @@ int tb_switch_pcie_l1_enable(struct tb_switch *sw)
/* Write to Upstream PCIe bridge #0 aka Up0 */
return tb_switch_pcie_bridge_write(sw, 0, 0x143, 0x0c5806b1);
}
+
+/**
+ * tb_switch_xhci_connect() - Connect internal xHCI
+ * @sw: Router whose xHCI to connect
+ *
+ * Can be called to any router. For Alpine Ridge and Titan Ridge
+ * performs special flows that bring the xHCI functional for any device
+ * connected to the type-C port. Call only after PCIe tunnel has been
+ * established. The function only does the connect if not done already
+ * so can be called several times for the same router.
+ */
+int tb_switch_xhci_connect(struct tb_switch *sw)
+{
+ bool usb_port1, usb_port3, xhci_port1, xhci_port3;
+ struct tb_port *port1, *port3;
+ int ret;
+
+ port1 = &sw->ports[1];
+ port3 = &sw->ports[3];
+
+ if (tb_switch_is_alpine_ridge(sw)) {
+ usb_port1 = tb_lc_is_usb_plugged(port1);
+ usb_port3 = tb_lc_is_usb_plugged(port3);
+ xhci_port1 = tb_lc_is_xhci_connected(port1);
+ xhci_port3 = tb_lc_is_xhci_connected(port3);
+
+ /* Figure out correct USB port to connect */
+ if (usb_port1 && !xhci_port1) {
+ ret = tb_lc_xhci_connect(port1);
+ if (ret)
+ return ret;
+ }
+ if (usb_port3 && !xhci_port3)
+ return tb_lc_xhci_connect(port3);
+ } else if (tb_switch_is_titan_ridge(sw)) {
+ ret = tb_lc_xhci_connect(port1);
+ if (ret)
+ return ret;
+ return tb_lc_xhci_connect(port3);
+ }
+
+ return 0;
+}
+
+/**
+ * tb_switch_xhci_disconnect() - Disconnect internal xHCI
+ * @sw: Router whose xHCI to disconnect
+ *
+ * The opposite of tb_switch_xhci_connect(). Disconnects xHCI on both
+ * ports.
+ */
+void tb_switch_xhci_disconnect(struct tb_switch *sw)
+{
+ if (sw->generation == 3) {
+ struct tb_port *port1 = &sw->ports[1];
+ struct tb_port *port3 = &sw->ports[3];
+
+ tb_lc_xhci_disconnect(port1);
+ tb_port_dbg(port1, "disconnected xHCI\n");
+ tb_lc_xhci_disconnect(port3);
+ tb_port_dbg(port3, "disconnected xHCI\n");
+ }
+}
@@ -1054,6 +1054,8 @@ static int tb_disconnect_pci(struct tb *tb, struct tb_switch *sw)
if (WARN_ON(!tunnel))
return -ENODEV;
+ tb_switch_xhci_disconnect(sw);
+
tb_tunnel_deactivate(tunnel);
list_del(&tunnel->list);
tb_tunnel_free(tunnel);
@@ -1099,6 +1101,9 @@ static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw)
if (tb_switch_pcie_l1_enable(sw))
tb_sw_warn(sw, "failed to enable PCIe L1 for Titan Ridge\n");
+ if (tb_switch_xhci_connect(sw))
+ tb_sw_warn(sw, "failed to connect xHCI\n");
+
list_add_tail(&tunnel->list, &tcm->tunnel_list);
return 0;
}
@@ -1256,12 +1261,18 @@ static void tb_handle_hotplug(struct work_struct *work)
tb_port_unconfigure_xdomain(port);
} else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) {
tb_dp_resource_unavailable(tb, port);
+ } else if (!port->port) {
+ tb_sw_dbg(sw, "xHCI disconnect request\n");
+ tb_switch_xhci_disconnect(sw);
} else {
tb_port_dbg(port,
"got unplug event for disconnected port, ignoring\n");
}
} else if (port->remote) {
tb_port_dbg(port, "got plug event for connected port, ignoring\n");
+ } else if (!port->port && sw->authorized) {
+ tb_sw_dbg(sw, "xHCI connect request\n");
+ tb_switch_xhci_connect(sw);
} else {
if (tb_port_is_null(port)) {
tb_port_dbg(port, "hotplug: scanning\n");
@@ -988,6 +988,9 @@ int tb_switch_mask_clx_objections(struct tb_switch *sw);
int tb_switch_pcie_l1_enable(struct tb_switch *sw);
+int tb_switch_xhci_connect(struct tb_switch *sw);
+void tb_switch_xhci_disconnect(struct tb_switch *sw);
+
int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged);
int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_clear_counter(struct tb_port *port, int counter);
@@ -1082,6 +1085,10 @@ int tb_lc_configure_xdomain(struct tb_port *port);
void tb_lc_unconfigure_xdomain(struct tb_port *port);
int tb_lc_start_lane_initialization(struct tb_port *port);
bool tb_lc_is_clx_supported(struct tb_port *port);
+bool tb_lc_is_usb_plugged(struct tb_port *port);
+bool tb_lc_is_xhci_connected(struct tb_port *port);
+int tb_lc_xhci_connect(struct tb_port *port);
+void tb_lc_xhci_disconnect(struct tb_port *port);
int tb_lc_set_wake(struct tb_switch *sw, unsigned int flags);
int tb_lc_set_sleep(struct tb_switch *sw);
bool tb_lc_lane_bonding_possible(struct tb_switch *sw);
@@ -462,6 +462,8 @@ struct tb_regs_hop {
#define TMU_ADP_CS_6_DISABLE_TMU_OBJ_CL2 BIT(3)
/* Plug Events registers */
+#define TB_PLUG_EVENTS_USB_DISABLE BIT(2)
+
#define TB_PLUG_EVENTS_PCIE_WR_DATA 0x1b
#define TB_PLUG_EVENTS_PCIE_CMD 0x1c
#define TB_PLUG_EVENTS_PCIE_CMD_DW_OFFSET_MASK GENMASK(9, 0)
@@ -501,6 +503,9 @@ struct tb_regs_hop {
#define TB_LC_POWER 0x740
/* Link controller registers */
+#define TB_LC_CS_42 0x2a
+#define TB_LC_CS_42_USB_PLUGGED BIT(31)
+
#define TB_LC_PORT_ATTR 0x8d
#define TB_LC_PORT_ATTR_BE BIT(12)
@@ -521,4 +526,7 @@ struct tb_regs_hop {
#define TB_LC_LINK_ATTR 0x97
#define TB_LC_LINK_ATTR_CPS BIT(18)
+#define TB_LC_LINK_REQ 0xad
+#define TB_LC_LINK_REQ_XHCI_CONNECT BIT(31)
+
#endif
Both Alpine Ridge and Titan Ridge require special flows in order to activate the internal xHCI controller when there is USB device connected to the downstream type-C port. This implements the missing flows for both. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- drivers/thunderbolt/lc.c | 110 ++++++++++++++++++++++++++++++++++ drivers/thunderbolt/switch.c | 71 +++++++++++++++++++++- drivers/thunderbolt/tb.c | 11 ++++ drivers/thunderbolt/tb.h | 7 +++ drivers/thunderbolt/tb_regs.h | 8 +++ 5 files changed, 206 insertions(+), 1 deletion(-)