Message ID | 20220124082803.94286-2-francesco.dolcini@toradex.com (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | viresh kumar |
Headers | show |
Series | Enable i.MX7 SOLO temperature sensor | expand |
Hi Francesco, On Mon, Jan 24, 2022 at 5:28 AM Francesco Dolcini <francesco.dolcini@toradex.com> wrote: > > From: Denys Drozdov <denys.drozdov@toradex.com> > > Processor operating points for imx7s.dtsi should be properly defined to > perform correct imx-cpufreq-dt probe and registration and provide an > access to the temperature sensors using the i.MX thermal driver. > > Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 52a9aeecdbb2..5af6d58666f4 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -76,6 +76,22 @@ cpu0: cpu@0 { clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX7D_CLK_ARM>; cpu-idle-states = <&cpu_sleep_wait>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + nvmem-cells = <&fuse_grade>; + nvmem-cell-names = "speed_grade"; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xf>, <0xf>; }; };