new file mode 100644
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Bus controller for MediaTek ARM SoCs
+
+maintainers:
+ - Leilk Liu <leilk.liu@mediatek.com>
+
+allOf:
+ - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt7629-spi
+ - const: mediatek,mt7622-spi
+ - items:
+ - enum:
+ - mediatek,mt8516-spi
+ - const: mediatek,mt2712-spi
+ - items:
+ - enum:
+ - mediatek,mt6779-spi
+ - mediatek,mt8192-spi
+ - mediatek,mt8195-spi
+ - const: mediatek,mt6765-spi
+ - items:
+ - enum:
+ - mediatek,mt2701-spi
+ - mediatek,mt2712-spi
+ - mediatek,mt6589-spi
+ - mediatek,mt6765-spi
+ - mediatek,mt6893-spi
+ - mediatek,mt7622-spi
+ - mediatek,mt8135-spi
+ - mediatek,mt8173-spi
+ - mediatek,mt8183-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: clock used for the parent clock
+ - description: clock used for the muxes clock
+ - description: clock used for the clock gate
+
+ clock-names:
+ items:
+ - const: parent-clk
+ - const: sel-clk
+ - const: spi-clk
+
+ mediatek,pad-select:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 4
+ items:
+ enum: [0, 1, 2, 3]
+ description:
+ specify which pins group(ck/mi/mo/cs) spi controller used.
+ This is an array.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - '#address-cells'
+ - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi@1100a000 {
+ compatible = "mediatek,mt8173-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1100a000 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+ mediatek,pad-select = <1>, <0>;
+ };
deleted file mode 100644
@@ -1,68 +0,0 @@
-Binding for MTK SPI controller
-
-Required properties:
-- compatible: should be one of the following.
- - mediatek,mt2701-spi: for mt2701 platforms
- - mediatek,mt2712-spi: for mt2712 platforms
- - mediatek,mt6589-spi: for mt6589 platforms
- - mediatek,mt6765-spi: for mt6765 platforms
- - mediatek,mt7622-spi: for mt7622 platforms
- - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms
- - mediatek,mt8135-spi: for mt8135 platforms
- - mediatek,mt8173-spi: for mt8173 platforms
- - mediatek,mt8183-spi: for mt8183 platforms
- - mediatek,mt6893-spi: for mt6893 platforms
- - "mediatek,mt8192-spi", "mediatek,mt6765-spi": for mt8192 platforms
- - "mediatek,mt8195-spi", "mediatek,mt6765-spi": for mt8195 platforms
- - "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms
- - "mediatek,mt6779-spi", "mediatek,mt6765-spi": for mt6779 platforms
-
-- #address-cells: should be 1.
-
-- #size-cells: should be 0.
-
-- reg: Address and length of the register set for the device
-
-- interrupts: Should contain spi interrupt
-
-- clocks: phandles to input clocks.
- The first should be one of the following. It's PLL.
- - <&clk26m>: specify parent clock 26MHZ.
- - <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
- It's the default one.
- - <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
- - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
- - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
- The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux.
- The third is <&pericfg CLK_PERI_SPI0>. It's clock gate.
-
-- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the
- muxes clock, and "spi-clk" for the clock gate.
-
-Optional properties:
--cs-gpios: see spi-bus.txt.
-
-- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
- controller used. This is an array, the element value should be 0~3,
- only required for MT8173.
- 0: specify GPIO69,70,71,72 for spi pins.
- 1: specify GPIO102,103,104,105 for spi pins.
- 2: specify GPIO128,129,130,131 for spi pins.
- 3: specify GPIO5,6,7,8 for spi pins.
-
-Example:
-
-- SoC Specific Portion:
-spi: spi@1100a000 {
- compatible = "mediatek,mt8173-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x1100a000 0 0x1000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
- <&topckgen CLK_TOP_SPI_SEL>,
- <&pericfg CLK_PERI_SPI0>;
- clock-names = "parent-clk", "sel-clk", "spi-clk";
- cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
- mediatek,pad-select = <1>, <0>;
-};
Convert Mediatek ARM SOC's SPI Master controller binding to json-schema format. Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> --- .../bindings/spi/mediatek,spi-mt65xx.yaml | 101 ++++++++++++++++++ .../devicetree/bindings/spi/spi-mt65xx.txt | 68 ------------ 2 files changed, 101 insertions(+), 68 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-mt65xx.txt