| Message ID | 20220118203833.316741-1-eric.auger@redhat.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | qtests/libqos: Allow PCI tests to be run with virt-machine | expand |
On Tue, Jan 18, 2022 at 09:38:27PM +0100, Eric Auger wrote: > Up to now the virt-machine node only contains a virtio-mmio > driver node but no driver that eventually produces any pci-bus > interface. > > Hence, PCI libqos tests cannot be run with aarch64 binary. > > This series brings the pieces needed to be able to run PCI tests > with the aarch64 binary: a generic-pcihost driver node gets > instantiated by the machine. This later contains a pci-bus-generic > driver which produces a pci-bus interface. Then all tests > consuming the pci-bus interface can be run with the libqos arm > virt machine. > > One of the first goal was to be able to run the virtio-iommu-pci > tests as the virtio-iommu was initially targetting ARM and it > was awkard to be run the test with the pc machine. This is now > possible. > > Only the tests doing hotplug cannot be run yet as hotplug is > not possible on the root bus. This will be dealt with separately > by adding a root port to the object tree. > > Best Regards > > Eric > > This series can be found at: > https://github.com/eauger/qemu/tree/libqos-pci-arm-v2 > > History I dropped this due to make check failures. Pls make sure to make and test all targets. Thanks! > v1 -> v2: > - copyright updated to 2022 > - QPCIBusARM renamed into QGenericPCIBus > - QGenericPCIHost declarations and definitions moved in the same > place as the generic pci implementation > - rename pci-arm.c/h in generic-pcihost.c/h and remove any ref to > ARM there > - remove qos_node_produces_opts, qpci_new_arm, qpci_free_arm > - ecam_alloc_ptr now is a field of QGenericPCIBus and not QPCIBus > - new libqos_init to create generic-pcihost driver that contains > pci-bus-generic > - QGenericPCIHost moved in the same place as the generic pci > bindings > - collected Thomas A-b/R-b > > > Eric Auger (6): > tests/qtest/vhost-user-test.c: Use vhostforce=on > tests/qtest/libqos/pci: Introduce pio_limit > tests/qtest/libqos: Skip hotplug tests if pci root bus is not > hotpluggable > tests/qtest/vhost-user-blk-test: Setup MSIx to avoid error on aarch64 > tests/qtest/vhost-user-blk-test: Factorize vq setup code > tests/qtest/libqos: Add generic pci host bridge in arm-virt machine > > tests/qtest/e1000e-test.c | 6 + > tests/qtest/libqos/arm-virt-machine.c | 18 +- > tests/qtest/libqos/generic-pcihost.c | 231 ++++++++++++++++++++++++++ > tests/qtest/libqos/generic-pcihost.h | 54 ++++++ > tests/qtest/libqos/meson.build | 1 + > tests/qtest/libqos/pci-pc.c | 1 + > tests/qtest/libqos/pci-spapr.c | 1 + > tests/qtest/libqos/pci.c | 78 +++++---- > tests/qtest/libqos/pci.h | 6 +- > tests/qtest/vhost-user-blk-test.c | 39 ++++- > tests/qtest/vhost-user-test.c | 2 +- > tests/qtest/virtio-blk-test.c | 5 + > tests/qtest/virtio-net-test.c | 5 + > tests/qtest/virtio-rng-test.c | 5 + > 14 files changed, 408 insertions(+), 44 deletions(-) > create mode 100644 tests/qtest/libqos/generic-pcihost.c > create mode 100644 tests/qtest/libqos/generic-pcihost.h > > -- > 2.26.3
Hi Michael, On 2/5/22 2:43 AM, Michael S. Tsirkin wrote: > On Tue, Jan 18, 2022 at 09:38:27PM +0100, Eric Auger wrote: >> Up to now the virt-machine node only contains a virtio-mmio >> driver node but no driver that eventually produces any pci-bus >> interface. >> >> Hence, PCI libqos tests cannot be run with aarch64 binary. >> >> This series brings the pieces needed to be able to run PCI tests >> with the aarch64 binary: a generic-pcihost driver node gets >> instantiated by the machine. This later contains a pci-bus-generic >> driver which produces a pci-bus interface. Then all tests >> consuming the pci-bus interface can be run with the libqos arm >> virt machine. >> >> One of the first goal was to be able to run the virtio-iommu-pci >> tests as the virtio-iommu was initially targetting ARM and it >> was awkard to be run the test with the pc machine. This is now >> possible. >> >> Only the tests doing hotplug cannot be run yet as hotplug is >> not possible on the root bus. This will be dealt with separately >> by adding a root port to the object tree. >> >> Best Regards >> >> Eric >> >> This series can be found at: >> https://github.com/eauger/qemu/tree/libqos-pci-arm-v2 >> >> History > > I dropped this due to make check failures. Pls make sure > to make and test all targets. Thanks! Sorry for the inconvenience. qos-test now is failing on aarch64 and definitively it was passing when I submitted the patches (ie. with above branch). I bisected and d9afe24c29a0 ("hw/arm/virt: Disable highmem devices that don't fit in the PA range") recenly applied upstream changed the way the test behave and now is causing /aarch64/virt/generic-pcihost/pci-bus-generic/pci-bus/megasas/megasas-tests/dcmd/pd-get-info/fuzz to fail. This is due to the fact GPA is limited to 32b and the device seems to require high ECAM. I will fix that. Thanks Eric > >> v1 -> v2: >> - copyright updated to 2022 >> - QPCIBusARM renamed into QGenericPCIBus >> - QGenericPCIHost declarations and definitions moved in the same >> place as the generic pci implementation >> - rename pci-arm.c/h in generic-pcihost.c/h and remove any ref to >> ARM there >> - remove qos_node_produces_opts, qpci_new_arm, qpci_free_arm >> - ecam_alloc_ptr now is a field of QGenericPCIBus and not QPCIBus >> - new libqos_init to create generic-pcihost driver that contains >> pci-bus-generic >> - QGenericPCIHost moved in the same place as the generic pci >> bindings >> - collected Thomas A-b/R-b >> >> >> Eric Auger (6): >> tests/qtest/vhost-user-test.c: Use vhostforce=on >> tests/qtest/libqos/pci: Introduce pio_limit >> tests/qtest/libqos: Skip hotplug tests if pci root bus is not >> hotpluggable >> tests/qtest/vhost-user-blk-test: Setup MSIx to avoid error on aarch64 >> tests/qtest/vhost-user-blk-test: Factorize vq setup code >> tests/qtest/libqos: Add generic pci host bridge in arm-virt machine >> >> tests/qtest/e1000e-test.c | 6 + >> tests/qtest/libqos/arm-virt-machine.c | 18 +- >> tests/qtest/libqos/generic-pcihost.c | 231 ++++++++++++++++++++++++++ >> tests/qtest/libqos/generic-pcihost.h | 54 ++++++ >> tests/qtest/libqos/meson.build | 1 + >> tests/qtest/libqos/pci-pc.c | 1 + >> tests/qtest/libqos/pci-spapr.c | 1 + >> tests/qtest/libqos/pci.c | 78 +++++---- >> tests/qtest/libqos/pci.h | 6 +- >> tests/qtest/vhost-user-blk-test.c | 39 ++++- >> tests/qtest/vhost-user-test.c | 2 +- >> tests/qtest/virtio-blk-test.c | 5 + >> tests/qtest/virtio-net-test.c | 5 + >> tests/qtest/virtio-rng-test.c | 5 + >> 14 files changed, 408 insertions(+), 44 deletions(-) >> create mode 100644 tests/qtest/libqos/generic-pcihost.c >> create mode 100644 tests/qtest/libqos/generic-pcihost.h >> >> -- >> 2.26.3
Up to now the virt-machine node only contains a virtio-mmio driver node but no driver that eventually produces any pci-bus interface. Hence, PCI libqos tests cannot be run with aarch64 binary. This series brings the pieces needed to be able to run PCI tests with the aarch64 binary: a generic-pcihost driver node gets instantiated by the machine. This later contains a pci-bus-generic driver which produces a pci-bus interface. Then all tests consuming the pci-bus interface can be run with the libqos arm virt machine. One of the first goal was to be able to run the virtio-iommu-pci tests as the virtio-iommu was initially targetting ARM and it was awkard to be run the test with the pc machine. This is now possible. Only the tests doing hotplug cannot be run yet as hotplug is not possible on the root bus. This will be dealt with separately by adding a root port to the object tree. Best Regards Eric This series can be found at: https://github.com/eauger/qemu/tree/libqos-pci-arm-v2 History v1 -> v2: - copyright updated to 2022 - QPCIBusARM renamed into QGenericPCIBus - QGenericPCIHost declarations and definitions moved in the same place as the generic pci implementation - rename pci-arm.c/h in generic-pcihost.c/h and remove any ref to ARM there - remove qos_node_produces_opts, qpci_new_arm, qpci_free_arm - ecam_alloc_ptr now is a field of QGenericPCIBus and not QPCIBus - new libqos_init to create generic-pcihost driver that contains pci-bus-generic - QGenericPCIHost moved in the same place as the generic pci bindings - collected Thomas A-b/R-b Eric Auger (6): tests/qtest/vhost-user-test.c: Use vhostforce=on tests/qtest/libqos/pci: Introduce pio_limit tests/qtest/libqos: Skip hotplug tests if pci root bus is not hotpluggable tests/qtest/vhost-user-blk-test: Setup MSIx to avoid error on aarch64 tests/qtest/vhost-user-blk-test: Factorize vq setup code tests/qtest/libqos: Add generic pci host bridge in arm-virt machine tests/qtest/e1000e-test.c | 6 + tests/qtest/libqos/arm-virt-machine.c | 18 +- tests/qtest/libqos/generic-pcihost.c | 231 ++++++++++++++++++++++++++ tests/qtest/libqos/generic-pcihost.h | 54 ++++++ tests/qtest/libqos/meson.build | 1 + tests/qtest/libqos/pci-pc.c | 1 + tests/qtest/libqos/pci-spapr.c | 1 + tests/qtest/libqos/pci.c | 78 +++++---- tests/qtest/libqos/pci.h | 6 +- tests/qtest/vhost-user-blk-test.c | 39 ++++- tests/qtest/vhost-user-test.c | 2 +- tests/qtest/virtio-blk-test.c | 5 + tests/qtest/virtio-net-test.c | 5 + tests/qtest/virtio-rng-test.c | 5 + 14 files changed, 408 insertions(+), 44 deletions(-) create mode 100644 tests/qtest/libqos/generic-pcihost.c create mode 100644 tests/qtest/libqos/generic-pcihost.h