diff mbox series

[v2,6/6] usb: typec: mux: Add On Semi fsa4480 driver

Message ID 20220208031944.3444-7-bjorn.andersson@linaro.org (mailing list archive)
State Deferred, archived
Headers show
Series typec: mux: Introduce support for multiple TypeC muxes | expand

Commit Message

Bjorn Andersson Feb. 8, 2022, 3:19 a.m. UTC
The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
support for analog audio headsets. It allows sharing a common USB Type-C
port to pass USB2.0 signal, analog audio, sideband use wires and analog
microphone signal.

Due to lacking upstream audio support for testing, the audio muxing is
left untouched, but implementation of muxing the SBU lines is provided
as a pair of TypeC mux and switch devices. This provides the necessary
support for enabling the DisplayPort altmode on devices with this
circuit.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- None

 drivers/usb/typec/mux/Kconfig   |   9 ++
 drivers/usb/typec/mux/Makefile  |   1 +
 drivers/usb/typec/mux/fsa4480.c | 220 ++++++++++++++++++++++++++++++++
 3 files changed, 230 insertions(+)
 create mode 100644 drivers/usb/typec/mux/fsa4480.c

Comments

Andy Shevchenko Feb. 8, 2022, 1:24 p.m. UTC | #1
On Tue, Feb 8, 2022 at 1:26 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
> support for analog audio headsets. It allows sharing a common USB Type-C
> port to pass USB2.0 signal, analog audio, sideband use wires and analog
> microphone signal.
>
> Due to lacking upstream audio support for testing, the audio muxing is
> left untouched, but implementation of muxing the SBU lines is provided
> as a pair of TypeC mux and switch devices. This provides the necessary
> support for enabling the DisplayPort altmode on devices with this
> circuit.

...

> +config TYPEC_MUX_FSA4480
> +       tristate "ON Semi FSA4480 Analog Audio Switch driver"
> +       depends on I2C
> +       select REGMAP_I2C
> +       help
> +         Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which
> +         provides support for muxing analog audio and sideband signals on a
> +         common USB Type-C connector.

What would be the module name?

...

> +/*
> + * Copyright (C) 2021 Linaro Ltd.

2021-2022 ?

> + * Copyright (C) 2018-2020 The Linux Foundation
> + */

...

Missed mod_devicetable.h ?

...

> +#define FSA4480_ENABLE_DEVICE  BIT(7)
> +#define FSA4480_ENABLE_SBU     GENMASK(6, 5)
> +#define FSA4480_ENABLE_USB     GENMASK(4, 3)

Don't forget to include bits.h

...

> +       /* used to serialize concurrect change requests */

concurrent

...

> +static const struct regmap_config fsa4480_regmap_config = {
> +       .reg_bits = 8,
> +       .val_bits = 8,

> +       .max_register = FSA4480_RESET,

I would create a specific macro, to avoid confusion in case if there
will be more hw revisions with slightly different register layouts.

> +};


...

> +       fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config);
> +       if (IS_ERR(fsa->regmap)) {

> +               dev_err(dev, "failed to initialize regmap\n");
> +               return PTR_ERR(fsa->regmap);

return dev_err_probe();

> +       }

...

> +       fsa->sw = typec_switch_register(dev, &sw_desc);
> +       if (IS_ERR(fsa->sw)) {
> +               dev_err(dev, "failed to register typec switch: %ld\n", PTR_ERR(fsa->sw));
> +               return PTR_ERR(fsa->sw);

Ditto.

> +       }

...

> +       mux_desc.fwnode = dev->fwnode;

Please, avoid dereferencing fwnode, use dev_fwnode() instead.

...

> +       fsa->mux = typec_mux_register(dev, &mux_desc);
> +       if (IS_ERR(fsa->mux)) {
> +               typec_switch_unregister(fsa->sw);
> +               dev_err(dev, "failed to register typec mux: %ld\n", PTR_ERR(fsa->mux));
> +               return PTR_ERR(fsa->mux);

return dev_err_probe();

> +       }

...

> +static struct i2c_driver fsa4480_driver = {
> +       .driver = {
> +               .name = "fsa4480",
> +               .of_match_table = fsa4480_of_table,
> +       },
> +       .probe_new      = fsa4480_probe,
> +       .remove         = fsa4480_remove,
> +       .id_table       = fsa4480_table,
> +};

> +

Redundant blank line.

> +module_i2c_driver(fsa4480_driver);
diff mbox series

Patch

diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index edead555835e..5e20112c3f51 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -2,6 +2,15 @@ 
 
 menu "USB Type-C Multiplexer/DeMultiplexer Switch support"
 
+config TYPEC_MUX_FSA4480
+	tristate "ON Semi FSA4480 Analog Audio Switch driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which
+	  provides support for muxing analog audio and sideband signals on a
+	  common USB Type-C connector.
+
 config TYPEC_MUX_PI3USB30532
 	tristate "Pericom PI3USB30532 Type-C cross switch driver"
 	depends on I2C
diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
index 280a6f553115..e52a56c16bfb 100644
--- a/drivers/usb/typec/mux/Makefile
+++ b/drivers/usb/typec/mux/Makefile
@@ -1,4 +1,5 @@ 
 # SPDX-License-Identifier: GPL-2.0
 
+obj-$(CONFIG_TYPEC_MUX_FSA4480)		+= fsa4480.o
 obj-$(CONFIG_TYPEC_MUX_PI3USB30532)	+= pi3usb30532.o
 obj-$(CONFIG_TYPEC_MUX_INTEL_PMC)	+= intel_pmc_mux.o
diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
new file mode 100644
index 000000000000..ac2d8648db6a
--- /dev/null
+++ b/drivers/usb/typec/mux/fsa4480.c
@@ -0,0 +1,220 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Linaro Ltd.
+ * Copyright (C) 2018-2020 The Linux Foundation
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+#define FSA4480_SWITCH_ENABLE	0x04
+#define FSA4480_SWITCH_SELECT	0x05
+#define FSA4480_SWITCH_STATUS1	0x07
+#define FSA4480_SLOW_L		0x08
+#define FSA4480_SLOW_R		0x09
+#define FSA4480_SLOW_MIC	0x0a
+#define FSA4480_SLOW_SENSE	0x0b
+#define FSA4480_SLOW_GND	0x0c
+#define FSA4480_DELAY_L_R	0x0d
+#define FSA4480_DELAY_L_MIC	0x0e
+#define FSA4480_DELAY_L_SENSE	0x0f
+#define FSA4480_DELAY_L_AGND	0x10
+#define FSA4480_RESET		0x1e
+
+#define FSA4480_ENABLE_DEVICE	BIT(7)
+#define FSA4480_ENABLE_SBU	GENMASK(6, 5)
+#define FSA4480_ENABLE_USB	GENMASK(4, 3)
+
+#define FSA4480_SEL_SBU_REVERSE	GENMASK(6, 5)
+#define FSA4480_SEL_USB		GENMASK(4, 3)
+
+struct fsa4480 {
+	struct i2c_client *client;
+
+	/* used to serialize concurrect change requests */
+	struct mutex lock;
+
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
+
+	struct regmap *regmap;
+
+	u8 cur_enable;
+	u8 cur_select;
+};
+
+static const struct regmap_config fsa4480_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FSA4480_RESET,
+};
+
+static int fsa4480_switch_set(struct typec_switch_dev *sw,
+			      enum typec_orientation orientation)
+{
+	struct fsa4480 *fsa = typec_switch_get_drvdata(sw);
+	u8 new_sel;
+
+	mutex_lock(&fsa->lock);
+	new_sel = FSA4480_SEL_USB;
+	if (orientation == TYPEC_ORIENTATION_REVERSE)
+		new_sel |= FSA4480_SEL_SBU_REVERSE;
+
+	if (new_sel == fsa->cur_select)
+		goto out_unlock;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		/* Disable SBU output while re-configuring the switch */
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE,
+			     fsa->cur_enable & ~FSA4480_ENABLE_SBU);
+
+		/* 35us to allow the SBU switch to turn off */
+		usleep_range(35, 1000);
+	}
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel);
+	fsa->cur_select = new_sel;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+		/* 15us to allow the SBU switch to turn on again */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
+{
+	struct fsa4480 *fsa = typec_mux_get_drvdata(mux);
+	u8 new_enable;
+
+	mutex_lock(&fsa->lock);
+
+	new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	if (state->mode >= TYPEC_DP_STATE_A)
+		new_enable |= FSA4480_ENABLE_SBU;
+
+	if (new_enable == fsa->cur_enable)
+		goto out_unlock;
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable);
+	fsa->cur_enable = new_enable;
+
+	if (new_enable & FSA4480_ENABLE_SBU) {
+		/* 15us to allow the SBU switch to turn off */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
+	struct fsa4480 *fsa;
+
+	fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL);
+	if (!fsa)
+		return -ENOMEM;
+
+	fsa->client = client;
+	mutex_init(&fsa->lock);
+
+	fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config);
+	if (IS_ERR(fsa->regmap)) {
+		dev_err(dev, "failed to initialize regmap\n");
+		return PTR_ERR(fsa->regmap);
+	}
+
+	fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	fsa->cur_select = FSA4480_SEL_USB;
+
+	/* set default settings */
+	regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+	sw_desc.drvdata = fsa;
+	sw_desc.fwnode = dev->fwnode;
+	sw_desc.set = fsa4480_switch_set;
+
+	fsa->sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(fsa->sw)) {
+		dev_err(dev, "failed to register typec switch: %ld\n", PTR_ERR(fsa->sw));
+		return PTR_ERR(fsa->sw);
+	}
+
+	mux_desc.drvdata = fsa;
+	mux_desc.fwnode = dev->fwnode;
+	mux_desc.set = fsa4480_mux_set;
+
+	fsa->mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(fsa->mux)) {
+		typec_switch_unregister(fsa->sw);
+		dev_err(dev, "failed to register typec mux: %ld\n", PTR_ERR(fsa->mux));
+		return PTR_ERR(fsa->mux);
+	}
+
+	i2c_set_clientdata(client, fsa);
+	return 0;
+}
+
+static int fsa4480_remove(struct i2c_client *client)
+{
+	struct fsa4480 *fsa = i2c_get_clientdata(client);
+
+	typec_mux_unregister(fsa->mux);
+	typec_switch_unregister(fsa->sw);
+
+	return 0;
+}
+
+static const struct i2c_device_id fsa4480_table[] = {
+	{ "fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fsa4480_table);
+
+static const struct of_device_id fsa4480_of_table[] = {
+	{ .compatible = "fcs,fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fsa4480_of_table);
+
+static struct i2c_driver fsa4480_driver = {
+	.driver = {
+		.name = "fsa4480",
+		.of_match_table = fsa4480_of_table,
+	},
+	.probe_new	= fsa4480_probe,
+	.remove		= fsa4480_remove,
+	.id_table	= fsa4480_table,
+};
+
+module_i2c_driver(fsa4480_driver);
+
+MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver");
+MODULE_LICENSE("GPL v2");