diff mbox series

dt-bindings: crypto: convert rockchip-crypto to yaml

Message ID 20220209124725.2080986-1-clabbe@baylibre.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: crypto: convert rockchip-crypto to yaml | expand

Commit Message

Corentin LABBE Feb. 9, 2022, 12:47 p.m. UTC 
Convert rockchip-crypto to yaml.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 .../bindings/crypto/rockchip-crypto.txt       | 28 --------
 .../bindings/crypto/rockchip-crypto.yaml      | 64 +++++++++++++++++++
 2 files changed, 64 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
 create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml

Comments

Heiko Stübner Feb. 9, 2022, 12:52 p.m. UTC | #1 
Am Mittwoch, 9. Februar 2022, 13:47:25 CET schrieb Corentin Labbe:
> Convert rockchip-crypto to yaml.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  .../bindings/crypto/rockchip-crypto.txt       | 28 --------
>  .../bindings/crypto/rockchip-crypto.yaml      | 64 +++++++++++++++++++
>  2 files changed, 64 insertions(+), 28 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
>  create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> 
> diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> deleted file mode 100644
> index 5e2ba385b8c9..000000000000
> --- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -Rockchip Electronics And Security Accelerator
> -
> -Required properties:
> -- compatible: Should be "rockchip,rk3288-crypto"
> -- reg: Base physical address of the engine and length of memory mapped
> -       region
> -- interrupts: Interrupt number
> -- clocks: Reference to the clocks about crypto
> -- clock-names: "aclk" used to clock data
> -	       "hclk" used to clock data
> -	       "sclk" used to clock crypto accelerator
> -	       "apb_pclk" used to clock dma
> -- resets: Must contain an entry for each entry in reset-names.
> -	  See ../reset/reset.txt for details.
> -- reset-names: Must include the name "crypto-rst".
> -
> -Examples:
> -
> -	crypto: cypto-controller@ff8a0000 {
> -		compatible = "rockchip,rk3288-crypto";
> -		reg = <0xff8a0000 0x4000>;
> -		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> -			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
> -		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> -		resets = <&cru SRST_CRYPTO>;
> -		reset-names = "crypto-rst";
> -	};
> diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> new file mode 100644
> index 000000000000..392d89055398
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/crypto/rockchip-crypto.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip Electronics And Security Accelerator
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +properties:
> +  compatible:
> +    const: rockchip,rk3288-crypto
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: clock data
> +      - description: clock data
> +      - description: clock crypto accelerator
> +      - description: clock dma
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +      - const: hclk
> +      - const: sclk
> +      - const: apb_pclk
> +
> +  resets:
> +    minItems: 1
> +
> +  reset-names:
> +    const: crypto-rst
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |

Binding itself looks good.

But the constants below will probably trigger a compiler-error and
therefore Rob's bot.

You will need something like 

    #include <dt-bindings/clock/rk3399-cru.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

here.

A "make ..... dt_binding_check" should show the issue and also
it going away with the right includes ;-)

Heiko


> +    crypto: crypto@ff8a0000 {
> +      compatible = "rockchip,rk3288-crypto";
> +      reg = <0xff8a0000 0x4000>;
> +      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> +               <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
> +      clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> +      resets = <&cru SRST_CRYPTO>;
> +      reset-names = "crypto-rst";
> +    };
>
Corentin Labbe Feb. 9, 2022, 1:42 p.m. UTC | #2 
Le Wed, Feb 09, 2022 at 01:52:45PM +0100, Heiko Stübner a écrit :
> Am Mittwoch, 9. Februar 2022, 13:47:25 CET schrieb Corentin Labbe:
> > Convert rockchip-crypto to yaml.
> > 
> > Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> > ---
> >  .../bindings/crypto/rockchip-crypto.txt       | 28 --------
> >  .../bindings/crypto/rockchip-crypto.yaml      | 64 +++++++++++++++++++
> >  2 files changed, 64 insertions(+), 28 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> >  create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> > deleted file mode 100644
> > index 5e2ba385b8c9..000000000000
> > --- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> > +++ /dev/null
> > @@ -1,28 +0,0 @@
> > -Rockchip Electronics And Security Accelerator
> > -
> > -Required properties:
> > -- compatible: Should be "rockchip,rk3288-crypto"
> > -- reg: Base physical address of the engine and length of memory mapped
> > -       region
> > -- interrupts: Interrupt number
> > -- clocks: Reference to the clocks about crypto
> > -- clock-names: "aclk" used to clock data
> > -	       "hclk" used to clock data
> > -	       "sclk" used to clock crypto accelerator
> > -	       "apb_pclk" used to clock dma
> > -- resets: Must contain an entry for each entry in reset-names.
> > -	  See ../reset/reset.txt for details.
> > -- reset-names: Must include the name "crypto-rst".
> > -
> > -Examples:
> > -
> > -	crypto: cypto-controller@ff8a0000 {
> > -		compatible = "rockchip,rk3288-crypto";
> > -		reg = <0xff8a0000 0x4000>;
> > -		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> > -		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> > -			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
> > -		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> > -		resets = <&cru SRST_CRYPTO>;
> > -		reset-names = "crypto-rst";
> > -	};
> > diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> > new file mode 100644
> > index 000000000000..392d89055398
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> > @@ -0,0 +1,64 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/crypto/rockchip-crypto.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Rockchip Electronics And Security Accelerator
> > +
> > +maintainers:
> > +  - Heiko Stuebner <heiko@sntech.de>
> > +
> > +properties:
> > +  compatible:
> > +    const: rockchip,rk3288-crypto
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: clock data
> > +      - description: clock data
> > +      - description: clock crypto accelerator
> > +      - description: clock dma
> > +
> > +  clock-names:
> > +    items:
> > +      - const: aclk
> > +      - const: hclk
> > +      - const: sclk
> > +      - const: apb_pclk
> > +
> > +  resets:
> > +    minItems: 1
> > +
> > +  reset-names:
> > +    const: crypto-rst
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - resets
> > +  - reset-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> 
> Binding itself looks good.
> 
> But the constants below will probably trigger a compiler-error and
> therefore Rob's bot.
> 
> You will need something like 
> 
>     #include <dt-bindings/clock/rk3399-cru.h>
>     #include <dt-bindings/interrupt-controller/arm-gic.h>
> 
> here.
> 
> A "make ..... dt_binding_check" should show the issue and also
> it going away with the right includes ;-)
> 
> Heiko
> 

Right, I forgot to add this file in my "dt to check" via dt_binding_check, but the following make dtbs_check made me believe it was tested.

I will send a v2 soon.

Regards
Krzysztof Kozlowski Feb. 9, 2022, 1:46 p.m. UTC | #3 
On 09/02/2022 13:47, Corentin Labbe wrote:
> Convert rockchip-crypto to yaml.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  .../bindings/crypto/rockchip-crypto.txt       | 28 --------
>  .../bindings/crypto/rockchip-crypto.yaml      | 64 +++++++++++++++++++
>  2 files changed, 64 insertions(+), 28 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
>  create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> 
> diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> deleted file mode 100644
> index 5e2ba385b8c9..000000000000
> --- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -Rockchip Electronics And Security Accelerator
> -
> -Required properties:
> -- compatible: Should be "rockchip,rk3288-crypto"
> -- reg: Base physical address of the engine and length of memory mapped
> -       region
> -- interrupts: Interrupt number
> -- clocks: Reference to the clocks about crypto
> -- clock-names: "aclk" used to clock data
> -	       "hclk" used to clock data
> -	       "sclk" used to clock crypto accelerator
> -	       "apb_pclk" used to clock dma
> -- resets: Must contain an entry for each entry in reset-names.
> -	  See ../reset/reset.txt for details.
> -- reset-names: Must include the name "crypto-rst".
> -
> -Examples:
> -
> -	crypto: cypto-controller@ff8a0000 {
> -		compatible = "rockchip,rk3288-crypto";
> -		reg = <0xff8a0000 0x4000>;
> -		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> -			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
> -		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> -		resets = <&cru SRST_CRYPTO>;
> -		reset-names = "crypto-rst";
> -	};
> diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> new file mode 100644
> index 000000000000..392d89055398
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml

file name: rockchip,crypto.yaml or rockchip,rk3288-crypto.yaml.
Kind of depends whether there is another binding possible for newer
Crypto blocks from Rockchip. I guess it is quite possible, so maybe the
latter version.


> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/crypto/rockchip-crypto.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip Electronics And Security Accelerator
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +properties:
> +  compatible:
> +    const: rockchip,rk3288-crypto
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: clock data
> +      - description: clock data
> +      - description: clock crypto accelerator
> +      - description: clock dma
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +      - const: hclk
> +      - const: sclk
> +      - const: apb_pclk
> +
> +  resets:
> +    minItems: 1

Instead maxItems: 1

> +
> +  reset-names:
> +    const: crypto-rst
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    crypto: crypto@ff8a0000 {
> +      compatible = "rockchip,rk3288-crypto";
> +      reg = <0xff8a0000 0x4000>;
> +      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
> +               <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;

Does it work? Did you run dt_binding_check?

> +      clock-names = "aclk", "hclk", "sclk", "apb_pclk";
> +      resets = <&cru SRST_CRYPTO>;
> +      reset-names = "crypto-rst";
> +    };


Best regards,
Krzysztof
Rob Herring (Arm) Feb. 9, 2022, 3:35 p.m. UTC | #4 
On Wed, 09 Feb 2022 12:47:25 +0000, Corentin Labbe wrote:
> Convert rockchip-crypto to yaml.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  .../bindings/crypto/rockchip-crypto.txt       | 28 --------
>  .../bindings/crypto/rockchip-crypto.yaml      | 64 +++++++++++++++++++
>  2 files changed, 64 insertions(+), 28 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
>  create mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/crypto/rockchip-crypto.example.dts:22.25-26 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:378: Documentation/devicetree/bindings/crypto/rockchip-crypto.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1398: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1590370

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
deleted file mode 100644
index 5e2ba385b8c9..000000000000
--- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
+++ /dev/null
@@ -1,28 +0,0 @@ 
-Rockchip Electronics And Security Accelerator
-
-Required properties:
-- compatible: Should be "rockchip,rk3288-crypto"
-- reg: Base physical address of the engine and length of memory mapped
-       region
-- interrupts: Interrupt number
-- clocks: Reference to the clocks about crypto
-- clock-names: "aclk" used to clock data
-	       "hclk" used to clock data
-	       "sclk" used to clock crypto accelerator
-	       "apb_pclk" used to clock dma
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-- reset-names: Must include the name "crypto-rst".
-
-Examples:
-
-	crypto: cypto-controller@ff8a0000 {
-		compatible = "rockchip,rk3288-crypto";
-		reg = <0xff8a0000 0x4000>;
-		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
-			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
-		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
-		resets = <&cru SRST_CRYPTO>;
-		reset-names = "crypto-rst";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
new file mode 100644
index 000000000000..392d89055398
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/rockchip-crypto.yaml
@@ -0,0 +1,64 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/rockchip-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Electronics And Security Accelerator
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3288-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock data
+      - description: clock data
+      - description: clock crypto accelerator
+      - description: clock dma
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: sclk
+      - const: apb_pclk
+
+  resets:
+    minItems: 1
+
+  reset-names:
+    const: crypto-rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto: crypto@ff8a0000 {
+      compatible = "rockchip,rk3288-crypto";
+      reg = <0xff8a0000 0x4000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+               <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+      clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+      resets = <&cru SRST_CRYPTO>;
+      reset-names = "crypto-rst";
+    };