diff mbox series

[17/49] cpufreq: replace cpumask_weight with cpumask_empty where appropriate

Message ID 20220210224933.379149-18-yury.norov@gmail.com (mailing list archive)
State Superseded, archived
Headers show
Series None | expand

Commit Message

Yury Norov Feb. 10, 2022, 10:49 p.m. UTC 
drivers/cpufreq calls cpumask_weight() to check if any bit of a given
cpumask is set. We can do it more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for SCMI cpufreq driver)
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
 drivers/cpufreq/scmi-cpufreq.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Viresh Kumar Feb. 11, 2022, 4:30 a.m. UTC | #1 
On 10-02-22, 14:49, Yury Norov wrote:
> drivers/cpufreq calls cpumask_weight() to check if any bit of a given
> cpumask is set. We can do it more efficiently with cpumask_empty() because
> cpumask_empty() stops traversing the cpumask as soon as it finds first set
> bit, while cpumask_weight() counts all bits unconditionally.
> 
> Signed-off-by: Yury Norov <yury.norov@gmail.com>
> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for SCMI cpufreq driver)
> ---
>  drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
>  drivers/cpufreq/scmi-cpufreq.c    | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)

I already applied it yesterday and replied to you as well. Did I miss
something ?
Yury Norov Feb. 11, 2022, 5:17 a.m. UTC | #2 
On Fri, Feb 11, 2022 at 10:00:57AM +0530, Viresh Kumar wrote:
> On 10-02-22, 14:49, Yury Norov wrote:
> > drivers/cpufreq calls cpumask_weight() to check if any bit of a given
> > cpumask is set. We can do it more efficiently with cpumask_empty() because
> > cpumask_empty() stops traversing the cpumask as soon as it finds first set
> > bit, while cpumask_weight() counts all bits unconditionally.
> > 
> > Signed-off-by: Yury Norov <yury.norov@gmail.com>
> > Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> (for SCMI cpufreq driver)
> > ---
> >  drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
> >  drivers/cpufreq/scmi-cpufreq.c    | 2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> I already applied it yesterday and replied to you as well. Did I miss
> something ?

It appeared in next today after I prepared this series, that's why it
slipped through. Sorry for that. Please ignore this patch.

Thanks,
Yury
diff mbox series

Patch

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 05f3d7876e44..95a0c57ab5bb 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -482,7 +482,7 @@  static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	qcom_get_related_cpus(index, policy->cpus);
-	if (!cpumask_weight(policy->cpus)) {
+	if (cpumask_empty(policy->cpus)) {
 		dev_err(dev, "Domain-%d failed to get related CPUs\n", index);
 		ret = -ENOENT;
 		goto error;
diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 1e0cd4d165f0..919fa6e3f462 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -154,7 +154,7 @@  static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	 * table and opp-shared.
 	 */
 	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, priv->opp_shared_cpus);
-	if (ret || !cpumask_weight(priv->opp_shared_cpus)) {
+	if (ret || cpumask_empty(priv->opp_shared_cpus)) {
 		/*
 		 * Either opp-table is not set or no opp-shared was found.
 		 * Use the CPU mask from SCMI to designate CPUs sharing an OPP