| Message ID | 20220211193250.1904843-8-mario.limonciello@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Overhaul `is_thunderbolt` | expand |
Make the subject specific, not just "appropriately." I think you're marking something *removable*, so include that. On Fri, Feb 11, 2022 at 01:32:45PM -0600, Mario Limonciello wrote: > Discrete USB4 controllers won't have ACPI nodes specifying which > PCIe or XHCI port they are linked with. > > In order to set the removable attribute appropriately, use the > USB4 DVSEC extended capabability set on these root ports to determine > if they are located on a discrete USB4 controller. s/capabability/capability/ > Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Link: https://usb.org/sites/default/files/USB4%20Specification%2020211116.zip > Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> > --- > drivers/pci/probe.c | 33 +++++++++++++++++++++++++++++++++ > include/linux/pci_ids.h | 2 ++ > 2 files changed, 35 insertions(+) > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 67ca33188cba..1ed3e24db11e 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -25,6 +25,8 @@ > #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */ > #define CARDBUS_RESERVE_BUSNR 3 > > +#define PCI_DVSEC_ID_USB4 0x23 > + > static struct resource busn_resource = { > .name = "PCI busn", > .start = 0, > @@ -1590,6 +1592,36 @@ static void set_pcie_untrusted(struct pci_dev *dev) > dev->untrusted = true; > } > > +static bool pci_is_discrete_usb4(struct pci_dev *dev) > +{ > + int dvsec_val = 0, pos; > + u32 hdr; > + > + /* USB4 spec says vendors can use either */ > + pos = pci_find_dvsec_capability(dev, > + PCI_VENDOR_ID_INTEL, > + PCI_DVSEC_ID_USB4); > + if (pos) { > + dvsec_val = 0x06; > + } else { > + pos = pci_find_dvsec_capability(dev, > + PCI_VENDOR_ID_USB_IF, > + PCI_DVSEC_ID_USB4); > + if (pos) > + dvsec_val = 0x01; > + } > + if (!dvsec_val) > + return false; > + > + pci_read_config_dword(dev, pos + PCI_DVSEC_HEADER2, &hdr); > + if ((hdr & GENMASK(15, 0)) != dvsec_val) > + return false; > + /* this port is used for either NHI/PCIe tunnel/USB tunnel */ Capitalize comment like others in this file. Spec reference would be helpful, too. I don't know how to verify any of these values. The Link: above is great, but name, revision, section number would be even better. > + if (hdr & GENMASK(18, 16)) > + return true; > + return false; > +} > + > static void pci_set_removable(struct pci_dev *dev) > { > struct pci_dev *parent = pci_upstream_bridge(dev); > @@ -1612,6 +1644,7 @@ static void pci_set_removable(struct pci_dev *dev) > if (vsec || > dev->class == PCI_CLASS_SERIAL_USB_USB4 || > pci_acpi_is_usb4(dev) || > + pci_is_discrete_usb4(dev) || > (parent && > (parent->external_facing || dev_is_removable(&parent->dev)))) > dev_set_removable(&dev->dev, DEVICE_REMOVABLE); > diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h > index 61b161d914f0..271326e058b9 100644 > --- a/include/linux/pci_ids.h > +++ b/include/linux/pci_ids.h > @@ -3097,4 +3097,6 @@ > > #define PCI_VENDOR_ID_NCUBE 0x10ff > > +#define PCI_VENDOR_ID_USB_IF 0x1EC0 This file is supposed to be sorted by Vendor ID. PCI_VENDOR_ID_XEN, PCI_VENDOR_ID_OCZ, and PCI_VENDOR_ID_NCUBE screwed up, but you can put USB_IF in the correct spot. It's not 100%, but most entries use lower-case hex.
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 67ca33188cba..1ed3e24db11e 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -25,6 +25,8 @@ #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */ #define CARDBUS_RESERVE_BUSNR 3 +#define PCI_DVSEC_ID_USB4 0x23 + static struct resource busn_resource = { .name = "PCI busn", .start = 0, @@ -1590,6 +1592,36 @@ static void set_pcie_untrusted(struct pci_dev *dev) dev->untrusted = true; } +static bool pci_is_discrete_usb4(struct pci_dev *dev) +{ + int dvsec_val = 0, pos; + u32 hdr; + + /* USB4 spec says vendors can use either */ + pos = pci_find_dvsec_capability(dev, + PCI_VENDOR_ID_INTEL, + PCI_DVSEC_ID_USB4); + if (pos) { + dvsec_val = 0x06; + } else { + pos = pci_find_dvsec_capability(dev, + PCI_VENDOR_ID_USB_IF, + PCI_DVSEC_ID_USB4); + if (pos) + dvsec_val = 0x01; + } + if (!dvsec_val) + return false; + + pci_read_config_dword(dev, pos + PCI_DVSEC_HEADER2, &hdr); + if ((hdr & GENMASK(15, 0)) != dvsec_val) + return false; + /* this port is used for either NHI/PCIe tunnel/USB tunnel */ + if (hdr & GENMASK(18, 16)) + return true; + return false; +} + static void pci_set_removable(struct pci_dev *dev) { struct pci_dev *parent = pci_upstream_bridge(dev); @@ -1612,6 +1644,7 @@ static void pci_set_removable(struct pci_dev *dev) if (vsec || dev->class == PCI_CLASS_SERIAL_USB_USB4 || pci_acpi_is_usb4(dev) || + pci_is_discrete_usb4(dev) || (parent && (parent->external_facing || dev_is_removable(&parent->dev)))) dev_set_removable(&dev->dev, DEVICE_REMOVABLE); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 61b161d914f0..271326e058b9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -3097,4 +3097,6 @@ #define PCI_VENDOR_ID_NCUBE 0x10ff +#define PCI_VENDOR_ID_USB_IF 0x1EC0 + #endif /* _LINUX_PCI_IDS_H */
Discrete USB4 controllers won't have ACPI nodes specifying which PCIe or XHCI port they are linked with. In order to set the removable attribute appropriately, use the USB4 DVSEC extended capabability set on these root ports to determine if they are located on a discrete USB4 controller. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://usb.org/sites/default/files/USB4%20Specification%2020211116.zip Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> --- drivers/pci/probe.c | 33 +++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 2 ++ 2 files changed, 35 insertions(+)