@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/thermal.h>
#include <linux/util_macros.h>
enum tc654_regs {
@@ -384,28 +385,20 @@ static ssize_t pwm_show(struct device *dev, struct device_attribute *da,
return sprintf(buf, "%d\n", pwm);
}
-static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
- const char *buf, size_t count)
+static int _set_pwm(struct tc654_data *data, unsigned long val)
{
- struct tc654_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
- unsigned long val;
int ret;
- if (kstrtoul(buf, 10, &val))
- return -EINVAL;
- if (val > 255)
- return -EINVAL;
-
mutex_lock(&data->update_lock);
- if (val == 0)
+ if (val == 0) {
data->config |= TC654_REG_CONFIG_SDM;
- else
+ data->duty_cycle = 0;
+ } else {
data->config &= ~TC654_REG_CONFIG_SDM;
-
- data->duty_cycle = find_closest(val, tc654_pwm_map,
- ARRAY_SIZE(tc654_pwm_map));
+ data->duty_cycle = val - 1;
+ }
ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config);
if (ret < 0)
@@ -416,6 +409,24 @@ static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
out:
mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+static ssize_t pwm_store(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct tc654_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ if (kstrtoul(buf, 10, &val))
+ return -EINVAL;
+ if (val > 255)
+ return -EINVAL;
+ if (val > 0)
+ val = find_closest(val, tc654_pwm_map, ARRAY_SIZE(tc654_pwm_map)) + 1;
+
+ ret = _set_pwm(data, val);
return ret < 0 ? ret : count;
}
@@ -447,6 +458,58 @@ static struct attribute *tc654_attrs[] = {
ATTRIBUTE_GROUPS(tc654);
+/*
+ * thermal cooling device functions
+ *
+ * Account for the "ShutDown Mode (SDM)" state by offsetting
+ * the 16 PWM duty cycle states by 1.
+ *
+ * State 0 = 0% PWM | Shutdown - Fan(s) are off
+ * State 1 = 30% PWM | duty_cycle = 0
+ * State 2 = ~35% PWM | duty_cycle = 1
+ * [...]
+ * State 15 = ~95% PWM | duty_cycle = 14
+ * State 16 = 100% PWM | duty_cycle = 15
+ */
+#define TC654_MAX_COOLING_STATE 16
+
+static int tc654_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state)
+{
+ *state = TC654_MAX_COOLING_STATE;
+ return 0;
+}
+
+static int tc654_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state)
+{
+ struct tc654_data *data = tc654_update_client(cdev->devdata);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ if (data->config & TC654_REG_CONFIG_SDM)
+ *state = 0; /* FAN is off */
+ else
+ *state = data->duty_cycle + 1; /* offset PWM States by 1 */
+
+ return 0;
+}
+
+static int tc654_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+{
+ struct tc654_data *data = tc654_update_client(cdev->devdata);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return _set_pwm(data, clamp_val(state, 0, TC654_MAX_COOLING_STATE));
+}
+
+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
+ .get_max_state = tc654_get_max_state,
+ .get_cur_state = tc654_get_cur_state,
+ .set_cur_state = tc654_set_cur_state,
+};
+
/*
* device probe and removal
*/
@@ -477,7 +540,18 @@ static int tc654_probe(struct i2c_client *client)
hwmon_dev =
devm_hwmon_device_register_with_groups(dev, client->name, data,
tc654_groups);
- return PTR_ERR_OR_ZERO(hwmon_dev);
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
+
+ if (IS_ENABLED(CONFIG_THERMAL)) {
+ struct thermal_cooling_device *cdev;
+
+ cdev = devm_thermal_of_cooling_device_register(dev, dev->of_node, client->name,
+ hwmon_dev, &tc654_fan_cool_ops);
+ return PTR_ERR_OR_ZERO(cdev);
+ }
+
+ return 0;
}
static const struct i2c_device_id tc654_id[] = {
Adds thermal_cooling device support to the tc654/tc655 driver. This make it possible to integrate it into a device-tree supported thermal-zone node as a cooling device. I have been using this patch as part of the Netgear WNDR4700 Centria NAS Router support within OpenWrt since 2016. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- v1 -> v2: - Drop imply THERMAL - aligned ( so . everything is lining up v2 -> v3: - spelling fixes - set duty_cycle=0 when in SDM - TC654_COOLING_MAX_STATES => TC654_COOLING_MAX_STATE Note: I've checked if the setting the duty_cycle to 0 when switching off makes a difference. The result was: No. When it was switched back on: The fan(s) will always do a "full second on full blast". The TC654/TC655's datasheet describes this in "4.3 Fan Start-up" as follows: "Since the fan is at a rest position, the fan’s inertia must be overcome to get it started. The best way to accomplish this is to apply the full rated voltage to the fan for one second." --- drivers/hwmon/tc654.c | 104 ++++++++++++++++++++++++++++++++++++------ 1 file changed, 89 insertions(+), 15 deletions(-)