diff mbox series

[net-next,v3,2/2] net: dsa: realtek: realtek-mdio: reset before setup

Message ID 20220214022012.14787-3-luizluca@gmail.com (mailing list archive)
State Accepted
Commit 05f7b042c5a6d37f67e328388f31018e48711194
Delegated to: Netdev Maintainers
Headers show
Series net: dsa: realtek: realtek-mdio: reset before setup | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 8 of 8 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 59 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Luiz Angelo Daros de Luca Feb. 14, 2022, 2:20 a.m. UTC
Some devices, like the switch in Banana Pi BPI R64 only starts to answer
after a HW reset. It is the same reset code from realtek-smi.

Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
---
 drivers/net/dsa/realtek/realtek-mdio.c | 19 +++++++++++++++++++
 drivers/net/dsa/realtek/realtek-smi.c  |  6 ++----
 drivers/net/dsa/realtek/realtek.h      |  3 +++
 3 files changed, 24 insertions(+), 4 deletions(-)

Comments

Arınç ÜNAL Feb. 14, 2022, 6:22 a.m. UTC | #1
On 14/02/2022 05:20, Luiz Angelo Daros de Luca wrote:
> Some devices, like the switch in Banana Pi BPI R64 only starts to answer
> after a HW reset. It is the same reset code from realtek-smi.
> 
> Reported-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
> Tested-by: Frank Wunderlich <frank-w@public-files.de>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>

Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Arınç
diff mbox series

Patch

diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
index 0c5f2bdced9d..0308be95d00a 100644
--- a/drivers/net/dsa/realtek/realtek-mdio.c
+++ b/drivers/net/dsa/realtek/realtek-mdio.c
@@ -152,6 +152,21 @@  static int realtek_mdio_probe(struct mdio_device *mdiodev)
 	/* TODO: if power is software controlled, set up any regulators here */
 	priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
 
+	priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->reset)) {
+		dev_err(dev, "failed to get RESET GPIO\n");
+		return PTR_ERR(priv->reset);
+	}
+
+	if (priv->reset) {
+		gpiod_set_value(priv->reset, 1);
+		dev_dbg(dev, "asserted RESET\n");
+		msleep(REALTEK_HW_STOP_DELAY);
+		gpiod_set_value(priv->reset, 0);
+		msleep(REALTEK_HW_START_DELAY);
+		dev_dbg(dev, "deasserted RESET\n");
+	}
+
 	ret = priv->ops->detect(priv);
 	if (ret) {
 		dev_err(dev, "unable to detect switch\n");
@@ -185,6 +200,10 @@  static void realtek_mdio_remove(struct mdio_device *mdiodev)
 
 	dsa_unregister_switch(priv->ds);
 
+	/* leave the device reset asserted */
+	if (priv->reset)
+		gpiod_set_value(priv->reset, 1);
+
 	dev_set_drvdata(&mdiodev->dev, NULL);
 }
 
diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
index 33cf5a0692de..8806b74bd7a8 100644
--- a/drivers/net/dsa/realtek/realtek-smi.c
+++ b/drivers/net/dsa/realtek/realtek-smi.c
@@ -43,8 +43,6 @@ 
 #include "realtek.h"
 
 #define REALTEK_SMI_ACK_RETRY_COUNT		5
-#define REALTEK_SMI_HW_STOP_DELAY		25	/* msecs */
-#define REALTEK_SMI_HW_START_DELAY		100	/* msecs */
 
 static inline void realtek_smi_clk_delay(struct realtek_priv *priv)
 {
@@ -428,9 +426,9 @@  static int realtek_smi_probe(struct platform_device *pdev)
 	if (priv->reset) {
 		gpiod_set_value(priv->reset, 1);
 		dev_dbg(dev, "asserted RESET\n");
-		msleep(REALTEK_SMI_HW_STOP_DELAY);
+		msleep(REALTEK_HW_STOP_DELAY);
 		gpiod_set_value(priv->reset, 0);
-		msleep(REALTEK_SMI_HW_START_DELAY);
+		msleep(REALTEK_HW_START_DELAY);
 		dev_dbg(dev, "deasserted RESET\n");
 	}
 
diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
index ed5abf6cb3d6..443cf51cb918 100644
--- a/drivers/net/dsa/realtek/realtek.h
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -13,6 +13,9 @@ 
 #include <linux/gpio/consumer.h>
 #include <net/dsa.h>
 
+#define REALTEK_HW_STOP_DELAY		25	/* msecs */
+#define REALTEK_HW_START_DELAY		100	/* msecs */
+
 struct realtek_ops;
 struct dentry;
 struct inode;