| Message ID | 20220128002707.391076-12-ben.widawsky@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | CXL Region driver | expand |
On Thu, 27 Jan 2022 16:27:04 -0800 Ben Widawsky <ben.widawsky@intel.com> wrote: > CXL switches have HDM decoders just like host bridges and endpoints. > Their programming works in a similar fashion. > > The spec does not prohibit multiple levels of switches, however, those > are not implemented at this time. > > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> One trivial comment inline, but it's end of day here so I've not taken as deeper look at this as I probably will at some later date. Thanks, Jonathan > --- > drivers/cxl/cxl.h | 5 ++++ > drivers/cxl/region.c | 61 ++++++++++++++++++++++++++++++++++++++++++-- > 2 files changed, 64 insertions(+), 2 deletions(-) > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h > index 8ace6cca0776..d70d8c85d05f 100644 > --- a/drivers/cxl/cxl.h > +++ b/drivers/cxl/cxl.h > @@ -96,6 +96,11 @@ static inline u8 cxl_to_ig(u16 g) > return ilog2(g) - 8; > } > > +static inline int cxl_to_ways(u8 ways) > +{ > + return 1 << ways; This special case of cxl_to_interleave_ways probably needs some documentation or a name that makes it clear why it is special. > +} > + > static inline bool cxl_is_interleave_ways_valid(int iw) > { > switch (iw) { > diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c > index b8982be13bfe..f748060733dd 100644 > --- a/drivers/cxl/region.c > +++ b/drivers/cxl/region.c > @@ -359,6 +359,23 @@ static bool has_switch(const struct cxl_region *cxlr) > return false; > } > > +static bool has_multi_switch(const struct cxl_region *cxlr) > +{ > + struct cxl_memdev *ep; > + int i; > + > + for_each_cxl_endpoint(ep, cxlr, i) > + if (ep->port->depth > 3) > + return true; > + > + return false; > +} > + > +static struct cxl_port *get_switch(struct cxl_memdev *ep) > +{ > + return to_cxl_port(ep->port->dev.parent); > +} > + > static struct cxl_decoder *get_decoder(struct cxl_region *cxlr, > struct cxl_port *p) > { > @@ -409,6 +426,8 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > const struct cxl_decoder *rootd, > bool state_update) > { > + const int region_ig = cxl_to_ig(cxlr->config.interleave_granularity); > + const int region_eniw = cxl_to_eniw(cxlr->config.interleave_ways); > const int num_root_ports = get_num_root_ports(cxlr); > struct cxl_port *hbs[CXL_DECODER_MAX_INTERLEAVE]; > struct cxl_decoder *cxld, *c; > @@ -416,8 +435,12 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > hb_count = get_unique_hostbridges(cxlr, hbs); > > - /* TODO: Switch support */ > - if (has_switch(cxlr)) > + /* TODO: support multiple levels of switches */ > + if (has_multi_switch(cxlr)) > + return false; > + > + /* TODO: x3 interleave for switches is hard. */ > + if (has_switch(cxlr) && !is_power_of_2(region_ways(cxlr))) > return false; > > /* > @@ -470,8 +493,14 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > list_for_each_entry(rp, &hb->dports, list) { > struct cxl_memdev *ep; > int port_grouping = -1; > + int target_ndx; > > for_each_cxl_endpoint_hb(ep, cxlr, hb, idx) { > + struct cxl_decoder *switch_cxld; > + struct cxl_dport *target; > + struct cxl_port *switch_port; > + bool found = false; > + > if (get_rp(ep) != rp) > continue; > > @@ -499,6 +528,34 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > cxld->interleave_ways++; > cxld->target[port_grouping] = get_rp(ep); > + > + /* > + * At least one switch is connected here if the endpoint > + * has a depth > 2 > + */ > + if (ep->port->depth == 2) > + continue; > + > + /* Check the staged list to see if this > + * port has already been added > + */ > + switch_port = get_switch(ep); > + list_for_each_entry(switch_cxld, &cxlr->staged_list, region_link) { > + if (to_cxl_port(switch_cxld->dev.parent) == switch_port) > + found = true; > + } > + > + if (found) { > + target = cxl_find_dport_by_dev(switch_port, ep->dev.parent->parent); > + switch_cxld->target[target_ndx++] = target; > + continue; > + } > + > + target_ndx = 0; > + > + switch_cxld = get_decoder(cxlr, switch_port); > + switch_cxld->interleave_ways++; > + switch_cxld->interleave_granularity = cxl_to_ways(region_ig + region_eniw); > } > } > }
On Thu, 27 Jan 2022 16:27:04 -0800 Ben Widawsky <ben.widawsky@intel.com> wrote: > CXL switches have HDM decoders just like host bridges and endpoints. > Their programming works in a similar fashion. > > The spec does not prohibit multiple levels of switches, however, those > are not implemented at this time. > > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Hi Ben, I'm still hammering away at trying to bring up qemu switch emulation. Even though I know you are reworking this, seems only sensible to point out issues when I hit them. If no longer relevant you can ignore them! With these bits and a few other minor tweaks the decoders now look to be right - I just need to wire up the QEMU side so that I don't get hardware exceptions on actually reading and writing once the region is bound :) Thanks, J > --- > drivers/cxl/cxl.h | 5 ++++ > drivers/cxl/region.c | 61 ++++++++++++++++++++++++++++++++++++++++++-- > 2 files changed, 64 insertions(+), 2 deletions(-) > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h > index 8ace6cca0776..d70d8c85d05f 100644 > --- a/drivers/cxl/cxl.h > +++ b/drivers/cxl/cxl.h > @@ -96,6 +96,11 @@ static inline u8 cxl_to_ig(u16 g) > return ilog2(g) - 8; > } > > +static inline int cxl_to_ways(u8 ways) > +{ > + return 1 << ways; > +} > + > static inline bool cxl_is_interleave_ways_valid(int iw) > { > switch (iw) { > diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c > index b8982be13bfe..f748060733dd 100644 > --- a/drivers/cxl/region.c > +++ b/drivers/cxl/region.c > @@ -359,6 +359,23 @@ static bool has_switch(const struct cxl_region *cxlr) > return false; > } > > +static bool has_multi_switch(const struct cxl_region *cxlr) > +{ > + struct cxl_memdev *ep; > + int i; > + > + for_each_cxl_endpoint(ep, cxlr, i) > + if (ep->port->depth > 3) > + return true; > + > + return false; > +} > + > +static struct cxl_port *get_switch(struct cxl_memdev *ep) > +{ > + return to_cxl_port(ep->port->dev.parent); > +} > + > static struct cxl_decoder *get_decoder(struct cxl_region *cxlr, > struct cxl_port *p) > { > @@ -409,6 +426,8 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > const struct cxl_decoder *rootd, > bool state_update) > { > + const int region_ig = cxl_to_ig(cxlr->config.interleave_granularity); > + const int region_eniw = cxl_to_eniw(cxlr->config.interleave_ways); > const int num_root_ports = get_num_root_ports(cxlr); > struct cxl_port *hbs[CXL_DECODER_MAX_INTERLEAVE]; > struct cxl_decoder *cxld, *c; > @@ -416,8 +435,12 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > hb_count = get_unique_hostbridges(cxlr, hbs); > > - /* TODO: Switch support */ > - if (has_switch(cxlr)) > + /* TODO: support multiple levels of switches */ > + if (has_multi_switch(cxlr)) > + return false; > + > + /* TODO: x3 interleave for switches is hard. */ > + if (has_switch(cxlr) && !is_power_of_2(region_ways(cxlr))) > return false; > > /* > @@ -470,8 +493,14 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > list_for_each_entry(rp, &hb->dports, list) { > struct cxl_memdev *ep; > int port_grouping = -1; > + int target_ndx; As things currently stand, with a switch connected below a single port of a host bridge (4 type 3 off the switch) this will program the HB decoder to have 4 targets, all routed to the switch USP. There is an argument that this is correct but its not what I'd expect. I'd expect to see 1 target only. It's not a problem for small cases, but with enough rp and switches we can run out of targets. > > for_each_cxl_endpoint_hb(ep, cxlr, hb, idx) { > + struct cxl_decoder *switch_cxld; > + struct cxl_dport *target; > + struct cxl_port *switch_port; > + bool found = false; > + > if (get_rp(ep) != rp) > continue; > > @@ -499,6 +528,34 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > cxld->interleave_ways++; > cxld->target[port_grouping] = get_rp(ep); > + > + /* > + * At least one switch is connected here if the endpoint > + * has a depth > 2 > + */ > + if (ep->port->depth == 2) > + continue; > + > + /* Check the staged list to see if this > + * port has already been added > + */ > + switch_port = get_switch(ep); > + list_for_each_entry(switch_cxld, &cxlr->staged_list, region_link) { > + if (to_cxl_port(switch_cxld->dev.parent) == switch_port) > + found = true; break; > + } > + > + if (found) { > + target = cxl_find_dport_by_dev(switch_port, ep->dev.parent->parent); > + switch_cxld->target[target_ndx++] = target; > + continue; > + } > + > + target_ndx = 0; > + > + switch_cxld = get_decoder(cxlr, switch_port); > + switch_cxld->interleave_ways++; > + switch_cxld->interleave_granularity = cxl_to_ways(region_ig + region_eniw); I'm not following this. Perhaps comment on why this particular maths? I was assuming the switch interleave granularity would that of the region as the switch is last level of decode. Need to do the equivalent here of what you do in the if (found) or the first target is missed. Also need to be updating interleave_ways only in the found path, not here (as the default is 1) > } > } > }
On Tue, 15 Feb 2022 16:10:14 +0000 Jonathan Cameron <Jonathan.Cameron@Huawei.com> wrote: > On Thu, 27 Jan 2022 16:27:04 -0800 > Ben Widawsky <ben.widawsky@intel.com> wrote: > > > CXL switches have HDM decoders just like host bridges and endpoints. > > Their programming works in a similar fashion. > > > > The spec does not prohibit multiple levels of switches, however, those > > are not implemented at this time. > > > > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> > Hi Ben, > > I'm still hammering away at trying to bring up qemu switch emulation. > Even though I know you are reworking this, seems only sensible to point > out issues when I hit them. If no longer relevant you can ignore them! > > With these bits and a few other minor tweaks the decoders now look > to be right - I just need to wire up the QEMU side so that > I don't get hardware exceptions on actually reading and writing once > the region is bound :) QEMU emulation of a very basic CXL switch at: https://gitlab.com/jic23/qemu/-/commits/cxl-v7-draft-for-test Hope that is helpful for testing next version of this. I've been testing with a 4 port switch and 4 type 3 devices and with a few hacks/fixes as mentioned in review feedback it all works (well devmem2 gives me what I expect. :) Jonathan > > Thanks, > > J > > --- > > drivers/cxl/cxl.h | 5 ++++ > > drivers/cxl/region.c | 61 ++++++++++++++++++++++++++++++++++++++++++-- > > 2 files changed, 64 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h > > index 8ace6cca0776..d70d8c85d05f 100644 > > --- a/drivers/cxl/cxl.h > > +++ b/drivers/cxl/cxl.h > > @@ -96,6 +96,11 @@ static inline u8 cxl_to_ig(u16 g) > > return ilog2(g) - 8; > > } > > > > +static inline int cxl_to_ways(u8 ways) > > +{ > > + return 1 << ways; > > +} > > + > > static inline bool cxl_is_interleave_ways_valid(int iw) > > { > > switch (iw) { > > diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c > > index b8982be13bfe..f748060733dd 100644 > > --- a/drivers/cxl/region.c > > +++ b/drivers/cxl/region.c > > @@ -359,6 +359,23 @@ static bool has_switch(const struct cxl_region *cxlr) > > return false; > > } > > > > +static bool has_multi_switch(const struct cxl_region *cxlr) > > +{ > > + struct cxl_memdev *ep; > > + int i; > > + > > + for_each_cxl_endpoint(ep, cxlr, i) > > + if (ep->port->depth > 3) > > + return true; > > + > > + return false; > > +} > > + > > +static struct cxl_port *get_switch(struct cxl_memdev *ep) > > +{ > > + return to_cxl_port(ep->port->dev.parent); > > +} > > + > > static struct cxl_decoder *get_decoder(struct cxl_region *cxlr, > > struct cxl_port *p) > > { > > @@ -409,6 +426,8 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > const struct cxl_decoder *rootd, > > bool state_update) > > { > > + const int region_ig = cxl_to_ig(cxlr->config.interleave_granularity); > > + const int region_eniw = cxl_to_eniw(cxlr->config.interleave_ways); > > const int num_root_ports = get_num_root_ports(cxlr); > > struct cxl_port *hbs[CXL_DECODER_MAX_INTERLEAVE]; > > struct cxl_decoder *cxld, *c; > > @@ -416,8 +435,12 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > > > hb_count = get_unique_hostbridges(cxlr, hbs); > > > > - /* TODO: Switch support */ > > - if (has_switch(cxlr)) > > + /* TODO: support multiple levels of switches */ > > + if (has_multi_switch(cxlr)) > > + return false; > > + > > + /* TODO: x3 interleave for switches is hard. */ > > + if (has_switch(cxlr) && !is_power_of_2(region_ways(cxlr))) > > return false; > > > > /* > > @@ -470,8 +493,14 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > list_for_each_entry(rp, &hb->dports, list) { > > struct cxl_memdev *ep; > > int port_grouping = -1; > > + int target_ndx; > As things currently stand, with a switch connected below a single port > of a host bridge (4 type 3 off the switch) this will program the HB > decoder to have 4 targets, all routed to the switch USP. > > There is an argument that this is correct but its not what I'd expect. > I'd expect to see 1 target only. It's not a problem for small cases, but > with enough rp and switches we can run out of targets. > > > > > for_each_cxl_endpoint_hb(ep, cxlr, hb, idx) { > > + struct cxl_decoder *switch_cxld; > > + struct cxl_dport *target; > > + struct cxl_port *switch_port; > > + bool found = false; > > + > > if (get_rp(ep) != rp) > > continue; > > > > @@ -499,6 +528,34 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, > > > > cxld->interleave_ways++; > > cxld->target[port_grouping] = get_rp(ep); > > + > > + /* > > + * At least one switch is connected here if the endpoint > > + * has a depth > 2 > > + */ > > + if (ep->port->depth == 2) > > + continue; > > + > > + /* Check the staged list to see if this > > + * port has already been added > > + */ > > + switch_port = get_switch(ep); > > + list_for_each_entry(switch_cxld, &cxlr->staged_list, region_link) { > > + if (to_cxl_port(switch_cxld->dev.parent) == switch_port) > > + found = true; > > break; > > > + } > > + > > + if (found) { > > + target = cxl_find_dport_by_dev(switch_port, ep->dev.parent->parent); > > + switch_cxld->target[target_ndx++] = target; > > + continue; > > + } > > + > > + target_ndx = 0; > > + > > + switch_cxld = get_decoder(cxlr, switch_port); > > + switch_cxld->interleave_ways++; > > + switch_cxld->interleave_granularity = cxl_to_ways(region_ig + region_eniw); > > I'm not following this. Perhaps comment on why this particular maths? I was assuming the switch > interleave granularity would that of the region as the switch is last level of decode. > > Need to do the equivalent here of what you do in the if (found) or the first target is missed. > Also need to be updating interleave_ways only in the found path, not here (as the default is 1) > > > } > > } > > } >
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index 8ace6cca0776..d70d8c85d05f 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -96,6 +96,11 @@ static inline u8 cxl_to_ig(u16 g) return ilog2(g) - 8; } +static inline int cxl_to_ways(u8 ways) +{ + return 1 << ways; +} + static inline bool cxl_is_interleave_ways_valid(int iw) { switch (iw) { diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c index b8982be13bfe..f748060733dd 100644 --- a/drivers/cxl/region.c +++ b/drivers/cxl/region.c @@ -359,6 +359,23 @@ static bool has_switch(const struct cxl_region *cxlr) return false; } +static bool has_multi_switch(const struct cxl_region *cxlr) +{ + struct cxl_memdev *ep; + int i; + + for_each_cxl_endpoint(ep, cxlr, i) + if (ep->port->depth > 3) + return true; + + return false; +} + +static struct cxl_port *get_switch(struct cxl_memdev *ep) +{ + return to_cxl_port(ep->port->dev.parent); +} + static struct cxl_decoder *get_decoder(struct cxl_region *cxlr, struct cxl_port *p) { @@ -409,6 +426,8 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, const struct cxl_decoder *rootd, bool state_update) { + const int region_ig = cxl_to_ig(cxlr->config.interleave_granularity); + const int region_eniw = cxl_to_eniw(cxlr->config.interleave_ways); const int num_root_ports = get_num_root_ports(cxlr); struct cxl_port *hbs[CXL_DECODER_MAX_INTERLEAVE]; struct cxl_decoder *cxld, *c; @@ -416,8 +435,12 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, hb_count = get_unique_hostbridges(cxlr, hbs); - /* TODO: Switch support */ - if (has_switch(cxlr)) + /* TODO: support multiple levels of switches */ + if (has_multi_switch(cxlr)) + return false; + + /* TODO: x3 interleave for switches is hard. */ + if (has_switch(cxlr) && !is_power_of_2(region_ways(cxlr))) return false; /* @@ -470,8 +493,14 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, list_for_each_entry(rp, &hb->dports, list) { struct cxl_memdev *ep; int port_grouping = -1; + int target_ndx; for_each_cxl_endpoint_hb(ep, cxlr, hb, idx) { + struct cxl_decoder *switch_cxld; + struct cxl_dport *target; + struct cxl_port *switch_port; + bool found = false; + if (get_rp(ep) != rp) continue; @@ -499,6 +528,34 @@ static bool region_hb_rp_config_valid(struct cxl_region *cxlr, cxld->interleave_ways++; cxld->target[port_grouping] = get_rp(ep); + + /* + * At least one switch is connected here if the endpoint + * has a depth > 2 + */ + if (ep->port->depth == 2) + continue; + + /* Check the staged list to see if this + * port has already been added + */ + switch_port = get_switch(ep); + list_for_each_entry(switch_cxld, &cxlr->staged_list, region_link) { + if (to_cxl_port(switch_cxld->dev.parent) == switch_port) + found = true; + } + + if (found) { + target = cxl_find_dport_by_dev(switch_port, ep->dev.parent->parent); + switch_cxld->target[target_ndx++] = target; + continue; + } + + target_ndx = 0; + + switch_cxld = get_decoder(cxlr, switch_port); + switch_cxld->interleave_ways++; + switch_cxld->interleave_granularity = cxl_to_ways(region_ig + region_eniw); } } }
CXL switches have HDM decoders just like host bridges and endpoints. Their programming works in a similar fashion. The spec does not prohibit multiple levels of switches, however, those are not implemented at this time. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> --- drivers/cxl/cxl.h | 5 ++++ drivers/cxl/region.c | 61 ++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 64 insertions(+), 2 deletions(-)