Message ID | 20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
---|---|
State | Awaiting Upstream |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | can: rcar_canfd: Register the CAN device when fully ready | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Series ignored based on subject |
> On 02/21/2022 11:59 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > > Register the CAN device only when all the necessary initialization > is completed. This patch makes sure all the data structures and locks are > initialized before registering the CAN device. > > Reported-by: Pavel Machek <pavel@denx.de> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > drivers/net/can/rcar/rcar_canfd.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c > index 3ad3a6f6a1dd..8c378b20b2aa 100644 > --- a/drivers/net/can/rcar/rcar_canfd.c > +++ b/drivers/net/can/rcar/rcar_canfd.c > @@ -1783,15 +1783,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch, > > netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll, > RCANFD_NAPI_WEIGHT); > + spin_lock_init(&priv->tx_lock); > + devm_can_led_init(ndev); > + gpriv->ch[priv->channel] = priv; > err = register_candev(ndev); > if (err) { > dev_err(&pdev->dev, > "register_candev() failed, error %d\n", err); > goto fail_candev; > } > - spin_lock_init(&priv->tx_lock); > - devm_can_led_init(ndev); > - gpriv->ch[priv->channel] = priv; > dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel); > return 0; > > -- > 2.17.1 Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> CU Uli
On Mon 2022-02-21 22:59:35, Lad Prabhakar wrote: > Register the CAN device only when all the necessary initialization > is completed. This patch makes sure all the data structures and locks are > initialized before registering the CAN device. Reviewed-by: Pavel Machek <pavel@denx.de> I guess it will go to mainline and then -stable so that we don't have to do anything special? Best regards, Pavel
On 22.02.2022 14:43:58, Pavel Machek wrote: > On Mon 2022-02-21 22:59:35, Lad Prabhakar wrote: > > Register the CAN device only when all the necessary initialization > > is completed. This patch makes sure all the data structures and locks are > > initialized before registering the CAN device. > > Reviewed-by: Pavel Machek <pavel@denx.de> > > I guess it will go to mainline and then -stable so that we don't have > to do anything special? ACK Marc
On 21.02.2022 22:59:35, Lad Prabhakar wrote: > Register the CAN device only when all the necessary initialization > is completed. This patch makes sure all the data structures and locks are > initialized before registering the CAN device. Applied to can/testing. Thanks, Marc
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 3ad3a6f6a1dd..8c378b20b2aa 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -1783,15 +1783,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch, netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll, RCANFD_NAPI_WEIGHT); + spin_lock_init(&priv->tx_lock); + devm_can_led_init(ndev); + gpriv->ch[priv->channel] = priv; err = register_candev(ndev); if (err) { dev_err(&pdev->dev, "register_candev() failed, error %d\n", err); goto fail_candev; } - spin_lock_init(&priv->tx_lock); - devm_can_led_init(ndev); - gpriv->ch[priv->channel] = priv; dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel); return 0;
Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- drivers/net/can/rcar/rcar_canfd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)