| Message ID | 20220212182117.49438-17-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add initial support for MHI endpoint stack | expand |
On 2/12/22 12:21 PM, Manivannan Sadhasivam wrote: > Add support for MHI endpoint power_up that includes initializing the MMIO > and rings, caching the host MHI registers, and setting the MHI state to M0. > After registering the MHI EP controller, the stack has to be powered up > for usage. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Very little to say on this one. -Alex > --- > drivers/bus/mhi/ep/internal.h | 6 + > drivers/bus/mhi/ep/main.c | 229 ++++++++++++++++++++++++++++++++++ > include/linux/mhi_ep.h | 22 ++++ > 3 files changed, 257 insertions(+) > > diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h > index e4e8f06c2898..ee8c5974f0c0 100644 > --- a/drivers/bus/mhi/ep/internal.h > +++ b/drivers/bus/mhi/ep/internal.h > @@ -242,4 +242,10 @@ int mhi_ep_set_m0_state(struct mhi_ep_cntrl *mhi_cntrl); > int mhi_ep_set_m3_state(struct mhi_ep_cntrl *mhi_cntrl); > int mhi_ep_set_ready_state(struct mhi_ep_cntrl *mhi_cntrl); > > +/* MHI EP memory management functions */ > +int mhi_ep_alloc_map(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, size_t size, > + phys_addr_t *phys_ptr, void __iomem **virt); > +void mhi_ep_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys, > + void __iomem *virt, size_t size); > + > #endif > diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c > index 072b872e735b..016e819f640a 100644 > --- a/drivers/bus/mhi/ep/main.c > +++ b/drivers/bus/mhi/ep/main.c > @@ -16,6 +16,9 @@ > #include <linux/module.h> > #include "internal.h" > > +#define MHI_SUSPEND_MIN 100 > +#define MHI_SUSPEND_TIMEOUT 600 > + > static DEFINE_IDA(mhi_ep_cntrl_ida); > > static int mhi_ep_send_event(struct mhi_ep_cntrl *mhi_cntrl, u32 ring_idx, > @@ -143,6 +146,176 @@ static int mhi_ep_send_cmd_comp_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_e > return mhi_ep_send_event(mhi_cntrl, 0, &event); > } > > +int mhi_ep_alloc_map(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, size_t size, > + phys_addr_t *phys_ptr, void __iomem **virt) > +{ > + size_t offset = pci_addr % 0x1000; > + void __iomem *buf; > + phys_addr_t phys; > + int ret; > + > + size += offset; > + > + buf = mhi_cntrl->alloc_addr(mhi_cntrl, &phys, size); > + if (!buf) > + return -ENOMEM; > + > + ret = mhi_cntrl->map_addr(mhi_cntrl, phys, pci_addr - offset, size); > + if (ret) { > + mhi_cntrl->free_addr(mhi_cntrl, phys, buf, size); > + return ret; > + } > + > + *phys_ptr = phys + offset; > + *virt = buf + offset; > + > + return 0; > +} > + > +void mhi_ep_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys, > + void __iomem *virt, size_t size) > +{ > + size_t offset = pci_addr % 0x1000; > + > + size += offset; > + > + mhi_cntrl->unmap_addr(mhi_cntrl, phys - offset); > + mhi_cntrl->free_addr(mhi_cntrl, phys - offset, virt - offset, size); > +} > + > +static int mhi_ep_cache_host_cfg(struct mhi_ep_cntrl *mhi_cntrl) > +{ > + struct device *dev = &mhi_cntrl->mhi_dev->dev; > + int ret; > + > + /* Update the number of event rings (NER) programmed by the host */ > + mhi_ep_mmio_update_ner(mhi_cntrl); > + > + dev_dbg(dev, "Number of Event rings: %d, HW Event rings: %d\n", > + mhi_cntrl->event_rings, mhi_cntrl->hw_event_rings); > + > + mhi_cntrl->ch_ctx_host_size = sizeof(struct mhi_chan_ctxt) * > + mhi_cntrl->max_chan; > + mhi_cntrl->ev_ctx_host_size = sizeof(struct mhi_event_ctxt) * > + mhi_cntrl->event_rings; > + mhi_cntrl->cmd_ctx_host_size = sizeof(struct mhi_cmd_ctxt); If you're going to support NR_OF_CMD_RINGS command contexts, you should maybe multiply that here too? > + > + /* Get the channel context base pointer from host */ > + mhi_ep_mmio_get_chc_base(mhi_cntrl); > + > + /* Allocate and map memory for caching host channel context */ > + ret = mhi_ep_alloc_map(mhi_cntrl, mhi_cntrl->ch_ctx_host_pa, mhi_cntrl->ch_ctx_host_size, > + &mhi_cntrl->ch_ctx_cache_phys, > + (void __iomem **)&mhi_cntrl->ch_ctx_cache); > + if (ret) { > + dev_err(dev, "Failed to allocate and map ch_ctx_cache\n"); > + return ret; > + } > + > + /* Get the event context base pointer from host */ > + mhi_ep_mmio_get_erc_base(mhi_cntrl); > + > + /* Allocate and map memory for caching host event context */ > + ret = mhi_ep_alloc_map(mhi_cntrl, mhi_cntrl->ev_ctx_host_pa, mhi_cntrl->ev_ctx_host_size, > + &mhi_cntrl->ev_ctx_cache_phys, > + (void __iomem **)&mhi_cntrl->ev_ctx_cache); > + if (ret) { > + dev_err(dev, "Failed to allocate and map ev_ctx_cache\n"); > + goto err_ch_ctx; > + } > + > + /* Get the command context base pointer from host */ > + mhi_ep_mmio_get_crc_base(mhi_cntrl); > + > + /* Allocate and map memory for caching host command context */ > + ret = mhi_ep_alloc_map(mhi_cntrl, mhi_cntrl->cmd_ctx_host_pa, mhi_cntrl->cmd_ctx_host_size, > + &mhi_cntrl->cmd_ctx_cache_phys, > + (void __iomem **)&mhi_cntrl->cmd_ctx_cache); > + if (ret) { > + dev_err(dev, "Failed to allocate and map cmd_ctx_cache\n"); > + goto err_ev_ctx; > + } > + > + /* Initialize command ring */ > + ret = mhi_ep_ring_start(mhi_cntrl, &mhi_cntrl->mhi_cmd->ring, > + (union mhi_ep_ring_ctx *)mhi_cntrl->cmd_ctx_cache); > + if (ret) { > + dev_err(dev, "Failed to start the command ring\n"); > + goto err_cmd_ctx; > + } > + > + return ret; > + > +err_cmd_ctx: > + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->cmd_ctx_host_pa, mhi_cntrl->cmd_ctx_cache_phys, > + mhi_cntrl->cmd_ctx_cache, mhi_cntrl->cmd_ctx_host_size); > + > +err_ev_ctx: > + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ev_ctx_host_pa, mhi_cntrl->ev_ctx_cache_phys, > + mhi_cntrl->ev_ctx_cache, mhi_cntrl->ev_ctx_host_size); > + > +err_ch_ctx: > + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ch_ctx_host_pa, mhi_cntrl->ch_ctx_cache_phys, > + mhi_cntrl->ch_ctx_cache, mhi_cntrl->ch_ctx_host_size); > + > + return ret; > +} > + > +static void mhi_ep_free_host_cfg(struct mhi_ep_cntrl *mhi_cntrl) > +{ > + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->cmd_ctx_host_pa, mhi_cntrl->cmd_ctx_cache_phys, > + mhi_cntrl->cmd_ctx_cache, mhi_cntrl->cmd_ctx_host_size); > + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ev_ctx_host_pa, mhi_cntrl->ev_ctx_cache_phys, > + mhi_cntrl->ev_ctx_cache, mhi_cntrl->ev_ctx_host_size); > + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ch_ctx_host_pa, mhi_cntrl->ch_ctx_cache_phys, > + mhi_cntrl->ch_ctx_cache, mhi_cntrl->ch_ctx_host_size); > +} > + > +static void mhi_ep_enable_int(struct mhi_ep_cntrl *mhi_cntrl) > +{ Are channel doorbell interrupts enabled separately now? (There was previously an enable_chdb_interrupts() call.) > + mhi_ep_mmio_enable_ctrl_interrupt(mhi_cntrl); > + mhi_ep_mmio_enable_cmdb_interrupt(mhi_cntrl); > +} > + > +static int mhi_ep_enable(struct mhi_ep_cntrl *mhi_cntrl) > +{ > + struct device *dev = &mhi_cntrl->mhi_dev->dev; > + enum mhi_state state; > + u32 max_cnt = 0; > + bool mhi_reset; > + int ret; > + > + /* Wait for Host to set the M0 state */ > + do { > + msleep(MHI_SUSPEND_MIN); > + mhi_ep_mmio_get_mhi_state(mhi_cntrl, &state, &mhi_reset); > + if (mhi_reset) { > + /* Clear the MHI reset if host is in reset state */ > + mhi_ep_mmio_clear_reset(mhi_cntrl); > + dev_dbg(dev, "Host initiated reset while waiting for M0\n"); > + } > + max_cnt++; > + } while (state != MHI_STATE_M0 && max_cnt < MHI_SUSPEND_TIMEOUT); > + > + if (state == MHI_STATE_M0) { You could rearrange this and avoid a little indentation. if (state != MHI_STATE_M0) { dev_err(); return -ETIMEDOUT; } ret = mhi_ep_cache_host_cfg(); . . . > + ret = mhi_ep_cache_host_cfg(mhi_cntrl); > + if (ret) { > + dev_err(dev, "Failed to cache host config\n"); > + return ret; > + } > + > + mhi_ep_mmio_set_env(mhi_cntrl, MHI_EP_AMSS_EE); > + } else { > + dev_err(dev, "Host failed to enter M0\n"); > + return -ETIMEDOUT; > + } > + > + /* Enable all interrupts now */ > + mhi_ep_enable_int(mhi_cntrl); > + > + return 0; > +} > + > static void mhi_ep_ring_worker(struct work_struct *work) > { > struct mhi_ep_cntrl *mhi_cntrl = container_of(work, > @@ -319,6 +492,62 @@ static irqreturn_t mhi_ep_irq(int irq, void *data) > return IRQ_HANDLED; > } > > +int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl) > +{ > + struct device *dev = &mhi_cntrl->mhi_dev->dev; > + int ret, i; > + > + /* > + * Mask all interrupts until the state machine is ready. Interrupts will > + * be enabled later with mhi_ep_enable(). > + */ > + mhi_ep_mmio_mask_interrupts(mhi_cntrl); > + mhi_ep_mmio_init(mhi_cntrl); > + > + mhi_cntrl->mhi_event = kzalloc(mhi_cntrl->event_rings * (sizeof(*mhi_cntrl->mhi_event)), > + GFP_KERNEL); > + if (!mhi_cntrl->mhi_event) > + return -ENOMEM; > + > + /* Initialize command, channel and event rings */ > + mhi_ep_ring_init(&mhi_cntrl->mhi_cmd->ring, RING_TYPE_CMD, 0); > + for (i = 0; i < mhi_cntrl->max_chan; i++) > + mhi_ep_ring_init(&mhi_cntrl->mhi_chan[i].ring, RING_TYPE_CH, i); > + for (i = 0; i < mhi_cntrl->event_rings; i++) > + mhi_ep_ring_init(&mhi_cntrl->mhi_event[i].ring, RING_TYPE_ER, i); > + > + spin_lock_bh(&mhi_cntrl->state_lock); If we're powering up, is there anything else that could be looking at or updating the mhi_state? I ask because of the spinlock taken here. Not a big deal. But aside from that, I think this small block of code should be done by a funtion in "sm.c", because it sets the state. > + mhi_cntrl->mhi_state = MHI_STATE_RESET; > + spin_unlock_bh(&mhi_cntrl->state_lock); > + > + /* Set AMSS EE before signaling ready state */ > + mhi_ep_mmio_set_env(mhi_cntrl, MHI_EP_AMSS_EE); > + > + /* All set, notify the host that we are ready */ > + ret = mhi_ep_set_ready_state(mhi_cntrl); > + if (ret) > + goto err_free_event; > + > + dev_dbg(dev, "READY state notification sent to the host\n"); > + > + ret = mhi_ep_enable(mhi_cntrl); > + if (ret) { > + dev_err(dev, "Failed to enable MHI endpoint\n"); > + goto err_free_event; > + } > + > + enable_irq(mhi_cntrl->irq); > + mhi_cntrl->is_enabled = true; > + > + return 0; > + > +err_free_event: > + kfree(mhi_cntrl->mhi_event); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(mhi_ep_power_up); > + > static void mhi_ep_release_device(struct device *dev) > { > struct mhi_ep_device *mhi_dev = to_mhi_ep_device(dev); > diff --git a/include/linux/mhi_ep.h b/include/linux/mhi_ep.h > index a207058a4991..53895f1c68e1 100644 > --- a/include/linux/mhi_ep.h > +++ b/include/linux/mhi_ep.h > @@ -65,6 +65,12 @@ struct mhi_ep_db_info { > * @ch_ctx_host_pa: Physical address of host channel context data structure > * @ev_ctx_host_pa: Physical address of host event context data structure > * @cmd_ctx_host_pa: Physical address of host command context data structure > + * @ch_ctx_cache_phys: Physical address of the host channel context cache > + * @ev_ctx_cache_phys: Physical address of the host event context cache > + * @cmd_ctx_cache_phys: Physical address of the host command context cache > + * @ch_ctx_host_size: Size of the host channel context data structure > + * @ev_ctx_host_size: Size of the host event context data structure > + * @cmd_ctx_host_size: Size of the host command context data structure > * @state_wq: Dedicated workqueue for handling MHI state transitions > * @ring_wq: Dedicated workqueue for processing MHI rings > * @state_work: State transition worker > @@ -91,6 +97,7 @@ struct mhi_ep_db_info { > * @erdb_offset: Event ring doorbell offset set by the host > * @index: MHI Endpoint controller index > * @irq: IRQ used by the endpoint controller > + * @is_enabled: Check if the endpoint controller is enabled or not Maybe just "enabled"? > */ > struct mhi_ep_cntrl { > struct device *cntrl_dev; > @@ -108,6 +115,12 @@ struct mhi_ep_cntrl { > u64 ch_ctx_host_pa; > u64 ev_ctx_host_pa; > u64 cmd_ctx_host_pa; > + phys_addr_t ch_ctx_cache_phys; > + phys_addr_t ev_ctx_cache_phys; > + phys_addr_t cmd_ctx_cache_phys; I don't think the next three fields are worth stashing in this structure. They can be trivially recalculated from the size of the various context structures, and the only one that ever varies in size is the event context size. > + size_t ch_ctx_host_size; > + size_t ev_ctx_host_size; > + size_t cmd_ctx_host_size; > > struct workqueue_struct *state_wq; > struct workqueue_struct *ring_wq; > @@ -144,6 +157,7 @@ struct mhi_ep_cntrl { > u32 erdb_offset; > int index; > int irq; > + bool is_enabled; > }; > > /** > @@ -238,4 +252,12 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl, > */ > void mhi_ep_unregister_controller(struct mhi_ep_cntrl *mhi_cntrl); > > +/** > + * mhi_ep_power_up - Power up the MHI endpoint stack > + * @mhi_cntrl: MHI Endpoint controller > + * > + * Return: 0 if power up succeeds, a negative error code otherwise. > + */ > +int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl); > + > #endif
On Tue, Feb 15, 2022 at 04:39:37PM -0600, Alex Elder wrote: > On 2/12/22 12:21 PM, Manivannan Sadhasivam wrote: > > Add support for MHI endpoint power_up that includes initializing the MMIO > > and rings, caching the host MHI registers, and setting the MHI state to M0. > > After registering the MHI EP controller, the stack has to be powered up > > for usage. > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > Very little to say on this one. -Alex > > > --- > > drivers/bus/mhi/ep/internal.h | 6 + > > drivers/bus/mhi/ep/main.c | 229 ++++++++++++++++++++++++++++++++++ > > include/linux/mhi_ep.h | 22 ++++ > > 3 files changed, 257 insertions(+) > > > > diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h > > index e4e8f06c2898..ee8c5974f0c0 100644 > > --- a/drivers/bus/mhi/ep/internal.h > > +++ b/drivers/bus/mhi/ep/internal.h > > @@ -242,4 +242,10 @@ int mhi_ep_set_m0_state(struct mhi_ep_cntrl *mhi_cntrl); > > int mhi_ep_set_m3_state(struct mhi_ep_cntrl *mhi_cntrl); > > int mhi_ep_set_ready_state(struct mhi_ep_cntrl *mhi_cntrl); > > +/* MHI EP memory management functions */ > > +int mhi_ep_alloc_map(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, size_t size, > > + phys_addr_t *phys_ptr, void __iomem **virt); > > +void mhi_ep_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys, > > + void __iomem *virt, size_t size); > > + > > #endif > > diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c [...] > > + > > +static void mhi_ep_enable_int(struct mhi_ep_cntrl *mhi_cntrl) > > +{ > > Are channel doorbell interrupts enabled separately now? > (There was previously an enable_chdb_interrupts() call.) > Doorbell interrupts are enabled when the corresponding channel gets started. Enabling all interrupts here triggers spurious irqs as some of the interrupts associated with hw channels always get triggered. Thanks, Mani
On 2/22/22 3:08 AM, Manivannan Sadhasivam wrote: > On Tue, Feb 15, 2022 at 04:39:37PM -0600, Alex Elder wrote: >> On 2/12/22 12:21 PM, Manivannan Sadhasivam wrote: >>> Add support for MHI endpoint power_up that includes initializing the MMIO >>> and rings, caching the host MHI registers, and setting the MHI state to M0. >>> After registering the MHI EP controller, the stack has to be powered up >>> for usage. >>> >>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> >> >> Very little to say on this one. -Alex >> >>> --- >>> drivers/bus/mhi/ep/internal.h | 6 + >>> drivers/bus/mhi/ep/main.c | 229 ++++++++++++++++++++++++++++++++++ >>> include/linux/mhi_ep.h | 22 ++++ >>> 3 files changed, 257 insertions(+) >>> >>> diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h >>> index e4e8f06c2898..ee8c5974f0c0 100644 >>> --- a/drivers/bus/mhi/ep/internal.h >>> +++ b/drivers/bus/mhi/ep/internal.h >>> @@ -242,4 +242,10 @@ int mhi_ep_set_m0_state(struct mhi_ep_cntrl *mhi_cntrl); >>> int mhi_ep_set_m3_state(struct mhi_ep_cntrl *mhi_cntrl); >>> int mhi_ep_set_ready_state(struct mhi_ep_cntrl *mhi_cntrl); >>> +/* MHI EP memory management functions */ >>> +int mhi_ep_alloc_map(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, size_t size, >>> + phys_addr_t *phys_ptr, void __iomem **virt); >>> +void mhi_ep_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys, >>> + void __iomem *virt, size_t size); >>> + >>> #endif >>> diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c > > [...] > >>> + >>> +static void mhi_ep_enable_int(struct mhi_ep_cntrl *mhi_cntrl) >>> +{ >> >> Are channel doorbell interrupts enabled separately now? >> (There was previously an enable_chdb_interrupts() call.) >> > > Doorbell interrupts are enabled when the corresponding channel gets started. > Enabling all interrupts here triggers spurious irqs as some of the interrupts > associated with hw channels always get triggered. This is excellent. Thanks for the explanation. -Alex > > Thanks, > Mani
diff --git a/drivers/bus/mhi/ep/internal.h b/drivers/bus/mhi/ep/internal.h index e4e8f06c2898..ee8c5974f0c0 100644 --- a/drivers/bus/mhi/ep/internal.h +++ b/drivers/bus/mhi/ep/internal.h @@ -242,4 +242,10 @@ int mhi_ep_set_m0_state(struct mhi_ep_cntrl *mhi_cntrl); int mhi_ep_set_m3_state(struct mhi_ep_cntrl *mhi_cntrl); int mhi_ep_set_ready_state(struct mhi_ep_cntrl *mhi_cntrl); +/* MHI EP memory management functions */ +int mhi_ep_alloc_map(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, size_t size, + phys_addr_t *phys_ptr, void __iomem **virt); +void mhi_ep_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys, + void __iomem *virt, size_t size); + #endif diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c index 072b872e735b..016e819f640a 100644 --- a/drivers/bus/mhi/ep/main.c +++ b/drivers/bus/mhi/ep/main.c @@ -16,6 +16,9 @@ #include <linux/module.h> #include "internal.h" +#define MHI_SUSPEND_MIN 100 +#define MHI_SUSPEND_TIMEOUT 600 + static DEFINE_IDA(mhi_ep_cntrl_ida); static int mhi_ep_send_event(struct mhi_ep_cntrl *mhi_cntrl, u32 ring_idx, @@ -143,6 +146,176 @@ static int mhi_ep_send_cmd_comp_event(struct mhi_ep_cntrl *mhi_cntrl, enum mhi_e return mhi_ep_send_event(mhi_cntrl, 0, &event); } +int mhi_ep_alloc_map(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, size_t size, + phys_addr_t *phys_ptr, void __iomem **virt) +{ + size_t offset = pci_addr % 0x1000; + void __iomem *buf; + phys_addr_t phys; + int ret; + + size += offset; + + buf = mhi_cntrl->alloc_addr(mhi_cntrl, &phys, size); + if (!buf) + return -ENOMEM; + + ret = mhi_cntrl->map_addr(mhi_cntrl, phys, pci_addr - offset, size); + if (ret) { + mhi_cntrl->free_addr(mhi_cntrl, phys, buf, size); + return ret; + } + + *phys_ptr = phys + offset; + *virt = buf + offset; + + return 0; +} + +void mhi_ep_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t phys, + void __iomem *virt, size_t size) +{ + size_t offset = pci_addr % 0x1000; + + size += offset; + + mhi_cntrl->unmap_addr(mhi_cntrl, phys - offset); + mhi_cntrl->free_addr(mhi_cntrl, phys - offset, virt - offset, size); +} + +static int mhi_ep_cache_host_cfg(struct mhi_ep_cntrl *mhi_cntrl) +{ + struct device *dev = &mhi_cntrl->mhi_dev->dev; + int ret; + + /* Update the number of event rings (NER) programmed by the host */ + mhi_ep_mmio_update_ner(mhi_cntrl); + + dev_dbg(dev, "Number of Event rings: %d, HW Event rings: %d\n", + mhi_cntrl->event_rings, mhi_cntrl->hw_event_rings); + + mhi_cntrl->ch_ctx_host_size = sizeof(struct mhi_chan_ctxt) * + mhi_cntrl->max_chan; + mhi_cntrl->ev_ctx_host_size = sizeof(struct mhi_event_ctxt) * + mhi_cntrl->event_rings; + mhi_cntrl->cmd_ctx_host_size = sizeof(struct mhi_cmd_ctxt); + + /* Get the channel context base pointer from host */ + mhi_ep_mmio_get_chc_base(mhi_cntrl); + + /* Allocate and map memory for caching host channel context */ + ret = mhi_ep_alloc_map(mhi_cntrl, mhi_cntrl->ch_ctx_host_pa, mhi_cntrl->ch_ctx_host_size, + &mhi_cntrl->ch_ctx_cache_phys, + (void __iomem **)&mhi_cntrl->ch_ctx_cache); + if (ret) { + dev_err(dev, "Failed to allocate and map ch_ctx_cache\n"); + return ret; + } + + /* Get the event context base pointer from host */ + mhi_ep_mmio_get_erc_base(mhi_cntrl); + + /* Allocate and map memory for caching host event context */ + ret = mhi_ep_alloc_map(mhi_cntrl, mhi_cntrl->ev_ctx_host_pa, mhi_cntrl->ev_ctx_host_size, + &mhi_cntrl->ev_ctx_cache_phys, + (void __iomem **)&mhi_cntrl->ev_ctx_cache); + if (ret) { + dev_err(dev, "Failed to allocate and map ev_ctx_cache\n"); + goto err_ch_ctx; + } + + /* Get the command context base pointer from host */ + mhi_ep_mmio_get_crc_base(mhi_cntrl); + + /* Allocate and map memory for caching host command context */ + ret = mhi_ep_alloc_map(mhi_cntrl, mhi_cntrl->cmd_ctx_host_pa, mhi_cntrl->cmd_ctx_host_size, + &mhi_cntrl->cmd_ctx_cache_phys, + (void __iomem **)&mhi_cntrl->cmd_ctx_cache); + if (ret) { + dev_err(dev, "Failed to allocate and map cmd_ctx_cache\n"); + goto err_ev_ctx; + } + + /* Initialize command ring */ + ret = mhi_ep_ring_start(mhi_cntrl, &mhi_cntrl->mhi_cmd->ring, + (union mhi_ep_ring_ctx *)mhi_cntrl->cmd_ctx_cache); + if (ret) { + dev_err(dev, "Failed to start the command ring\n"); + goto err_cmd_ctx; + } + + return ret; + +err_cmd_ctx: + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->cmd_ctx_host_pa, mhi_cntrl->cmd_ctx_cache_phys, + mhi_cntrl->cmd_ctx_cache, mhi_cntrl->cmd_ctx_host_size); + +err_ev_ctx: + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ev_ctx_host_pa, mhi_cntrl->ev_ctx_cache_phys, + mhi_cntrl->ev_ctx_cache, mhi_cntrl->ev_ctx_host_size); + +err_ch_ctx: + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ch_ctx_host_pa, mhi_cntrl->ch_ctx_cache_phys, + mhi_cntrl->ch_ctx_cache, mhi_cntrl->ch_ctx_host_size); + + return ret; +} + +static void mhi_ep_free_host_cfg(struct mhi_ep_cntrl *mhi_cntrl) +{ + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->cmd_ctx_host_pa, mhi_cntrl->cmd_ctx_cache_phys, + mhi_cntrl->cmd_ctx_cache, mhi_cntrl->cmd_ctx_host_size); + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ev_ctx_host_pa, mhi_cntrl->ev_ctx_cache_phys, + mhi_cntrl->ev_ctx_cache, mhi_cntrl->ev_ctx_host_size); + mhi_ep_unmap_free(mhi_cntrl, mhi_cntrl->ch_ctx_host_pa, mhi_cntrl->ch_ctx_cache_phys, + mhi_cntrl->ch_ctx_cache, mhi_cntrl->ch_ctx_host_size); +} + +static void mhi_ep_enable_int(struct mhi_ep_cntrl *mhi_cntrl) +{ + mhi_ep_mmio_enable_ctrl_interrupt(mhi_cntrl); + mhi_ep_mmio_enable_cmdb_interrupt(mhi_cntrl); +} + +static int mhi_ep_enable(struct mhi_ep_cntrl *mhi_cntrl) +{ + struct device *dev = &mhi_cntrl->mhi_dev->dev; + enum mhi_state state; + u32 max_cnt = 0; + bool mhi_reset; + int ret; + + /* Wait for Host to set the M0 state */ + do { + msleep(MHI_SUSPEND_MIN); + mhi_ep_mmio_get_mhi_state(mhi_cntrl, &state, &mhi_reset); + if (mhi_reset) { + /* Clear the MHI reset if host is in reset state */ + mhi_ep_mmio_clear_reset(mhi_cntrl); + dev_dbg(dev, "Host initiated reset while waiting for M0\n"); + } + max_cnt++; + } while (state != MHI_STATE_M0 && max_cnt < MHI_SUSPEND_TIMEOUT); + + if (state == MHI_STATE_M0) { + ret = mhi_ep_cache_host_cfg(mhi_cntrl); + if (ret) { + dev_err(dev, "Failed to cache host config\n"); + return ret; + } + + mhi_ep_mmio_set_env(mhi_cntrl, MHI_EP_AMSS_EE); + } else { + dev_err(dev, "Host failed to enter M0\n"); + return -ETIMEDOUT; + } + + /* Enable all interrupts now */ + mhi_ep_enable_int(mhi_cntrl); + + return 0; +} + static void mhi_ep_ring_worker(struct work_struct *work) { struct mhi_ep_cntrl *mhi_cntrl = container_of(work, @@ -319,6 +492,62 @@ static irqreturn_t mhi_ep_irq(int irq, void *data) return IRQ_HANDLED; } +int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl) +{ + struct device *dev = &mhi_cntrl->mhi_dev->dev; + int ret, i; + + /* + * Mask all interrupts until the state machine is ready. Interrupts will + * be enabled later with mhi_ep_enable(). + */ + mhi_ep_mmio_mask_interrupts(mhi_cntrl); + mhi_ep_mmio_init(mhi_cntrl); + + mhi_cntrl->mhi_event = kzalloc(mhi_cntrl->event_rings * (sizeof(*mhi_cntrl->mhi_event)), + GFP_KERNEL); + if (!mhi_cntrl->mhi_event) + return -ENOMEM; + + /* Initialize command, channel and event rings */ + mhi_ep_ring_init(&mhi_cntrl->mhi_cmd->ring, RING_TYPE_CMD, 0); + for (i = 0; i < mhi_cntrl->max_chan; i++) + mhi_ep_ring_init(&mhi_cntrl->mhi_chan[i].ring, RING_TYPE_CH, i); + for (i = 0; i < mhi_cntrl->event_rings; i++) + mhi_ep_ring_init(&mhi_cntrl->mhi_event[i].ring, RING_TYPE_ER, i); + + spin_lock_bh(&mhi_cntrl->state_lock); + mhi_cntrl->mhi_state = MHI_STATE_RESET; + spin_unlock_bh(&mhi_cntrl->state_lock); + + /* Set AMSS EE before signaling ready state */ + mhi_ep_mmio_set_env(mhi_cntrl, MHI_EP_AMSS_EE); + + /* All set, notify the host that we are ready */ + ret = mhi_ep_set_ready_state(mhi_cntrl); + if (ret) + goto err_free_event; + + dev_dbg(dev, "READY state notification sent to the host\n"); + + ret = mhi_ep_enable(mhi_cntrl); + if (ret) { + dev_err(dev, "Failed to enable MHI endpoint\n"); + goto err_free_event; + } + + enable_irq(mhi_cntrl->irq); + mhi_cntrl->is_enabled = true; + + return 0; + +err_free_event: + kfree(mhi_cntrl->mhi_event); + + return ret; +} +EXPORT_SYMBOL_GPL(mhi_ep_power_up); + static void mhi_ep_release_device(struct device *dev) { struct mhi_ep_device *mhi_dev = to_mhi_ep_device(dev); diff --git a/include/linux/mhi_ep.h b/include/linux/mhi_ep.h index a207058a4991..53895f1c68e1 100644 --- a/include/linux/mhi_ep.h +++ b/include/linux/mhi_ep.h @@ -65,6 +65,12 @@ struct mhi_ep_db_info { * @ch_ctx_host_pa: Physical address of host channel context data structure * @ev_ctx_host_pa: Physical address of host event context data structure * @cmd_ctx_host_pa: Physical address of host command context data structure + * @ch_ctx_cache_phys: Physical address of the host channel context cache + * @ev_ctx_cache_phys: Physical address of the host event context cache + * @cmd_ctx_cache_phys: Physical address of the host command context cache + * @ch_ctx_host_size: Size of the host channel context data structure + * @ev_ctx_host_size: Size of the host event context data structure + * @cmd_ctx_host_size: Size of the host command context data structure * @state_wq: Dedicated workqueue for handling MHI state transitions * @ring_wq: Dedicated workqueue for processing MHI rings * @state_work: State transition worker @@ -91,6 +97,7 @@ struct mhi_ep_db_info { * @erdb_offset: Event ring doorbell offset set by the host * @index: MHI Endpoint controller index * @irq: IRQ used by the endpoint controller + * @is_enabled: Check if the endpoint controller is enabled or not */ struct mhi_ep_cntrl { struct device *cntrl_dev; @@ -108,6 +115,12 @@ struct mhi_ep_cntrl { u64 ch_ctx_host_pa; u64 ev_ctx_host_pa; u64 cmd_ctx_host_pa; + phys_addr_t ch_ctx_cache_phys; + phys_addr_t ev_ctx_cache_phys; + phys_addr_t cmd_ctx_cache_phys; + size_t ch_ctx_host_size; + size_t ev_ctx_host_size; + size_t cmd_ctx_host_size; struct workqueue_struct *state_wq; struct workqueue_struct *ring_wq; @@ -144,6 +157,7 @@ struct mhi_ep_cntrl { u32 erdb_offset; int index; int irq; + bool is_enabled; }; /** @@ -238,4 +252,12 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl, */ void mhi_ep_unregister_controller(struct mhi_ep_cntrl *mhi_cntrl); +/** + * mhi_ep_power_up - Power up the MHI endpoint stack + * @mhi_cntrl: MHI Endpoint controller + * + * Return: 0 if power up succeeds, a negative error code otherwise. + */ +int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl); + #endif
Add support for MHI endpoint power_up that includes initializing the MMIO and rings, caching the host MHI registers, and setting the MHI state to M0. After registering the MHI EP controller, the stack has to be powered up for usage. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/bus/mhi/ep/internal.h | 6 + drivers/bus/mhi/ep/main.c | 229 ++++++++++++++++++++++++++++++++++ include/linux/mhi_ep.h | 22 ++++ 3 files changed, 257 insertions(+)