| Message ID | 1645804670-21898-2-git-send-email-quic_vpolimer@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Update mdp clk to max supported value to support higher refresh rates | expand |
Quoting Vinod Polimera (2022-02-25 07:57:49) > Kernel clock driver assumes that initial rate is the > max rate for that clock and was not allowing it to scale > beyond the assigned clock value. > > drop the assigned clock rate property and set it > during resume sequence with max value in the opp table. > > Fixes: 62fbdce91("arm64: dts: qcom: sc7280: add display dt nodes") > There shouldn't be a newline here. The fixes tag should be directly attached to the SoB area. > Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 ++------- Can you also update sc7180.dtsi? Are there others SoCs that need an update because they're using an OPP table? Doesn't this need to come after the driver change?
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index baf1653..408cf6c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2856,9 +2856,6 @@ "ahb", "core"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; - assigned-clock-rates = <300000000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; @@ -2892,11 +2889,9 @@ "lut", "core", "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>; - assigned-clock-rates = <300000000>, - <19200000>, + assigned-clock-rates = <19200000>, <19200000>; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmhpd SC7280_CX>;
Kernel clock driver assumes that initial rate is the max rate for that clock and was not allowing it to scale beyond the assigned clock value. drop the assigned clock rate property and set it during resume sequence with max value in the opp table. Fixes: 62fbdce91("arm64: dts: qcom: sc7280: add display dt nodes") Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)