| Message ID | 20220228131435.29207-3-michael.srba@seznam.cz (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v9,1/5] dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks | expand |
On Mon, 28 Feb 2022 14:14:33 +0100, michael.srba@seznam.cz wrote: > From: Michael Srba <Michael.Srba@seznam.cz> > > Adds bindings for the AHB bus which exposes the SSC block in the global > address space. This bus (and the SSC block itself) is present on certain > qcom SoCs. > > In typical configuration, this bus (as some of the clocks and registers > that we need to manipulate) is not accessible to the OS, and the > resources on this bus are indirectly accessed by communicating with a > hexagon CPU core residing in the SSC block. In this configuration, the > hypervisor is the one performing the bus initialization for the purposes > of bringing the haxagon CPU core out of reset. > > However, it is possible to change the configuration, in which case this > binding serves to allow the OS to initialize the bus. > > Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > CHANGES: > - v2: fix issues caught by by dt-schema > - v3: none > - v4: address the issues pointed out in the review > - v5: clarify type of additional properties; remove ssc_tlmm node for now > - v6: none > - v7: fix indentation, use imperative in commit message > - v8: none > - v9: fix typo in commit description; explain what SSC is in the 'decription' section of the binding > --- > .../bindings/bus/qcom,ssc-block-bus.yaml | 147 ++++++++++++++++++ > 1 file changed, 147 insertions(+) > create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.example.dts:39.32-33 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:378: Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1398: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1598879 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Mon, Feb 28, 2022 at 3:15 PM Rob Herring <robh@kernel.org> wrote: > > On Mon, 28 Feb 2022 14:14:33 +0100, michael.srba@seznam.cz wrote: > > From: Michael Srba <Michael.Srba@seznam.cz> > > > > Adds bindings for the AHB bus which exposes the SSC block in the global > > address space. This bus (and the SSC block itself) is present on certain > > qcom SoCs. > > > > In typical configuration, this bus (as some of the clocks and registers > > that we need to manipulate) is not accessible to the OS, and the > > resources on this bus are indirectly accessed by communicating with a > > hexagon CPU core residing in the SSC block. In this configuration, the > > hypervisor is the one performing the bus initialization for the purposes > > of bringing the haxagon CPU core out of reset. > > > > However, it is possible to change the configuration, in which case this > > binding serves to allow the OS to initialize the bus. > > > > Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> > > Reviewed-by: Rob Herring <robh@kernel.org> > > --- > > CHANGES: > > - v2: fix issues caught by by dt-schema > > - v3: none > > - v4: address the issues pointed out in the review > > - v5: clarify type of additional properties; remove ssc_tlmm node for now > > - v6: none > > - v7: fix indentation, use imperative in commit message > > - v8: none > > - v9: fix typo in commit description; explain what SSC is in the 'decription' section of the binding > > --- > > .../bindings/bus/qcom,ssc-block-bus.yaml | 147 ++++++++++++++++++ > > 1 file changed, 147 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Error: Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.example.dts:39.32-33 syntax error > FATAL ERROR: Unable to parse input tree > make[1]: *** [scripts/Makefile.lib:378: Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.example.dt.yaml] Error 1 > make[1]: *** Waiting for unfinished jobs.... > make: *** [Makefile:1398: dt_binding_check] Error 2 This can be ignored I guess as the bot doesn't handle missing cover letter... As I mentioned on v6, you should be sending series with a cover letter. Rob
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml new file mode 100644 index 000000000000..5b9705079015 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs + +maintainers: + - Michael Srba <Michael.Srba@seznam.cz> + +description: | + This binding describes the dependencies (clocks, resets, power domains) which + need to be turned on in a sequence before communication over the AHB bus + becomes possible. + + Additionally, the reg property is used to pass to the driver the location of + two sadly undocumented registers which need to be poked as part of the sequence. + + The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart + controllers, a hexagon core, and a clock controller which provides clocks for + the above. + +properties: + compatible: + items: + - const: qcom,msm8998-ssc-block-bus + - const: qcom,ssc-block-bus + + reg: + description: | + Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1 + registers + minItems: 2 + maxItems: 2 + + reg-names: + items: + - const: mpm_sscaon_config0 + - const: mpm_sscaon_config1 + + '#address-cells': + enum: [ 1, 2 ] + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: xo + - const: aggre2 + - const: gcc_im_sleep + - const: aggre2_north + - const: ssc_xo + - const: ssc_ahbs + + power-domains: + description: Power domain phandles for the ssc_cx and ssc_mx power domains + minItems: 2 + maxItems: 2 + + power-domain-names: + items: + - const: ssc_cx + - const: ssc_mx + + resets: + description: | + Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the + branch control register associated with the ssc_xo and ssc_ahbs clocks) + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: ssc_reset + - const: ssc_bcr + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: describes how to locate the ssc AXI halt register + items: + - items: + - description: Phandle reference to a syscon representing TCSR + - description: offset for the ssc AXI halt register + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + - ranges + - clocks + - clock-names + - power-domains + - power-domain-names + - resets + - reset-names + - qcom,halt-regs + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8998.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + + // devices under this node are physically located in the SSC block, connected to an ssc-internal bus; + ssc_ahb_slave: bus@10ac008 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus"; + reg = <0x10ac008 0x4>, <0x10ac010 0x4>; + reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1"; + + clocks = <&xo>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&gcc GCC_IM_SLEEP>, + <&gcc AGGRE2_SNOC_NORTH_AXI>, + <&gcc SSC_XO>, + <&gcc SSC_CNOC_AHBS_CLK>; + clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs"; + + resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>; + reset-names = "ssc_reset", "ssc_bcr"; + + power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>; + power-domain-names = "ssc_cx", "ssc_mx"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x26000>; + }; + };