diff mbox series

[v2,5/6] arm64: dts: qcom: sm8250: Drop flags for mdss irqs

Message ID 20220302225411.2456001-5-dmitry.baryshkov@linaro.org (mailing list archive)
State Accepted
Headers show
Series [v2,1/6] arm64: dts: qcom: msm8996: Drop flags for mdss irqs | expand

Commit Message

Dmitry Baryshkov March 2, 2022, 10:54 p.m. UTC 
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Abhinav Kumar March 2, 2022, 11:48 p.m. UTC | #1 
On 3/2/2022 2:54 PM, Dmitry Baryshkov wrote:
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
> 
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index fdaf303ba047..956848068871 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3200,7 +3200,7 @@ mdss_mdp: mdp@ae01000 {
>   				power-domains = <&rpmhpd SM8250_MMCX>;
>   
>   				interrupt-parent = <&mdss>;
> -				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <0>;
>   
>   				ports {
>   					#address-cells = <1>;
> @@ -3252,7 +3252,7 @@ dsi0: dsi@ae94000 {
>   				reg-names = "dsi_ctrl";
>   
>   				interrupt-parent = <&mdss>;
> -				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <4>;
>   
>   				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
>   					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> @@ -3325,7 +3325,7 @@ dsi1: dsi@ae96000 {
>   				reg-names = "dsi_ctrl";
>   
>   				interrupt-parent = <&mdss>;
> -				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <5>;
>   
>   				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
>   					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
Marijn Suijten March 3, 2022, 1:03 p.m. UTC | #2 
On 2022-03-03 01:54:10, Dmitry Baryshkov wrote:
> The number of interrupt cells for the mdss interrupt controller is 1,
> meaning there should only be one cell for the interrupt number, not two.
> Drop the second cell containing (unused) irq flags.
> 
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Thanks for adding the Fixes: tag.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>

> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index fdaf303ba047..956848068871 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3200,7 +3200,7 @@ mdss_mdp: mdp@ae01000 {
>  				power-domains = <&rpmhpd SM8250_MMCX>;
>  
>  				interrupt-parent = <&mdss>;
> -				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <0>;
>  
>  				ports {
>  					#address-cells = <1>;
> @@ -3252,7 +3252,7 @@ dsi0: dsi@ae94000 {
>  				reg-names = "dsi_ctrl";
>  
>  				interrupt-parent = <&mdss>;
> -				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <4>;
>  
>  				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
>  					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> @@ -3325,7 +3325,7 @@ dsi1: dsi@ae96000 {
>  				reg-names = "dsi_ctrl";
>  
>  				interrupt-parent = <&mdss>;
> -				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <5>;
>  
>  				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
>  					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fdaf303ba047..956848068871 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3200,7 +3200,7 @@  mdss_mdp: mdp@ae01000 {
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				ports {
 					#address-cells = <1>;
@@ -3252,7 +3252,7 @@  dsi0: dsi@ae94000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3325,7 +3325,7 @@  dsi1: dsi@ae96000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,