| Message ID | 20220228123019.382037-8-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Fix dtbs_check warning(s) for Qualcomm QMP PHY | expand |
On Mon, Feb 28, 2022 at 06:00:18PM +0530, Bhupesh Sharma wrote: > Currently the qcom,qmp-phy dt-binding doesn't describe > the 'reg' and '#phy-cells' properties for the phy@ subnode. > > Fix the same. > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Rob Herring <robh@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > index 70e7cd75e173..f8a43acd229a 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > @@ -115,6 +115,13 @@ patternProperties: > Each device node of QMP phy is required to have as many child nodes as > the number of lanes the PHY has. > properties: > + reg: > + minItems: 1 > + maxItems: 6 > + > + "#phy-cells": > + const: 0 > + > "#clock-cells": > enum: [ 0, 1, 2 ] While you are at it, what about these properties? clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; Shawn
On Mon, Feb 28, 2022 at 06:00:18PM +0530, Bhupesh Sharma wrote: > Currently the qcom,qmp-phy dt-binding doesn't describe > the 'reg' and '#phy-cells' properties for the phy@ subnode. > > Fix the same. > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Rob Herring <robh@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > index 70e7cd75e173..f8a43acd229a 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > @@ -115,6 +115,13 @@ patternProperties: > Each device node of QMP phy is required to have as many child nodes as > the number of lanes the PHY has. > properties: > + reg: > + minItems: 1 > + maxItems: 6 You need to define what each entry is. > + > + "#phy-cells": > + const: 0 > + > "#clock-cells": > enum: [ 0, 1, 2 ] > > -- > 2.35.1 > >
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index 70e7cd75e173..f8a43acd229a 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -115,6 +115,13 @@ patternProperties: Each device node of QMP phy is required to have as many child nodes as the number of lanes the PHY has. properties: + reg: + minItems: 1 + maxItems: 6 + + "#phy-cells": + const: 0 + "#clock-cells": enum: [ 0, 1, 2 ]
Currently the qcom,qmp-phy dt-binding doesn't describe the 'reg' and '#phy-cells' properties for the phy@ subnode. Fix the same. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 7 +++++++ 1 file changed, 7 insertions(+)