diff mbox series

[3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data

Message ID 20220304080348.218581-3-krzysztof.kozlowski@canonical.com (mailing list archive)
State New, archived
Headers show
Series [1/7] tty: serial: samsung: embed s3c24xx_uart_info in parent structure | expand

Commit Message

Krzysztof Kozlowski March 4, 2022, 8:03 a.m. UTC 
The driver data (struct s3c24xx_serial_drv_data) is only used to
initialize the driver properly and is not modified.  Make it const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
 drivers/tty/serial/samsung_tty.c | 139 +++++++++++++++----------------
 1 file changed, 69 insertions(+), 70 deletions(-)

Comments

Jiri Slaby March 7, 2022, 6:36 a.m. UTC | #1 
On 04. 03. 22, 9:03, Krzysztof Kozlowski wrote:
> The driver data (struct s3c24xx_serial_drv_data) is only used to
> initialize the driver properly and is not modified.  Make it const.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
...
> @@ -2726,13 +2726,13 @@ static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
>   		.ufcon		= S3C2410_UFCON_DEFAULT,
>   	},
>   };
> -#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
> +#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data)
>   #else
> -#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
> +#define S3C6400_SERIAL_DRV_DATA (NULL)
>   #endif
>   
>   #ifdef CONFIG_CPU_S5PV210
> -static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
> +static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>   	.info = {
>   		.name		= "Samsung S5PV210 UART",
>   		.type		= TYPE_S3C6400,
> @@ -2755,9 +2755,9 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>   	},
>   	.fifosize = { 256, 64, 16, 16 },
>   };
> -#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
> +#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data)
>   #else
> -#define S5PV210_SERIAL_DRV_DATA	(kernel_ulong_t)NULL
> +#define S5PV210_SERIAL_DRV_DATA	(NULL)


All these changes are somehow irrelevant to the subject/to this patch. 
Care to put them into a separate patch?

There is no need to put NULL into parentheses.

> @@ -3062,7 +3062,6 @@ static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
>   OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup);
>   #endif
>   
> -MODULE_ALIAS("platform:samsung-uart");

This is as well a different change to what is claimed.

thanks,
Krzysztof Kozlowski March 7, 2022, 7:48 a.m. UTC | #2 
On 07/03/2022 07:36, Jiri Slaby wrote:
> On 04. 03. 22, 9:03, Krzysztof Kozlowski wrote:
>> The driver data (struct s3c24xx_serial_drv_data) is only used to
>> initialize the driver properly and is not modified.  Make it const.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ...
>> @@ -2726,13 +2726,13 @@ static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
>>   		.ufcon		= S3C2410_UFCON_DEFAULT,
>>   	},
>>   };
>> -#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
>> +#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data)
>>   #else
>> -#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
>> +#define S3C6400_SERIAL_DRV_DATA (NULL)
>>   #endif
>>   
>>   #ifdef CONFIG_CPU_S5PV210
>> -static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>> +static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>>   	.info = {
>>   		.name		= "Samsung S5PV210 UART",
>>   		.type		= TYPE_S3C6400,
>> @@ -2755,9 +2755,9 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
>>   	},
>>   	.fifosize = { 256, 64, 16, 16 },
>>   };
>> -#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
>> +#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data)
>>   #else
>> -#define S5PV210_SERIAL_DRV_DATA	(kernel_ulong_t)NULL
>> +#define S5PV210_SERIAL_DRV_DATA	(NULL)
> 
> 
> All these changes are somehow irrelevant to the subject/to this patch. 
> Care to put them into a separate patch?
> 
> There is no need to put NULL into parentheses.

I wanted to make it consistent with the other, but indeed I can skip it.

> 
>> @@ -3062,7 +3062,6 @@ static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
>>   OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup);
>>   #endif
>>   
>> -MODULE_ALIAS("platform:samsung-uart");
> 
> This is as well a different change to what is claimed.

D'oh, this was not intended. Thanks for spotting it.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index a9a75b5b9705..0b4f40044e87 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -136,14 +136,14 @@  struct s3c24xx_uart_port {
 	unsigned int			tx_mode;
 	unsigned int			rx_mode;
 
-	struct s3c24xx_uart_info	*info;
+	const struct s3c24xx_uart_info	*info;
 	struct clk			*clk;
 	struct clk			*baudclk;
 	struct uart_port		port;
-	struct s3c24xx_serial_drv_data	*drv_data;
+	const struct s3c24xx_serial_drv_data	*drv_data;
 
 	/* reference to platform data */
-	struct s3c2410_uartcfg		*cfg;
+	const struct s3c2410_uartcfg	*cfg;
 
 	struct s3c24xx_uart_dma		*dma;
 
@@ -221,7 +221,7 @@  static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
 	local_irq_restore(flags);
 }
 
-static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
+static inline struct s3c24xx_uart_port *to_ourport(const struct uart_port *port)
 {
 	return container_of(port, struct s3c24xx_uart_port, port);
 }
@@ -573,13 +573,13 @@  static void s3c24xx_serial_stop_rx(struct uart_port *port)
 	}
 }
 
-static inline struct s3c24xx_uart_info
+static inline const struct s3c24xx_uart_info
 	*s3c24xx_port_to_info(struct uart_port *port)
 {
 	return to_ourport(port)->info;
 }
 
-static inline struct s3c2410_uartcfg
+static inline const struct s3c2410_uartcfg
 	*s3c24xx_port_to_cfg(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport;
@@ -594,7 +594,7 @@  static inline struct s3c2410_uartcfg
 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
 				     unsigned long ufstat)
 {
-	struct s3c24xx_uart_info *info = ourport->info;
+	const struct s3c24xx_uart_info *info = ourport->info;
 
 	if (ufstat & info->rx_fifofull)
 		return ourport->port.fifosize;
@@ -986,7 +986,7 @@  static irqreturn_t apple_serial_handle_irq(int irq, void *id)
 
 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 {
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 	unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
 	unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
 
@@ -1405,7 +1405,7 @@  static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
 
 static inline int s3c24xx_serial_getsource(struct uart_port *port)
 {
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 	unsigned int ucon;
 
 	if (info->num_clks == 1)
@@ -1419,7 +1419,7 @@  static inline int s3c24xx_serial_getsource(struct uart_port *port)
 static void s3c24xx_serial_setsource(struct uart_port *port,
 			unsigned int clk_sel)
 {
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 	unsigned int ucon;
 
 	if (info->num_clks == 1)
@@ -1438,7 +1438,7 @@  static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 			unsigned int req_baud, struct clk **best_clk,
 			unsigned int *clk_num)
 {
-	struct s3c24xx_uart_info *info = ourport->info;
+	const struct s3c24xx_uart_info *info = ourport->info;
 	struct clk *clk;
 	unsigned long rate;
 	unsigned int cnt, baud, quot, best_quot = 0;
@@ -1522,7 +1522,7 @@  static void s3c24xx_serial_set_termios(struct uart_port *port,
 				       struct ktermios *termios,
 				       struct ktermios *old)
 {
-	struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+	const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	struct clk *clk = ERR_PTR(-EINVAL);
 	unsigned long flags;
@@ -1691,7 +1691,7 @@  static const char *s3c24xx_serial_type(struct uart_port *port)
 
 static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
 {
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 
 	if (flags & UART_CONFIG_TYPE)
 		port->type = info->port_type;
@@ -1703,7 +1703,7 @@  static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
 static int
 s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 
 	if (ser->type != PORT_UNKNOWN && ser->type != info->port_type)
 		return -EINVAL;
@@ -1873,9 +1873,9 @@  s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
  */
 
 static void s3c24xx_serial_resetport(struct uart_port *port,
-				   struct s3c2410_uartcfg *cfg)
+				     const struct s3c2410_uartcfg *cfg)
 {
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 	unsigned long ucon = rd_regl(port, S3C2410_UCON);
 
 	ucon &= (info->clksel_mask | info->ucon_mask);
@@ -1979,7 +1979,7 @@  s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
 static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
 {
 	struct device *dev = ourport->port.dev;
-	struct s3c24xx_uart_info *info = ourport->info;
+	const struct s3c24xx_uart_info *info = ourport->info;
 	char clk_name[MAX_CLK_NAME_LENGTH];
 	unsigned int clk_sel;
 	struct clk *clk;
@@ -2021,7 +2021,7 @@  static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 				    struct platform_device *platdev)
 {
 	struct uart_port *port = &ourport->port;
-	struct s3c2410_uartcfg *cfg = ourport->cfg;
+	const struct s3c2410_uartcfg *cfg = ourport->cfg;
 	struct resource *res;
 	int ret;
 
@@ -2156,7 +2156,7 @@  static const struct of_device_id s3c24xx_uart_dt_match[];
 
 static int probe_index;
 
-static inline struct s3c24xx_serial_drv_data *
+static inline const struct s3c24xx_serial_drv_data *
 s3c24xx_get_driver_data(struct platform_device *pdev)
 {
 #ifdef CONFIG_OF
@@ -2419,7 +2419,7 @@  static struct uart_port *cons_uart;
 static int
 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
 {
-	struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 	unsigned long ufstat, utrstat;
 
 	if (ufcon & S3C2410_UFCON_FIFOMODE) {
@@ -2615,7 +2615,7 @@  static struct console s3c24xx_serial_console = {
 #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
 
 #ifdef CONFIG_CPU_S3C2410
-static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
 	.info = {
 		.name		= "Samsung S3C2410 UART",
 		.type		= TYPE_S3C24XX,
@@ -2637,13 +2637,13 @@  static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
 		.ufcon		= S3C2410_UFCON_DEFAULT,
 	},
 };
-#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
+#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data)
 #else
-#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C2410_SERIAL_DRV_DATA (NULL)
 #endif
 
 #ifdef CONFIG_CPU_S3C2412
-static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
 	.info = {
 		.name		= "Samsung S3C2412 UART",
 		.type		= TYPE_S3C24XX,
@@ -2666,14 +2666,14 @@  static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
 		.ufcon		= S3C2410_UFCON_DEFAULT,
 	},
 };
-#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
+#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data)
 #else
-#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C2412_SERIAL_DRV_DATA (NULL)
 #endif
 
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
 	defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
-static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
 	.info = {
 		.name		= "Samsung S3C2440 UART",
 		.type		= TYPE_S3C24XX,
@@ -2697,13 +2697,13 @@  static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
 		.ufcon		= S3C2410_UFCON_DEFAULT,
 	},
 };
-#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
+#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data)
 #else
-#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C2440_SERIAL_DRV_DATA (NULL)
 #endif
 
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
 	.info = {
 		.name		= "Samsung S3C6400 UART",
 		.type		= TYPE_S3C6400,
@@ -2726,13 +2726,13 @@  static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
 		.ufcon		= S3C2410_UFCON_DEFAULT,
 	},
 };
-#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
+#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data)
 #else
-#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C6400_SERIAL_DRV_DATA (NULL)
 #endif
 
 #ifdef CONFIG_CPU_S5PV210
-static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 	.info = {
 		.name		= "Samsung S5PV210 UART",
 		.type		= TYPE_S3C6400,
@@ -2755,9 +2755,9 @@  static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 	},
 	.fifosize = { 256, 64, 16, 16 },
 };
-#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
+#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data)
 #else
-#define S5PV210_SERIAL_DRV_DATA	(kernel_ulong_t)NULL
+#define S5PV210_SERIAL_DRV_DATA	(NULL)
 #endif
 
 #if defined(CONFIG_ARCH_EXYNOS)
@@ -2784,33 +2784,33 @@  static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 		.has_fracval	= 1,				\
 	}							\
 
-static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
 	EXYNOS_COMMON_SERIAL_DRV_DATA(),
 	.fifosize = { 256, 64, 16, 16 },
 };
 
-static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
 	EXYNOS_COMMON_SERIAL_DRV_DATA(),
 	.fifosize = { 64, 256, 16, 256 },
 };
 
-static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
 	EXYNOS_COMMON_SERIAL_DRV_DATA(),
 	.fifosize = { 256, 64, 64, 64 },
 };
 
-#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
-#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
-#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos850_serial_drv_data)
+#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
+#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
+#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
 
 #else
-#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
-#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
-#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#define EXYNOS4210_SERIAL_DRV_DATA (NULL)
+#define EXYNOS5433_SERIAL_DRV_DATA (NULL)
+#define EXYNOS850_SERIAL_DRV_DATA (NULL)
 #endif
 
 #ifdef CONFIG_ARCH_APPLE
-static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
 	.info = {
 		.name		= "Apple S5L UART",
 		.type		= TYPE_APPLE_S5L,
@@ -2832,39 +2832,39 @@  static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
 		.ufcon		= S3C2410_UFCON_DEFAULT,
 	},
 };
-#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data)
+#define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data)
 #else
-#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#define S5L_SERIAL_DRV_DATA (NULL)
 #endif
 
 static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	{
 		.name		= "s3c2410-uart",
-		.driver_data	= S3C2410_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA,
 	}, {
 		.name		= "s3c2412-uart",
-		.driver_data	= S3C2412_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA,
 	}, {
 		.name		= "s3c2440-uart",
-		.driver_data	= S3C2440_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA,
 	}, {
 		.name		= "s3c6400-uart",
-		.driver_data	= S3C6400_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
 	}, {
 		.name		= "s5pv210-uart",
-		.driver_data	= S5PV210_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)S5PV210_SERIAL_DRV_DATA,
 	}, {
 		.name		= "exynos4210-uart",
-		.driver_data	= EXYNOS4210_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA,
 	}, {
 		.name		= "exynos5433-uart",
-		.driver_data	= EXYNOS5433_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA,
 	}, {
 		.name		= "s5l-uart",
-		.driver_data	= S5L_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)S5L_SERIAL_DRV_DATA,
 	}, {
 		.name		= "exynos850-uart",
-		.driver_data	= EXYNOS850_SERIAL_DRV_DATA,
+		.driver_data	= (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA,
 	},
 	{ },
 };
@@ -2873,23 +2873,23 @@  MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
 #ifdef CONFIG_OF
 static const struct of_device_id s3c24xx_uart_dt_match[] = {
 	{ .compatible = "samsung,s3c2410-uart",
-		.data = (void *)S3C2410_SERIAL_DRV_DATA },
+		.data = S3C2410_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,s3c2412-uart",
-		.data = (void *)S3C2412_SERIAL_DRV_DATA },
+		.data = S3C2412_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,s3c2440-uart",
-		.data = (void *)S3C2440_SERIAL_DRV_DATA },
+		.data = S3C2440_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,s3c6400-uart",
-		.data = (void *)S3C6400_SERIAL_DRV_DATA },
+		.data = S3C6400_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,s5pv210-uart",
-		.data = (void *)S5PV210_SERIAL_DRV_DATA },
+		.data = S5PV210_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,exynos4210-uart",
-		.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+		.data = EXYNOS4210_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,exynos5433-uart",
-		.data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
+		.data = EXYNOS5433_SERIAL_DRV_DATA },
 	{ .compatible = "apple,s5l-uart",
-		.data = (void *)S5L_SERIAL_DRV_DATA },
+		.data = S5L_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,exynos850-uart",
-		.data = (void *)EXYNOS850_SERIAL_DRV_DATA },
+		.data = EXYNOS850_SERIAL_DRV_DATA },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
@@ -2935,7 +2935,7 @@  module_exit(samsung_serial_exit);
  * Early console.
  */
 
-static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
+static void wr_reg_barrier(const struct uart_port *port, u32 reg, u32 val)
 {
 	switch (port->iotype) {
 	case UPIO_MEM:
@@ -2951,15 +2951,15 @@  struct samsung_early_console_data {
 	u32 txfull_mask;
 };
 
-static void samsung_early_busyuart(struct uart_port *port)
+static void samsung_early_busyuart(const struct uart_port *port)
 {
 	while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE))
 		;
 }
 
-static void samsung_early_busyuart_fifo(struct uart_port *port)
+static void samsung_early_busyuart_fifo(const struct uart_port *port)
 {
-	struct samsung_early_console_data *data = port->private_data;
+	const struct samsung_early_console_data *data = port->private_data;
 
 	while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask)
 		;
@@ -3062,7 +3062,6 @@  static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
 OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup);
 #endif
 
-MODULE_ALIAS("platform:samsung-uart");
 MODULE_DESCRIPTION("Samsung SoC Serial port driver");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL v2");