Message ID | 20220307150609.10662-3-jane.malalane@citrix.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | xen: Report and use hardware APIC virtualization capabilities | expand |
On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: > Introduce a new per-domain creation x86 specific flag to > select whether hardware assisted virtualization should be used for > x{2}APIC. > > A per-domain option is added to xl in order to select the usage of > x{2}APIC hardware assisted virtualization, as well as a global > configuration option. > > Having all APIC interaction exit to Xen for emulation is slow and can > induce much overhead. Hardware can speed up x{2}APIC by decoding the > APIC access and providing a VM exit with a more specific exit reason > than a regular EPT fault or by altogether avoiding a VM exit. > > On the other hand, being able to disable x{2}APIC hardware assisted > virtualization can be useful for testing and debugging purposes. > > Note: vmx_install_vlapic_mapping doesn't require modifications > regardless of whether the guest has "Virtualize APIC accesses" enabled > or not, i.e., setting the APIC_ACCESS_ADDR VMCS field is fine so long > as virtualize_apic_accesses is supported by the CPU. > > Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> > Signed-off-by: Jane Malalane <jane.malalane@citrix.com> > --- > CC: Wei Liu <wl@xen.org> > CC: Anthony PERARD <anthony.perard@citrix.com> > CC: Juergen Gross <jgross@suse.com> > CC: Andrew Cooper <andrew.cooper3@citrix.com> > CC: George Dunlap <george.dunlap@citrix.com> > CC: Jan Beulich <jbeulich@suse.com> > CC: Julien Grall <julien@xen.org> > CC: Stefano Stabellini <sstabellini@kernel.org> > CC: Christian Lindig <christian.lindig@citrix.com> > CC: David Scott <dave@recoil.org> > CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com> > CC: "Roger Pau Monné" <roger.pau@citrix.com> > > v5: > * Revert v4 changes in vmx_vlapic_msr_changed(), preserving the use of > the has_assisted_x{2}apic macros > * Following changes in assisted_x{2}apic_available definitions in > patch 1, retighten conditionals for setting > XEN_HVM_CPUID_APIC_ACCESS_VIRT and XEN_HVM_CPUID_X2APIC_VIRT in > cpuid_hypervisor_leaves() > > v4: > * Add has_assisted_x{2}apic macros and use them where appropriate > * Replace CPU checks with per-domain assisted_x{2}apic control > options in vmx_vlapic_msr_changed() and cpuid_hypervisor_leaves(), > following edits to assisted_x{2}apic_available definitions in > patch 1 > Note: new assisted_x{2}apic_available definitions make later > cpu_has_vmx_apic_reg_virt and cpu_has_vmx_virtual_intr_delivery > checks redundant in vmx_vlapic_msr_changed() > > v3: > * Change info in xl.cfg to better express reality and fix > capitalization of x{2}apic > * Move "physinfo" variable definition to the beggining of > libxl__domain_build_info_setdefault() > * Reposition brackets in if statement to match libxl coding style > * Shorten logic in libxl__arch_domain_build_info_setdefault() > * Correct dprintk message in arch_sanitise_domain_config() > * Make appropriate changes in vmx_vlapic_msr_changed() and > cpuid_hypervisor_leaves() for amended "assisted_x2apic" bit > * Remove unneeded parantheses > > v2: > * Add a LIBXL_HAVE_ASSISTED_APIC macro > * Pass xcpyshinfo as a pointer in libxl__arch_get_physinfo > * Add a return statement in now "int" > libxl__arch_domain_build_info_setdefault() > * Preserve libxl__arch_domain_build_info_setdefault 's location in > libxl_create.c > * Correct x{2}apic default setting logic in > libxl__arch_domain_prepare_config() > * Correct logic for parsing assisted_x{2}apic host/guest options in > xl_parse.c and initialize them to -1 in xl.c > * Use guest options directly in vmx_vlapic_msr_changed > * Fix indentation of bool assisted_x{2}apic in struct hvm_domain > * Add a change in xenctrl_stubs.c to pass xenctrl ABI checks > --- > docs/man/xl.cfg.5.pod.in | 19 +++++++++++++++++++ > docs/man/xl.conf.5.pod.in | 12 ++++++++++++ > tools/golang/xenlight/helpers.gen.go | 12 ++++++++++++ > tools/golang/xenlight/types.gen.go | 2 ++ > tools/include/libxl.h | 7 +++++++ > tools/libs/light/libxl_arch.h | 5 +++-- > tools/libs/light/libxl_arm.c | 7 +++++-- > tools/libs/light/libxl_create.c | 22 +++++++++++++--------- > tools/libs/light/libxl_types.idl | 2 ++ > tools/libs/light/libxl_x86.c | 28 ++++++++++++++++++++++++++-- > tools/ocaml/libs/xc/xenctrl.ml | 2 ++ > tools/ocaml/libs/xc/xenctrl.mli | 2 ++ > tools/ocaml/libs/xc/xenctrl_stubs.c | 2 +- > tools/xl/xl.c | 8 ++++++++ > tools/xl/xl.h | 2 ++ > tools/xl/xl_parse.c | 16 ++++++++++++++++ > xen/arch/x86/domain.c | 28 +++++++++++++++++++++++++++- > xen/arch/x86/hvm/vmx/vmcs.c | 4 ++++ > xen/arch/x86/hvm/vmx/vmx.c | 13 ++++--------- > xen/arch/x86/include/asm/hvm/domain.h | 6 ++++++ > xen/arch/x86/include/asm/hvm/vmx/vmcs.h | 3 +++ > xen/arch/x86/traps.c | 9 +++++---- > xen/include/public/arch-x86/xen.h | 2 ++ > 23 files changed, 183 insertions(+), 30 deletions(-) > > diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in > index b98d161398..dcca564a23 100644 > --- a/docs/man/xl.cfg.5.pod.in > +++ b/docs/man/xl.cfg.5.pod.in > @@ -1862,6 +1862,25 @@ firmware tables when using certain older guest Operating > Systems. These tables have been superseded by newer constructs within > the ACPI tables. > > +=item B<assisted_xapic=BOOLEAN> > + > +B<(x86 only)> Enables or disables hardware assisted virtualization for > +xAPIC. With this option enabled, a memory-mapped APIC access will be > +decoded by hardware and either issue a more specific VM exit than just > +an EPT fault, or altogether avoid a VM exit. Notice full > +virtualization for xAPIC can only be achieved if hardware supports > +“APIC-register virtualization” and “virtual-interrupt delivery”. You shouldn't mention “APIC-register virtualization” or “virtual-interrupt delivery”, as those are Intel specific options. I would just remove that sentence (same below). > The > +default is settable via L<xl.conf(5)>. > + > +=item B<assisted_x2apic=BOOLEAN> > + > +B<(x86 only)> Enables or disables hardware assisted virtualization for > +x2APIC. With this option enabled, an MSR-Based APIC access will > +either issue a VM exit or altogether avoid one. "With this option enabled, certain accesses to MSR APIC registers will avoid a VM exit into the hypervisor." > Notice full > +virtualization for x2APIC can only be achieved if hardware supports > +“APIC-register virtualization” and “virtual-interrupt delivery”. The > +default is settable via L<xl.conf(5)>. > + > =item B<nx=BOOLEAN> > > B<(x86 only)> Hides or exposes the No-eXecute capability. This allows a guest > diff --git a/docs/man/xl.conf.5.pod.in b/docs/man/xl.conf.5.pod.in > index df20c08137..95d136d1ea 100644 > --- a/docs/man/xl.conf.5.pod.in > +++ b/docs/man/xl.conf.5.pod.in > @@ -107,6 +107,18 @@ Sets the default value for the C<max_grant_version> domain config value. > > Default: maximum grant version supported by the hypervisor. > > +=item B<assisted_xapic=BOOLEAN> > + > +If enabled, domains will use xAPIC hardware assisted virtualization by default. > + > +Default: enabled if supported. > + > +=item B<assisted_x2apic=BOOLEAN> > + > +If enabled, domains will use x2APIC hardware assisted virtualization by default. > + > +Default: enabled if supported. > + > =item B<vif.default.script="PATH"> > > Configures the default hotplug script used by virtual network devices. > diff --git a/tools/golang/xenlight/helpers.gen.go b/tools/golang/xenlight/helpers.gen.go > index dd4e6c9f14..dece545ee0 100644 > --- a/tools/golang/xenlight/helpers.gen.go > +++ b/tools/golang/xenlight/helpers.gen.go > @@ -1120,6 +1120,12 @@ x.ArchArm.Vuart = VuartType(xc.arch_arm.vuart) > if err := x.ArchX86.MsrRelaxed.fromC(&xc.arch_x86.msr_relaxed);err != nil { > return fmt.Errorf("converting field ArchX86.MsrRelaxed: %v", err) > } > +if err := x.ArchX86.AssistedXapic.fromC(&xc.arch_x86.assisted_xapic);err != nil { > +return fmt.Errorf("converting field ArchX86.AssistedXapic: %v", err) > +} > +if err := x.ArchX86.AssistedX2Apic.fromC(&xc.arch_x86.assisted_x2apic);err != nil { > +return fmt.Errorf("converting field ArchX86.AssistedX2Apic: %v", err) > +} > x.Altp2M = Altp2MMode(xc.altp2m) > x.VmtraceBufKb = int(xc.vmtrace_buf_kb) > if err := x.Vpmu.fromC(&xc.vpmu);err != nil { > @@ -1605,6 +1611,12 @@ xc.arch_arm.vuart = C.libxl_vuart_type(x.ArchArm.Vuart) > if err := x.ArchX86.MsrRelaxed.toC(&xc.arch_x86.msr_relaxed); err != nil { > return fmt.Errorf("converting field ArchX86.MsrRelaxed: %v", err) > } > +if err := x.ArchX86.AssistedXapic.toC(&xc.arch_x86.assisted_xapic); err != nil { > +return fmt.Errorf("converting field ArchX86.AssistedXapic: %v", err) > +} > +if err := x.ArchX86.AssistedX2Apic.toC(&xc.arch_x86.assisted_x2apic); err != nil { > +return fmt.Errorf("converting field ArchX86.AssistedX2Apic: %v", err) > +} > xc.altp2m = C.libxl_altp2m_mode(x.Altp2M) > xc.vmtrace_buf_kb = C.int(x.VmtraceBufKb) > if err := x.Vpmu.toC(&xc.vpmu); err != nil { > diff --git a/tools/golang/xenlight/types.gen.go b/tools/golang/xenlight/types.gen.go > index 87be46c745..253c9ad93d 100644 > --- a/tools/golang/xenlight/types.gen.go > +++ b/tools/golang/xenlight/types.gen.go > @@ -520,6 +520,8 @@ Vuart VuartType > } > ArchX86 struct { > MsrRelaxed Defbool > +AssistedXapic Defbool > +AssistedX2Apic Defbool > } > Altp2M Altp2MMode > VmtraceBufKb int > diff --git a/tools/include/libxl.h b/tools/include/libxl.h > index 94e6355822..cdcccd6d01 100644 > --- a/tools/include/libxl.h > +++ b/tools/include/libxl.h > @@ -535,6 +535,13 @@ > #define LIBXL_HAVE_PHYSINFO_ASSISTED_APIC 1 > > /* > + * LIBXL_HAVE_ASSISTED_APIC indicates that libxl_domain_build_info has > + * assisted_xapic and assisted_x2apic fields for enabling hardware > + * assisted virtualization for x{2}apic per domain. > + */ > +#define LIBXL_HAVE_ASSISTED_APIC 1 > + > +/* > * libxl ABI compatibility > * > * The only guarantee which libxl makes regarding ABI compatibility > diff --git a/tools/libs/light/libxl_arch.h b/tools/libs/light/libxl_arch.h > index 207ceac6a1..03b89929e6 100644 > --- a/tools/libs/light/libxl_arch.h > +++ b/tools/libs/light/libxl_arch.h > @@ -71,8 +71,9 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, > libxl_domain_create_info *c_info); > > _hidden > -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, > - libxl_domain_build_info *b_info); > +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, > + libxl_domain_build_info *b_info, > + const libxl_physinfo *physinfo); > > _hidden > int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, > diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c > index 39fdca1b49..ba5b8f433f 100644 > --- a/tools/libs/light/libxl_arm.c > +++ b/tools/libs/light/libxl_arm.c > @@ -1384,8 +1384,9 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, > } > } > > -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, > - libxl_domain_build_info *b_info) > +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, > + libxl_domain_build_info *b_info, > + const libxl_physinfo *physinfo) > { > /* ACPI is disabled by default */ > libxl_defbool_setdefault(&b_info->acpi, false); > @@ -1399,6 +1400,8 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, > memset(&b_info->u, '\0', sizeof(b_info->u)); > b_info->type = LIBXL_DOMAIN_TYPE_INVALID; > libxl_domain_build_info_init_type(b_info, LIBXL_DOMAIN_TYPE_PVH); > + > + return 0; > } > > int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, > diff --git a/tools/libs/light/libxl_create.c b/tools/libs/light/libxl_create.c > index 15ed021f41..88d08d7277 100644 > --- a/tools/libs/light/libxl_create.c > +++ b/tools/libs/light/libxl_create.c > @@ -75,6 +75,7 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, > libxl_domain_build_info *b_info) > { > int i, rc; > + libxl_physinfo info; > > if (b_info->type != LIBXL_DOMAIN_TYPE_HVM && > b_info->type != LIBXL_DOMAIN_TYPE_PV && > @@ -264,7 +265,18 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, > if (!b_info->event_channels) > b_info->event_channels = 1023; > > - libxl__arch_domain_build_info_setdefault(gc, b_info); > + rc = libxl_get_physinfo(CTX, &info); > + if (rc) { > + LOG(ERROR, "failed to get hypervisor info"); > + return rc; > + } > + > + rc = libxl__arch_domain_build_info_setdefault(gc, b_info, &info); > + if (rc) { > + LOG(ERROR, "unable to set domain arch build info defaults"); > + return rc; > + } > + > libxl_defbool_setdefault(&b_info->dm_restrict, false); > > if (b_info->iommu_memkb == LIBXL_MEMKB_DEFAULT) > @@ -457,14 +469,6 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, > } > > if (b_info->max_grant_version == LIBXL_MAX_GRANT_DEFAULT) { > - libxl_physinfo info; > - > - rc = libxl_get_physinfo(CTX, &info); > - if (rc) { > - LOG(ERROR, "failed to get hypervisor info"); > - return rc; > - } > - > if (info.cap_gnttab_v2) > b_info->max_grant_version = 2; > else if (info.cap_gnttab_v1) > diff --git a/tools/libs/light/libxl_types.idl b/tools/libs/light/libxl_types.idl > index 42ac6c357b..db5eb0a0b3 100644 > --- a/tools/libs/light/libxl_types.idl > +++ b/tools/libs/light/libxl_types.idl > @@ -648,6 +648,8 @@ libxl_domain_build_info = Struct("domain_build_info",[ > ("vuart", libxl_vuart_type), > ])), > ("arch_x86", Struct(None, [("msr_relaxed", libxl_defbool), > + ("assisted_xapic", libxl_defbool), > + ("assisted_x2apic", libxl_defbool), > ])), > # Alternate p2m is not bound to any architecture or guest type, as it is > # supported by x86 HVM and ARM support is planned. > diff --git a/tools/libs/light/libxl_x86.c b/tools/libs/light/libxl_x86.c > index e0a06ecfe3..c377d13b19 100644 > --- a/tools/libs/light/libxl_x86.c > +++ b/tools/libs/light/libxl_x86.c > @@ -23,6 +23,14 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc, > if (libxl_defbool_val(d_config->b_info.arch_x86.msr_relaxed)) > config->arch.misc_flags |= XEN_X86_MSR_RELAXED; > > + if (d_config->c_info.type != LIBXL_DOMAIN_TYPE_PV) > + { > + if (libxl_defbool_val(d_config->b_info.arch_x86.assisted_xapic)) > + config->arch.misc_flags |= XEN_X86_ASSISTED_XAPIC; > + > + if (libxl_defbool_val(d_config->b_info.arch_x86.assisted_x2apic)) > + config->arch.misc_flags |= XEN_X86_ASSISTED_X2APIC; > + } > return 0; > } > > @@ -819,11 +827,27 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, > { > } > > -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, > - libxl_domain_build_info *b_info) > +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, > + libxl_domain_build_info *b_info, > + const libxl_physinfo *physinfo) > { > libxl_defbool_setdefault(&b_info->acpi, true); > libxl_defbool_setdefault(&b_info->arch_x86.msr_relaxed, false); > + > + if (b_info->type != LIBXL_DOMAIN_TYPE_PV) { > + libxl_defbool_setdefault(&b_info->arch_x86.assisted_xapic, > + physinfo->cap_assisted_xapic); > + libxl_defbool_setdefault(&b_info->arch_x86.assisted_x2apic, > + physinfo->cap_assisted_x2apic); > + } > + Extra newline? 'else if' should be one space after the closing bracket. > + else if (!libxl_defbool_is_default(b_info->arch_x86.assisted_xapic) || > + !libxl_defbool_is_default(b_info->arch_x86.assisted_x2apic)) { > + LOG(ERROR, "Interrupt Controller Virtualization not supported for PV"); > + return ERROR_INVAL; > + } > + > + return 0; > } > > int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, > diff --git a/tools/ocaml/libs/xc/xenctrl.ml b/tools/ocaml/libs/xc/xenctrl.ml > index 21783d3622..672a11ceb6 100644 > --- a/tools/ocaml/libs/xc/xenctrl.ml > +++ b/tools/ocaml/libs/xc/xenctrl.ml > @@ -50,6 +50,8 @@ type x86_arch_emulation_flags = > > type x86_arch_misc_flags = > | X86_MSR_RELAXED > + | X86_ASSISTED_XAPIC > + | X86_ASSISTED_X2APIC > > type xen_x86_arch_domainconfig = > { > diff --git a/tools/ocaml/libs/xc/xenctrl.mli b/tools/ocaml/libs/xc/xenctrl.mli > index af6ba3d1a0..f9a6aa3a0f 100644 > --- a/tools/ocaml/libs/xc/xenctrl.mli > +++ b/tools/ocaml/libs/xc/xenctrl.mli > @@ -44,6 +44,8 @@ type x86_arch_emulation_flags = > > type x86_arch_misc_flags = > | X86_MSR_RELAXED > + | X86_ASSISTED_XAPIC > + | X86_ASSISTED_X2APIC > > type xen_x86_arch_domainconfig = { > emulation_flags: x86_arch_emulation_flags list; > diff --git a/tools/ocaml/libs/xc/xenctrl_stubs.c b/tools/ocaml/libs/xc/xenctrl_stubs.c > index e0d49b18d2..ecfc7125d5 100644 > --- a/tools/ocaml/libs/xc/xenctrl_stubs.c > +++ b/tools/ocaml/libs/xc/xenctrl_stubs.c > @@ -239,7 +239,7 @@ CAMLprim value stub_xc_domain_create(value xch, value wanted_domid, value config > > cfg.arch.misc_flags = ocaml_list_to_c_bitmap > /* ! x86_arch_misc_flags X86_ none */ > - /* ! XEN_X86_ XEN_X86_MSR_RELAXED all */ > + /* ! XEN_X86_ XEN_X86_ASSISTED_X2APIC max */ > (VAL_MISC_FLAGS); > > #undef VAL_MISC_FLAGS > diff --git a/tools/xl/xl.c b/tools/xl/xl.c > index 2d1ec18ea3..31eb223309 100644 > --- a/tools/xl/xl.c > +++ b/tools/xl/xl.c > @@ -57,6 +57,8 @@ int max_grant_frames = -1; > int max_maptrack_frames = -1; > int max_grant_version = LIBXL_MAX_GRANT_DEFAULT; > libxl_domid domid_policy = INVALID_DOMID; > +int assisted_xapic = -1; > +int assisted_x2apic = -1; > > xentoollog_level minmsglevel = minmsglevel_default; > > @@ -201,6 +203,12 @@ static void parse_global_config(const char *configfile, > if (!xlu_cfg_get_long (config, "claim_mode", &l, 0)) > claim_mode = l; > > + if (!xlu_cfg_get_long (config, "assisted_xapic", &l, 0)) > + assisted_xapic = l; > + > + if (!xlu_cfg_get_long (config, "assisted_x2apic", &l, 0)) > + assisted_x2apic = l; > + > xlu_cfg_replace_string (config, "remus.default.netbufscript", > &default_remus_netbufscript, 0); > xlu_cfg_replace_string (config, "colo.default.proxyscript", > diff --git a/tools/xl/xl.h b/tools/xl/xl.h > index c5c4bedbdd..528deb3feb 100644 > --- a/tools/xl/xl.h > +++ b/tools/xl/xl.h > @@ -286,6 +286,8 @@ extern libxl_bitmap global_vm_affinity_mask; > extern libxl_bitmap global_hvm_affinity_mask; > extern libxl_bitmap global_pv_affinity_mask; > extern libxl_domid domid_policy; > +extern int assisted_xapic; > +extern int assisted_x2apic; > > enum output_format { > OUTPUT_FORMAT_JSON, > diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c > index 117fcdcb2b..0ab9b145fe 100644 > --- a/tools/xl/xl_parse.c > +++ b/tools/xl/xl_parse.c > @@ -1681,6 +1681,22 @@ void parse_config_data(const char *config_source, > xlu_cfg_get_defbool(config, "vpt_align", &b_info->u.hvm.vpt_align, 0); > xlu_cfg_get_defbool(config, "apic", &b_info->apic, 0); > > + e = xlu_cfg_get_long(config, "assisted_xapic", &l , 0); > + if ((e == ESRCH && assisted_xapic != -1)) /* use global default if present */ > + libxl_defbool_set(&b_info->arch_x86.assisted_xapic, assisted_xapic); > + else if (!e) > + libxl_defbool_set(&b_info->arch_x86.assisted_xapic, l); > + else > + exit(1); > + > + e = xlu_cfg_get_long(config, "assisted_x2apic", &l, 0); > + if ((e == ESRCH && assisted_x2apic != -1)) /* use global default if present */ > + libxl_defbool_set(&b_info->arch_x86.assisted_x2apic, assisted_x2apic); > + else if (!e) > + libxl_defbool_set(&b_info->arch_x86.assisted_x2apic, l); > + else > + exit(1); > + > switch (xlu_cfg_get_list(config, "viridian", > &viridian, &num_viridian, 1)) > { > diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c > index a5048ed654..bcca0dc900 100644 > --- a/xen/arch/x86/domain.c > +++ b/xen/arch/x86/domain.c > @@ -619,6 +619,8 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) > bool hvm = config->flags & XEN_DOMCTL_CDF_hvm; > bool hap = config->flags & XEN_DOMCTL_CDF_hap; > bool nested_virt = config->flags & XEN_DOMCTL_CDF_nested_virt; > + bool assisted_xapic = config->arch.misc_flags & XEN_X86_ASSISTED_XAPIC; > + bool assisted_x2apic = config->arch.misc_flags & XEN_X86_ASSISTED_X2APIC; > unsigned int max_vcpus; > > if ( hvm ? !hvm_enabled : !IS_ENABLED(CONFIG_PV) ) > @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) > } > } > > - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) > + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | > + XEN_X86_ASSISTED_XAPIC | > + XEN_X86_ASSISTED_X2APIC) ) > { > dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", > config->arch.misc_flags); > return -EINVAL; > } > > + if ( (assisted_xapic || assisted_x2apic) && !hvm ) > + { > + dprintk(XENLOG_INFO, > + "Interrupt Controller Virtualization not supported for PV\n"); > + return -EINVAL; > + } > + > + if ( (assisted_xapic && !assisted_xapic_available) || > + (assisted_x2apic && !assisted_x2apic_available) ) > + { > + dprintk(XENLOG_INFO, > + "Hardware assisted x%sAPIC requested but not available\n", > + assisted_xapic && !assisted_xapic_available ? "" : "2"); > + return -EINVAL; I think for those two you could return -ENODEV if others agree. > + } > + > return 0; > } > > @@ -864,6 +884,12 @@ int arch_domain_create(struct domain *d, > > d->arch.msr_relaxed = config->arch.misc_flags & XEN_X86_MSR_RELAXED; > > + d->arch.hvm.assisted_xapic = > + config->arch.misc_flags & XEN_X86_ASSISTED_XAPIC; > + > + d->arch.hvm.assisted_x2apic = > + config->arch.misc_flags & XEN_X86_ASSISTED_X2APIC; > + > return 0; > > fail: > diff --git a/xen/arch/x86/hvm/vmx/vmcs.c b/xen/arch/x86/hvm/vmx/vmcs.c > index 06831099ed..e4503a02a7 100644 > --- a/xen/arch/x86/hvm/vmx/vmcs.c > +++ b/xen/arch/x86/hvm/vmx/vmcs.c > @@ -1157,6 +1157,10 @@ static int construct_vmcs(struct vcpu *v) > __vmwrite(PLE_WINDOW, ple_window); > } > > + if ( !has_assisted_xapic(v->domain) ) > + v->arch.hvm.vmx.secondary_exec_control &= > + ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; > + > if ( cpu_has_vmx_secondary_exec_control ) > __vmwrite(SECONDARY_VM_EXEC_CONTROL, > v->arch.hvm.vmx.secondary_exec_control); > diff --git a/xen/arch/x86/hvm/vmx/vmx.c b/xen/arch/x86/hvm/vmx/vmx.c > index c075370f64..949ddd684c 100644 > --- a/xen/arch/x86/hvm/vmx/vmx.c > +++ b/xen/arch/x86/hvm/vmx/vmx.c > @@ -3344,16 +3344,11 @@ static void vmx_install_vlapic_mapping(struct vcpu *v) > > void vmx_vlapic_msr_changed(struct vcpu *v) > { > - int virtualize_x2apic_mode; > struct vlapic *vlapic = vcpu_vlapic(v); > unsigned int msr; > > - virtualize_x2apic_mode = ( (cpu_has_vmx_apic_reg_virt || > - cpu_has_vmx_virtual_intr_delivery) && > - cpu_has_vmx_virtualize_x2apic_mode ); > - > - if ( !cpu_has_vmx_virtualize_apic_accesses && > - !virtualize_x2apic_mode ) > + if ( !has_assisted_xapic(v->domain) && > + !has_assisted_x2apic(v->domain) ) > return; > > vmx_vmcs_enter(v); > @@ -3363,7 +3358,7 @@ void vmx_vlapic_msr_changed(struct vcpu *v) > if ( !vlapic_hw_disabled(vlapic) && > (vlapic_base_address(vlapic) == APIC_DEFAULT_PHYS_BASE) ) > { > - if ( virtualize_x2apic_mode && vlapic_x2apic_mode(vlapic) ) > + if ( has_assisted_x2apic(v->domain) && vlapic_x2apic_mode(vlapic) ) > { > v->arch.hvm.vmx.secondary_exec_control |= > SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE; > @@ -3384,7 +3379,7 @@ void vmx_vlapic_msr_changed(struct vcpu *v) > vmx_clear_msr_intercept(v, MSR_X2APIC_SELF, VMX_MSR_W); > } > } > - else > + else if ( has_assisted_xapic(v->domain) ) > v->arch.hvm.vmx.secondary_exec_control |= > SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; > } > diff --git a/xen/arch/x86/include/asm/hvm/domain.h b/xen/arch/x86/include/asm/hvm/domain.h > index 698455444e..92bf53483c 100644 > --- a/xen/arch/x86/include/asm/hvm/domain.h > +++ b/xen/arch/x86/include/asm/hvm/domain.h > @@ -117,6 +117,12 @@ struct hvm_domain { > > bool is_s3_suspended; > > + /* xAPIC hardware assisted virtualization. */ > + bool assisted_xapic; > + > + /* x2APIC hardware assisted virtualization. */ > + bool assisted_x2apic; > + > /* hypervisor intercepted msix table */ > struct list_head msixtbl_list; > > diff --git a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > index 9119aa8536..5b7d662ed7 100644 > --- a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > +++ b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > @@ -220,6 +220,9 @@ void vmx_vmcs_reload(struct vcpu *v); > #define CPU_BASED_ACTIVATE_SECONDARY_CONTROLS 0x80000000 > extern u32 vmx_cpu_based_exec_control; > > +#define has_assisted_xapic(d) ((d)->arch.hvm.assisted_xapic) > +#define has_assisted_x2apic(d) ((d)->arch.hvm.assisted_x2apic) Those macros should not be in an Intel specific header, arch/x86/include/asm/hvm/domain.h is likely a better place. > + > #define PIN_BASED_EXT_INTR_MASK 0x00000001 > #define PIN_BASED_NMI_EXITING 0x00000008 > #define PIN_BASED_VIRTUAL_NMIS 0x00000020 > diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c > index a2278d9499..a0c6b89a88 100644 > --- a/xen/arch/x86/traps.c > +++ b/xen/arch/x86/traps.c > @@ -1121,7 +1121,8 @@ void cpuid_hypervisor_leaves(const struct vcpu *v, uint32_t leaf, > if ( !is_hvm_domain(d) || subleaf != 0 ) > break; > > - if ( cpu_has_vmx_apic_reg_virt ) > + if ( cpu_has_vmx_apic_reg_virt && > + has_assisted_xapic(d) ) > res->a |= XEN_HVM_CPUID_APIC_ACCESS_VIRT; > > /* > @@ -1130,9 +1131,9 @@ void cpuid_hypervisor_leaves(const struct vcpu *v, uint32_t leaf, > * and wrmsr in the guest will run without VMEXITs (see > * vmx_vlapic_msr_changed()). > */ > - if ( cpu_has_vmx_virtualize_x2apic_mode && > - cpu_has_vmx_apic_reg_virt && > - cpu_has_vmx_virtual_intr_delivery ) > + if ( cpu_has_vmx_apic_reg_virt && > + cpu_has_vmx_virtual_intr_delivery && > + has_assisted_x2apic(d) ) This will result in less code changes if you just replace cpu_has_vmx_virtualize_x2apic_mode with has_assisted_x2apic(d). Thanks, Roger.
On 08.03.2022 12:38, Roger Pau Monné wrote: > On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >> } >> } >> >> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) >> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | >> + XEN_X86_ASSISTED_XAPIC | >> + XEN_X86_ASSISTED_X2APIC) ) >> { >> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", >> config->arch.misc_flags); >> return -EINVAL; >> } >> >> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) >> + { >> + dprintk(XENLOG_INFO, >> + "Interrupt Controller Virtualization not supported for PV\n"); >> + return -EINVAL; >> + } >> + >> + if ( (assisted_xapic && !assisted_xapic_available) || >> + (assisted_x2apic && !assisted_x2apic_available) ) >> + { >> + dprintk(XENLOG_INFO, >> + "Hardware assisted x%sAPIC requested but not available\n", >> + assisted_xapic && !assisted_xapic_available ? "" : "2"); >> + return -EINVAL; > > I think for those two you could return -ENODEV if others agree. If by "two" you mean the xAPIC and x2APIC aspects here (and not e.g. this and the earlier if()), then I agree. I'm always in favor of using distinct error codes when possible and at least halfway sensible. Jan
On Tue, Mar 08, 2022 at 01:24:23PM +0100, Jan Beulich wrote: > On 08.03.2022 12:38, Roger Pau Monné wrote: > > On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: > >> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) > >> } > >> } > >> > >> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) > >> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | > >> + XEN_X86_ASSISTED_XAPIC | > >> + XEN_X86_ASSISTED_X2APIC) ) > >> { > >> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", > >> config->arch.misc_flags); > >> return -EINVAL; > >> } > >> > >> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) > >> + { > >> + dprintk(XENLOG_INFO, > >> + "Interrupt Controller Virtualization not supported for PV\n"); > >> + return -EINVAL; > >> + } > >> + > >> + if ( (assisted_xapic && !assisted_xapic_available) || > >> + (assisted_x2apic && !assisted_x2apic_available) ) > >> + { > >> + dprintk(XENLOG_INFO, > >> + "Hardware assisted x%sAPIC requested but not available\n", > >> + assisted_xapic && !assisted_xapic_available ? "" : "2"); > >> + return -EINVAL; > > > > I think for those two you could return -ENODEV if others agree. > > If by "two" you mean the xAPIC and x2APIC aspects here (and not e.g. this > and the earlier if()), then I agree. I'm always in favor of using distinct > error codes when possible and at least halfway sensible. I would be fine by using it for the !hvm if also. IMO it makes sense as PV doesn't have an APIC 'device' at all, so ENODEV would seem fitting. EINVAL is also fine as the caller shouldn't even attempt that in the first place. So let's use it for the last if only. Thanks, Roger.
On 08/03/2022 12:33, Roger Pau Monné wrote: > On Tue, Mar 08, 2022 at 01:24:23PM +0100, Jan Beulich wrote: >> On 08.03.2022 12:38, Roger Pau Monné wrote: >>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >>>> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >>>> } >>>> } >>>> >>>> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) >>>> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | >>>> + XEN_X86_ASSISTED_XAPIC | >>>> + XEN_X86_ASSISTED_X2APIC) ) >>>> { >>>> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", >>>> config->arch.misc_flags); >>>> return -EINVAL; >>>> } >>>> >>>> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) >>>> + { >>>> + dprintk(XENLOG_INFO, >>>> + "Interrupt Controller Virtualization not supported for PV\n"); >>>> + return -EINVAL; >>>> + } >>>> + >>>> + if ( (assisted_xapic && !assisted_xapic_available) || >>>> + (assisted_x2apic && !assisted_x2apic_available) ) >>>> + { >>>> + dprintk(XENLOG_INFO, >>>> + "Hardware assisted x%sAPIC requested but not available\n", >>>> + assisted_xapic && !assisted_xapic_available ? "" : "2"); >>>> + return -EINVAL; >>> >>> I think for those two you could return -ENODEV if others agree. >> >> If by "two" you mean the xAPIC and x2APIC aspects here (and not e.g. this >> and the earlier if()), then I agree. I'm always in favor of using distinct >> error codes when possible and at least halfway sensible. > > I would be fine by using it for the !hvm if also. IMO it makes sense > as PV doesn't have an APIC 'device' at all, so ENODEV would seem > fitting. EINVAL is also fine as the caller shouldn't even attempt that > in the first place. > > So let's use it for the last if only. Wouldn't it make more sense to use -ENODEV particularly for the first? I agree that -ENODEV should be reported in the first case because it doesn't make sense to request acceleration of something that doesn't exist and I should have put that. But having a look at the hap code (since it resembles the second case), it returns -EINVAL when it is not available, unless you deem this to be different or, in retrospective, that the hap code should too have been coded to return -ENODEV. if ( hap && !hvm_hap_supported() ) { dprintk(XENLOG_INFO, "HAP requested but not available\n"); return -EINVAL; } I agree with all the other comments and have made the approp changes for v6. Thanks a lot. Jane.
On 08.03.2022 15:31, Jane Malalane wrote: > On 08/03/2022 12:33, Roger Pau Monné wrote: >> On Tue, Mar 08, 2022 at 01:24:23PM +0100, Jan Beulich wrote: >>> On 08.03.2022 12:38, Roger Pau Monné wrote: >>>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >>>>> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >>>>> } >>>>> } >>>>> >>>>> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) >>>>> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | >>>>> + XEN_X86_ASSISTED_XAPIC | >>>>> + XEN_X86_ASSISTED_X2APIC) ) >>>>> { >>>>> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", >>>>> config->arch.misc_flags); >>>>> return -EINVAL; >>>>> } >>>>> >>>>> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) >>>>> + { >>>>> + dprintk(XENLOG_INFO, >>>>> + "Interrupt Controller Virtualization not supported for PV\n"); >>>>> + return -EINVAL; >>>>> + } >>>>> + >>>>> + if ( (assisted_xapic && !assisted_xapic_available) || >>>>> + (assisted_x2apic && !assisted_x2apic_available) ) >>>>> + { >>>>> + dprintk(XENLOG_INFO, >>>>> + "Hardware assisted x%sAPIC requested but not available\n", >>>>> + assisted_xapic && !assisted_xapic_available ? "" : "2"); >>>>> + return -EINVAL; >>>> >>>> I think for those two you could return -ENODEV if others agree. >>> >>> If by "two" you mean the xAPIC and x2APIC aspects here (and not e.g. this >>> and the earlier if()), then I agree. I'm always in favor of using distinct >>> error codes when possible and at least halfway sensible. >> >> I would be fine by using it for the !hvm if also. IMO it makes sense >> as PV doesn't have an APIC 'device' at all, so ENODEV would seem >> fitting. EINVAL is also fine as the caller shouldn't even attempt that >> in the first place. >> >> So let's use it for the last if only. > Wouldn't it make more sense to use -ENODEV particularly for the first? I > agree that -ENODEV should be reported in the first case because it > doesn't make sense to request acceleration of something that doesn't > exist and I should have put that. But having a look at the hap code > (since it resembles the second case), it returns -EINVAL when it is not > available, unless you deem this to be different or, in retrospective, > that the hap code should too have been coded to return -ENODEV. > > if ( hap && !hvm_hap_supported() ) > { > dprintk(XENLOG_INFO, "HAP requested but not available\n"); > return -EINVAL; > } This is just one of the examples where using -ENODEV as you suggest would introduce an inconsistency. We use -EINVAL also for other purely guest-type dependent checks. Jan
On 08/03/2022 11:38, Roger Pau Monné wrote: > On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >> Introduce a new per-domain creation x86 specific flag to >> select whether hardware assisted virtualization should be used for >> x{2}APIC. >> >> A per-domain option is added to xl in order to select the usage of >> x{2}APIC hardware assisted virtualization, as well as a global >> configuration option. >> >> Having all APIC interaction exit to Xen for emulation is slow and can >> induce much overhead. Hardware can speed up x{2}APIC by decoding the >> APIC access and providing a VM exit with a more specific exit reason >> than a regular EPT fault or by altogether avoiding a VM exit. >> >> On the other hand, being able to disable x{2}APIC hardware assisted >> virtualization can be useful for testing and debugging purposes. >> >> Note: vmx_install_vlapic_mapping doesn't require modifications >> regardless of whether the guest has "Virtualize APIC accesses" enabled >> or not, i.e., setting the APIC_ACCESS_ADDR VMCS field is fine so long >> as virtualize_apic_accesses is supported by the CPU. >> >> Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> >> Signed-off-by: Jane Malalane <jane.malalane@citrix.com> >> --- >> CC: Wei Liu <wl@xen.org> >> CC: Anthony PERARD <anthony.perard@citrix.com> >> CC: Juergen Gross <jgross@suse.com> >> CC: Andrew Cooper <andrew.cooper3@citrix.com> >> CC: George Dunlap <george.dunlap@citrix.com> >> CC: Jan Beulich <jbeulich@suse.com> >> CC: Julien Grall <julien@xen.org> >> CC: Stefano Stabellini <sstabellini@kernel.org> >> CC: Christian Lindig <christian.lindig@citrix.com> >> CC: David Scott <dave@recoil.org> >> CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com> >> CC: "Roger Pau Monné" <roger.pau@citrix.com> >> >> v5: >> * Revert v4 changes in vmx_vlapic_msr_changed(), preserving the use of >> the has_assisted_x{2}apic macros >> * Following changes in assisted_x{2}apic_available definitions in >> patch 1, retighten conditionals for setting >> XEN_HVM_CPUID_APIC_ACCESS_VIRT and XEN_HVM_CPUID_X2APIC_VIRT in >> cpuid_hypervisor_leaves() >> >> v4: >> * Add has_assisted_x{2}apic macros and use them where appropriate >> * Replace CPU checks with per-domain assisted_x{2}apic control >> options in vmx_vlapic_msr_changed() and cpuid_hypervisor_leaves(), >> following edits to assisted_x{2}apic_available definitions in >> patch 1 >> Note: new assisted_x{2}apic_available definitions make later >> cpu_has_vmx_apic_reg_virt and cpu_has_vmx_virtual_intr_delivery >> checks redundant in vmx_vlapic_msr_changed() >> >> v3: >> * Change info in xl.cfg to better express reality and fix >> capitalization of x{2}apic >> * Move "physinfo" variable definition to the beggining of >> libxl__domain_build_info_setdefault() >> * Reposition brackets in if statement to match libxl coding style >> * Shorten logic in libxl__arch_domain_build_info_setdefault() >> * Correct dprintk message in arch_sanitise_domain_config() >> * Make appropriate changes in vmx_vlapic_msr_changed() and >> cpuid_hypervisor_leaves() for amended "assisted_x2apic" bit >> * Remove unneeded parantheses >> >> v2: >> * Add a LIBXL_HAVE_ASSISTED_APIC macro >> * Pass xcpyshinfo as a pointer in libxl__arch_get_physinfo >> * Add a return statement in now "int" >> libxl__arch_domain_build_info_setdefault() >> * Preserve libxl__arch_domain_build_info_setdefault 's location in >> libxl_create.c >> * Correct x{2}apic default setting logic in >> libxl__arch_domain_prepare_config() >> * Correct logic for parsing assisted_x{2}apic host/guest options in >> xl_parse.c and initialize them to -1 in xl.c >> * Use guest options directly in vmx_vlapic_msr_changed >> * Fix indentation of bool assisted_x{2}apic in struct hvm_domain >> * Add a change in xenctrl_stubs.c to pass xenctrl ABI checks >> --- >> docs/man/xl.cfg.5.pod.in | 19 +++++++++++++++++++ >> docs/man/xl.conf.5.pod.in | 12 ++++++++++++ >> tools/golang/xenlight/helpers.gen.go | 12 ++++++++++++ >> tools/golang/xenlight/types.gen.go | 2 ++ >> tools/include/libxl.h | 7 +++++++ >> tools/libs/light/libxl_arch.h | 5 +++-- >> tools/libs/light/libxl_arm.c | 7 +++++-- >> tools/libs/light/libxl_create.c | 22 +++++++++++++--------- >> tools/libs/light/libxl_types.idl | 2 ++ >> tools/libs/light/libxl_x86.c | 28 ++++++++++++++++++++++++++-- >> tools/ocaml/libs/xc/xenctrl.ml | 2 ++ >> tools/ocaml/libs/xc/xenctrl.mli | 2 ++ >> tools/ocaml/libs/xc/xenctrl_stubs.c | 2 +- >> tools/xl/xl.c | 8 ++++++++ >> tools/xl/xl.h | 2 ++ >> tools/xl/xl_parse.c | 16 ++++++++++++++++ >> xen/arch/x86/domain.c | 28 +++++++++++++++++++++++++++- >> xen/arch/x86/hvm/vmx/vmcs.c | 4 ++++ >> xen/arch/x86/hvm/vmx/vmx.c | 13 ++++--------- >> xen/arch/x86/include/asm/hvm/domain.h | 6 ++++++ >> xen/arch/x86/include/asm/hvm/vmx/vmcs.h | 3 +++ >> xen/arch/x86/traps.c | 9 +++++---- >> xen/include/public/arch-x86/xen.h | 2 ++ >> 23 files changed, 183 insertions(+), 30 deletions(-) >> >> diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in >> index b98d161398..dcca564a23 100644 >> --- a/docs/man/xl.cfg.5.pod.in >> +++ b/docs/man/xl.cfg.5.pod.in >> @@ -1862,6 +1862,25 @@ firmware tables when using certain older guest Operating >> Systems. These tables have been superseded by newer constructs within >> the ACPI tables. >> >> +=item B<assisted_xapic=BOOLEAN> >> + >> +B<(x86 only)> Enables or disables hardware assisted virtualization for >> +xAPIC. With this option enabled, a memory-mapped APIC access will be >> +decoded by hardware and either issue a more specific VM exit than just >> +an EPT fault, or altogether avoid a VM exit. Notice full >> +virtualization for xAPIC can only be achieved if hardware supports >> +“APIC-register virtualization” and “virtual-interrupt delivery”. > > You shouldn't mention “APIC-register virtualization” or > “virtual-interrupt delivery”, as those are Intel specific options. I > would just remove that sentence (same below). > >> The >> +default is settable via L<xl.conf(5)>. >> + >> +=item B<assisted_x2apic=BOOLEAN> >> + >> +B<(x86 only)> Enables or disables hardware assisted virtualization for >> +x2APIC. With this option enabled, an MSR-Based APIC access will >> +either issue a VM exit or altogether avoid one. > > "With this option enabled, certain accesses to MSR APIC registers will > avoid a VM exit into the hypervisor." > >> Notice full >> +virtualization for x2APIC can only be achieved if hardware supports >> +“APIC-register virtualization” and “virtual-interrupt delivery”. The >> +default is settable via L<xl.conf(5)>. >> + >> =item B<nx=BOOLEAN> >> >> B<(x86 only)> Hides or exposes the No-eXecute capability. This allows a guest >> diff --git a/docs/man/xl.conf.5.pod.in b/docs/man/xl.conf.5.pod.in >> index df20c08137..95d136d1ea 100644 >> --- a/docs/man/xl.conf.5.pod.in >> +++ b/docs/man/xl.conf.5.pod.in >> @@ -107,6 +107,18 @@ Sets the default value for the C<max_grant_version> domain config value. >> >> Default: maximum grant version supported by the hypervisor. >> >> +=item B<assisted_xapic=BOOLEAN> >> + >> +If enabled, domains will use xAPIC hardware assisted virtualization by default. >> + >> +Default: enabled if supported. >> + >> +=item B<assisted_x2apic=BOOLEAN> >> + >> +If enabled, domains will use x2APIC hardware assisted virtualization by default. >> + >> +Default: enabled if supported. >> + >> =item B<vif.default.script="PATH"> >> >> Configures the default hotplug script used by virtual network devices. >> diff --git a/tools/golang/xenlight/helpers.gen.go b/tools/golang/xenlight/helpers.gen.go >> index dd4e6c9f14..dece545ee0 100644 >> --- a/tools/golang/xenlight/helpers.gen.go >> +++ b/tools/golang/xenlight/helpers.gen.go >> @@ -1120,6 +1120,12 @@ x.ArchArm.Vuart = VuartType(xc.arch_arm.vuart) >> if err := x.ArchX86.MsrRelaxed.fromC(&xc.arch_x86.msr_relaxed);err != nil { >> return fmt.Errorf("converting field ArchX86.MsrRelaxed: %v", err) >> } >> +if err := x.ArchX86.AssistedXapic.fromC(&xc.arch_x86.assisted_xapic);err != nil { >> +return fmt.Errorf("converting field ArchX86.AssistedXapic: %v", err) >> +} >> +if err := x.ArchX86.AssistedX2Apic.fromC(&xc.arch_x86.assisted_x2apic);err != nil { >> +return fmt.Errorf("converting field ArchX86.AssistedX2Apic: %v", err) >> +} >> x.Altp2M = Altp2MMode(xc.altp2m) >> x.VmtraceBufKb = int(xc.vmtrace_buf_kb) >> if err := x.Vpmu.fromC(&xc.vpmu);err != nil { >> @@ -1605,6 +1611,12 @@ xc.arch_arm.vuart = C.libxl_vuart_type(x.ArchArm.Vuart) >> if err := x.ArchX86.MsrRelaxed.toC(&xc.arch_x86.msr_relaxed); err != nil { >> return fmt.Errorf("converting field ArchX86.MsrRelaxed: %v", err) >> } >> +if err := x.ArchX86.AssistedXapic.toC(&xc.arch_x86.assisted_xapic); err != nil { >> +return fmt.Errorf("converting field ArchX86.AssistedXapic: %v", err) >> +} >> +if err := x.ArchX86.AssistedX2Apic.toC(&xc.arch_x86.assisted_x2apic); err != nil { >> +return fmt.Errorf("converting field ArchX86.AssistedX2Apic: %v", err) >> +} >> xc.altp2m = C.libxl_altp2m_mode(x.Altp2M) >> xc.vmtrace_buf_kb = C.int(x.VmtraceBufKb) >> if err := x.Vpmu.toC(&xc.vpmu); err != nil { >> diff --git a/tools/golang/xenlight/types.gen.go b/tools/golang/xenlight/types.gen.go >> index 87be46c745..253c9ad93d 100644 >> --- a/tools/golang/xenlight/types.gen.go >> +++ b/tools/golang/xenlight/types.gen.go >> @@ -520,6 +520,8 @@ Vuart VuartType >> } >> ArchX86 struct { >> MsrRelaxed Defbool >> +AssistedXapic Defbool >> +AssistedX2Apic Defbool >> } >> Altp2M Altp2MMode >> VmtraceBufKb int >> diff --git a/tools/include/libxl.h b/tools/include/libxl.h >> index 94e6355822..cdcccd6d01 100644 >> --- a/tools/include/libxl.h >> +++ b/tools/include/libxl.h >> @@ -535,6 +535,13 @@ >> #define LIBXL_HAVE_PHYSINFO_ASSISTED_APIC 1 >> >> /* >> + * LIBXL_HAVE_ASSISTED_APIC indicates that libxl_domain_build_info has >> + * assisted_xapic and assisted_x2apic fields for enabling hardware >> + * assisted virtualization for x{2}apic per domain. >> + */ >> +#define LIBXL_HAVE_ASSISTED_APIC 1 >> + >> +/* >> * libxl ABI compatibility >> * >> * The only guarantee which libxl makes regarding ABI compatibility >> diff --git a/tools/libs/light/libxl_arch.h b/tools/libs/light/libxl_arch.h >> index 207ceac6a1..03b89929e6 100644 >> --- a/tools/libs/light/libxl_arch.h >> +++ b/tools/libs/light/libxl_arch.h >> @@ -71,8 +71,9 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, >> libxl_domain_create_info *c_info); >> >> _hidden >> -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, >> - libxl_domain_build_info *b_info); >> +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, >> + libxl_domain_build_info *b_info, >> + const libxl_physinfo *physinfo); >> >> _hidden >> int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, >> diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c >> index 39fdca1b49..ba5b8f433f 100644 >> --- a/tools/libs/light/libxl_arm.c >> +++ b/tools/libs/light/libxl_arm.c >> @@ -1384,8 +1384,9 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, >> } >> } >> >> -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, >> - libxl_domain_build_info *b_info) >> +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, >> + libxl_domain_build_info *b_info, >> + const libxl_physinfo *physinfo) >> { >> /* ACPI is disabled by default */ >> libxl_defbool_setdefault(&b_info->acpi, false); >> @@ -1399,6 +1400,8 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, >> memset(&b_info->u, '\0', sizeof(b_info->u)); >> b_info->type = LIBXL_DOMAIN_TYPE_INVALID; >> libxl_domain_build_info_init_type(b_info, LIBXL_DOMAIN_TYPE_PVH); >> + >> + return 0; >> } >> >> int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, >> diff --git a/tools/libs/light/libxl_create.c b/tools/libs/light/libxl_create.c >> index 15ed021f41..88d08d7277 100644 >> --- a/tools/libs/light/libxl_create.c >> +++ b/tools/libs/light/libxl_create.c >> @@ -75,6 +75,7 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, >> libxl_domain_build_info *b_info) >> { >> int i, rc; >> + libxl_physinfo info; >> >> if (b_info->type != LIBXL_DOMAIN_TYPE_HVM && >> b_info->type != LIBXL_DOMAIN_TYPE_PV && >> @@ -264,7 +265,18 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, >> if (!b_info->event_channels) >> b_info->event_channels = 1023; >> >> - libxl__arch_domain_build_info_setdefault(gc, b_info); >> + rc = libxl_get_physinfo(CTX, &info); >> + if (rc) { >> + LOG(ERROR, "failed to get hypervisor info"); >> + return rc; >> + } >> + >> + rc = libxl__arch_domain_build_info_setdefault(gc, b_info, &info); >> + if (rc) { >> + LOG(ERROR, "unable to set domain arch build info defaults"); >> + return rc; >> + } >> + >> libxl_defbool_setdefault(&b_info->dm_restrict, false); >> >> if (b_info->iommu_memkb == LIBXL_MEMKB_DEFAULT) >> @@ -457,14 +469,6 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, >> } >> >> if (b_info->max_grant_version == LIBXL_MAX_GRANT_DEFAULT) { >> - libxl_physinfo info; >> - >> - rc = libxl_get_physinfo(CTX, &info); >> - if (rc) { >> - LOG(ERROR, "failed to get hypervisor info"); >> - return rc; >> - } >> - >> if (info.cap_gnttab_v2) >> b_info->max_grant_version = 2; >> else if (info.cap_gnttab_v1) >> diff --git a/tools/libs/light/libxl_types.idl b/tools/libs/light/libxl_types.idl >> index 42ac6c357b..db5eb0a0b3 100644 >> --- a/tools/libs/light/libxl_types.idl >> +++ b/tools/libs/light/libxl_types.idl >> @@ -648,6 +648,8 @@ libxl_domain_build_info = Struct("domain_build_info",[ >> ("vuart", libxl_vuart_type), >> ])), >> ("arch_x86", Struct(None, [("msr_relaxed", libxl_defbool), >> + ("assisted_xapic", libxl_defbool), >> + ("assisted_x2apic", libxl_defbool), >> ])), >> # Alternate p2m is not bound to any architecture or guest type, as it is >> # supported by x86 HVM and ARM support is planned. >> diff --git a/tools/libs/light/libxl_x86.c b/tools/libs/light/libxl_x86.c >> index e0a06ecfe3..c377d13b19 100644 >> --- a/tools/libs/light/libxl_x86.c >> +++ b/tools/libs/light/libxl_x86.c >> @@ -23,6 +23,14 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc, >> if (libxl_defbool_val(d_config->b_info.arch_x86.msr_relaxed)) >> config->arch.misc_flags |= XEN_X86_MSR_RELAXED; >> >> + if (d_config->c_info.type != LIBXL_DOMAIN_TYPE_PV) >> + { >> + if (libxl_defbool_val(d_config->b_info.arch_x86.assisted_xapic)) >> + config->arch.misc_flags |= XEN_X86_ASSISTED_XAPIC; >> + >> + if (libxl_defbool_val(d_config->b_info.arch_x86.assisted_x2apic)) >> + config->arch.misc_flags |= XEN_X86_ASSISTED_X2APIC; >> + } >> return 0; >> } >> >> @@ -819,11 +827,27 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, >> { >> } >> >> -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, >> - libxl_domain_build_info *b_info) >> +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, >> + libxl_domain_build_info *b_info, >> + const libxl_physinfo *physinfo) >> { >> libxl_defbool_setdefault(&b_info->acpi, true); >> libxl_defbool_setdefault(&b_info->arch_x86.msr_relaxed, false); >> + >> + if (b_info->type != LIBXL_DOMAIN_TYPE_PV) { >> + libxl_defbool_setdefault(&b_info->arch_x86.assisted_xapic, >> + physinfo->cap_assisted_xapic); >> + libxl_defbool_setdefault(&b_info->arch_x86.assisted_x2apic, >> + physinfo->cap_assisted_x2apic); >> + } >> + > > Extra newline? 'else if' should be one space after the closing > bracket. > >> + else if (!libxl_defbool_is_default(b_info->arch_x86.assisted_xapic) || >> + !libxl_defbool_is_default(b_info->arch_x86.assisted_x2apic)) { >> + LOG(ERROR, "Interrupt Controller Virtualization not supported for PV"); >> + return ERROR_INVAL; >> + } >> + >> + return 0; >> } >> >> int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, >> diff --git a/tools/ocaml/libs/xc/xenctrl.ml b/tools/ocaml/libs/xc/xenctrl.ml >> index 21783d3622..672a11ceb6 100644 >> --- a/tools/ocaml/libs/xc/xenctrl.ml >> +++ b/tools/ocaml/libs/xc/xenctrl.ml >> @@ -50,6 +50,8 @@ type x86_arch_emulation_flags = >> >> type x86_arch_misc_flags = >> | X86_MSR_RELAXED >> + | X86_ASSISTED_XAPIC >> + | X86_ASSISTED_X2APIC >> >> type xen_x86_arch_domainconfig = >> { >> diff --git a/tools/ocaml/libs/xc/xenctrl.mli b/tools/ocaml/libs/xc/xenctrl.mli >> index af6ba3d1a0..f9a6aa3a0f 100644 >> --- a/tools/ocaml/libs/xc/xenctrl.mli >> +++ b/tools/ocaml/libs/xc/xenctrl.mli >> @@ -44,6 +44,8 @@ type x86_arch_emulation_flags = >> >> type x86_arch_misc_flags = >> | X86_MSR_RELAXED >> + | X86_ASSISTED_XAPIC >> + | X86_ASSISTED_X2APIC >> >> type xen_x86_arch_domainconfig = { >> emulation_flags: x86_arch_emulation_flags list; >> diff --git a/tools/ocaml/libs/xc/xenctrl_stubs.c b/tools/ocaml/libs/xc/xenctrl_stubs.c >> index e0d49b18d2..ecfc7125d5 100644 >> --- a/tools/ocaml/libs/xc/xenctrl_stubs.c >> +++ b/tools/ocaml/libs/xc/xenctrl_stubs.c >> @@ -239,7 +239,7 @@ CAMLprim value stub_xc_domain_create(value xch, value wanted_domid, value config >> >> cfg.arch.misc_flags = ocaml_list_to_c_bitmap >> /* ! x86_arch_misc_flags X86_ none */ >> - /* ! XEN_X86_ XEN_X86_MSR_RELAXED all */ >> + /* ! XEN_X86_ XEN_X86_ASSISTED_X2APIC max */ >> (VAL_MISC_FLAGS); >> >> #undef VAL_MISC_FLAGS >> diff --git a/tools/xl/xl.c b/tools/xl/xl.c >> index 2d1ec18ea3..31eb223309 100644 >> --- a/tools/xl/xl.c >> +++ b/tools/xl/xl.c >> @@ -57,6 +57,8 @@ int max_grant_frames = -1; >> int max_maptrack_frames = -1; >> int max_grant_version = LIBXL_MAX_GRANT_DEFAULT; >> libxl_domid domid_policy = INVALID_DOMID; >> +int assisted_xapic = -1; >> +int assisted_x2apic = -1; >> >> xentoollog_level minmsglevel = minmsglevel_default; >> >> @@ -201,6 +203,12 @@ static void parse_global_config(const char *configfile, >> if (!xlu_cfg_get_long (config, "claim_mode", &l, 0)) >> claim_mode = l; >> >> + if (!xlu_cfg_get_long (config, "assisted_xapic", &l, 0)) >> + assisted_xapic = l; >> + >> + if (!xlu_cfg_get_long (config, "assisted_x2apic", &l, 0)) >> + assisted_x2apic = l; >> + >> xlu_cfg_replace_string (config, "remus.default.netbufscript", >> &default_remus_netbufscript, 0); >> xlu_cfg_replace_string (config, "colo.default.proxyscript", >> diff --git a/tools/xl/xl.h b/tools/xl/xl.h >> index c5c4bedbdd..528deb3feb 100644 >> --- a/tools/xl/xl.h >> +++ b/tools/xl/xl.h >> @@ -286,6 +286,8 @@ extern libxl_bitmap global_vm_affinity_mask; >> extern libxl_bitmap global_hvm_affinity_mask; >> extern libxl_bitmap global_pv_affinity_mask; >> extern libxl_domid domid_policy; >> +extern int assisted_xapic; >> +extern int assisted_x2apic; >> >> enum output_format { >> OUTPUT_FORMAT_JSON, >> diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c >> index 117fcdcb2b..0ab9b145fe 100644 >> --- a/tools/xl/xl_parse.c >> +++ b/tools/xl/xl_parse.c >> @@ -1681,6 +1681,22 @@ void parse_config_data(const char *config_source, >> xlu_cfg_get_defbool(config, "vpt_align", &b_info->u.hvm.vpt_align, 0); >> xlu_cfg_get_defbool(config, "apic", &b_info->apic, 0); >> >> + e = xlu_cfg_get_long(config, "assisted_xapic", &l , 0); >> + if ((e == ESRCH && assisted_xapic != -1)) /* use global default if present */ >> + libxl_defbool_set(&b_info->arch_x86.assisted_xapic, assisted_xapic); >> + else if (!e) >> + libxl_defbool_set(&b_info->arch_x86.assisted_xapic, l); >> + else >> + exit(1); >> + >> + e = xlu_cfg_get_long(config, "assisted_x2apic", &l, 0); >> + if ((e == ESRCH && assisted_x2apic != -1)) /* use global default if present */ >> + libxl_defbool_set(&b_info->arch_x86.assisted_x2apic, assisted_x2apic); >> + else if (!e) >> + libxl_defbool_set(&b_info->arch_x86.assisted_x2apic, l); >> + else >> + exit(1); >> + >> switch (xlu_cfg_get_list(config, "viridian", >> &viridian, &num_viridian, 1)) >> { >> diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c >> index a5048ed654..bcca0dc900 100644 >> --- a/xen/arch/x86/domain.c >> +++ b/xen/arch/x86/domain.c >> @@ -619,6 +619,8 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >> bool hvm = config->flags & XEN_DOMCTL_CDF_hvm; >> bool hap = config->flags & XEN_DOMCTL_CDF_hap; >> bool nested_virt = config->flags & XEN_DOMCTL_CDF_nested_virt; >> + bool assisted_xapic = config->arch.misc_flags & XEN_X86_ASSISTED_XAPIC; >> + bool assisted_x2apic = config->arch.misc_flags & XEN_X86_ASSISTED_X2APIC; >> unsigned int max_vcpus; >> >> if ( hvm ? !hvm_enabled : !IS_ENABLED(CONFIG_PV) ) >> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >> } >> } >> >> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) >> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | >> + XEN_X86_ASSISTED_XAPIC | >> + XEN_X86_ASSISTED_X2APIC) ) >> { >> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", >> config->arch.misc_flags); >> return -EINVAL; >> } >> >> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) >> + { >> + dprintk(XENLOG_INFO, >> + "Interrupt Controller Virtualization not supported for PV\n"); >> + return -EINVAL; >> + } >> + >> + if ( (assisted_xapic && !assisted_xapic_available) || >> + (assisted_x2apic && !assisted_x2apic_available) ) >> + { >> + dprintk(XENLOG_INFO, >> + "Hardware assisted x%sAPIC requested but not available\n", >> + assisted_xapic && !assisted_xapic_available ? "" : "2"); >> + return -EINVAL; > > I think for those two you could return -ENODEV if others agree. > >> + } >> + >> return 0; >> } >> >> @@ -864,6 +884,12 @@ int arch_domain_create(struct domain *d, >> >> d->arch.msr_relaxed = config->arch.misc_flags & XEN_X86_MSR_RELAXED; >> >> + d->arch.hvm.assisted_xapic = >> + config->arch.misc_flags & XEN_X86_ASSISTED_XAPIC; >> + >> + d->arch.hvm.assisted_x2apic = >> + config->arch.misc_flags & XEN_X86_ASSISTED_X2APIC; >> + >> return 0; >> >> fail: >> diff --git a/xen/arch/x86/hvm/vmx/vmcs.c b/xen/arch/x86/hvm/vmx/vmcs.c >> index 06831099ed..e4503a02a7 100644 >> --- a/xen/arch/x86/hvm/vmx/vmcs.c >> +++ b/xen/arch/x86/hvm/vmx/vmcs.c >> @@ -1157,6 +1157,10 @@ static int construct_vmcs(struct vcpu *v) >> __vmwrite(PLE_WINDOW, ple_window); >> } >> >> + if ( !has_assisted_xapic(v->domain) ) >> + v->arch.hvm.vmx.secondary_exec_control &= >> + ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; >> + >> if ( cpu_has_vmx_secondary_exec_control ) >> __vmwrite(SECONDARY_VM_EXEC_CONTROL, >> v->arch.hvm.vmx.secondary_exec_control); >> diff --git a/xen/arch/x86/hvm/vmx/vmx.c b/xen/arch/x86/hvm/vmx/vmx.c >> index c075370f64..949ddd684c 100644 >> --- a/xen/arch/x86/hvm/vmx/vmx.c >> +++ b/xen/arch/x86/hvm/vmx/vmx.c >> @@ -3344,16 +3344,11 @@ static void vmx_install_vlapic_mapping(struct vcpu *v) >> >> void vmx_vlapic_msr_changed(struct vcpu *v) >> { >> - int virtualize_x2apic_mode; >> struct vlapic *vlapic = vcpu_vlapic(v); >> unsigned int msr; >> >> - virtualize_x2apic_mode = ( (cpu_has_vmx_apic_reg_virt || >> - cpu_has_vmx_virtual_intr_delivery) && >> - cpu_has_vmx_virtualize_x2apic_mode ); >> - >> - if ( !cpu_has_vmx_virtualize_apic_accesses && >> - !virtualize_x2apic_mode ) >> + if ( !has_assisted_xapic(v->domain) && >> + !has_assisted_x2apic(v->domain) ) >> return; >> >> vmx_vmcs_enter(v); >> @@ -3363,7 +3358,7 @@ void vmx_vlapic_msr_changed(struct vcpu *v) >> if ( !vlapic_hw_disabled(vlapic) && >> (vlapic_base_address(vlapic) == APIC_DEFAULT_PHYS_BASE) ) >> { >> - if ( virtualize_x2apic_mode && vlapic_x2apic_mode(vlapic) ) >> + if ( has_assisted_x2apic(v->domain) && vlapic_x2apic_mode(vlapic) ) >> { >> v->arch.hvm.vmx.secondary_exec_control |= >> SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE; >> @@ -3384,7 +3379,7 @@ void vmx_vlapic_msr_changed(struct vcpu *v) >> vmx_clear_msr_intercept(v, MSR_X2APIC_SELF, VMX_MSR_W); >> } >> } >> - else >> + else if ( has_assisted_xapic(v->domain) ) >> v->arch.hvm.vmx.secondary_exec_control |= >> SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; >> } >> diff --git a/xen/arch/x86/include/asm/hvm/domain.h b/xen/arch/x86/include/asm/hvm/domain.h >> index 698455444e..92bf53483c 100644 >> --- a/xen/arch/x86/include/asm/hvm/domain.h >> +++ b/xen/arch/x86/include/asm/hvm/domain.h >> @@ -117,6 +117,12 @@ struct hvm_domain { >> >> bool is_s3_suspended; >> >> + /* xAPIC hardware assisted virtualization. */ >> + bool assisted_xapic; >> + >> + /* x2APIC hardware assisted virtualization. */ >> + bool assisted_x2apic; >> + >> /* hypervisor intercepted msix table */ >> struct list_head msixtbl_list; >> >> diff --git a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >> index 9119aa8536..5b7d662ed7 100644 >> --- a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >> +++ b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >> @@ -220,6 +220,9 @@ void vmx_vmcs_reload(struct vcpu *v); >> #define CPU_BASED_ACTIVATE_SECONDARY_CONTROLS 0x80000000 >> extern u32 vmx_cpu_based_exec_control; >> >> +#define has_assisted_xapic(d) ((d)->arch.hvm.assisted_xapic) >> +#define has_assisted_x2apic(d) ((d)->arch.hvm.assisted_x2apic) > > Those macros should not be in an Intel specific header, > arch/x86/include/asm/hvm/domain.h is likely a better place. Actually do you think hvm.h could be better? diff --git a/xen/arch/x86/include/asm/hvm/hvm.h b/xen/arch/x86/include/asm/hvm/hvm.h index 5b7ec0cf69..65a978f670 100644 --- a/xen/arch/x86/include/asm/hvm/hvm.h +++ b/xen/arch/x86/include/asm/hvm/hvm.h @@ -373,6 +373,12 @@ int hvm_get_param(struct domain *d, uint32_t index, uint64_t *value); #define hvm_tsc_scaling_ratio(d) \ ((d)->arch.hvm.tsc_scaling_ratio) +#define has_assisted_xapic(d) \ + ((d)->arch.hvm.assisted_xapic) + +#define has_assisted_x2apic(d) \ + ((d)->arch.hvm.assisted_x2apic) + #define hvm_get_guest_time(v) hvm_get_guest_time_fixed(v, 0) #define hvm_paging_enabled(v) \ Thank you, Jane.
On Tue, Mar 08, 2022 at 03:44:18PM +0000, Jane Malalane wrote: > On 08/03/2022 11:38, Roger Pau Monné wrote: > > On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: > >> diff --git a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > >> index 9119aa8536..5b7d662ed7 100644 > >> --- a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > >> +++ b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > >> @@ -220,6 +220,9 @@ void vmx_vmcs_reload(struct vcpu *v); > >> #define CPU_BASED_ACTIVATE_SECONDARY_CONTROLS 0x80000000 > >> extern u32 vmx_cpu_based_exec_control; > >> > >> +#define has_assisted_xapic(d) ((d)->arch.hvm.assisted_xapic) > >> +#define has_assisted_x2apic(d) ((d)->arch.hvm.assisted_x2apic) > > > > Those macros should not be in an Intel specific header, > > arch/x86/include/asm/hvm/domain.h is likely a better place. > > Actually do you think hvm.h could be better? I guess that's also fine, I did suggest hvm/domain.h because that's where the fields get declared. I guess you prefer hvm.h because there are other HVM related helpers in there? Thanks, Roger.
On 08/03/2022 16:02, Roger Pau Monné wrote: > On Tue, Mar 08, 2022 at 03:44:18PM +0000, Jane Malalane wrote: >> On 08/03/2022 11:38, Roger Pau Monné wrote: >>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >>>> diff --git a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >>>> index 9119aa8536..5b7d662ed7 100644 >>>> --- a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >>>> +++ b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >>>> @@ -220,6 +220,9 @@ void vmx_vmcs_reload(struct vcpu *v); >>>> #define CPU_BASED_ACTIVATE_SECONDARY_CONTROLS 0x80000000 >>>> extern u32 vmx_cpu_based_exec_control; >>>> >>>> +#define has_assisted_xapic(d) ((d)->arch.hvm.assisted_xapic) >>>> +#define has_assisted_x2apic(d) ((d)->arch.hvm.assisted_x2apic) >>> >>> Those macros should not be in an Intel specific header, >>> arch/x86/include/asm/hvm/domain.h is likely a better place. >> >> Actually do you think hvm.h could be better? > > I guess that's also fine, I did suggest hvm/domain.h because that's > where the fields get declared. I guess you prefer hvm.h because there > are other HVM related helpers in there? Yeah, that is why - tsc_scaling_ratio also gets defined in domain.h, for e.g. Thank you for pointing this out, Jane.
On 08/03/2022 16:02, Roger Pau Monné wrote: > On Tue, Mar 08, 2022 at 03:44:18PM +0000, Jane Malalane wrote: >> On 08/03/2022 11:38, Roger Pau Monné wrote: >>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >>>> diff --git a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >>>> index 9119aa8536..5b7d662ed7 100644 >>>> --- a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >>>> +++ b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h >>>> @@ -220,6 +220,9 @@ void vmx_vmcs_reload(struct vcpu *v); >>>> #define CPU_BASED_ACTIVATE_SECONDARY_CONTROLS 0x80000000 >>>> extern u32 vmx_cpu_based_exec_control; >>>> >>>> +#define has_assisted_xapic(d) ((d)->arch.hvm.assisted_xapic) >>>> +#define has_assisted_x2apic(d) ((d)->arch.hvm.assisted_x2apic) >>> >>> Those macros should not be in an Intel specific header, >>> arch/x86/include/asm/hvm/domain.h is likely a better place. >> >> Actually do you think hvm.h could be better? > > I guess that's also fine, I did suggest hvm/domain.h because that's > where the fields get declared. I guess you prefer hvm.h because there > are other HVM related helpers in there? Yeah, that is why - tsc_scaling_ratio also gets defined in domain.h for e.g. Thanks again, Jane.
On Tue, Mar 08, 2022 at 04:16:21PM +0000, Jane Malalane wrote: > On 08/03/2022 16:02, Roger Pau Monné wrote: > > On Tue, Mar 08, 2022 at 03:44:18PM +0000, Jane Malalane wrote: > >> On 08/03/2022 11:38, Roger Pau Monné wrote: > >>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: > >>>> diff --git a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > >>>> index 9119aa8536..5b7d662ed7 100644 > >>>> --- a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > >>>> +++ b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h > >>>> @@ -220,6 +220,9 @@ void vmx_vmcs_reload(struct vcpu *v); > >>>> #define CPU_BASED_ACTIVATE_SECONDARY_CONTROLS 0x80000000 > >>>> extern u32 vmx_cpu_based_exec_control; > >>>> > >>>> +#define has_assisted_xapic(d) ((d)->arch.hvm.assisted_xapic) > >>>> +#define has_assisted_x2apic(d) ((d)->arch.hvm.assisted_x2apic) > >>> > >>> Those macros should not be in an Intel specific header, > >>> arch/x86/include/asm/hvm/domain.h is likely a better place. > >> > >> Actually do you think hvm.h could be better? > > > > I guess that's also fine, I did suggest hvm/domain.h because that's > > where the fields get declared. I guess you prefer hvm.h because there > > are other HVM related helpers in there? > > Yeah, that is why - tsc_scaling_ratio also gets defined in domain.h for e.g. I'm fine with placing it in hvm.h. Thanks, Roger.
On 08/03/2022 14:41, Jan Beulich wrote: > [CAUTION - EXTERNAL EMAIL] DO NOT reply, click links, or open attachments unless you have verified the sender and know the content is safe. > > On 08.03.2022 15:31, Jane Malalane wrote: >> On 08/03/2022 12:33, Roger Pau Monné wrote: >>> On Tue, Mar 08, 2022 at 01:24:23PM +0100, Jan Beulich wrote: >>>> On 08.03.2022 12:38, Roger Pau Monné wrote: >>>>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >>>>>> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >>>>>> } >>>>>> } >>>>>> >>>>>> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) >>>>>> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | >>>>>> + XEN_X86_ASSISTED_XAPIC | >>>>>> + XEN_X86_ASSISTED_X2APIC) ) >>>>>> { >>>>>> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", >>>>>> config->arch.misc_flags); >>>>>> return -EINVAL; >>>>>> } >>>>>> >>>>>> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) >>>>>> + { >>>>>> + dprintk(XENLOG_INFO, >>>>>> + "Interrupt Controller Virtualization not supported for PV\n"); >>>>>> + return -EINVAL; >>>>>> + } >>>>>> + >>>>>> + if ( (assisted_xapic && !assisted_xapic_available) || >>>>>> + (assisted_x2apic && !assisted_x2apic_available) ) >>>>>> + { >>>>>> + dprintk(XENLOG_INFO, >>>>>> + "Hardware assisted x%sAPIC requested but not available\n", >>>>>> + assisted_xapic && !assisted_xapic_available ? "" : "2"); >>>>>> + return -EINVAL; >>>>> >>>>> I think for those two you could return -ENODEV if others agree. >>>> >>>> If by "two" you mean the xAPIC and x2APIC aspects here (and not e.g. this >>>> and the earlier if()), then I agree. I'm always in favor of using distinct >>>> error codes when possible and at least halfway sensible. >>> >>> I would be fine by using it for the !hvm if also. IMO it makes sense >>> as PV doesn't have an APIC 'device' at all, so ENODEV would seem >>> fitting. EINVAL is also fine as the caller shouldn't even attempt that >>> in the first place. >>> >>> So let's use it for the last if only. >> Wouldn't it make more sense to use -ENODEV particularly for the first? I >> agree that -ENODEV should be reported in the first case because it >> doesn't make sense to request acceleration of something that doesn't >> exist and I should have put that. But having a look at the hap code >> (since it resembles the second case), it returns -EINVAL when it is not >> available, unless you deem this to be different or, in retrospective, >> that the hap code should too have been coded to return -ENODEV. >> >> if ( hap && !hvm_hap_supported() ) >> { >> dprintk(XENLOG_INFO, "HAP requested but not available\n"); >> return -EINVAL; >> } > > This is just one of the examples where using -ENODEV as you suggest > would introduce an inconsistency. We use -EINVAL also for other > purely guest-type dependent checks. > > Jan Hi Jan, so here I was comparing the hap implementation with the second case, i.e. if ( (assisted_xapic && !assisted_xapic_available) || (assisted_x2apic && !assisted_x2apic_available) ) and you seem to agree that using -ENODEV would be inconsistent? Have I misinterpreted this? Thanks, Jane.
On 09.03.2022 16:56, Jane Malalane wrote: > On 08/03/2022 14:41, Jan Beulich wrote: >> [CAUTION - EXTERNAL EMAIL] DO NOT reply, click links, or open attachments unless you have verified the sender and know the content is safe. >> >> On 08.03.2022 15:31, Jane Malalane wrote: >>> On 08/03/2022 12:33, Roger Pau Monné wrote: >>>> On Tue, Mar 08, 2022 at 01:24:23PM +0100, Jan Beulich wrote: >>>>> On 08.03.2022 12:38, Roger Pau Monné wrote: >>>>>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >>>>>>> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >>>>>>> } >>>>>>> } >>>>>>> >>>>>>> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) >>>>>>> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | >>>>>>> + XEN_X86_ASSISTED_XAPIC | >>>>>>> + XEN_X86_ASSISTED_X2APIC) ) >>>>>>> { >>>>>>> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", >>>>>>> config->arch.misc_flags); >>>>>>> return -EINVAL; >>>>>>> } >>>>>>> >>>>>>> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) >>>>>>> + { >>>>>>> + dprintk(XENLOG_INFO, >>>>>>> + "Interrupt Controller Virtualization not supported for PV\n"); >>>>>>> + return -EINVAL; >>>>>>> + } >>>>>>> + >>>>>>> + if ( (assisted_xapic && !assisted_xapic_available) || >>>>>>> + (assisted_x2apic && !assisted_x2apic_available) ) >>>>>>> + { >>>>>>> + dprintk(XENLOG_INFO, >>>>>>> + "Hardware assisted x%sAPIC requested but not available\n", >>>>>>> + assisted_xapic && !assisted_xapic_available ? "" : "2"); >>>>>>> + return -EINVAL; >>>>>> >>>>>> I think for those two you could return -ENODEV if others agree. >>>>> >>>>> If by "two" you mean the xAPIC and x2APIC aspects here (and not e.g. this >>>>> and the earlier if()), then I agree. I'm always in favor of using distinct >>>>> error codes when possible and at least halfway sensible. >>>> >>>> I would be fine by using it for the !hvm if also. IMO it makes sense >>>> as PV doesn't have an APIC 'device' at all, so ENODEV would seem >>>> fitting. EINVAL is also fine as the caller shouldn't even attempt that >>>> in the first place. >>>> >>>> So let's use it for the last if only. >>> Wouldn't it make more sense to use -ENODEV particularly for the first? I >>> agree that -ENODEV should be reported in the first case because it >>> doesn't make sense to request acceleration of something that doesn't >>> exist and I should have put that. But having a look at the hap code >>> (since it resembles the second case), it returns -EINVAL when it is not >>> available, unless you deem this to be different or, in retrospective, >>> that the hap code should too have been coded to return -ENODEV. >>> >>> if ( hap && !hvm_hap_supported() ) >>> { >>> dprintk(XENLOG_INFO, "HAP requested but not available\n"); >>> return -EINVAL; >>> } >> >> This is just one of the examples where using -ENODEV as you suggest >> would introduce an inconsistency. We use -EINVAL also for other >> purely guest-type dependent checks. >> >> Jan > Hi Jan, so here I was comparing the hap implementation with the second > case, i.e. > > if ( (assisted_xapic && !assisted_xapic_available) || > (assisted_x2apic && !assisted_x2apic_available) ) > > and you seem to agree that using -ENODEV would be inconsistent? Have I > misinterpreted this? Not exactly. I'm comparing existing hap / hvm / !hap / !hvm uses with what you add. Jan
On 09/03/2022 16:51, Jan Beulich wrote: > [CAUTION - EXTERNAL EMAIL] DO NOT reply, click links, or open attachments unless you have verified the sender and know the content is safe. > > On 09.03.2022 16:56, Jane Malalane wrote: >> On 08/03/2022 14:41, Jan Beulich wrote: >>> [CAUTION - EXTERNAL EMAIL] DO NOT reply, click links, or open attachments unless you have verified the sender and know the content is safe. >>> >>> On 08.03.2022 15:31, Jane Malalane wrote: >>>> On 08/03/2022 12:33, Roger Pau Monné wrote: >>>>> On Tue, Mar 08, 2022 at 01:24:23PM +0100, Jan Beulich wrote: >>>>>> On 08.03.2022 12:38, Roger Pau Monné wrote: >>>>>>> On Mon, Mar 07, 2022 at 03:06:09PM +0000, Jane Malalane wrote: >>>>>>>> @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) >>>>>>>> } >>>>>>>> } >>>>>>>> >>>>>>>> - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) >>>>>>>> + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | >>>>>>>> + XEN_X86_ASSISTED_XAPIC | >>>>>>>> + XEN_X86_ASSISTED_X2APIC) ) >>>>>>>> { >>>>>>>> dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", >>>>>>>> config->arch.misc_flags); >>>>>>>> return -EINVAL; >>>>>>>> } >>>>>>>> >>>>>>>> + if ( (assisted_xapic || assisted_x2apic) && !hvm ) >>>>>>>> + { >>>>>>>> + dprintk(XENLOG_INFO, >>>>>>>> + "Interrupt Controller Virtualization not supported for PV\n"); >>>>>>>> + return -EINVAL; >>>>>>>> + } >>>>>>>> + >>>>>>>> + if ( (assisted_xapic && !assisted_xapic_available) || >>>>>>>> + (assisted_x2apic && !assisted_x2apic_available) ) >>>>>>>> + { >>>>>>>> + dprintk(XENLOG_INFO, >>>>>>>> + "Hardware assisted x%sAPIC requested but not available\n", >>>>>>>> + assisted_xapic && !assisted_xapic_available ? "" : "2"); >>>>>>>> + return -EINVAL; >>>>>>> >>>>>>> I think for those two you could return -ENODEV if others agree. >>>>>> >>>>>> If by "two" you mean the xAPIC and x2APIC aspects here (and not e.g. this >>>>>> and the earlier if()), then I agree. I'm always in favor of using distinct >>>>>> error codes when possible and at least halfway sensible. >>>>> >>>>> I would be fine by using it for the !hvm if also. IMO it makes sense >>>>> as PV doesn't have an APIC 'device' at all, so ENODEV would seem >>>>> fitting. EINVAL is also fine as the caller shouldn't even attempt that >>>>> in the first place. >>>>> >>>>> So let's use it for the last if only. >>>> Wouldn't it make more sense to use -ENODEV particularly for the first? I >>>> agree that -ENODEV should be reported in the first case because it >>>> doesn't make sense to request acceleration of something that doesn't >>>> exist and I should have put that. But having a look at the hap code >>>> (since it resembles the second case), it returns -EINVAL when it is not >>>> available, unless you deem this to be different or, in retrospective, >>>> that the hap code should too have been coded to return -ENODEV. >>>> >>>> if ( hap && !hvm_hap_supported() ) >>>> { >>>> dprintk(XENLOG_INFO, "HAP requested but not available\n"); >>>> return -EINVAL; >>>> } >>> >>> This is just one of the examples where using -ENODEV as you suggest >>> would introduce an inconsistency. We use -EINVAL also for other >>> purely guest-type dependent checks. >>> >>> Jan >> Hi Jan, so here I was comparing the hap implementation with the second >> case, i.e. >> >> if ( (assisted_xapic && !assisted_xapic_available) || >> (assisted_x2apic && !assisted_x2apic_available) ) >> >> and you seem to agree that using -ENODEV would be inconsistent? Have I >> misinterpreted this? > > Not exactly. I'm comparing existing hap / hvm / !hap / !hvm uses with > what you add. > > Jan > Okay, I wil swap the error codes then, thank you. Jane.
diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in index b98d161398..dcca564a23 100644 --- a/docs/man/xl.cfg.5.pod.in +++ b/docs/man/xl.cfg.5.pod.in @@ -1862,6 +1862,25 @@ firmware tables when using certain older guest Operating Systems. These tables have been superseded by newer constructs within the ACPI tables. +=item B<assisted_xapic=BOOLEAN> + +B<(x86 only)> Enables or disables hardware assisted virtualization for +xAPIC. With this option enabled, a memory-mapped APIC access will be +decoded by hardware and either issue a more specific VM exit than just +an EPT fault, or altogether avoid a VM exit. Notice full +virtualization for xAPIC can only be achieved if hardware supports +“APIC-register virtualization” and “virtual-interrupt delivery”. The +default is settable via L<xl.conf(5)>. + +=item B<assisted_x2apic=BOOLEAN> + +B<(x86 only)> Enables or disables hardware assisted virtualization for +x2APIC. With this option enabled, an MSR-Based APIC access will +either issue a VM exit or altogether avoid one. Notice full +virtualization for x2APIC can only be achieved if hardware supports +“APIC-register virtualization” and “virtual-interrupt delivery”. The +default is settable via L<xl.conf(5)>. + =item B<nx=BOOLEAN> B<(x86 only)> Hides or exposes the No-eXecute capability. This allows a guest diff --git a/docs/man/xl.conf.5.pod.in b/docs/man/xl.conf.5.pod.in index df20c08137..95d136d1ea 100644 --- a/docs/man/xl.conf.5.pod.in +++ b/docs/man/xl.conf.5.pod.in @@ -107,6 +107,18 @@ Sets the default value for the C<max_grant_version> domain config value. Default: maximum grant version supported by the hypervisor. +=item B<assisted_xapic=BOOLEAN> + +If enabled, domains will use xAPIC hardware assisted virtualization by default. + +Default: enabled if supported. + +=item B<assisted_x2apic=BOOLEAN> + +If enabled, domains will use x2APIC hardware assisted virtualization by default. + +Default: enabled if supported. + =item B<vif.default.script="PATH"> Configures the default hotplug script used by virtual network devices. diff --git a/tools/golang/xenlight/helpers.gen.go b/tools/golang/xenlight/helpers.gen.go index dd4e6c9f14..dece545ee0 100644 --- a/tools/golang/xenlight/helpers.gen.go +++ b/tools/golang/xenlight/helpers.gen.go @@ -1120,6 +1120,12 @@ x.ArchArm.Vuart = VuartType(xc.arch_arm.vuart) if err := x.ArchX86.MsrRelaxed.fromC(&xc.arch_x86.msr_relaxed);err != nil { return fmt.Errorf("converting field ArchX86.MsrRelaxed: %v", err) } +if err := x.ArchX86.AssistedXapic.fromC(&xc.arch_x86.assisted_xapic);err != nil { +return fmt.Errorf("converting field ArchX86.AssistedXapic: %v", err) +} +if err := x.ArchX86.AssistedX2Apic.fromC(&xc.arch_x86.assisted_x2apic);err != nil { +return fmt.Errorf("converting field ArchX86.AssistedX2Apic: %v", err) +} x.Altp2M = Altp2MMode(xc.altp2m) x.VmtraceBufKb = int(xc.vmtrace_buf_kb) if err := x.Vpmu.fromC(&xc.vpmu);err != nil { @@ -1605,6 +1611,12 @@ xc.arch_arm.vuart = C.libxl_vuart_type(x.ArchArm.Vuart) if err := x.ArchX86.MsrRelaxed.toC(&xc.arch_x86.msr_relaxed); err != nil { return fmt.Errorf("converting field ArchX86.MsrRelaxed: %v", err) } +if err := x.ArchX86.AssistedXapic.toC(&xc.arch_x86.assisted_xapic); err != nil { +return fmt.Errorf("converting field ArchX86.AssistedXapic: %v", err) +} +if err := x.ArchX86.AssistedX2Apic.toC(&xc.arch_x86.assisted_x2apic); err != nil { +return fmt.Errorf("converting field ArchX86.AssistedX2Apic: %v", err) +} xc.altp2m = C.libxl_altp2m_mode(x.Altp2M) xc.vmtrace_buf_kb = C.int(x.VmtraceBufKb) if err := x.Vpmu.toC(&xc.vpmu); err != nil { diff --git a/tools/golang/xenlight/types.gen.go b/tools/golang/xenlight/types.gen.go index 87be46c745..253c9ad93d 100644 --- a/tools/golang/xenlight/types.gen.go +++ b/tools/golang/xenlight/types.gen.go @@ -520,6 +520,8 @@ Vuart VuartType } ArchX86 struct { MsrRelaxed Defbool +AssistedXapic Defbool +AssistedX2Apic Defbool } Altp2M Altp2MMode VmtraceBufKb int diff --git a/tools/include/libxl.h b/tools/include/libxl.h index 94e6355822..cdcccd6d01 100644 --- a/tools/include/libxl.h +++ b/tools/include/libxl.h @@ -535,6 +535,13 @@ #define LIBXL_HAVE_PHYSINFO_ASSISTED_APIC 1 /* + * LIBXL_HAVE_ASSISTED_APIC indicates that libxl_domain_build_info has + * assisted_xapic and assisted_x2apic fields for enabling hardware + * assisted virtualization for x{2}apic per domain. + */ +#define LIBXL_HAVE_ASSISTED_APIC 1 + +/* * libxl ABI compatibility * * The only guarantee which libxl makes regarding ABI compatibility diff --git a/tools/libs/light/libxl_arch.h b/tools/libs/light/libxl_arch.h index 207ceac6a1..03b89929e6 100644 --- a/tools/libs/light/libxl_arch.h +++ b/tools/libs/light/libxl_arch.h @@ -71,8 +71,9 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, libxl_domain_create_info *c_info); _hidden -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, - libxl_domain_build_info *b_info); +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, + libxl_domain_build_info *b_info, + const libxl_physinfo *physinfo); _hidden int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c index 39fdca1b49..ba5b8f433f 100644 --- a/tools/libs/light/libxl_arm.c +++ b/tools/libs/light/libxl_arm.c @@ -1384,8 +1384,9 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, } } -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, - libxl_domain_build_info *b_info) +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, + libxl_domain_build_info *b_info, + const libxl_physinfo *physinfo) { /* ACPI is disabled by default */ libxl_defbool_setdefault(&b_info->acpi, false); @@ -1399,6 +1400,8 @@ void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, memset(&b_info->u, '\0', sizeof(b_info->u)); b_info->type = LIBXL_DOMAIN_TYPE_INVALID; libxl_domain_build_info_init_type(b_info, LIBXL_DOMAIN_TYPE_PVH); + + return 0; } int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, diff --git a/tools/libs/light/libxl_create.c b/tools/libs/light/libxl_create.c index 15ed021f41..88d08d7277 100644 --- a/tools/libs/light/libxl_create.c +++ b/tools/libs/light/libxl_create.c @@ -75,6 +75,7 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, libxl_domain_build_info *b_info) { int i, rc; + libxl_physinfo info; if (b_info->type != LIBXL_DOMAIN_TYPE_HVM && b_info->type != LIBXL_DOMAIN_TYPE_PV && @@ -264,7 +265,18 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, if (!b_info->event_channels) b_info->event_channels = 1023; - libxl__arch_domain_build_info_setdefault(gc, b_info); + rc = libxl_get_physinfo(CTX, &info); + if (rc) { + LOG(ERROR, "failed to get hypervisor info"); + return rc; + } + + rc = libxl__arch_domain_build_info_setdefault(gc, b_info, &info); + if (rc) { + LOG(ERROR, "unable to set domain arch build info defaults"); + return rc; + } + libxl_defbool_setdefault(&b_info->dm_restrict, false); if (b_info->iommu_memkb == LIBXL_MEMKB_DEFAULT) @@ -457,14 +469,6 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc, } if (b_info->max_grant_version == LIBXL_MAX_GRANT_DEFAULT) { - libxl_physinfo info; - - rc = libxl_get_physinfo(CTX, &info); - if (rc) { - LOG(ERROR, "failed to get hypervisor info"); - return rc; - } - if (info.cap_gnttab_v2) b_info->max_grant_version = 2; else if (info.cap_gnttab_v1) diff --git a/tools/libs/light/libxl_types.idl b/tools/libs/light/libxl_types.idl index 42ac6c357b..db5eb0a0b3 100644 --- a/tools/libs/light/libxl_types.idl +++ b/tools/libs/light/libxl_types.idl @@ -648,6 +648,8 @@ libxl_domain_build_info = Struct("domain_build_info",[ ("vuart", libxl_vuart_type), ])), ("arch_x86", Struct(None, [("msr_relaxed", libxl_defbool), + ("assisted_xapic", libxl_defbool), + ("assisted_x2apic", libxl_defbool), ])), # Alternate p2m is not bound to any architecture or guest type, as it is # supported by x86 HVM and ARM support is planned. diff --git a/tools/libs/light/libxl_x86.c b/tools/libs/light/libxl_x86.c index e0a06ecfe3..c377d13b19 100644 --- a/tools/libs/light/libxl_x86.c +++ b/tools/libs/light/libxl_x86.c @@ -23,6 +23,14 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc, if (libxl_defbool_val(d_config->b_info.arch_x86.msr_relaxed)) config->arch.misc_flags |= XEN_X86_MSR_RELAXED; + if (d_config->c_info.type != LIBXL_DOMAIN_TYPE_PV) + { + if (libxl_defbool_val(d_config->b_info.arch_x86.assisted_xapic)) + config->arch.misc_flags |= XEN_X86_ASSISTED_XAPIC; + + if (libxl_defbool_val(d_config->b_info.arch_x86.assisted_x2apic)) + config->arch.misc_flags |= XEN_X86_ASSISTED_X2APIC; + } return 0; } @@ -819,11 +827,27 @@ void libxl__arch_domain_create_info_setdefault(libxl__gc *gc, { } -void libxl__arch_domain_build_info_setdefault(libxl__gc *gc, - libxl_domain_build_info *b_info) +int libxl__arch_domain_build_info_setdefault(libxl__gc *gc, + libxl_domain_build_info *b_info, + const libxl_physinfo *physinfo) { libxl_defbool_setdefault(&b_info->acpi, true); libxl_defbool_setdefault(&b_info->arch_x86.msr_relaxed, false); + + if (b_info->type != LIBXL_DOMAIN_TYPE_PV) { + libxl_defbool_setdefault(&b_info->arch_x86.assisted_xapic, + physinfo->cap_assisted_xapic); + libxl_defbool_setdefault(&b_info->arch_x86.assisted_x2apic, + physinfo->cap_assisted_x2apic); + } + + else if (!libxl_defbool_is_default(b_info->arch_x86.assisted_xapic) || + !libxl_defbool_is_default(b_info->arch_x86.assisted_x2apic)) { + LOG(ERROR, "Interrupt Controller Virtualization not supported for PV"); + return ERROR_INVAL; + } + + return 0; } int libxl__arch_passthrough_mode_setdefault(libxl__gc *gc, diff --git a/tools/ocaml/libs/xc/xenctrl.ml b/tools/ocaml/libs/xc/xenctrl.ml index 21783d3622..672a11ceb6 100644 --- a/tools/ocaml/libs/xc/xenctrl.ml +++ b/tools/ocaml/libs/xc/xenctrl.ml @@ -50,6 +50,8 @@ type x86_arch_emulation_flags = type x86_arch_misc_flags = | X86_MSR_RELAXED + | X86_ASSISTED_XAPIC + | X86_ASSISTED_X2APIC type xen_x86_arch_domainconfig = { diff --git a/tools/ocaml/libs/xc/xenctrl.mli b/tools/ocaml/libs/xc/xenctrl.mli index af6ba3d1a0..f9a6aa3a0f 100644 --- a/tools/ocaml/libs/xc/xenctrl.mli +++ b/tools/ocaml/libs/xc/xenctrl.mli @@ -44,6 +44,8 @@ type x86_arch_emulation_flags = type x86_arch_misc_flags = | X86_MSR_RELAXED + | X86_ASSISTED_XAPIC + | X86_ASSISTED_X2APIC type xen_x86_arch_domainconfig = { emulation_flags: x86_arch_emulation_flags list; diff --git a/tools/ocaml/libs/xc/xenctrl_stubs.c b/tools/ocaml/libs/xc/xenctrl_stubs.c index e0d49b18d2..ecfc7125d5 100644 --- a/tools/ocaml/libs/xc/xenctrl_stubs.c +++ b/tools/ocaml/libs/xc/xenctrl_stubs.c @@ -239,7 +239,7 @@ CAMLprim value stub_xc_domain_create(value xch, value wanted_domid, value config cfg.arch.misc_flags = ocaml_list_to_c_bitmap /* ! x86_arch_misc_flags X86_ none */ - /* ! XEN_X86_ XEN_X86_MSR_RELAXED all */ + /* ! XEN_X86_ XEN_X86_ASSISTED_X2APIC max */ (VAL_MISC_FLAGS); #undef VAL_MISC_FLAGS diff --git a/tools/xl/xl.c b/tools/xl/xl.c index 2d1ec18ea3..31eb223309 100644 --- a/tools/xl/xl.c +++ b/tools/xl/xl.c @@ -57,6 +57,8 @@ int max_grant_frames = -1; int max_maptrack_frames = -1; int max_grant_version = LIBXL_MAX_GRANT_DEFAULT; libxl_domid domid_policy = INVALID_DOMID; +int assisted_xapic = -1; +int assisted_x2apic = -1; xentoollog_level minmsglevel = minmsglevel_default; @@ -201,6 +203,12 @@ static void parse_global_config(const char *configfile, if (!xlu_cfg_get_long (config, "claim_mode", &l, 0)) claim_mode = l; + if (!xlu_cfg_get_long (config, "assisted_xapic", &l, 0)) + assisted_xapic = l; + + if (!xlu_cfg_get_long (config, "assisted_x2apic", &l, 0)) + assisted_x2apic = l; + xlu_cfg_replace_string (config, "remus.default.netbufscript", &default_remus_netbufscript, 0); xlu_cfg_replace_string (config, "colo.default.proxyscript", diff --git a/tools/xl/xl.h b/tools/xl/xl.h index c5c4bedbdd..528deb3feb 100644 --- a/tools/xl/xl.h +++ b/tools/xl/xl.h @@ -286,6 +286,8 @@ extern libxl_bitmap global_vm_affinity_mask; extern libxl_bitmap global_hvm_affinity_mask; extern libxl_bitmap global_pv_affinity_mask; extern libxl_domid domid_policy; +extern int assisted_xapic; +extern int assisted_x2apic; enum output_format { OUTPUT_FORMAT_JSON, diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c index 117fcdcb2b..0ab9b145fe 100644 --- a/tools/xl/xl_parse.c +++ b/tools/xl/xl_parse.c @@ -1681,6 +1681,22 @@ void parse_config_data(const char *config_source, xlu_cfg_get_defbool(config, "vpt_align", &b_info->u.hvm.vpt_align, 0); xlu_cfg_get_defbool(config, "apic", &b_info->apic, 0); + e = xlu_cfg_get_long(config, "assisted_xapic", &l , 0); + if ((e == ESRCH && assisted_xapic != -1)) /* use global default if present */ + libxl_defbool_set(&b_info->arch_x86.assisted_xapic, assisted_xapic); + else if (!e) + libxl_defbool_set(&b_info->arch_x86.assisted_xapic, l); + else + exit(1); + + e = xlu_cfg_get_long(config, "assisted_x2apic", &l, 0); + if ((e == ESRCH && assisted_x2apic != -1)) /* use global default if present */ + libxl_defbool_set(&b_info->arch_x86.assisted_x2apic, assisted_x2apic); + else if (!e) + libxl_defbool_set(&b_info->arch_x86.assisted_x2apic, l); + else + exit(1); + switch (xlu_cfg_get_list(config, "viridian", &viridian, &num_viridian, 1)) { diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c index a5048ed654..bcca0dc900 100644 --- a/xen/arch/x86/domain.c +++ b/xen/arch/x86/domain.c @@ -619,6 +619,8 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) bool hvm = config->flags & XEN_DOMCTL_CDF_hvm; bool hap = config->flags & XEN_DOMCTL_CDF_hap; bool nested_virt = config->flags & XEN_DOMCTL_CDF_nested_virt; + bool assisted_xapic = config->arch.misc_flags & XEN_X86_ASSISTED_XAPIC; + bool assisted_x2apic = config->arch.misc_flags & XEN_X86_ASSISTED_X2APIC; unsigned int max_vcpus; if ( hvm ? !hvm_enabled : !IS_ENABLED(CONFIG_PV) ) @@ -685,13 +687,31 @@ int arch_sanitise_domain_config(struct xen_domctl_createdomain *config) } } - if ( config->arch.misc_flags & ~XEN_X86_MSR_RELAXED ) + if ( config->arch.misc_flags & ~(XEN_X86_MSR_RELAXED | + XEN_X86_ASSISTED_XAPIC | + XEN_X86_ASSISTED_X2APIC) ) { dprintk(XENLOG_INFO, "Invalid arch misc flags %#x\n", config->arch.misc_flags); return -EINVAL; } + if ( (assisted_xapic || assisted_x2apic) && !hvm ) + { + dprintk(XENLOG_INFO, + "Interrupt Controller Virtualization not supported for PV\n"); + return -EINVAL; + } + + if ( (assisted_xapic && !assisted_xapic_available) || + (assisted_x2apic && !assisted_x2apic_available) ) + { + dprintk(XENLOG_INFO, + "Hardware assisted x%sAPIC requested but not available\n", + assisted_xapic && !assisted_xapic_available ? "" : "2"); + return -EINVAL; + } + return 0; } @@ -864,6 +884,12 @@ int arch_domain_create(struct domain *d, d->arch.msr_relaxed = config->arch.misc_flags & XEN_X86_MSR_RELAXED; + d->arch.hvm.assisted_xapic = + config->arch.misc_flags & XEN_X86_ASSISTED_XAPIC; + + d->arch.hvm.assisted_x2apic = + config->arch.misc_flags & XEN_X86_ASSISTED_X2APIC; + return 0; fail: diff --git a/xen/arch/x86/hvm/vmx/vmcs.c b/xen/arch/x86/hvm/vmx/vmcs.c index 06831099ed..e4503a02a7 100644 --- a/xen/arch/x86/hvm/vmx/vmcs.c +++ b/xen/arch/x86/hvm/vmx/vmcs.c @@ -1157,6 +1157,10 @@ static int construct_vmcs(struct vcpu *v) __vmwrite(PLE_WINDOW, ple_window); } + if ( !has_assisted_xapic(v->domain) ) + v->arch.hvm.vmx.secondary_exec_control &= + ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; + if ( cpu_has_vmx_secondary_exec_control ) __vmwrite(SECONDARY_VM_EXEC_CONTROL, v->arch.hvm.vmx.secondary_exec_control); diff --git a/xen/arch/x86/hvm/vmx/vmx.c b/xen/arch/x86/hvm/vmx/vmx.c index c075370f64..949ddd684c 100644 --- a/xen/arch/x86/hvm/vmx/vmx.c +++ b/xen/arch/x86/hvm/vmx/vmx.c @@ -3344,16 +3344,11 @@ static void vmx_install_vlapic_mapping(struct vcpu *v) void vmx_vlapic_msr_changed(struct vcpu *v) { - int virtualize_x2apic_mode; struct vlapic *vlapic = vcpu_vlapic(v); unsigned int msr; - virtualize_x2apic_mode = ( (cpu_has_vmx_apic_reg_virt || - cpu_has_vmx_virtual_intr_delivery) && - cpu_has_vmx_virtualize_x2apic_mode ); - - if ( !cpu_has_vmx_virtualize_apic_accesses && - !virtualize_x2apic_mode ) + if ( !has_assisted_xapic(v->domain) && + !has_assisted_x2apic(v->domain) ) return; vmx_vmcs_enter(v); @@ -3363,7 +3358,7 @@ void vmx_vlapic_msr_changed(struct vcpu *v) if ( !vlapic_hw_disabled(vlapic) && (vlapic_base_address(vlapic) == APIC_DEFAULT_PHYS_BASE) ) { - if ( virtualize_x2apic_mode && vlapic_x2apic_mode(vlapic) ) + if ( has_assisted_x2apic(v->domain) && vlapic_x2apic_mode(vlapic) ) { v->arch.hvm.vmx.secondary_exec_control |= SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE; @@ -3384,7 +3379,7 @@ void vmx_vlapic_msr_changed(struct vcpu *v) vmx_clear_msr_intercept(v, MSR_X2APIC_SELF, VMX_MSR_W); } } - else + else if ( has_assisted_xapic(v->domain) ) v->arch.hvm.vmx.secondary_exec_control |= SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; } diff --git a/xen/arch/x86/include/asm/hvm/domain.h b/xen/arch/x86/include/asm/hvm/domain.h index 698455444e..92bf53483c 100644 --- a/xen/arch/x86/include/asm/hvm/domain.h +++ b/xen/arch/x86/include/asm/hvm/domain.h @@ -117,6 +117,12 @@ struct hvm_domain { bool is_s3_suspended; + /* xAPIC hardware assisted virtualization. */ + bool assisted_xapic; + + /* x2APIC hardware assisted virtualization. */ + bool assisted_x2apic; + /* hypervisor intercepted msix table */ struct list_head msixtbl_list; diff --git a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h index 9119aa8536..5b7d662ed7 100644 --- a/xen/arch/x86/include/asm/hvm/vmx/vmcs.h +++ b/xen/arch/x86/include/asm/hvm/vmx/vmcs.h @@ -220,6 +220,9 @@ void vmx_vmcs_reload(struct vcpu *v); #define CPU_BASED_ACTIVATE_SECONDARY_CONTROLS 0x80000000 extern u32 vmx_cpu_based_exec_control; +#define has_assisted_xapic(d) ((d)->arch.hvm.assisted_xapic) +#define has_assisted_x2apic(d) ((d)->arch.hvm.assisted_x2apic) + #define PIN_BASED_EXT_INTR_MASK 0x00000001 #define PIN_BASED_NMI_EXITING 0x00000008 #define PIN_BASED_VIRTUAL_NMIS 0x00000020 diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c index a2278d9499..a0c6b89a88 100644 --- a/xen/arch/x86/traps.c +++ b/xen/arch/x86/traps.c @@ -1121,7 +1121,8 @@ void cpuid_hypervisor_leaves(const struct vcpu *v, uint32_t leaf, if ( !is_hvm_domain(d) || subleaf != 0 ) break; - if ( cpu_has_vmx_apic_reg_virt ) + if ( cpu_has_vmx_apic_reg_virt && + has_assisted_xapic(d) ) res->a |= XEN_HVM_CPUID_APIC_ACCESS_VIRT; /* @@ -1130,9 +1131,9 @@ void cpuid_hypervisor_leaves(const struct vcpu *v, uint32_t leaf, * and wrmsr in the guest will run without VMEXITs (see * vmx_vlapic_msr_changed()). */ - if ( cpu_has_vmx_virtualize_x2apic_mode && - cpu_has_vmx_apic_reg_virt && - cpu_has_vmx_virtual_intr_delivery ) + if ( cpu_has_vmx_apic_reg_virt && + cpu_has_vmx_virtual_intr_delivery && + has_assisted_x2apic(d) ) res->a |= XEN_HVM_CPUID_X2APIC_VIRT; /* diff --git a/xen/include/public/arch-x86/xen.h b/xen/include/public/arch-x86/xen.h index 7acd94c8eb..9da32c6239 100644 --- a/xen/include/public/arch-x86/xen.h +++ b/xen/include/public/arch-x86/xen.h @@ -317,6 +317,8 @@ struct xen_arch_domainconfig { * doesn't allow the guest to read or write to the underlying MSR. */ #define XEN_X86_MSR_RELAXED (1u << 0) +#define XEN_X86_ASSISTED_XAPIC (1u << 1) +#define XEN_X86_ASSISTED_X2APIC (1u << 2) uint32_t misc_flags; };
Introduce a new per-domain creation x86 specific flag to select whether hardware assisted virtualization should be used for x{2}APIC. A per-domain option is added to xl in order to select the usage of x{2}APIC hardware assisted virtualization, as well as a global configuration option. Having all APIC interaction exit to Xen for emulation is slow and can induce much overhead. Hardware can speed up x{2}APIC by decoding the APIC access and providing a VM exit with a more specific exit reason than a regular EPT fault or by altogether avoiding a VM exit. On the other hand, being able to disable x{2}APIC hardware assisted virtualization can be useful for testing and debugging purposes. Note: vmx_install_vlapic_mapping doesn't require modifications regardless of whether the guest has "Virtualize APIC accesses" enabled or not, i.e., setting the APIC_ACCESS_ADDR VMCS field is fine so long as virtualize_apic_accesses is supported by the CPU. Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Jane Malalane <jane.malalane@citrix.com> --- CC: Wei Liu <wl@xen.org> CC: Anthony PERARD <anthony.perard@citrix.com> CC: Juergen Gross <jgross@suse.com> CC: Andrew Cooper <andrew.cooper3@citrix.com> CC: George Dunlap <george.dunlap@citrix.com> CC: Jan Beulich <jbeulich@suse.com> CC: Julien Grall <julien@xen.org> CC: Stefano Stabellini <sstabellini@kernel.org> CC: Christian Lindig <christian.lindig@citrix.com> CC: David Scott <dave@recoil.org> CC: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com> CC: "Roger Pau Monné" <roger.pau@citrix.com> v5: * Revert v4 changes in vmx_vlapic_msr_changed(), preserving the use of the has_assisted_x{2}apic macros * Following changes in assisted_x{2}apic_available definitions in patch 1, retighten conditionals for setting XEN_HVM_CPUID_APIC_ACCESS_VIRT and XEN_HVM_CPUID_X2APIC_VIRT in cpuid_hypervisor_leaves() v4: * Add has_assisted_x{2}apic macros and use them where appropriate * Replace CPU checks with per-domain assisted_x{2}apic control options in vmx_vlapic_msr_changed() and cpuid_hypervisor_leaves(), following edits to assisted_x{2}apic_available definitions in patch 1 Note: new assisted_x{2}apic_available definitions make later cpu_has_vmx_apic_reg_virt and cpu_has_vmx_virtual_intr_delivery checks redundant in vmx_vlapic_msr_changed() v3: * Change info in xl.cfg to better express reality and fix capitalization of x{2}apic * Move "physinfo" variable definition to the beggining of libxl__domain_build_info_setdefault() * Reposition brackets in if statement to match libxl coding style * Shorten logic in libxl__arch_domain_build_info_setdefault() * Correct dprintk message in arch_sanitise_domain_config() * Make appropriate changes in vmx_vlapic_msr_changed() and cpuid_hypervisor_leaves() for amended "assisted_x2apic" bit * Remove unneeded parantheses v2: * Add a LIBXL_HAVE_ASSISTED_APIC macro * Pass xcpyshinfo as a pointer in libxl__arch_get_physinfo * Add a return statement in now "int" libxl__arch_domain_build_info_setdefault() * Preserve libxl__arch_domain_build_info_setdefault 's location in libxl_create.c * Correct x{2}apic default setting logic in libxl__arch_domain_prepare_config() * Correct logic for parsing assisted_x{2}apic host/guest options in xl_parse.c and initialize them to -1 in xl.c * Use guest options directly in vmx_vlapic_msr_changed * Fix indentation of bool assisted_x{2}apic in struct hvm_domain * Add a change in xenctrl_stubs.c to pass xenctrl ABI checks --- docs/man/xl.cfg.5.pod.in | 19 +++++++++++++++++++ docs/man/xl.conf.5.pod.in | 12 ++++++++++++ tools/golang/xenlight/helpers.gen.go | 12 ++++++++++++ tools/golang/xenlight/types.gen.go | 2 ++ tools/include/libxl.h | 7 +++++++ tools/libs/light/libxl_arch.h | 5 +++-- tools/libs/light/libxl_arm.c | 7 +++++-- tools/libs/light/libxl_create.c | 22 +++++++++++++--------- tools/libs/light/libxl_types.idl | 2 ++ tools/libs/light/libxl_x86.c | 28 ++++++++++++++++++++++++++-- tools/ocaml/libs/xc/xenctrl.ml | 2 ++ tools/ocaml/libs/xc/xenctrl.mli | 2 ++ tools/ocaml/libs/xc/xenctrl_stubs.c | 2 +- tools/xl/xl.c | 8 ++++++++ tools/xl/xl.h | 2 ++ tools/xl/xl_parse.c | 16 ++++++++++++++++ xen/arch/x86/domain.c | 28 +++++++++++++++++++++++++++- xen/arch/x86/hvm/vmx/vmcs.c | 4 ++++ xen/arch/x86/hvm/vmx/vmx.c | 13 ++++--------- xen/arch/x86/include/asm/hvm/domain.h | 6 ++++++ xen/arch/x86/include/asm/hvm/vmx/vmcs.h | 3 +++ xen/arch/x86/traps.c | 9 +++++---- xen/include/public/arch-x86/xen.h | 2 ++ 23 files changed, 183 insertions(+), 30 deletions(-)