diff mbox series

[v1,1/4] dt-bindings: pinctrl: mt8192: Add wrapping node for pin configurations

Message ID 20220315211936.442708-2-nfraprado@collabora.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: pinctrl: mt8192: Add missing wrapping node and properties | expand

Commit Message

Nícolas F. R. A. Prado March 15, 2022, 9:19 p.m. UTC
On mt8192, the pinctrl node has pinctrl groups to group pin
configurations. Each pinctrl group contains one or more pinmux subnodes
to list needed pins and their configurations. By supporting multiple
subnodes, we can configure different pin characteristics
(driving/pull-up/pull-down/etc.) in a pinctrl group.

Update the mt8192 pinctrl dt-binding to add the missing pinctrl group
node that wraps the pinmux subnodes and update the example at the end.
While at it, also remove the example embedded in the description since
it is redundant to the already supplied example at the end.

This same change was done for mt8195 in commit 79dcd4e840cc ("dt-bindings:
pinctrl: mt8195: add wrapping node of pin configurations").

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

 .../bindings/pinctrl/pinctrl-mt8192.yaml      | 92 ++++++++++---------
 1 file changed, 47 insertions(+), 45 deletions(-)

Comments

AngeloGioacchino Del Regno March 16, 2022, 8:39 a.m. UTC | #1
Il 15/03/22 22:19, Nícolas F. R. A. Prado ha scritto:
> On mt8192, the pinctrl node has pinctrl groups to group pin
> configurations. Each pinctrl group contains one or more pinmux subnodes
> to list needed pins and their configurations. By supporting multiple
> subnodes, we can configure different pin characteristics
> (driving/pull-up/pull-down/etc.) in a pinctrl group.
> 
> Update the mt8192 pinctrl dt-binding to add the missing pinctrl group
> node that wraps the pinmux subnodes and update the example at the end.
> While at it, also remove the example embedded in the description since
> it is redundant to the already supplied example at the end.
> 
> This same change was done for mt8195 in commit 79dcd4e840cc ("dt-bindings:
> pinctrl: mt8195: add wrapping node of pin configurations").
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 

Hello Nicolas!

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Rob Herring March 23, 2022, 6:51 p.m. UTC | #2
On Tue, 15 Mar 2022 17:19:33 -0400, Nícolas F. R. A. Prado wrote:
> On mt8192, the pinctrl node has pinctrl groups to group pin
> configurations. Each pinctrl group contains one or more pinmux subnodes
> to list needed pins and their configurations. By supporting multiple
> subnodes, we can configure different pin characteristics
> (driving/pull-up/pull-down/etc.) in a pinctrl group.
> 
> Update the mt8192 pinctrl dt-binding to add the missing pinctrl group
> node that wraps the pinmux subnodes and update the example at the end.
> While at it, also remove the example embedded in the description since
> it is redundant to the already supplied example at the end.
> 
> This same change was done for mt8195 in commit 79dcd4e840cc ("dt-bindings:
> pinctrl: mt8195: add wrapping node of pin configurations").
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 
> ---
> 
>  .../bindings/pinctrl/pinctrl-mt8192.yaml      | 92 ++++++++++---------
>  1 file changed, 47 insertions(+), 45 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Linus Walleij April 19, 2022, 9:12 p.m. UTC | #3
On Tue, Mar 15, 2022 at 10:20 PM Nícolas F. R. A. Prado
<nfraprado@collabora.com> wrote:

> On mt8192, the pinctrl node has pinctrl groups to group pin
> configurations. Each pinctrl group contains one or more pinmux subnodes
> to list needed pins and their configurations. By supporting multiple
> subnodes, we can configure different pin characteristics
> (driving/pull-up/pull-down/etc.) in a pinctrl group.
>
> Update the mt8192 pinctrl dt-binding to add the missing pinctrl group
> node that wraps the pinmux subnodes and update the example at the end.
> While at it, also remove the example embedded in the description since
> it is redundant to the already supplied example at the end.
>
> This same change was done for mt8195 in commit 79dcd4e840cc ("dt-bindings:
> pinctrl: mt8195: add wrapping node of pin configurations").
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

This patch 1/4 applied to the pinctrl tree.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
index 3c84676a167d..d63e23d9ed16 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -51,62 +51,55 @@  properties:
 
 #PIN CONFIGURATION NODES
 patternProperties:
-  '^pins':
+  '-pins$':
     type: object
-    description: |
-      A pinctrl node should contain at least one subnodes representing the
-      pinctrl groups available on the machine. Each subnode will list the
-      pins it needs, and how they should be configured, with regard to muxer
-      configuration, pullups, drive strength, input enable/disable and
-      input schmitt.
-      An example of using macro:
-      pincontroller {
-        /* GPIO0 set as multifunction GPIO0 */
-        state_0_node_a {
-          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-        };
-        /* GPIO1 set as multifunction PWM */
-        state_0_node_b {
-          pinmux = <PINMUX_GPIO1__FUNC_PWM_1>;
-        };
-      };
-    $ref: "pinmux-node.yaml"
-
-    properties:
-      pinmux:
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
         description: |
-          Integer array, represents gpio pin number and mux setting.
-          Supported pin number and mux varies for different SoCs, and are defined
-          as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+        $ref: "pinmux-node.yaml"
 
-      drive-strength:
-        description: |
-          It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
-          dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are defined
+              as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
 
-      bias-pull-down: true
+          drive-strength:
+            description: |
+              It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
+              dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
-      bias-pull-up: true
+          bias-pull-down: true
 
-      bias-disable: true
+          bias-pull-up: true
 
-      output-high: true
+          bias-disable: true
 
-      output-low: true
+          output-high: true
 
-      input-enable: true
+          output-low: true
 
-      input-disable: true
+          input-enable: true
 
-      input-schmitt-enable: true
+          input-disable: true
 
-      input-schmitt-disable: true
+          input-schmitt-enable: true
 
-    required:
-      - pinmux
+          input-schmitt-disable: true
 
-    additionalProperties: false
+        required:
+          - pinmux
+
+        additionalProperties: false
 
 allOf:
   - $ref: "pinctrl.yaml#"
@@ -151,8 +144,17 @@  examples:
                     interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
                     #interrupt-cells = <2>;
 
-                    pins {
-                      pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-                      output-low;
+                    spi1-default-pins {
+                            pins-cs-mosi-clk {
+                                    pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+                                             <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+                                             <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+                                    bias-disable;
+                            };
+
+                            pins-miso {
+                                    pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+                                    bias-pull-down;
+                            };
                     };
             };