Message ID | 1647359413-31662-5-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add pin control support for lpass sc7280 | expand |
On Tue 15 Mar 10:50 CDT 2022, Srinivasa Rao Mandadapu wrote: > Update custom pin group structure members with framework generic group_desc structure > and replace the driver's custom pinctrl_ops with framework provided generic pin control > group functions to avoid redundant code written in lpass lpi driver. > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> > Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> > --- > drivers/pinctrl/qcom/Kconfig | 1 + > drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 98 +++++++++++++++----------------- > 2 files changed, 48 insertions(+), 51 deletions(-) > > diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig > index ca6f68a..31c4aa6 100644 > --- a/drivers/pinctrl/qcom/Kconfig > +++ b/drivers/pinctrl/qcom/Kconfig > @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI > select PINMUX > select PINCONF > select GENERIC_PINCONF > + select GENERIC_PINCTRL_GROUPS > depends on GPIOLIB > help > This is the pinctrl, pinmux, pinconf and gpiolib driver for the > diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > index 3c15f80..5e27a38 100644 > --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > @@ -51,11 +51,11 @@ > > #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ > { \ > - .name = "gpio" #id, \ > - .pins = gpio##id##_pins, \ > + .group.name = "gpio" #id, \ > + .group.pins = gpio##id##_pins, \ > .pin = id, \ > .slew_offset = soff, \ > - .npins = ARRAY_SIZE(gpio##id##_pins), \ > + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ > .funcs = (int[]){ \ > LPI_MUX_gpio, \ > LPI_MUX_##f1, \ > @@ -67,9 +67,7 @@ > } > > struct lpi_pingroup { > - const char *name; > - const unsigned int *pins; > - unsigned int npins; > + struct group_desc group; > unsigned int pin; > /* Bit offset in slew register for SoundWire pins only */ > int slew_offset; > @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { > LPI_MUX__, > }; > > -static const unsigned int gpio0_pins[] = { 0 }; > -static const unsigned int gpio1_pins[] = { 1 }; > -static const unsigned int gpio2_pins[] = { 2 }; > -static const unsigned int gpio3_pins[] = { 3 }; > -static const unsigned int gpio4_pins[] = { 4 }; > -static const unsigned int gpio5_pins[] = { 5 }; > -static const unsigned int gpio6_pins[] = { 6 }; > -static const unsigned int gpio7_pins[] = { 7 }; > -static const unsigned int gpio8_pins[] = { 8 }; > -static const unsigned int gpio9_pins[] = { 9 }; > -static const unsigned int gpio10_pins[] = { 10 }; > -static const unsigned int gpio11_pins[] = { 11 }; > -static const unsigned int gpio12_pins[] = { 12 }; > -static const unsigned int gpio13_pins[] = { 13 }; > +static int gpio0_pins[] = { 0 }; > +static int gpio1_pins[] = { 1 }; > +static int gpio2_pins[] = { 2 }; > +static int gpio3_pins[] = { 3 }; > +static int gpio4_pins[] = { 4 }; > +static int gpio5_pins[] = { 5 }; > +static int gpio6_pins[] = { 6 }; > +static int gpio7_pins[] = { 7 }; > +static int gpio8_pins[] = { 8 }; > +static int gpio9_pins[] = { 9 }; > +static int gpio10_pins[] = { 10 }; > +static int gpio11_pins[] = { 11 }; > +static int gpio12_pins[] = { 12 }; > +static int gpio13_pins[] = { 13 }; > static const char * const swr_tx_clk_groups[] = { "gpio0" }; > static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; > static const char * const swr_rx_clk_groups[] = { "gpio3" }; > @@ -250,38 +248,10 @@ static int lpi_gpio_write(struct lpi_pinctrl *state, unsigned int pin, > return 0; > } > > -static int lpi_gpio_get_groups_count(struct pinctrl_dev *pctldev) > -{ > - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); > - > - return pctrl->data->ngroups; > -} > - > -static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, > - unsigned int group) > -{ > - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); > - > - return pctrl->data->groups[group].name; > -} > - > -static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, > - unsigned int group, > - const unsigned int **pins, > - unsigned int *num_pins) > -{ > - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); > - > - *pins = pctrl->data->groups[group].pins; > - *num_pins = pctrl->data->groups[group].npins; > - > - return 0; > -} > - > static const struct pinctrl_ops lpi_gpio_pinctrl_ops = { > - .get_groups_count = lpi_gpio_get_groups_count, > - .get_group_name = lpi_gpio_get_group_name, > - .get_group_pins = lpi_gpio_get_group_pins, > + .get_groups_count = pinctrl_generic_get_group_count, > + .get_group_name = pinctrl_generic_get_group_name, > + .get_group_pins = pinctrl_generic_get_group_pins, > .dt_node_to_map = pinconf_generic_dt_node_to_map_group, > .dt_free_map = pinctrl_utils_free_map, > }; > @@ -582,6 +552,28 @@ static const struct gpio_chip lpi_gpio_template = { > .dbg_show = lpi_gpio_dbg_show, > }; > > +static int lpi_build_pin_desc_groups(struct lpi_pinctrl *pctrl) > +{ > + struct group_desc *lpi_groups; > + int i; > + > + lpi_groups = devm_kcalloc(pctrl->dev, pctrl->data->npins, > + sizeof(*lpi_groups), GFP_KERNEL); > + if (!lpi_groups) > + return -ENOMEM; > + > + for (i = 0; i < pctrl->data->npins; i++) { > + const struct pinctrl_pin_desc *pin_info = pctrl->desc.pins + i; > + struct group_desc *group = lpi_groups + i; > + > + group->name = pin_info->name; > + group->pins = (int *)&pin_info->number; > + pinctrl_generic_add_group(pctrl->ctrl, group->name, group->pins, 1, NULL); I've not used this generic interface before, but I believe you need to pair your add with pinctrl_generic_remove_group(), both in error paths and driver remove. Makes me wonder about the usefulness of this, as you will end up with a bit more code than you remove and you have the additional heap allocation. Feels like I'm missing something... > + } > + > + return 0; > +} > + > static int lpi_pinctrl_probe(struct platform_device *pdev) > { > const struct lpi_pinctrl_variant_data *data; > @@ -647,6 +639,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) > goto err_pinctrl; > } > > + ret = lpi_build_pin_desc_groups(pctrl); > + if (ret) > + return ret; A few lines up the code does error handling by goto err_pinctrl, you should do the same. Regards, Bjorn > + > ret = devm_gpiochip_add_data(dev, &pctrl->chip, pctrl); > if (ret) { > dev_err(pctrl->dev, "can't add gpio chip\n"); > -- > 2.7.4 >
On 3/15/2022 10:15 PM, Bjorn Andersson wrote: Thanks for your time Bjorn!!! > On Tue 15 Mar 10:50 CDT 2022, Srinivasa Rao Mandadapu wrote: > >> Update custom pin group structure members with framework generic group_desc structure >> and replace the driver's custom pinctrl_ops with framework provided generic pin control >> group functions to avoid redundant code written in lpass lpi driver. >> >> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> >> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> --- >> drivers/pinctrl/qcom/Kconfig | 1 + >> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 98 +++++++++++++++----------------- >> 2 files changed, 48 insertions(+), 51 deletions(-) >> >> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig >> index ca6f68a..31c4aa6 100644 >> --- a/drivers/pinctrl/qcom/Kconfig >> +++ b/drivers/pinctrl/qcom/Kconfig >> @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI >> select PINMUX >> select PINCONF >> select GENERIC_PINCONF >> + select GENERIC_PINCTRL_GROUPS >> depends on GPIOLIB >> help >> This is the pinctrl, pinmux, pinconf and gpiolib driver for the >> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> index 3c15f80..5e27a38 100644 >> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> @@ -51,11 +51,11 @@ >> >> #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ >> { \ >> - .name = "gpio" #id, \ >> - .pins = gpio##id##_pins, \ >> + .group.name = "gpio" #id, \ >> + .group.pins = gpio##id##_pins, \ >> .pin = id, \ >> .slew_offset = soff, \ >> - .npins = ARRAY_SIZE(gpio##id##_pins), \ >> + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ >> .funcs = (int[]){ \ >> LPI_MUX_gpio, \ >> LPI_MUX_##f1, \ >> @@ -67,9 +67,7 @@ >> } >> >> struct lpi_pingroup { >> - const char *name; >> - const unsigned int *pins; >> - unsigned int npins; >> + struct group_desc group; >> unsigned int pin; >> /* Bit offset in slew register for SoundWire pins only */ >> int slew_offset; >> @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { >> LPI_MUX__, >> }; >> >> -static const unsigned int gpio0_pins[] = { 0 }; >> -static const unsigned int gpio1_pins[] = { 1 }; >> -static const unsigned int gpio2_pins[] = { 2 }; >> -static const unsigned int gpio3_pins[] = { 3 }; >> -static const unsigned int gpio4_pins[] = { 4 }; >> -static const unsigned int gpio5_pins[] = { 5 }; >> -static const unsigned int gpio6_pins[] = { 6 }; >> -static const unsigned int gpio7_pins[] = { 7 }; >> -static const unsigned int gpio8_pins[] = { 8 }; >> -static const unsigned int gpio9_pins[] = { 9 }; >> -static const unsigned int gpio10_pins[] = { 10 }; >> -static const unsigned int gpio11_pins[] = { 11 }; >> -static const unsigned int gpio12_pins[] = { 12 }; >> -static const unsigned int gpio13_pins[] = { 13 }; >> +static int gpio0_pins[] = { 0 }; >> +static int gpio1_pins[] = { 1 }; >> +static int gpio2_pins[] = { 2 }; >> +static int gpio3_pins[] = { 3 }; >> +static int gpio4_pins[] = { 4 }; >> +static int gpio5_pins[] = { 5 }; >> +static int gpio6_pins[] = { 6 }; >> +static int gpio7_pins[] = { 7 }; >> +static int gpio8_pins[] = { 8 }; >> +static int gpio9_pins[] = { 9 }; >> +static int gpio10_pins[] = { 10 }; >> +static int gpio11_pins[] = { 11 }; >> +static int gpio12_pins[] = { 12 }; >> +static int gpio13_pins[] = { 13 }; >> static const char * const swr_tx_clk_groups[] = { "gpio0" }; >> static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; >> static const char * const swr_rx_clk_groups[] = { "gpio3" }; >> @@ -250,38 +248,10 @@ static int lpi_gpio_write(struct lpi_pinctrl *state, unsigned int pin, >> return 0; >> } >> >> -static int lpi_gpio_get_groups_count(struct pinctrl_dev *pctldev) >> -{ >> - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); >> - >> - return pctrl->data->ngroups; >> -} >> - >> -static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, >> - unsigned int group) >> -{ >> - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); >> - >> - return pctrl->data->groups[group].name; >> -} >> - >> -static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, >> - unsigned int group, >> - const unsigned int **pins, >> - unsigned int *num_pins) >> -{ >> - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); >> - >> - *pins = pctrl->data->groups[group].pins; >> - *num_pins = pctrl->data->groups[group].npins; >> - >> - return 0; >> -} >> - >> static const struct pinctrl_ops lpi_gpio_pinctrl_ops = { >> - .get_groups_count = lpi_gpio_get_groups_count, >> - .get_group_name = lpi_gpio_get_group_name, >> - .get_group_pins = lpi_gpio_get_group_pins, >> + .get_groups_count = pinctrl_generic_get_group_count, >> + .get_group_name = pinctrl_generic_get_group_name, >> + .get_group_pins = pinctrl_generic_get_group_pins, >> .dt_node_to_map = pinconf_generic_dt_node_to_map_group, >> .dt_free_map = pinctrl_utils_free_map, >> }; >> @@ -582,6 +552,28 @@ static const struct gpio_chip lpi_gpio_template = { >> .dbg_show = lpi_gpio_dbg_show, >> }; >> >> +static int lpi_build_pin_desc_groups(struct lpi_pinctrl *pctrl) >> +{ >> + struct group_desc *lpi_groups; >> + int i; >> + >> + lpi_groups = devm_kcalloc(pctrl->dev, pctrl->data->npins, >> + sizeof(*lpi_groups), GFP_KERNEL); >> + if (!lpi_groups) >> + return -ENOMEM; >> + >> + for (i = 0; i < pctrl->data->npins; i++) { >> + const struct pinctrl_pin_desc *pin_info = pctrl->desc.pins + i; >> + struct group_desc *group = lpi_groups + i; >> + >> + group->name = pin_info->name; >> + group->pins = (int *)&pin_info->number; >> + pinctrl_generic_add_group(pctrl->ctrl, group->name, group->pins, 1, NULL); > I've not used this generic interface before, but I believe you need to > pair your add with pinctrl_generic_remove_group(), both in error paths > and driver remove. Okay. Will add pinctrl_generic_remove_group() accordingly. > > Makes me wonder about the usefulness of this, as you will end up with > a bit more code than you remove and you have the additional heap > allocation. Feels like I'm missing something... Here Heap allocation can be avoided. will do accordingly and re post. > >> + } >> + >> + return 0; >> +} >> + >> static int lpi_pinctrl_probe(struct platform_device *pdev) >> { >> const struct lpi_pinctrl_variant_data *data; >> @@ -647,6 +639,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) >> goto err_pinctrl; >> } >> >> + ret = lpi_build_pin_desc_groups(pctrl); >> + if (ret) >> + return ret; > A few lines up the code does error handling by goto err_pinctrl, you > should do the same. Okay. will update accordingly. > > Regards, > Bjorn > >> + >> ret = devm_gpiochip_add_data(dev, &pctrl->chip, pctrl); >> if (ret) { >> dev_err(pctrl->dev, "can't add gpio chip\n"); >> -- >> 2.7.4 >>
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index ca6f68a..31c4aa6 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI select PINMUX select PINCONF select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS depends on GPIOLIB help This is the pinctrl, pinmux, pinconf and gpiolib driver for the diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 3c15f80..5e27a38 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -51,11 +51,11 @@ #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ + .group.name = "gpio" #id, \ + .group.pins = gpio##id##_pins, \ .pin = id, \ .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ .funcs = (int[]){ \ LPI_MUX_gpio, \ LPI_MUX_##f1, \ @@ -67,9 +67,7 @@ } struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; + struct group_desc group; unsigned int pin; /* Bit offset in slew register for SoundWire pins only */ int slew_offset; @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { LPI_MUX__, }; -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; static const char * const swr_tx_clk_groups[] = { "gpio0" }; static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; static const char * const swr_rx_clk_groups[] = { "gpio3" }; @@ -250,38 +248,10 @@ static int lpi_gpio_write(struct lpi_pinctrl *state, unsigned int pin, return 0; } -static int lpi_gpio_get_groups_count(struct pinctrl_dev *pctldev) -{ - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - - return pctrl->data->ngroups; -} - -static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, - unsigned int group) -{ - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - - return pctrl->data->groups[group].name; -} - -static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, - unsigned int group, - const unsigned int **pins, - unsigned int *num_pins) -{ - struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - - *pins = pctrl->data->groups[group].pins; - *num_pins = pctrl->data->groups[group].npins; - - return 0; -} - static const struct pinctrl_ops lpi_gpio_pinctrl_ops = { - .get_groups_count = lpi_gpio_get_groups_count, - .get_group_name = lpi_gpio_get_group_name, - .get_group_pins = lpi_gpio_get_group_pins, + .get_groups_count = pinctrl_generic_get_group_count, + .get_group_name = pinctrl_generic_get_group_name, + .get_group_pins = pinctrl_generic_get_group_pins, .dt_node_to_map = pinconf_generic_dt_node_to_map_group, .dt_free_map = pinctrl_utils_free_map, }; @@ -582,6 +552,28 @@ static const struct gpio_chip lpi_gpio_template = { .dbg_show = lpi_gpio_dbg_show, }; +static int lpi_build_pin_desc_groups(struct lpi_pinctrl *pctrl) +{ + struct group_desc *lpi_groups; + int i; + + lpi_groups = devm_kcalloc(pctrl->dev, pctrl->data->npins, + sizeof(*lpi_groups), GFP_KERNEL); + if (!lpi_groups) + return -ENOMEM; + + for (i = 0; i < pctrl->data->npins; i++) { + const struct pinctrl_pin_desc *pin_info = pctrl->desc.pins + i; + struct group_desc *group = lpi_groups + i; + + group->name = pin_info->name; + group->pins = (int *)&pin_info->number; + pinctrl_generic_add_group(pctrl->ctrl, group->name, group->pins, 1, NULL); + } + + return 0; +} + static int lpi_pinctrl_probe(struct platform_device *pdev) { const struct lpi_pinctrl_variant_data *data; @@ -647,6 +639,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) goto err_pinctrl; } + ret = lpi_build_pin_desc_groups(pctrl); + if (ret) + return ret; + ret = devm_gpiochip_add_data(dev, &pctrl->chip, pctrl); if (ret) { dev_err(pctrl->dev, "can't add gpio chip\n");