| Message ID | 0a78380a-89bc-a51a-5cb3-e2f313d2c0a5@zhaoxin.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | USB: Fix xhci ERDP update issue | expand |
On Fri, Mar 18, 2022 at 08:17:50PM +0800, WeitaoWang-oc@zhaoxin.com wrote: > On some situations, software handles TRB events slower than adding TRBs. > If the number of TRB events to be processed in a given interrupt is 256. > The local variable "event_ring_deq" that records in interrupt handler > is equal to software_dequeue. It will cause driver not update ERDP,then > software dequeue pointer is out of sync with ERDP on interrupt exit. > On the next interrupt, the event ring may full but driver will not > update ERDP as software_dequeue is equal to ERDP. > > [ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37 > [ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 > inflight: CMD OUT > [ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 > 00 00 08 00 > [ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host > not responding to stop endpoint command. > [ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110 > [ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not > responding, assume dead > [ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 > inflight: CMD > [ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 > 00 00 08 00 > [ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 > inflight: CMD > > To avoid this issue by update software record local variable when > handles 128 TRB events. > > Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") > Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> > --- > drivers/usb/host/xhci-ring.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index d0b6806275e0..f9707997969d 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -3141,6 +3141,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) > if (event_loop++ < TRBS_PER_SEGMENT / 2) > continue; > xhci_update_erst_dequeue(xhci, event_ring_deq); > + event_ring_deq = xhci->event_ring->dequeue; > > /* ring is half-full, force isoc trbs to interrupt more often */ > if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN) > -- > 2.17.1 Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what needs to be done here to properly describe this. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index d0b6806275e0..f9707997969d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3141,6 +3141,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) if (event_loop++ < TRBS_PER_SEGMENT / 2) continue; xhci_update_erst_dequeue(xhci, event_ring_deq); + event_ring_deq = xhci->event_ring->dequeue; /* ring is half-full, force isoc trbs to interrupt more often */ if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
On some situations, software handles TRB events slower than adding TRBs. If the number of TRB events to be processed in a given interrupt is 256. The local variable "event_ring_deq" that records in interrupt handler is equal to software_dequeue. It will cause driver not update ERDP,then software dequeue pointer is out of sync with ERDP on interrupt exit. On the next interrupt, the event ring may full but driver will not update ERDP as software_dequeue is equal to ERDP. [ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37 [ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00 [ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command. [ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110 [ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead [ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD [ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00 [ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD To avoid this issue by update software record local variable when handles 128 TRB events. Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> --- drivers/usb/host/xhci-ring.c | 1 + 1 file changed, 1 insertion(+)