diff mbox series

[v4,4/4] net: axiemac: use a phandle to reference pcs_phy

Message ID 20220321152515.287119-4-andy.chiu@sifive.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series [v4,1/4] net: axienet: setup mdio unconditionally | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter warning Series does not have a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 2 this patch: 2
netdev/cc_maintainers warning 4 maintainers not CCed: linux-riscv@lists.infradead.org palmer@dabbelt.com linux-arm-kernel@lists.infradead.org paul.walmsley@sifive.com
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 2 this patch: 2
netdev/checkpatch warning WARNING: line length of 82 exceeds 80 columns
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Andy Chiu March 21, 2022, 3:25 p.m. UTC 
In some SGMII use cases where both a fixed link external PHY and the
internal PCS/PMA PHY need to be configured, we should explicitly use a
phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the
driver would use "phy-handle" in the DT as the reference to both the
external and the internal PCS/PMA PHY.

In other cases where the core is connected to a SFP cage, we could still
point phy-handle to the intenal PCS/PMA PHY, and let the driver connect
to the SFP module, if exist, via phylink.

Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

Comments

Robert Hancock March 21, 2022, 6:12 p.m. UTC | #1 
On Mon, 2022-03-21 at 23:25 +0800, Andy Chiu wrote:
> In some SGMII use cases where both a fixed link external PHY and the
> internal PCS/PMA PHY need to be configured, we should explicitly use a
> phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the
> driver would use "phy-handle" in the DT as the reference to both the
> external and the internal PCS/PMA PHY.
> 
> In other cases where the core is connected to a SFP cage, we could still
> point phy-handle to the intenal PCS/PMA PHY, and let the driver connect
> to the SFP module, if exist, via phylink.
> 
> Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX
> mode)
> Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
> Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
> ---
>  drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index 496a9227e760..163753508464 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -2071,9 +2071,16 @@ static int axienet_probe(struct platform_device *pdev)
>  
>  	if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
>  	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
> -		np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
> +		np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
>  		if (!np) {
> -			dev_err(&pdev->dev, "phy-handle required for
> 1000BaseX/SGMII\n");
> +			/* Deprecated: Always use "pcs-handle" for pcs_phy.
> +			 * Falling back to "phy-handle" here is only for
> +			 * backward compatibility with old device trees.
> +			 */
> +			np = of_parse_phandle(pdev->dev.of_node, "phy-handle",
> 0);
> +		}
> +		if (!np) {
> +			dev_err(&pdev->dev, "pcs-handle (preferred) or phy-
> handle required for 1000BaseX/SGMII\n");
>  			ret = -EINVAL;
>  			goto cleanup_mdio;
>  		}

Reviewed-by: Robert Hancock <robert.hancock@calian.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 496a9227e760..163753508464 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2071,9 +2071,16 @@  static int axienet_probe(struct platform_device *pdev)
 
 	if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
 	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
-		np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+		np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
 		if (!np) {
-			dev_err(&pdev->dev, "phy-handle required for 1000BaseX/SGMII\n");
+			/* Deprecated: Always use "pcs-handle" for pcs_phy.
+			 * Falling back to "phy-handle" here is only for
+			 * backward compatibility with old device trees.
+			 */
+			np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+		}
+		if (!np) {
+			dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for 1000BaseX/SGMII\n");
 			ret = -EINVAL;
 			goto cleanup_mdio;
 		}