| Message ID | 20220316130858.93455-2-krzysztof.kozlowski@canonical.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-bindings: gpio: pca95xx: drop useless consumer example | expand |
On Wed, Mar 16, 2022 at 02:08:58PM +0100, Krzysztof Kozlowski wrote: > Consumer examples in the bindings of resource providers are trivial, > useless and duplication of code. Remove the example code for consumer > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > --- > .../bindings/clock/bitmain,bm1880-clk.yaml | 12 ------------ > .../devicetree/bindings/clock/idt,versaclock5.yaml | 7 ------- > .../devicetree/bindings/clock/imx1-clock.yaml | 9 --------- > .../devicetree/bindings/clock/imx21-clock.yaml | 9 --------- > .../devicetree/bindings/clock/imx23-clock.yaml | 9 --------- > .../devicetree/bindings/clock/imx25-clock.yaml | 8 -------- > .../devicetree/bindings/clock/imx27-clock.yaml | 9 --------- > .../devicetree/bindings/clock/imx28-clock.yaml | 9 --------- > .../devicetree/bindings/clock/imx31-clock.yaml | 8 -------- > .../devicetree/bindings/clock/imx35-clock.yaml | 8 -------- > .../devicetree/bindings/clock/imx7ulp-pcc-clock.yaml | 11 ----------- > .../devicetree/bindings/clock/imx7ulp-scg-clock.yaml | 11 ----------- > .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 11 ----------- > .../devicetree/bindings/clock/imxrt1050-clock.yaml | 8 -------- > .../bindings/clock/nvidia,tegra124-car.yaml | 7 ------- > .../bindings/clock/nvidia,tegra20-car.yaml | 7 ------- > 16 files changed, 143 deletions(-) Doesn't apply to my tree (no imxrt1050-clock.yaml), so Acked-by: Rob Herring <robh@kernel.org>
On 3/21/22 14:23, Rob Herring wrote: > On Wed, Mar 16, 2022 at 02:08:58PM +0100, Krzysztof Kozlowski wrote: >> Consumer examples in the bindings of resource providers are trivial, >> useless and duplication of code. Remove the example code for consumer >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> >> --- >> .../bindings/clock/bitmain,bm1880-clk.yaml | 12 ------------ >> .../devicetree/bindings/clock/idt,versaclock5.yaml | 7 ------- >> .../devicetree/bindings/clock/imx1-clock.yaml | 9 --------- >> .../devicetree/bindings/clock/imx21-clock.yaml | 9 --------- >> .../devicetree/bindings/clock/imx23-clock.yaml | 9 --------- >> .../devicetree/bindings/clock/imx25-clock.yaml | 8 -------- >> .../devicetree/bindings/clock/imx27-clock.yaml | 9 --------- >> .../devicetree/bindings/clock/imx28-clock.yaml | 9 --------- >> .../devicetree/bindings/clock/imx31-clock.yaml | 8 -------- >> .../devicetree/bindings/clock/imx35-clock.yaml | 8 -------- >> .../devicetree/bindings/clock/imx7ulp-pcc-clock.yaml | 11 ----------- >> .../devicetree/bindings/clock/imx7ulp-scg-clock.yaml | 11 ----------- >> .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 11 ----------- >> .../devicetree/bindings/clock/imxrt1050-clock.yaml | 8 -------- >> .../bindings/clock/nvidia,tegra124-car.yaml | 7 ------- >> .../bindings/clock/nvidia,tegra20-car.yaml | 7 ------- >> 16 files changed, 143 deletions(-) > > Doesn't apply to my tree (no imxrt1050-clock.yaml), so merge against linux-next I can submit another patch if needed. > Acked-by: Rob Herring <robh@kernel.org>
On 22/03/2022 02:45, Jesse Taube wrote: > > > On 3/21/22 14:23, Rob Herring wrote: >> On Wed, Mar 16, 2022 at 02:08:58PM +0100, Krzysztof Kozlowski wrote: >>> Consumer examples in the bindings of resource providers are trivial, >>> useless and duplication of code. Remove the example code for consumer >>> >>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> >>> --- >>> .../bindings/clock/bitmain,bm1880-clk.yaml | 12 ------------ >>> .../devicetree/bindings/clock/idt,versaclock5.yaml | 7 ------- >>> .../devicetree/bindings/clock/imx1-clock.yaml | 9 --------- >>> .../devicetree/bindings/clock/imx21-clock.yaml | 9 --------- >>> .../devicetree/bindings/clock/imx23-clock.yaml | 9 --------- >>> .../devicetree/bindings/clock/imx25-clock.yaml | 8 -------- >>> .../devicetree/bindings/clock/imx27-clock.yaml | 9 --------- >>> .../devicetree/bindings/clock/imx28-clock.yaml | 9 --------- >>> .../devicetree/bindings/clock/imx31-clock.yaml | 8 -------- >>> .../devicetree/bindings/clock/imx35-clock.yaml | 8 -------- >>> .../devicetree/bindings/clock/imx7ulp-pcc-clock.yaml | 11 ----------- >>> .../devicetree/bindings/clock/imx7ulp-scg-clock.yaml | 11 ----------- >>> .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 11 ----------- >>> .../devicetree/bindings/clock/imxrt1050-clock.yaml | 8 -------- >>> .../bindings/clock/nvidia,tegra124-car.yaml | 7 ------- >>> .../bindings/clock/nvidia,tegra20-car.yaml | 7 ------- >>> 16 files changed, 143 deletions(-) >> >> Doesn't apply to my tree (no imxrt1050-clock.yaml), so > merge against linux-next I can submit another patch if needed. >> Acked-by: Rob Herring <robh@kernel.org> Let me send it after the merge window - all dependencies should be there. Best regards, Krzysztof
On 22/03/2022 09:45, Krzysztof Kozlowski wrote: > On 22/03/2022 02:45, Jesse Taube wrote: >> >> >> On 3/21/22 14:23, Rob Herring wrote: >>> On Wed, Mar 16, 2022 at 02:08:58PM +0100, Krzysztof Kozlowski wrote: >>>> Consumer examples in the bindings of resource providers are trivial, >>>> useless and duplication of code. Remove the example code for consumer >>>> >>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> >>>> --- >>>> .../bindings/clock/bitmain,bm1880-clk.yaml | 12 ------------ >>>> .../devicetree/bindings/clock/idt,versaclock5.yaml | 7 ------- >>>> .../devicetree/bindings/clock/imx1-clock.yaml | 9 --------- >>>> .../devicetree/bindings/clock/imx21-clock.yaml | 9 --------- >>>> .../devicetree/bindings/clock/imx23-clock.yaml | 9 --------- >>>> .../devicetree/bindings/clock/imx25-clock.yaml | 8 -------- >>>> .../devicetree/bindings/clock/imx27-clock.yaml | 9 --------- >>>> .../devicetree/bindings/clock/imx28-clock.yaml | 9 --------- >>>> .../devicetree/bindings/clock/imx31-clock.yaml | 8 -------- >>>> .../devicetree/bindings/clock/imx35-clock.yaml | 8 -------- >>>> .../devicetree/bindings/clock/imx7ulp-pcc-clock.yaml | 11 ----------- >>>> .../devicetree/bindings/clock/imx7ulp-scg-clock.yaml | 11 ----------- >>>> .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 11 ----------- >>>> .../devicetree/bindings/clock/imxrt1050-clock.yaml | 8 -------- >>>> .../bindings/clock/nvidia,tegra124-car.yaml | 7 ------- >>>> .../bindings/clock/nvidia,tegra20-car.yaml | 7 ------- >>>> 16 files changed, 143 deletions(-) >>> >>> Doesn't apply to my tree (no imxrt1050-clock.yaml), so >> merge against linux-next I can submit another patch if needed. >>> Acked-by: Rob Herring <robh@kernel.org> > > Let me send it after the merge window - all dependencies should be there. Optionally this could be picked up by Stephen/Michael (clock). Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml index 228c9313df53..f0f9392470a6 100644 --- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml @@ -61,16 +61,4 @@ examples: #clock-cells = <1>; }; - # Example UART controller node that consumes clock generated by the clock controller: - - | - uart0: serial@58018000 { - compatible = "snps,dw-apb-uart"; - reg = <0x58018000 0x2000>; - clocks = <&clk 45>, <&clk 46>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <0 9 4>; - reg-shift = <2>; - reg-io-width = <4>; - }; - ... diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml index ffd6ae0eed64..be66f1e8b547 100644 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -191,11 +191,4 @@ examples: }; }; - /* Consumer referencing the 5P49V5923 pin OUT1 */ - consumer { - /* ... */ - clocks = <&vc5 1>; - /* ... */ - }; - ... diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml index f4833a29b79e..56f524780b1a 100644 --- a/Documentation/devicetree/bindings/clock/imx1-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml @@ -40,12 +40,3 @@ examples: compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; }; - - pwm@208000 { - #pwm-cells = <2>; - compatible = "fsl,imx1-pwm"; - reg = <0x00208000 0x1000>; - interrupts = <34>; - clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml index 518ad9a4733c..e2d50544700a 100644 --- a/Documentation/devicetree/bindings/clock/imx21-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml @@ -40,12 +40,3 @@ examples: reg = <0x10027000 0x800>; #clock-cells = <1>; }; - - serial@1000a000 { - compatible = "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, - <&clks IMX21_CLK_PER1>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml index 5e296a00e14f..7e890ab9c77d 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -83,12 +83,3 @@ examples: reg = <0x80040000 0x2000>; #clock-cells = <1>; }; - - serial@8006c000 { - compatible = "fsl,imx23-auart"; - reg = <0x8006c000 0x2000>; - interrupts = <24>; - clocks = <&clks 32>; - dmas = <&dma_apbx 6>, <&dma_apbx 7>; - dma-names = "rx", "tx"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml index 2a2b10778e72..1792e138984b 100644 --- a/Documentation/devicetree/bindings/clock/imx25-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml @@ -176,11 +176,3 @@ examples: interrupts = <31>; #clock-cells = <1>; }; - - serial@43f90000 { - compatible = "fsl,imx25-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 79>, <&clks 50>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml index 160268f24487..99925aa22a4c 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml @@ -44,12 +44,3 @@ examples: interrupts = <31>; #clock-cells = <1>; }; - - serial@1000a000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, - <&clks IMX27_CLK_PER1_GATE>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml index f831b780f951..a542d680b1ca 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -106,12 +106,3 @@ examples: reg = <0x80040000 0x2000>; #clock-cells = <1>; }; - - serial@8006a000 { - compatible = "fsl,imx28-auart"; - reg = <0x8006a000 0x2000>; - interrupts = <112>; - dmas = <&dma_apbx 8>, <&dma_apbx 9>; - dma-names = "rx", "tx"; - clocks = <&clks 45>; - }; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml index d2336261c922..168c8ada5e81 100644 --- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml @@ -110,11 +110,3 @@ examples: interrupts = <31>, <53>; #clock-cells = <1>; }; - - serial@43f90000 { - compatible = "fsl,imx31-uart", "fsl,imx21-uart"; - reg = <0x43f90000 0x4000>; - interrupts = <45>; - clocks = <&clks 10>, <&clks 30>; - clock-names = "ipg", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml index 3e20ccaf8131..6415bb6a8d04 100644 --- a/Documentation/devicetree/bindings/clock/imx35-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml @@ -129,11 +129,3 @@ examples: interrupts = <31>; #clock-cells = <1>; }; - - mmc@53fb4000 { - compatible = "fsl,imx35-esdhc"; - reg = <0x53fb4000 0x4000>; - interrupts = <7>; - clocks = <&clks 9>, <&clks 8>, <&clks 43>; - clock-names = "ipg", "ahb", "per"; - }; diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml index 7caf5cee9199..739c3378f8c8 100644 --- a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml @@ -108,14 +108,3 @@ examples: "upll", "sosc_bus_clk", "firc_bus_clk", "rosc", "spll_bus_clk"; }; - - mmc@40380000 { - compatible = "fsl,imx7ulp-usdhc"; - reg = <0x40380000 0x10000>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, - <&scg1 IMX7ULP_CLK_NIC1_DIV>, - <&pcc2 IMX7ULP_CLK_USDHC1>; - clock-names ="ipg", "ahb", "per"; - bus-width = <4>; - }; diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml index ee8efb4ed599..d06344d7e34f 100644 --- a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml @@ -86,14 +86,3 @@ examples: "firc", "upll"; #clock-cells = <1>; }; - - mmc@40380000 { - compatible = "fsl,imx7ulp-usdhc"; - reg = <0x40380000 0x10000>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, - <&scg1 IMX7ULP_CLK_NIC1_DIV>, - <&pcc2 IMX7ULP_CLK_USDHC1>; - clock-names ="ipg", "ahb", "per"; - bus-width = <4>; - }; diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml index 0f6fe365ebf3..cb80105b3c70 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml @@ -101,14 +101,3 @@ examples: "sdhc0_lpcg_ahb_clk"; power-domains = <&pd IMX_SC_R_SDHC_0>; }; - - mmc@5b010000 { - compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x5b010000 0x10000>; - clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "per"; - power-domains = <&pd IMX_SC_R_SDHC_0>; - }; diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml index 35fd08c143f4..03fc5c1a2939 100644 --- a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml @@ -57,11 +57,3 @@ examples: clock-names = "osc"; #clock-cells = <1>; }; - - lpuart1: serial@40184000 { - compatible = "fsl,imxrt1050-lpuart"; - reg = <0x40184000 0x4000>; - interrupts = <20>; - clocks = <&clks IMXRT1050_CLK_LPUART1>; - clock-names = "ipg"; - }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml index ec7ab1483652..1b2181f6d440 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -106,10 +106,3 @@ examples: #clock-cells = <1>; #reset-cells = <1>; }; - - usb-controller@c5004000 { - compatible = "nvidia,tegra20-ehci"; - reg = <0xc5004000 0x4000>; - clocks = <&car TEGRA124_CLK_USB2>; - resets = <&car TEGRA124_CLK_USB2>; - }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml index f832abb7f11a..bee2dd4b29bf 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -97,10 +97,3 @@ examples: power-domains = <&domain>; }; }; - - usb-controller@c5004000 { - compatible = "nvidia,tegra20-ehci"; - reg = <0xc5004000 0x4000>; - clocks = <&car TEGRA20_CLK_USB2>; - resets = <&car TEGRA20_CLK_USB2>; - };
Consumer examples in the bindings of resource providers are trivial, useless and duplication of code. Remove the example code for consumer Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/clock/bitmain,bm1880-clk.yaml | 12 ------------ .../devicetree/bindings/clock/idt,versaclock5.yaml | 7 ------- .../devicetree/bindings/clock/imx1-clock.yaml | 9 --------- .../devicetree/bindings/clock/imx21-clock.yaml | 9 --------- .../devicetree/bindings/clock/imx23-clock.yaml | 9 --------- .../devicetree/bindings/clock/imx25-clock.yaml | 8 -------- .../devicetree/bindings/clock/imx27-clock.yaml | 9 --------- .../devicetree/bindings/clock/imx28-clock.yaml | 9 --------- .../devicetree/bindings/clock/imx31-clock.yaml | 8 -------- .../devicetree/bindings/clock/imx35-clock.yaml | 8 -------- .../devicetree/bindings/clock/imx7ulp-pcc-clock.yaml | 11 ----------- .../devicetree/bindings/clock/imx7ulp-scg-clock.yaml | 11 ----------- .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 11 ----------- .../devicetree/bindings/clock/imxrt1050-clock.yaml | 8 -------- .../bindings/clock/nvidia,tegra124-car.yaml | 7 ------- .../bindings/clock/nvidia,tegra20-car.yaml | 7 ------- 16 files changed, 143 deletions(-)