| Message ID | 20220323162820.110806-6-caleb@connolly.tech (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | iio: adc: introduce Qualcomm SPMI Round Robin ADC | expand |
On Wed, 23 Mar 2022 16:28:16 +0000 Caleb Connolly <caleb.connolly@linaro.org> wrote: > From: Caleb Connolly <caleb.connolly@linaro.org> > > The Round Robin ADC is responsible for reading data about the rate of > charge from the USB or DC input ports, it can also read the battery > ID (resistence), skin temperature and the die temperature of the pmic. > It is found on the PMI8998 and PM660 Qualcomm PMICs. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Whilst I said this patch was fine a few versions ago I didn't add a tag on basis I would probably end up picking it up. To make things more flexible, I'll add one and either Lee or I can do the immutable branch once Lee has had a chance to take a look and is happy with the mfd parts. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > drivers/iio/adc/Kconfig | 12 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/qcom-spmi-rradc.c | 1021 +++++++++++++++++++++++++++++ > 3 files changed, 1034 insertions(+) > create mode 100644 drivers/iio/adc/qcom-spmi-rradc.c > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 4fdc8bfbb407..66557b434fa8 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -812,6 +812,18 @@ config QCOM_PM8XXX_XOADC > To compile this driver as a module, choose M here: the module > will be called qcom-pm8xxx-xoadc. > > +config QCOM_SPMI_RRADC > + tristate "Qualcomm SPMI RRADC" > + depends on MFD_SPMI_PMIC > + help > + This is for the PMIC Round Robin ADC driver. > + > + This driver exposes the battery ID resistor, battery thermal, PMIC die > + temperature, charger USB in and DC in voltage and current. > + > + To compile this driver as a module, choose M here: the module will > + be called qcom-qpmi-rradc. > + > config QCOM_SPMI_IADC > tristate "Qualcomm SPMI PMIC current ADC" > depends on SPMI > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 4a8f1833993b..b0dd7f142abd 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -77,6 +77,7 @@ obj-$(CONFIG_NPCM_ADC) += npcm_adc.o > obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o > obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o > obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o > +obj-$(CONFIG_QCOM_SPMI_RRADC) += qcom-spmi-rradc.o > obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o > obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o > obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o > diff --git a/drivers/iio/adc/qcom-spmi-rradc.c b/drivers/iio/adc/qcom-spmi-rradc.c > new file mode 100644 > index 000000000000..230477fc45d2 > --- /dev/null > +++ b/drivers/iio/adc/qcom-spmi-rradc.c > @@ -0,0 +1,1021 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2016-2017, 2019, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022 Linaro Limited. > + * Author: Caleb Connolly <caleb.connolly@linaro.org> > + * > + * This driver is for the Round Robin ADC found in the pmi8998 and pm660 PMICs. > + */ > + > +#include <linux/bitfield.h> > +#include <linux/delay.h> > +#include <linux/kernel.h> > +#include <linux/math64.h> > +#include <linux/module.h> > +#include <linux/mod_devicetable.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/spmi.h> > +#include <linux/types.h> > +#include <linux/units.h> > + > +#include <asm/unaligned.h> > + > +#include <linux/iio/iio.h> > +#include <linux/iio/types.h> > + > +#include <soc/qcom/qcom-spmi-pmic.h> > + > +#define DRIVER_NAME "qcom-spmi-rradc" > + > +#define RR_ADC_EN_CTL 0x46 > +#define RR_ADC_SKIN_TEMP_LSB 0x50 > +#define RR_ADC_SKIN_TEMP_MSB 0x51 > +#define RR_ADC_CTL 0x52 > +#define RR_ADC_CTL_CONTINUOUS_SEL BIT(3) > +#define RR_ADC_LOG 0x53 > +#define RR_ADC_LOG_CLR_CTRL BIT(0) > + > +#define RR_ADC_FAKE_BATT_LOW_LSB 0x58 > +#define RR_ADC_FAKE_BATT_LOW_MSB 0x59 > +#define RR_ADC_FAKE_BATT_HIGH_LSB 0x5A > +#define RR_ADC_FAKE_BATT_HIGH_MSB 0x5B > + > +#define RR_ADC_BATT_ID_CTRL 0x60 > +#define RR_ADC_BATT_ID_CTRL_CHANNEL_CONV BIT(0) > +#define RR_ADC_BATT_ID_TRIGGER 0x61 > +#define RR_ADC_BATT_ID_STS 0x62 > +#define RR_ADC_BATT_ID_CFG 0x63 > +#define BATT_ID_SETTLE_MASK GENMASK(7, 5) > +#define RR_ADC_BATT_ID_5_LSB 0x66 > +#define RR_ADC_BATT_ID_5_MSB 0x67 > +#define RR_ADC_BATT_ID_15_LSB 0x68 > +#define RR_ADC_BATT_ID_15_MSB 0x69 > +#define RR_ADC_BATT_ID_150_LSB 0x6A > +#define RR_ADC_BATT_ID_150_MSB 0x6B > + > +#define RR_ADC_BATT_THERM_CTRL 0x70 > +#define RR_ADC_BATT_THERM_TRIGGER 0x71 > +#define RR_ADC_BATT_THERM_STS 0x72 > +#define RR_ADC_BATT_THERM_CFG 0x73 > +#define RR_ADC_BATT_THERM_LSB 0x74 > +#define RR_ADC_BATT_THERM_MSB 0x75 > +#define RR_ADC_BATT_THERM_FREQ 0x76 > + > +#define RR_ADC_AUX_THERM_CTRL 0x80 > +#define RR_ADC_AUX_THERM_TRIGGER 0x81 > +#define RR_ADC_AUX_THERM_STS 0x82 > +#define RR_ADC_AUX_THERM_CFG 0x83 > +#define RR_ADC_AUX_THERM_LSB 0x84 > +#define RR_ADC_AUX_THERM_MSB 0x85 > + > +#define RR_ADC_SKIN_HOT 0x86 > +#define RR_ADC_SKIN_TOO_HOT 0x87 > + > +#define RR_ADC_AUX_THERM_C1 0x88 > +#define RR_ADC_AUX_THERM_C2 0x89 > +#define RR_ADC_AUX_THERM_C3 0x8A > +#define RR_ADC_AUX_THERM_HALF_RANGE 0x8B > + > +#define RR_ADC_USB_IN_V_CTRL 0x90 > +#define RR_ADC_USB_IN_V_TRIGGER 0x91 > +#define RR_ADC_USB_IN_V_STS 0x92 > +#define RR_ADC_USB_IN_V_LSB 0x94 > +#define RR_ADC_USB_IN_V_MSB 0x95 > +#define RR_ADC_USB_IN_I_CTRL 0x98 > +#define RR_ADC_USB_IN_I_TRIGGER 0x99 > +#define RR_ADC_USB_IN_I_STS 0x9A > +#define RR_ADC_USB_IN_I_LSB 0x9C > +#define RR_ADC_USB_IN_I_MSB 0x9D > + > +#define RR_ADC_DC_IN_V_CTRL 0xA0 > +#define RR_ADC_DC_IN_V_TRIGGER 0xA1 > +#define RR_ADC_DC_IN_V_STS 0xA2 > +#define RR_ADC_DC_IN_V_LSB 0xA4 > +#define RR_ADC_DC_IN_V_MSB 0xA5 > +#define RR_ADC_DC_IN_I_CTRL 0xA8 > +#define RR_ADC_DC_IN_I_TRIGGER 0xA9 > +#define RR_ADC_DC_IN_I_STS 0xAA > +#define RR_ADC_DC_IN_I_LSB 0xAC > +#define RR_ADC_DC_IN_I_MSB 0xAD > + > +#define RR_ADC_PMI_DIE_TEMP_CTRL 0xB0 > +#define RR_ADC_PMI_DIE_TEMP_TRIGGER 0xB1 > +#define RR_ADC_PMI_DIE_TEMP_STS 0xB2 > +#define RR_ADC_PMI_DIE_TEMP_CFG 0xB3 > +#define RR_ADC_PMI_DIE_TEMP_LSB 0xB4 > +#define RR_ADC_PMI_DIE_TEMP_MSB 0xB5 > + > +#define RR_ADC_CHARGER_TEMP_CTRL 0xB8 > +#define RR_ADC_CHARGER_TEMP_TRIGGER 0xB9 > +#define RR_ADC_CHARGER_TEMP_STS 0xBA > +#define RR_ADC_CHARGER_TEMP_CFG 0xBB > +#define RR_ADC_CHARGER_TEMP_LSB 0xBC > +#define RR_ADC_CHARGER_TEMP_MSB 0xBD > +#define RR_ADC_CHARGER_HOT 0xBE > +#define RR_ADC_CHARGER_TOO_HOT 0xBF > + > +#define RR_ADC_GPIO_CTRL 0xC0 > +#define RR_ADC_GPIO_TRIGGER 0xC1 > +#define RR_ADC_GPIO_STS 0xC2 > +#define RR_ADC_GPIO_LSB 0xC4 > +#define RR_ADC_GPIO_MSB 0xC5 > + > +#define RR_ADC_ATEST_CTRL 0xC8 > +#define RR_ADC_ATEST_TRIGGER 0xC9 > +#define RR_ADC_ATEST_STS 0xCA > +#define RR_ADC_ATEST_LSB 0xCC > +#define RR_ADC_ATEST_MSB 0xCD > +#define RR_ADC_SEC_ACCESS 0xD0 > + > +#define RR_ADC_PERPH_RESET_CTL2 0xD9 > +#define RR_ADC_PERPH_RESET_CTL3 0xDA > +#define RR_ADC_PERPH_RESET_CTL4 0xDB > +#define RR_ADC_INT_TEST1 0xE0 > +#define RR_ADC_INT_TEST_VAL 0xE1 > + > +#define RR_ADC_TM_TRIGGER_CTRLS 0xE2 > +#define RR_ADC_TM_ADC_CTRLS 0xE3 > +#define RR_ADC_TM_CNL_CTRL 0xE4 > +#define RR_ADC_TM_BATT_ID_CTRL 0xE5 > +#define RR_ADC_TM_THERM_CTRL 0xE6 > +#define RR_ADC_TM_CONV_STS 0xE7 > +#define RR_ADC_TM_ADC_READ_LSB 0xE8 > +#define RR_ADC_TM_ADC_READ_MSB 0xE9 > +#define RR_ADC_TM_ATEST_MUX_1 0xEA > +#define RR_ADC_TM_ATEST_MUX_2 0xEB > +#define RR_ADC_TM_REFERENCES 0xED > +#define RR_ADC_TM_MISC_CTL 0xEE > +#define RR_ADC_TM_RR_CTRL 0xEF > + > +#define RR_ADC_TRIGGER_EVERY_CYCLE BIT(7) > +#define RR_ADC_TRIGGER_CTL BIT(0) > + > +#define RR_ADC_BATT_ID_RANGE 820 > + > +#define RR_ADC_BITS 10 > +#define RR_ADC_CHAN_MSB (1 << RR_ADC_BITS) > +#define RR_ADC_FS_VOLTAGE_MV 2500 > + > +/* BATT_THERM 0.25K/LSB */ > +#define RR_ADC_BATT_THERM_LSB_K 4 > + > +#define RR_ADC_TEMP_FS_VOLTAGE_NUM 5000000 > +#define RR_ADC_TEMP_FS_VOLTAGE_DEN 3 > +#define RR_ADC_DIE_TEMP_OFFSET 601400 > +#define RR_ADC_DIE_TEMP_SLOPE 2 > +#define RR_ADC_DIE_TEMP_OFFSET_MILLI_DEGC 25000 > + > +#define RR_ADC_CHG_TEMP_GF_OFFSET_UV 1303168 > +#define RR_ADC_CHG_TEMP_GF_SLOPE_UV_PER_C 3784 > +#define RR_ADC_CHG_TEMP_SMIC_OFFSET_UV 1338433 > +#define RR_ADC_CHG_TEMP_SMIC_SLOPE_UV_PER_C 3655 > +#define RR_ADC_CHG_TEMP_660_GF_OFFSET_UV 1309001 > +#define RR_ADC_CHG_TEMP_660_GF_SLOPE_UV_PER_C 3403 > +#define RR_ADC_CHG_TEMP_660_SMIC_OFFSET_UV 1295898 > +#define RR_ADC_CHG_TEMP_660_SMIC_SLOPE_UV_PER_C 3596 > +#define RR_ADC_CHG_TEMP_660_MGNA_OFFSET_UV 1314779 > +#define RR_ADC_CHG_TEMP_660_MGNA_SLOPE_UV_PER_C 3496 > +#define RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC 25000 > +#define RR_ADC_CHG_THRESHOLD_SCALE 4 > + > +#define RR_ADC_VOLT_INPUT_FACTOR 8 > +#define RR_ADC_CURR_INPUT_FACTOR 2000 > +#define RR_ADC_CURR_USBIN_INPUT_FACTOR_MIL 1886 > +#define RR_ADC_CURR_USBIN_660_FACTOR_MIL 9 > +#define RR_ADC_CURR_USBIN_660_UV_VAL 579500 > + > +#define RR_ADC_GPIO_FS_RANGE 5000 > +#define RR_ADC_COHERENT_CHECK_RETRY 5 > +#define RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN 16 > + > +#define RR_ADC_STS_CHANNEL_READING_MASK GENMASK(1, 0) > +#define RR_ADC_STS_CHANNEL_STS BIT(1) > + > +#define RR_ADC_TP_REV_VERSION1 21 > +#define RR_ADC_TP_REV_VERSION2 29 > +#define RR_ADC_TP_REV_VERSION3 32 > + > +#define RRADC_BATT_ID_DELAY_MAX 8 > + > +enum rradc_channel_id { > + RR_ADC_BATT_ID = 0, > + RR_ADC_BATT_THERM, > + RR_ADC_SKIN_TEMP, > + RR_ADC_USBIN_I, > + RR_ADC_USBIN_V, > + RR_ADC_DCIN_I, > + RR_ADC_DCIN_V, > + RR_ADC_DIE_TEMP, > + RR_ADC_CHG_TEMP, > + RR_ADC_GPIO, > + RR_ADC_CHAN_MAX > +}; > + > +struct rradc_chip; > + > +/** > + * struct rradc_channel - rradc channel data > + * @label: channel label > + * @lsb: Channel least significant byte > + * @status: Channel status address > + * @size: number of bytes to read > + * @trigger_addr: Trigger address, trigger is only used on some channels > + * @trigger_mask: Trigger mask > + * @scale_fn: Post process callback for channels which can't be exposed > + * as offset + scale. > + */ > +struct rradc_channel { > + const char *label; > + u8 lsb; > + u8 status; > + int size; > + int trigger_addr; > + int trigger_mask; > + int (*scale_fn)(struct rradc_chip *chip, u16 adc_code, int *result); > +}; > + > +struct rradc_chip { > + struct device *dev; > + const struct qcom_spmi_pmic *pmic; > + /* > + * Lock held while doing channel conversion > + * involving multiple register read/writes > + */ > + struct mutex conversion_lock; > + struct regmap *regmap; > + u32 base; > + int batt_id_delay; > + u16 batt_id_data; > +}; > + > +static const int batt_id_delays[] = { 0, 1, 4, 12, 20, 40, 60, 80 }; > +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX]; > +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX]; > + > +static int rradc_read(struct rradc_chip *chip, u16 addr, __le16 *buf, int len) > +{ > + int ret, retry_cnt = 0; > + __le16 data_check[RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN / 2]; > + > + if (len > RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN) { > + dev_err(chip->dev, > + "Can't read more than %d bytes, but asked to read %d bytes.\n", > + RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN, len); > + return -EINVAL; > + } > + > + while (retry_cnt < RR_ADC_COHERENT_CHECK_RETRY) { > + ret = regmap_bulk_read(chip->regmap, chip->base + addr, buf, > + len); > + if (ret < 0) { > + dev_err(chip->dev, "rr_adc reg 0x%x failed :%d\n", addr, > + ret); > + return ret; > + } > + > + ret = regmap_bulk_read(chip->regmap, chip->base + addr, > + data_check, len); > + if (ret < 0) { > + dev_err(chip->dev, "rr_adc reg 0x%x failed :%d\n", addr, > + ret); > + return ret; > + } > + > + if (memcmp(buf, data_check, len) != 0) { > + retry_cnt++; > + dev_dbg(chip->dev, > + "coherent read error, retry_cnt:%d\n", > + retry_cnt); > + continue; > + } > + > + break; > + } > + > + if (retry_cnt == RR_ADC_COHERENT_CHECK_RETRY) > + dev_err(chip->dev, "Retry exceeded for coherrency check\n"); > + > + return ret; > +} > + > +static int rradc_get_fab_coeff(struct rradc_chip *chip, int64_t *offset, > + int64_t *slope) > +{ > + if (chip->pmic->subtype == PM660_SUBTYPE) { > + switch (chip->pmic->fab_id) { > + case PM660_FAB_ID_GF: > + *offset = RR_ADC_CHG_TEMP_660_GF_OFFSET_UV; > + *slope = RR_ADC_CHG_TEMP_660_GF_SLOPE_UV_PER_C; > + return 0; > + case PM660_FAB_ID_TSMC: > + *offset = RR_ADC_CHG_TEMP_660_SMIC_OFFSET_UV; > + *slope = RR_ADC_CHG_TEMP_660_SMIC_SLOPE_UV_PER_C; > + return 0; > + default: > + *offset = RR_ADC_CHG_TEMP_660_MGNA_OFFSET_UV; > + *slope = RR_ADC_CHG_TEMP_660_MGNA_SLOPE_UV_PER_C; > + } > + } else if (chip->pmic->subtype == PMI8998_SUBTYPE) { > + switch (chip->pmic->fab_id) { > + case PMI8998_FAB_ID_GF: > + *offset = RR_ADC_CHG_TEMP_GF_OFFSET_UV; > + *slope = RR_ADC_CHG_TEMP_GF_SLOPE_UV_PER_C; > + return 0; > + case PMI8998_FAB_ID_SMIC: > + *offset = RR_ADC_CHG_TEMP_SMIC_OFFSET_UV; > + *slope = RR_ADC_CHG_TEMP_SMIC_SLOPE_UV_PER_C; > + return 0; > + default: > + return -EINVAL; > + } > + } > + > + return -EINVAL; > +} > + > +/* > + * These functions explicitly cast int64_t to int. > + * They will never overflow, as the values are small enough. > + */ > +static int rradc_post_process_batt_id(struct rradc_chip *chip, u16 adc_code, > + int *result_ohms) > +{ > + uint32_t current_value; > + int64_t r_id; > + > + current_value = chip->batt_id_data; > + r_id = ((int64_t)adc_code * RR_ADC_FS_VOLTAGE_MV); > + r_id = div64_s64(r_id, (RR_ADC_CHAN_MSB * current_value)); > + *result_ohms = (int)(r_id * MILLI); > + > + return 0; > +} > + > +static int rradc_enable_continuous_mode(struct rradc_chip *chip) > +{ > + int ret; > + > + /* Clear channel log */ > + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_LOG, > + RR_ADC_LOG_CLR_CTRL, RR_ADC_LOG_CLR_CTRL); > + if (ret < 0) { > + dev_err(chip->dev, "log ctrl update to clear failed:%d\n", ret); > + return ret; > + } > + > + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_LOG, > + RR_ADC_LOG_CLR_CTRL, 0); > + if (ret < 0) { > + dev_err(chip->dev, "log ctrl update to not clear failed:%d\n", > + ret); > + return ret; > + } > + > + /* Switch to continuous mode */ > + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_CTL, > + RR_ADC_CTL_CONTINUOUS_SEL, > + RR_ADC_CTL_CONTINUOUS_SEL); > + if (ret < 0) > + dev_err(chip->dev, "Update to continuous mode failed:%d\n", > + ret); > + > + return ret; > +} > + > +static int rradc_disable_continuous_mode(struct rradc_chip *chip) > +{ > + int ret; > + > + /* Switch to non continuous mode */ > + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_CTL, > + RR_ADC_CTL_CONTINUOUS_SEL, 0); > + if (ret < 0) > + dev_err(chip->dev, "Update to non-continuous mode failed:%d\n", > + ret); > + > + return ret; > +} > + > +static bool rradc_is_ready(struct rradc_chip *chip, > + enum rradc_channel_id chan_address) > +{ > + const struct rradc_channel *chan = &rradc_chans[chan_address]; > + int ret; > + unsigned int status, mask; > + > + /* BATT_ID STS bit does not get set initially */ > + switch (chan_address) { > + case RR_ADC_BATT_ID: > + mask = RR_ADC_STS_CHANNEL_STS; > + break; > + default: > + mask = RR_ADC_STS_CHANNEL_READING_MASK; > + break; > + } > + > + ret = regmap_read(chip->regmap, chip->base + chan->status, &status); > + if (ret < 0 || !(status & mask)) > + return false; > + > + return true; > +} > + > +static int rradc_read_status_in_cont_mode(struct rradc_chip *chip, > + enum rradc_channel_id chan_address) > +{ > + const struct rradc_channel *chan = &rradc_chans[chan_address]; > + const struct iio_chan_spec *iio_chan = &rradc_iio_chans[chan_address]; > + int ret, i; > + > + if (chan->trigger_mask == 0) { > + dev_err(chip->dev, "Channel doesn't have a trigger mask\n"); > + return -EINVAL; > + } > + > + ret = regmap_update_bits(chip->regmap, chip->base + chan->trigger_addr, > + chan->trigger_mask, chan->trigger_mask); > + if (ret < 0) { > + dev_err(chip->dev, > + "Failed to apply trigger for channel '%s' ret=%d\n", > + iio_chan->extend_name, ret); > + return ret; > + } > + > + ret = rradc_enable_continuous_mode(chip); > + if (ret < 0) { > + dev_err(chip->dev, "Failed to switch to continuous mode\n"); > + goto disable_trigger; > + } > + > + /* > + * The wait/sleep values were found through trial and error, > + * this is mostly for the battery ID channel which takes some > + * time to settle. > + */ > + for (i = 0; i < 5; i++) { > + if (rradc_is_ready(chip, chan_address)) > + break; > + usleep_range(50000, 50000 + 500); > + } > + > + if (i == 5) { > + dev_err(chip->dev, "Channel '%s' is not ready\n", > + iio_chan->extend_name); > + ret = -ETIMEDOUT; > + } > + > + rradc_disable_continuous_mode(chip); > + > +disable_trigger: > + regmap_update_bits(chip->regmap, chip->base + chan->trigger_addr, > + chan->trigger_mask, 0); > + > + return ret; > +} > + > +static int rradc_prepare_batt_id_conversion(struct rradc_chip *chip, > + enum rradc_channel_id chan_address, > + u16 *data) > +{ > + int ret; > + > + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_CTRL, > + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV, > + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV); > + if (ret < 0) { > + dev_err(chip->dev, "Enabling BATT ID channel failed:%d\n", ret); > + return ret; > + } > + > + ret = regmap_update_bits(chip->regmap, > + chip->base + RR_ADC_BATT_ID_TRIGGER, > + RR_ADC_TRIGGER_CTL, RR_ADC_TRIGGER_CTL); > + if (ret < 0) { > + dev_err(chip->dev, "BATT_ID trigger set failed:%d\n", ret); > + goto out_disable_batt_id; > + } > + > + ret = rradc_read_status_in_cont_mode(chip, chan_address); > + > + /* Reset registers back to default values */ > + regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_TRIGGER, > + RR_ADC_TRIGGER_CTL, 0); > + > +out_disable_batt_id: > + regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_CTRL, > + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV, 0); > + > + return ret; > +} > + > +static int rradc_do_conversion(struct rradc_chip *chip, > + enum rradc_channel_id chan_address, u16 *data) > +{ > + const struct rradc_channel *chan = &rradc_chans[chan_address]; > + const struct iio_chan_spec *iio_chan = &rradc_iio_chans[chan_address]; > + int ret; > + __le16 buf[3]; > + > + mutex_lock(&chip->conversion_lock); > + > + switch (chan_address) { > + case RR_ADC_BATT_ID: > + ret = rradc_prepare_batt_id_conversion(chip, chan_address, data); > + if (ret < 0) { > + dev_err(chip->dev, "Battery ID conversion failed:%d\n", > + ret); > + goto unlock_out; > + } > + break; > + > + case RR_ADC_USBIN_V: > + case RR_ADC_DIE_TEMP: > + ret = rradc_read_status_in_cont_mode(chip, chan_address); > + if (ret < 0) { > + dev_err(chip->dev, > + "Error reading in continuous mode:%d\n", ret); > + goto unlock_out; > + } > + break; > + default: > + if (!rradc_is_ready(chip, chan_address)) { > + /* > + * Usually this means the channel isn't attached, for example > + * the in_voltage_usbin_v_input channel will not be ready if > + * no USB cable is attached > + */ > + dev_dbg(chip->dev, "channel '%s' is not ready\n", > + iio_chan->extend_name); > + ret = -ENODATA; > + goto unlock_out; > + } > + break; > + } > + > + ret = rradc_read(chip, chan->lsb, buf, chan->size); > + if (ret) { > + dev_err(chip->dev, "read data failed\n"); > + goto unlock_out; > + } > + > + /* > + * For the battery ID we read the register for every ID ADC and then > + * see which one is actually connected. > + */ > + if (chan_address == RR_ADC_BATT_ID) { > + u16 batt_id_150 = le16_to_cpu(buf[2]); > + u16 batt_id_15 = le16_to_cpu(buf[1]); > + u16 batt_id_5 = le16_to_cpu(buf[0]); > + > + if (!batt_id_150 && !batt_id_15 && !batt_id_5) { > + dev_err(chip->dev, > + "Invalid batt_id values with all zeros\n"); > + ret = -EINVAL; > + goto unlock_out; > + } > + > + if (batt_id_150 <= RR_ADC_BATT_ID_RANGE) { > + *data = batt_id_150; > + chip->batt_id_data = 150; > + } else if (batt_id_15 <= RR_ADC_BATT_ID_RANGE) { > + *data = batt_id_15; > + chip->batt_id_data = 15; > + } else { > + *data = batt_id_5; > + chip->batt_id_data = 5; > + } > + } else { > + /* > + * All of the other channels are either 1 or 2 bytes. > + * We can rely on the second byte being 0 for 1-byte channels. > + */ > + *data = le16_to_cpu(buf[0]); > + } > + > +unlock_out: > + mutex_unlock(&chip->conversion_lock); > + > + return ret; > +} > + > +static int rradc_read_scale(struct rradc_chip *chip, int chan_address, int *val, > + int *val2) > +{ > + int64_t fab_offset, fab_slope; > + int ret; > + > + ret = rradc_get_fab_coeff(chip, &fab_offset, &fab_slope); > + if (ret < 0) { > + dev_err(chip->dev, "Unable to get fab id coefficients\n"); > + return -EINVAL; > + } > + > + switch (chan_address) { > + case RR_ADC_SKIN_TEMP: > + *val = MILLI; > + *val2 = RR_ADC_BATT_THERM_LSB_K; > + return IIO_VAL_FRACTIONAL; > + case RR_ADC_USBIN_I: > + *val = RR_ADC_CURR_USBIN_INPUT_FACTOR_MIL * > + RR_ADC_FS_VOLTAGE_MV; > + *val2 = RR_ADC_CHAN_MSB; > + return IIO_VAL_FRACTIONAL; > + case RR_ADC_DCIN_I: > + *val = RR_ADC_CURR_INPUT_FACTOR * RR_ADC_FS_VOLTAGE_MV; > + *val2 = RR_ADC_CHAN_MSB; > + return IIO_VAL_FRACTIONAL; > + case RR_ADC_USBIN_V: > + case RR_ADC_DCIN_V: > + *val = RR_ADC_VOLT_INPUT_FACTOR * RR_ADC_FS_VOLTAGE_MV * MILLI; > + *val2 = RR_ADC_CHAN_MSB; > + return IIO_VAL_FRACTIONAL; > + case RR_ADC_GPIO: > + *val = RR_ADC_GPIO_FS_RANGE; > + *val2 = RR_ADC_CHAN_MSB; > + return IIO_VAL_FRACTIONAL; > + case RR_ADC_CHG_TEMP: > + /* > + * We divide val2 by MILLI instead of multiplying val > + * to avoid an integer overflow. > + */ > + *val = -RR_ADC_TEMP_FS_VOLTAGE_NUM; > + *val2 = div64_s64(RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * > + fab_slope, > + MILLI); > + > + return IIO_VAL_FRACTIONAL; > + case RR_ADC_DIE_TEMP: > + *val = RR_ADC_TEMP_FS_VOLTAGE_NUM; > + *val2 = RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * > + RR_ADC_DIE_TEMP_SLOPE; > + > + return IIO_VAL_FRACTIONAL; > + default: > + return -EINVAL; > + } > +} > + > +static int rradc_read_offset(struct rradc_chip *chip, int chan_address, int *val) > +{ > + int64_t fab_offset, fab_slope; > + int64_t offset1, offset2; > + int ret; > + > + switch (chan_address) { > + case RR_ADC_SKIN_TEMP: > + /* > + * Offset from kelvin to degC, divided by the > + * scale factor (250). We lose some precision here. > + * 273150 / 250 = 1092.6 > + */ > + *val = div64_s64(ABSOLUTE_ZERO_MILLICELSIUS, > + (MILLI / RR_ADC_BATT_THERM_LSB_K)); > + return IIO_VAL_INT; > + case RR_ADC_CHG_TEMP: > + ret = rradc_get_fab_coeff(chip, &fab_offset, &fab_slope); > + if (ret < 0) { > + dev_err(chip->dev, > + "Unable to get fab id coefficients\n"); > + return -EINVAL; > + } > + offset1 = -(fab_offset * RR_ADC_TEMP_FS_VOLTAGE_DEN * > + RR_ADC_CHAN_MSB); > + offset1 += (int64_t)RR_ADC_TEMP_FS_VOLTAGE_NUM / 2ULL; > + offset1 = div64_s64(offset1, > + (int64_t)(RR_ADC_TEMP_FS_VOLTAGE_NUM)); > + > + offset2 = (int64_t)RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC * > + RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * > + (int64_t)fab_slope; > + offset2 += ((int64_t)MILLI * RR_ADC_TEMP_FS_VOLTAGE_NUM) / 2; > + offset2 = div64_s64( > + offset2, ((int64_t)MILLI * RR_ADC_TEMP_FS_VOLTAGE_NUM)); > + > + /* > + * The -1 is to compensate for lost precision. > + * It should actually be -0.7906976744186046. > + * This works out to every value being off > + * by about +0.091 degrees C after applying offset and scale. > + */ > + *val = (int)(offset1 - offset2 - 1); > + return IIO_VAL_INT; > + case RR_ADC_DIE_TEMP: > + offset1 = -RR_ADC_DIE_TEMP_OFFSET * > + (int64_t)RR_ADC_TEMP_FS_VOLTAGE_DEN * > + (int64_t)RR_ADC_CHAN_MSB; > + offset1 = div64_s64(offset1, RR_ADC_TEMP_FS_VOLTAGE_NUM); > + > + offset2 = -(int64_t)RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC * > + RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * > + RR_ADC_DIE_TEMP_SLOPE; > + offset2 = div64_s64(offset2, > + ((int64_t)RR_ADC_TEMP_FS_VOLTAGE_NUM)); > + > + /* > + * The result is -339, it should be -338.69789, this results > + * in the calculated die temp being off by > + * -0.004 - -0.0175 degrees C > + */ > + *val = (int)(offset1 - offset2); > + return IIO_VAL_INT; > + default: > + break; > + } > + return -EINVAL; > +} > + > +static int rradc_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan_spec, int *val, > + int *val2, long mask) > +{ > + struct rradc_chip *chip = iio_priv(indio_dev); > + const struct rradc_channel *chan; > + int ret; > + u16 adc_code; > + > + if (chan_spec->address >= RR_ADC_CHAN_MAX) { > + dev_err(chip->dev, "Invalid channel index:%lu\n", > + chan_spec->address); > + return -EINVAL; > + } > + > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + return rradc_read_scale(chip, chan_spec->address, val, val2); > + case IIO_CHAN_INFO_OFFSET: > + return rradc_read_offset(chip, chan_spec->address, val); > + case IIO_CHAN_INFO_RAW: > + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code); > + if (ret < 0) > + return ret; > + > + *val = adc_code; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_PROCESSED: > + chan = &rradc_chans[chan_spec->address]; > + if (!chan->scale_fn) > + return -EINVAL; > + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code); > + if (ret < 0) > + return ret; > + > + *val = chan->scale_fn(chip, adc_code, val); > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > +} > + > +static int rradc_read_label(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, char *label) > +{ > + return snprintf(label, PAGE_SIZE, "%s\n", > + rradc_chans[chan->address].label); > +} > + > +static const struct iio_info rradc_info = { > + .read_raw = rradc_read_raw, > + .read_label = rradc_read_label, > +}; > + > +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX] = { > + { > + .label = "batt_id", > + .scale_fn = rradc_post_process_batt_id, > + .lsb = RR_ADC_BATT_ID_5_LSB, > + .status = RR_ADC_BATT_ID_STS, > + .size = 6, > + .trigger_addr = RR_ADC_BATT_ID_TRIGGER, > + .trigger_mask = BIT(0), > + }, { > + .label = "batt", > + .lsb = RR_ADC_BATT_THERM_LSB, > + .status = RR_ADC_BATT_THERM_STS, > + .size = 2, > + .trigger_addr = RR_ADC_BATT_THERM_TRIGGER, > + }, { > + .label = "pmi8998_skin", > + .lsb = RR_ADC_SKIN_TEMP_LSB, > + .status = RR_ADC_AUX_THERM_STS, > + .size = 2, > + .trigger_addr = RR_ADC_AUX_THERM_TRIGGER, > + }, { > + .label = "usbin_i", > + .lsb = RR_ADC_USB_IN_I_LSB, > + .status = RR_ADC_USB_IN_I_STS, > + .size = 2, > + .trigger_addr = RR_ADC_USB_IN_I_TRIGGER, > + }, { > + .label = "usbin_v", > + .lsb = RR_ADC_USB_IN_V_LSB, > + .status = RR_ADC_USB_IN_V_STS, > + .size = 2, > + .trigger_addr = RR_ADC_USB_IN_V_TRIGGER, > + .trigger_mask = BIT(7), > + }, { > + .label = "dcin_i", > + .lsb = RR_ADC_DC_IN_I_LSB, > + .status = RR_ADC_DC_IN_I_STS, > + .size = 2, > + .trigger_addr = RR_ADC_DC_IN_I_TRIGGER, > + }, { > + .label = "dcin_v", > + .lsb = RR_ADC_DC_IN_V_LSB, > + .status = RR_ADC_DC_IN_V_STS, > + .size = 2, > + .trigger_addr = RR_ADC_DC_IN_V_TRIGGER, > + }, { > + .label = "pmi8998_die", > + .lsb = RR_ADC_PMI_DIE_TEMP_LSB, > + .status = RR_ADC_PMI_DIE_TEMP_STS, > + .size = 2, > + .trigger_addr = RR_ADC_PMI_DIE_TEMP_TRIGGER, > + .trigger_mask = RR_ADC_TRIGGER_EVERY_CYCLE, > + }, { > + .label = "chg", > + .lsb = RR_ADC_CHARGER_TEMP_LSB, > + .status = RR_ADC_CHARGER_TEMP_STS, > + .size = 2, > + .trigger_addr = RR_ADC_CHARGER_TEMP_TRIGGER, > + }, { > + .label = "gpio", > + .lsb = RR_ADC_GPIO_LSB, > + .status = RR_ADC_GPIO_STS, > + .size = 2, > + .trigger_addr = RR_ADC_GPIO_TRIGGER, > + }, > +}; > + > +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX] = { > + { > + .type = IIO_RESISTANCE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .address = RR_ADC_BATT_ID, > + .channel = 0, > + .indexed = 1, > + }, { > + .type = IIO_TEMP, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .address = RR_ADC_BATT_THERM, > + .channel = 0, > + .indexed = 1, > + }, { > + .type = IIO_TEMP, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_OFFSET), > + .address = RR_ADC_SKIN_TEMP, > + .channel = 1, > + .indexed = 1, > + }, { > + .type = IIO_CURRENT, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE), > + .address = RR_ADC_USBIN_I, > + .channel = 0, > + .indexed = 1, > + }, { > + .type = IIO_VOLTAGE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE), > + .address = RR_ADC_USBIN_V, > + .channel = 0, > + .indexed = 1, > + }, { > + .type = IIO_CURRENT, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE), > + .address = RR_ADC_DCIN_I, > + .channel = 1, > + .indexed = 1, > + }, { > + .type = IIO_VOLTAGE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE), > + .address = RR_ADC_DCIN_V, > + .channel = 1, > + .indexed = 1, > + }, { > + .type = IIO_TEMP, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_OFFSET), > + .address = RR_ADC_DIE_TEMP, > + .channel = 2, > + .indexed = 1, > + }, { > + .type = IIO_TEMP, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_OFFSET) | > + BIT(IIO_CHAN_INFO_SCALE), > + .address = RR_ADC_CHG_TEMP, > + .channel = 3, > + .indexed = 1, > + }, { > + .type = IIO_VOLTAGE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE), > + .address = RR_ADC_GPIO, > + .channel = 2, > + .indexed = 1, > + }, > +}; > + > +static int rradc_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct iio_dev *indio_dev; > + struct rradc_chip *chip; > + int ret, i, batt_id_delay; > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*chip)); > + if (!indio_dev) > + return -ENOMEM; > + > + chip = iio_priv(indio_dev); > + chip->regmap = dev_get_regmap(pdev->dev.parent, NULL); > + if (!chip->regmap) { > + dev_err(dev, "Couldn't get parent's regmap\n"); > + return -EINVAL; > + } > + > + chip->dev = dev; > + mutex_init(&chip->conversion_lock); > + > + ret = device_property_read_u32(dev, "reg", &chip->base); > + if (ret < 0) { > + dev_err(chip->dev, "Couldn't find reg address, ret = %d\n", > + ret); > + return ret; > + } > + > + batt_id_delay = -1; > + ret = device_property_read_u32(dev, "qcom,batt-id-delay-ms", > + &batt_id_delay); > + if (!ret) { > + for (i = 0; i < RRADC_BATT_ID_DELAY_MAX; i++) { > + if (batt_id_delay == batt_id_delays[i]) > + break; > + } > + if (i == RRADC_BATT_ID_DELAY_MAX) > + batt_id_delay = -1; > + } > + > + if (batt_id_delay >= 0) { > + batt_id_delay = FIELD_PREP(BATT_ID_SETTLE_MASK, batt_id_delay); > + ret = regmap_update_bits(chip->regmap, > + chip->base + RR_ADC_BATT_ID_CFG, > + batt_id_delay, batt_id_delay); > + if (ret < 0) { > + dev_err(chip->dev, > + "BATT_ID settling time config failed:%d\n", > + ret); > + } > + } > + > + /* Get the PMIC revision, we need it to handle some varying coefficients */ > + chip->pmic = qcom_pmic_get(chip->dev); > + if (IS_ERR(chip->pmic)) { > + dev_err(chip->dev, "Unable to get reference to PMIC device\n"); > + return PTR_ERR(chip->pmic); > + } > + > + switch (chip->pmic->subtype) { > + case PMI8998_SUBTYPE: > + indio_dev->name = "pmi8998-rradc"; > + break; > + case PM660_SUBTYPE: > + indio_dev->name = "pm660-rradc"; > + break; > + default: > + indio_dev->name = DRIVER_NAME; > + break; > + } > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->info = &rradc_info; > + indio_dev->channels = rradc_iio_chans; > + indio_dev->num_channels = ARRAY_SIZE(rradc_iio_chans); > + > + return devm_iio_device_register(dev, indio_dev); > +} > + > +static const struct of_device_id rradc_match_table[] = { > + { .compatible = "qcom,pm660-rradc" }, > + { .compatible = "qcom,pmi8998-rradc" }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, rradc_match_table); > + > +static struct platform_driver rradc_driver = { > + .driver = { > + .name = DRIVER_NAME, > + .of_match_table = rradc_match_table, > + }, > + .probe = rradc_probe, > +}; > +module_platform_driver(rradc_driver); > + > +MODULE_DESCRIPTION("QCOM SPMI PMIC RR ADC driver"); > +MODULE_AUTHOR("Caleb Connolly <caleb.connolly@linaro.org>"); > +MODULE_LICENSE("GPL v2");
On Sun 27 Mar 08:03 PDT 2022, Jonathan Cameron wrote: > On Wed, 23 Mar 2022 16:28:16 +0000 > Caleb Connolly <caleb.connolly@linaro.org> wrote: > > > From: Caleb Connolly <caleb.connolly@linaro.org> > > > > The Round Robin ADC is responsible for reading data about the rate of > > charge from the USB or DC input ports, it can also read the battery > > ID (resistence), skin temperature and the die temperature of the pmic. > > It is found on the PMI8998 and PM660 Qualcomm PMICs. > > > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > Whilst I said this patch was fine a few versions ago I didn't add a tag > on basis I would probably end up picking it up. > > To make things more flexible, I'll add one and either Lee or I can > do the immutable branch once Lee has had a chance to take a look and > is happy with the mfd parts. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Are either of you planning to pick up the driver changes? The dts changes can be merged independently, so I would prefer to pick those through my tree. But I would like to know that the binding and implementation is agreed upon before doing so. Thanks, Bjorn
On Tue, 12 Apr 2022 20:08:03 -0700 Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > On Sun 27 Mar 08:03 PDT 2022, Jonathan Cameron wrote: > > > On Wed, 23 Mar 2022 16:28:16 +0000 > > Caleb Connolly <caleb.connolly@linaro.org> wrote: > > > > > From: Caleb Connolly <caleb.connolly@linaro.org> > > > > > > The Round Robin ADC is responsible for reading data about the rate of > > > charge from the USB or DC input ports, it can also read the battery > > > ID (resistence), skin temperature and the die temperature of the pmic. > > > It is found on the PMI8998 and PM660 Qualcomm PMICs. > > > > > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > > Whilst I said this patch was fine a few versions ago I didn't add a tag > > on basis I would probably end up picking it up. > > > > To make things more flexible, I'll add one and either Lee or I can > > do the immutable branch once Lee has had a chance to take a look and > > is happy with the mfd parts. > > > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > > Are either of you planning to pick up the driver changes? > > The dts changes can be merged independently, so I would prefer to pick > those through my tree. But I would like to know that the binding and > implementation is agreed upon before doing so. I need an Ack from Lee for the mfd changes and ideally Stephen for the SPMI patch. Lee, guessing you are busy, but if you have a chance to check this set over that would be great. Jonathan > > Thanks, > Bjorn
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 4fdc8bfbb407..66557b434fa8 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -812,6 +812,18 @@ config QCOM_PM8XXX_XOADC To compile this driver as a module, choose M here: the module will be called qcom-pm8xxx-xoadc. +config QCOM_SPMI_RRADC + tristate "Qualcomm SPMI RRADC" + depends on MFD_SPMI_PMIC + help + This is for the PMIC Round Robin ADC driver. + + This driver exposes the battery ID resistor, battery thermal, PMIC die + temperature, charger USB in and DC in voltage and current. + + To compile this driver as a module, choose M here: the module will + be called qcom-qpmi-rradc. + config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 4a8f1833993b..b0dd7f142abd 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_NPCM_ADC) += npcm_adc.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o +obj-$(CONFIG_QCOM_SPMI_RRADC) += qcom-spmi-rradc.o obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o diff --git a/drivers/iio/adc/qcom-spmi-rradc.c b/drivers/iio/adc/qcom-spmi-rradc.c new file mode 100644 index 000000000000..230477fc45d2 --- /dev/null +++ b/drivers/iio/adc/qcom-spmi-rradc.c @@ -0,0 +1,1021 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2017, 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Linaro Limited. + * Author: Caleb Connolly <caleb.connolly@linaro.org> + * + * This driver is for the Round Robin ADC found in the pmi8998 and pm660 PMICs. + */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/spmi.h> +#include <linux/types.h> +#include <linux/units.h> + +#include <asm/unaligned.h> + +#include <linux/iio/iio.h> +#include <linux/iio/types.h> + +#include <soc/qcom/qcom-spmi-pmic.h> + +#define DRIVER_NAME "qcom-spmi-rradc" + +#define RR_ADC_EN_CTL 0x46 +#define RR_ADC_SKIN_TEMP_LSB 0x50 +#define RR_ADC_SKIN_TEMP_MSB 0x51 +#define RR_ADC_CTL 0x52 +#define RR_ADC_CTL_CONTINUOUS_SEL BIT(3) +#define RR_ADC_LOG 0x53 +#define RR_ADC_LOG_CLR_CTRL BIT(0) + +#define RR_ADC_FAKE_BATT_LOW_LSB 0x58 +#define RR_ADC_FAKE_BATT_LOW_MSB 0x59 +#define RR_ADC_FAKE_BATT_HIGH_LSB 0x5A +#define RR_ADC_FAKE_BATT_HIGH_MSB 0x5B + +#define RR_ADC_BATT_ID_CTRL 0x60 +#define RR_ADC_BATT_ID_CTRL_CHANNEL_CONV BIT(0) +#define RR_ADC_BATT_ID_TRIGGER 0x61 +#define RR_ADC_BATT_ID_STS 0x62 +#define RR_ADC_BATT_ID_CFG 0x63 +#define BATT_ID_SETTLE_MASK GENMASK(7, 5) +#define RR_ADC_BATT_ID_5_LSB 0x66 +#define RR_ADC_BATT_ID_5_MSB 0x67 +#define RR_ADC_BATT_ID_15_LSB 0x68 +#define RR_ADC_BATT_ID_15_MSB 0x69 +#define RR_ADC_BATT_ID_150_LSB 0x6A +#define RR_ADC_BATT_ID_150_MSB 0x6B + +#define RR_ADC_BATT_THERM_CTRL 0x70 +#define RR_ADC_BATT_THERM_TRIGGER 0x71 +#define RR_ADC_BATT_THERM_STS 0x72 +#define RR_ADC_BATT_THERM_CFG 0x73 +#define RR_ADC_BATT_THERM_LSB 0x74 +#define RR_ADC_BATT_THERM_MSB 0x75 +#define RR_ADC_BATT_THERM_FREQ 0x76 + +#define RR_ADC_AUX_THERM_CTRL 0x80 +#define RR_ADC_AUX_THERM_TRIGGER 0x81 +#define RR_ADC_AUX_THERM_STS 0x82 +#define RR_ADC_AUX_THERM_CFG 0x83 +#define RR_ADC_AUX_THERM_LSB 0x84 +#define RR_ADC_AUX_THERM_MSB 0x85 + +#define RR_ADC_SKIN_HOT 0x86 +#define RR_ADC_SKIN_TOO_HOT 0x87 + +#define RR_ADC_AUX_THERM_C1 0x88 +#define RR_ADC_AUX_THERM_C2 0x89 +#define RR_ADC_AUX_THERM_C3 0x8A +#define RR_ADC_AUX_THERM_HALF_RANGE 0x8B + +#define RR_ADC_USB_IN_V_CTRL 0x90 +#define RR_ADC_USB_IN_V_TRIGGER 0x91 +#define RR_ADC_USB_IN_V_STS 0x92 +#define RR_ADC_USB_IN_V_LSB 0x94 +#define RR_ADC_USB_IN_V_MSB 0x95 +#define RR_ADC_USB_IN_I_CTRL 0x98 +#define RR_ADC_USB_IN_I_TRIGGER 0x99 +#define RR_ADC_USB_IN_I_STS 0x9A +#define RR_ADC_USB_IN_I_LSB 0x9C +#define RR_ADC_USB_IN_I_MSB 0x9D + +#define RR_ADC_DC_IN_V_CTRL 0xA0 +#define RR_ADC_DC_IN_V_TRIGGER 0xA1 +#define RR_ADC_DC_IN_V_STS 0xA2 +#define RR_ADC_DC_IN_V_LSB 0xA4 +#define RR_ADC_DC_IN_V_MSB 0xA5 +#define RR_ADC_DC_IN_I_CTRL 0xA8 +#define RR_ADC_DC_IN_I_TRIGGER 0xA9 +#define RR_ADC_DC_IN_I_STS 0xAA +#define RR_ADC_DC_IN_I_LSB 0xAC +#define RR_ADC_DC_IN_I_MSB 0xAD + +#define RR_ADC_PMI_DIE_TEMP_CTRL 0xB0 +#define RR_ADC_PMI_DIE_TEMP_TRIGGER 0xB1 +#define RR_ADC_PMI_DIE_TEMP_STS 0xB2 +#define RR_ADC_PMI_DIE_TEMP_CFG 0xB3 +#define RR_ADC_PMI_DIE_TEMP_LSB 0xB4 +#define RR_ADC_PMI_DIE_TEMP_MSB 0xB5 + +#define RR_ADC_CHARGER_TEMP_CTRL 0xB8 +#define RR_ADC_CHARGER_TEMP_TRIGGER 0xB9 +#define RR_ADC_CHARGER_TEMP_STS 0xBA +#define RR_ADC_CHARGER_TEMP_CFG 0xBB +#define RR_ADC_CHARGER_TEMP_LSB 0xBC +#define RR_ADC_CHARGER_TEMP_MSB 0xBD +#define RR_ADC_CHARGER_HOT 0xBE +#define RR_ADC_CHARGER_TOO_HOT 0xBF + +#define RR_ADC_GPIO_CTRL 0xC0 +#define RR_ADC_GPIO_TRIGGER 0xC1 +#define RR_ADC_GPIO_STS 0xC2 +#define RR_ADC_GPIO_LSB 0xC4 +#define RR_ADC_GPIO_MSB 0xC5 + +#define RR_ADC_ATEST_CTRL 0xC8 +#define RR_ADC_ATEST_TRIGGER 0xC9 +#define RR_ADC_ATEST_STS 0xCA +#define RR_ADC_ATEST_LSB 0xCC +#define RR_ADC_ATEST_MSB 0xCD +#define RR_ADC_SEC_ACCESS 0xD0 + +#define RR_ADC_PERPH_RESET_CTL2 0xD9 +#define RR_ADC_PERPH_RESET_CTL3 0xDA +#define RR_ADC_PERPH_RESET_CTL4 0xDB +#define RR_ADC_INT_TEST1 0xE0 +#define RR_ADC_INT_TEST_VAL 0xE1 + +#define RR_ADC_TM_TRIGGER_CTRLS 0xE2 +#define RR_ADC_TM_ADC_CTRLS 0xE3 +#define RR_ADC_TM_CNL_CTRL 0xE4 +#define RR_ADC_TM_BATT_ID_CTRL 0xE5 +#define RR_ADC_TM_THERM_CTRL 0xE6 +#define RR_ADC_TM_CONV_STS 0xE7 +#define RR_ADC_TM_ADC_READ_LSB 0xE8 +#define RR_ADC_TM_ADC_READ_MSB 0xE9 +#define RR_ADC_TM_ATEST_MUX_1 0xEA +#define RR_ADC_TM_ATEST_MUX_2 0xEB +#define RR_ADC_TM_REFERENCES 0xED +#define RR_ADC_TM_MISC_CTL 0xEE +#define RR_ADC_TM_RR_CTRL 0xEF + +#define RR_ADC_TRIGGER_EVERY_CYCLE BIT(7) +#define RR_ADC_TRIGGER_CTL BIT(0) + +#define RR_ADC_BATT_ID_RANGE 820 + +#define RR_ADC_BITS 10 +#define RR_ADC_CHAN_MSB (1 << RR_ADC_BITS) +#define RR_ADC_FS_VOLTAGE_MV 2500 + +/* BATT_THERM 0.25K/LSB */ +#define RR_ADC_BATT_THERM_LSB_K 4 + +#define RR_ADC_TEMP_FS_VOLTAGE_NUM 5000000 +#define RR_ADC_TEMP_FS_VOLTAGE_DEN 3 +#define RR_ADC_DIE_TEMP_OFFSET 601400 +#define RR_ADC_DIE_TEMP_SLOPE 2 +#define RR_ADC_DIE_TEMP_OFFSET_MILLI_DEGC 25000 + +#define RR_ADC_CHG_TEMP_GF_OFFSET_UV 1303168 +#define RR_ADC_CHG_TEMP_GF_SLOPE_UV_PER_C 3784 +#define RR_ADC_CHG_TEMP_SMIC_OFFSET_UV 1338433 +#define RR_ADC_CHG_TEMP_SMIC_SLOPE_UV_PER_C 3655 +#define RR_ADC_CHG_TEMP_660_GF_OFFSET_UV 1309001 +#define RR_ADC_CHG_TEMP_660_GF_SLOPE_UV_PER_C 3403 +#define RR_ADC_CHG_TEMP_660_SMIC_OFFSET_UV 1295898 +#define RR_ADC_CHG_TEMP_660_SMIC_SLOPE_UV_PER_C 3596 +#define RR_ADC_CHG_TEMP_660_MGNA_OFFSET_UV 1314779 +#define RR_ADC_CHG_TEMP_660_MGNA_SLOPE_UV_PER_C 3496 +#define RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC 25000 +#define RR_ADC_CHG_THRESHOLD_SCALE 4 + +#define RR_ADC_VOLT_INPUT_FACTOR 8 +#define RR_ADC_CURR_INPUT_FACTOR 2000 +#define RR_ADC_CURR_USBIN_INPUT_FACTOR_MIL 1886 +#define RR_ADC_CURR_USBIN_660_FACTOR_MIL 9 +#define RR_ADC_CURR_USBIN_660_UV_VAL 579500 + +#define RR_ADC_GPIO_FS_RANGE 5000 +#define RR_ADC_COHERENT_CHECK_RETRY 5 +#define RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN 16 + +#define RR_ADC_STS_CHANNEL_READING_MASK GENMASK(1, 0) +#define RR_ADC_STS_CHANNEL_STS BIT(1) + +#define RR_ADC_TP_REV_VERSION1 21 +#define RR_ADC_TP_REV_VERSION2 29 +#define RR_ADC_TP_REV_VERSION3 32 + +#define RRADC_BATT_ID_DELAY_MAX 8 + +enum rradc_channel_id { + RR_ADC_BATT_ID = 0, + RR_ADC_BATT_THERM, + RR_ADC_SKIN_TEMP, + RR_ADC_USBIN_I, + RR_ADC_USBIN_V, + RR_ADC_DCIN_I, + RR_ADC_DCIN_V, + RR_ADC_DIE_TEMP, + RR_ADC_CHG_TEMP, + RR_ADC_GPIO, + RR_ADC_CHAN_MAX +}; + +struct rradc_chip; + +/** + * struct rradc_channel - rradc channel data + * @label: channel label + * @lsb: Channel least significant byte + * @status: Channel status address + * @size: number of bytes to read + * @trigger_addr: Trigger address, trigger is only used on some channels + * @trigger_mask: Trigger mask + * @scale_fn: Post process callback for channels which can't be exposed + * as offset + scale. + */ +struct rradc_channel { + const char *label; + u8 lsb; + u8 status; + int size; + int trigger_addr; + int trigger_mask; + int (*scale_fn)(struct rradc_chip *chip, u16 adc_code, int *result); +}; + +struct rradc_chip { + struct device *dev; + const struct qcom_spmi_pmic *pmic; + /* + * Lock held while doing channel conversion + * involving multiple register read/writes + */ + struct mutex conversion_lock; + struct regmap *regmap; + u32 base; + int batt_id_delay; + u16 batt_id_data; +}; + +static const int batt_id_delays[] = { 0, 1, 4, 12, 20, 40, 60, 80 }; +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX]; +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX]; + +static int rradc_read(struct rradc_chip *chip, u16 addr, __le16 *buf, int len) +{ + int ret, retry_cnt = 0; + __le16 data_check[RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN / 2]; + + if (len > RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN) { + dev_err(chip->dev, + "Can't read more than %d bytes, but asked to read %d bytes.\n", + RR_ADC_CHAN_MAX_CONTINUOUS_BUFFER_LEN, len); + return -EINVAL; + } + + while (retry_cnt < RR_ADC_COHERENT_CHECK_RETRY) { + ret = regmap_bulk_read(chip->regmap, chip->base + addr, buf, + len); + if (ret < 0) { + dev_err(chip->dev, "rr_adc reg 0x%x failed :%d\n", addr, + ret); + return ret; + } + + ret = regmap_bulk_read(chip->regmap, chip->base + addr, + data_check, len); + if (ret < 0) { + dev_err(chip->dev, "rr_adc reg 0x%x failed :%d\n", addr, + ret); + return ret; + } + + if (memcmp(buf, data_check, len) != 0) { + retry_cnt++; + dev_dbg(chip->dev, + "coherent read error, retry_cnt:%d\n", + retry_cnt); + continue; + } + + break; + } + + if (retry_cnt == RR_ADC_COHERENT_CHECK_RETRY) + dev_err(chip->dev, "Retry exceeded for coherrency check\n"); + + return ret; +} + +static int rradc_get_fab_coeff(struct rradc_chip *chip, int64_t *offset, + int64_t *slope) +{ + if (chip->pmic->subtype == PM660_SUBTYPE) { + switch (chip->pmic->fab_id) { + case PM660_FAB_ID_GF: + *offset = RR_ADC_CHG_TEMP_660_GF_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_660_GF_SLOPE_UV_PER_C; + return 0; + case PM660_FAB_ID_TSMC: + *offset = RR_ADC_CHG_TEMP_660_SMIC_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_660_SMIC_SLOPE_UV_PER_C; + return 0; + default: + *offset = RR_ADC_CHG_TEMP_660_MGNA_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_660_MGNA_SLOPE_UV_PER_C; + } + } else if (chip->pmic->subtype == PMI8998_SUBTYPE) { + switch (chip->pmic->fab_id) { + case PMI8998_FAB_ID_GF: + *offset = RR_ADC_CHG_TEMP_GF_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_GF_SLOPE_UV_PER_C; + return 0; + case PMI8998_FAB_ID_SMIC: + *offset = RR_ADC_CHG_TEMP_SMIC_OFFSET_UV; + *slope = RR_ADC_CHG_TEMP_SMIC_SLOPE_UV_PER_C; + return 0; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +/* + * These functions explicitly cast int64_t to int. + * They will never overflow, as the values are small enough. + */ +static int rradc_post_process_batt_id(struct rradc_chip *chip, u16 adc_code, + int *result_ohms) +{ + uint32_t current_value; + int64_t r_id; + + current_value = chip->batt_id_data; + r_id = ((int64_t)adc_code * RR_ADC_FS_VOLTAGE_MV); + r_id = div64_s64(r_id, (RR_ADC_CHAN_MSB * current_value)); + *result_ohms = (int)(r_id * MILLI); + + return 0; +} + +static int rradc_enable_continuous_mode(struct rradc_chip *chip) +{ + int ret; + + /* Clear channel log */ + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_LOG, + RR_ADC_LOG_CLR_CTRL, RR_ADC_LOG_CLR_CTRL); + if (ret < 0) { + dev_err(chip->dev, "log ctrl update to clear failed:%d\n", ret); + return ret; + } + + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_LOG, + RR_ADC_LOG_CLR_CTRL, 0); + if (ret < 0) { + dev_err(chip->dev, "log ctrl update to not clear failed:%d\n", + ret); + return ret; + } + + /* Switch to continuous mode */ + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_CTL, + RR_ADC_CTL_CONTINUOUS_SEL, + RR_ADC_CTL_CONTINUOUS_SEL); + if (ret < 0) + dev_err(chip->dev, "Update to continuous mode failed:%d\n", + ret); + + return ret; +} + +static int rradc_disable_continuous_mode(struct rradc_chip *chip) +{ + int ret; + + /* Switch to non continuous mode */ + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_CTL, + RR_ADC_CTL_CONTINUOUS_SEL, 0); + if (ret < 0) + dev_err(chip->dev, "Update to non-continuous mode failed:%d\n", + ret); + + return ret; +} + +static bool rradc_is_ready(struct rradc_chip *chip, + enum rradc_channel_id chan_address) +{ + const struct rradc_channel *chan = &rradc_chans[chan_address]; + int ret; + unsigned int status, mask; + + /* BATT_ID STS bit does not get set initially */ + switch (chan_address) { + case RR_ADC_BATT_ID: + mask = RR_ADC_STS_CHANNEL_STS; + break; + default: + mask = RR_ADC_STS_CHANNEL_READING_MASK; + break; + } + + ret = regmap_read(chip->regmap, chip->base + chan->status, &status); + if (ret < 0 || !(status & mask)) + return false; + + return true; +} + +static int rradc_read_status_in_cont_mode(struct rradc_chip *chip, + enum rradc_channel_id chan_address) +{ + const struct rradc_channel *chan = &rradc_chans[chan_address]; + const struct iio_chan_spec *iio_chan = &rradc_iio_chans[chan_address]; + int ret, i; + + if (chan->trigger_mask == 0) { + dev_err(chip->dev, "Channel doesn't have a trigger mask\n"); + return -EINVAL; + } + + ret = regmap_update_bits(chip->regmap, chip->base + chan->trigger_addr, + chan->trigger_mask, chan->trigger_mask); + if (ret < 0) { + dev_err(chip->dev, + "Failed to apply trigger for channel '%s' ret=%d\n", + iio_chan->extend_name, ret); + return ret; + } + + ret = rradc_enable_continuous_mode(chip); + if (ret < 0) { + dev_err(chip->dev, "Failed to switch to continuous mode\n"); + goto disable_trigger; + } + + /* + * The wait/sleep values were found through trial and error, + * this is mostly for the battery ID channel which takes some + * time to settle. + */ + for (i = 0; i < 5; i++) { + if (rradc_is_ready(chip, chan_address)) + break; + usleep_range(50000, 50000 + 500); + } + + if (i == 5) { + dev_err(chip->dev, "Channel '%s' is not ready\n", + iio_chan->extend_name); + ret = -ETIMEDOUT; + } + + rradc_disable_continuous_mode(chip); + +disable_trigger: + regmap_update_bits(chip->regmap, chip->base + chan->trigger_addr, + chan->trigger_mask, 0); + + return ret; +} + +static int rradc_prepare_batt_id_conversion(struct rradc_chip *chip, + enum rradc_channel_id chan_address, + u16 *data) +{ + int ret; + + ret = regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_CTRL, + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV, + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV); + if (ret < 0) { + dev_err(chip->dev, "Enabling BATT ID channel failed:%d\n", ret); + return ret; + } + + ret = regmap_update_bits(chip->regmap, + chip->base + RR_ADC_BATT_ID_TRIGGER, + RR_ADC_TRIGGER_CTL, RR_ADC_TRIGGER_CTL); + if (ret < 0) { + dev_err(chip->dev, "BATT_ID trigger set failed:%d\n", ret); + goto out_disable_batt_id; + } + + ret = rradc_read_status_in_cont_mode(chip, chan_address); + + /* Reset registers back to default values */ + regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_TRIGGER, + RR_ADC_TRIGGER_CTL, 0); + +out_disable_batt_id: + regmap_update_bits(chip->regmap, chip->base + RR_ADC_BATT_ID_CTRL, + RR_ADC_BATT_ID_CTRL_CHANNEL_CONV, 0); + + return ret; +} + +static int rradc_do_conversion(struct rradc_chip *chip, + enum rradc_channel_id chan_address, u16 *data) +{ + const struct rradc_channel *chan = &rradc_chans[chan_address]; + const struct iio_chan_spec *iio_chan = &rradc_iio_chans[chan_address]; + int ret; + __le16 buf[3]; + + mutex_lock(&chip->conversion_lock); + + switch (chan_address) { + case RR_ADC_BATT_ID: + ret = rradc_prepare_batt_id_conversion(chip, chan_address, data); + if (ret < 0) { + dev_err(chip->dev, "Battery ID conversion failed:%d\n", + ret); + goto unlock_out; + } + break; + + case RR_ADC_USBIN_V: + case RR_ADC_DIE_TEMP: + ret = rradc_read_status_in_cont_mode(chip, chan_address); + if (ret < 0) { + dev_err(chip->dev, + "Error reading in continuous mode:%d\n", ret); + goto unlock_out; + } + break; + default: + if (!rradc_is_ready(chip, chan_address)) { + /* + * Usually this means the channel isn't attached, for example + * the in_voltage_usbin_v_input channel will not be ready if + * no USB cable is attached + */ + dev_dbg(chip->dev, "channel '%s' is not ready\n", + iio_chan->extend_name); + ret = -ENODATA; + goto unlock_out; + } + break; + } + + ret = rradc_read(chip, chan->lsb, buf, chan->size); + if (ret) { + dev_err(chip->dev, "read data failed\n"); + goto unlock_out; + } + + /* + * For the battery ID we read the register for every ID ADC and then + * see which one is actually connected. + */ + if (chan_address == RR_ADC_BATT_ID) { + u16 batt_id_150 = le16_to_cpu(buf[2]); + u16 batt_id_15 = le16_to_cpu(buf[1]); + u16 batt_id_5 = le16_to_cpu(buf[0]); + + if (!batt_id_150 && !batt_id_15 && !batt_id_5) { + dev_err(chip->dev, + "Invalid batt_id values with all zeros\n"); + ret = -EINVAL; + goto unlock_out; + } + + if (batt_id_150 <= RR_ADC_BATT_ID_RANGE) { + *data = batt_id_150; + chip->batt_id_data = 150; + } else if (batt_id_15 <= RR_ADC_BATT_ID_RANGE) { + *data = batt_id_15; + chip->batt_id_data = 15; + } else { + *data = batt_id_5; + chip->batt_id_data = 5; + } + } else { + /* + * All of the other channels are either 1 or 2 bytes. + * We can rely on the second byte being 0 for 1-byte channels. + */ + *data = le16_to_cpu(buf[0]); + } + +unlock_out: + mutex_unlock(&chip->conversion_lock); + + return ret; +} + +static int rradc_read_scale(struct rradc_chip *chip, int chan_address, int *val, + int *val2) +{ + int64_t fab_offset, fab_slope; + int ret; + + ret = rradc_get_fab_coeff(chip, &fab_offset, &fab_slope); + if (ret < 0) { + dev_err(chip->dev, "Unable to get fab id coefficients\n"); + return -EINVAL; + } + + switch (chan_address) { + case RR_ADC_SKIN_TEMP: + *val = MILLI; + *val2 = RR_ADC_BATT_THERM_LSB_K; + return IIO_VAL_FRACTIONAL; + case RR_ADC_USBIN_I: + *val = RR_ADC_CURR_USBIN_INPUT_FACTOR_MIL * + RR_ADC_FS_VOLTAGE_MV; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_DCIN_I: + *val = RR_ADC_CURR_INPUT_FACTOR * RR_ADC_FS_VOLTAGE_MV; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_USBIN_V: + case RR_ADC_DCIN_V: + *val = RR_ADC_VOLT_INPUT_FACTOR * RR_ADC_FS_VOLTAGE_MV * MILLI; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_GPIO: + *val = RR_ADC_GPIO_FS_RANGE; + *val2 = RR_ADC_CHAN_MSB; + return IIO_VAL_FRACTIONAL; + case RR_ADC_CHG_TEMP: + /* + * We divide val2 by MILLI instead of multiplying val + * to avoid an integer overflow. + */ + *val = -RR_ADC_TEMP_FS_VOLTAGE_NUM; + *val2 = div64_s64(RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + fab_slope, + MILLI); + + return IIO_VAL_FRACTIONAL; + case RR_ADC_DIE_TEMP: + *val = RR_ADC_TEMP_FS_VOLTAGE_NUM; + *val2 = RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + RR_ADC_DIE_TEMP_SLOPE; + + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } +} + +static int rradc_read_offset(struct rradc_chip *chip, int chan_address, int *val) +{ + int64_t fab_offset, fab_slope; + int64_t offset1, offset2; + int ret; + + switch (chan_address) { + case RR_ADC_SKIN_TEMP: + /* + * Offset from kelvin to degC, divided by the + * scale factor (250). We lose some precision here. + * 273150 / 250 = 1092.6 + */ + *val = div64_s64(ABSOLUTE_ZERO_MILLICELSIUS, + (MILLI / RR_ADC_BATT_THERM_LSB_K)); + return IIO_VAL_INT; + case RR_ADC_CHG_TEMP: + ret = rradc_get_fab_coeff(chip, &fab_offset, &fab_slope); + if (ret < 0) { + dev_err(chip->dev, + "Unable to get fab id coefficients\n"); + return -EINVAL; + } + offset1 = -(fab_offset * RR_ADC_TEMP_FS_VOLTAGE_DEN * + RR_ADC_CHAN_MSB); + offset1 += (int64_t)RR_ADC_TEMP_FS_VOLTAGE_NUM / 2ULL; + offset1 = div64_s64(offset1, + (int64_t)(RR_ADC_TEMP_FS_VOLTAGE_NUM)); + + offset2 = (int64_t)RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC * + RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + (int64_t)fab_slope; + offset2 += ((int64_t)MILLI * RR_ADC_TEMP_FS_VOLTAGE_NUM) / 2; + offset2 = div64_s64( + offset2, ((int64_t)MILLI * RR_ADC_TEMP_FS_VOLTAGE_NUM)); + + /* + * The -1 is to compensate for lost precision. + * It should actually be -0.7906976744186046. + * This works out to every value being off + * by about +0.091 degrees C after applying offset and scale. + */ + *val = (int)(offset1 - offset2 - 1); + return IIO_VAL_INT; + case RR_ADC_DIE_TEMP: + offset1 = -RR_ADC_DIE_TEMP_OFFSET * + (int64_t)RR_ADC_TEMP_FS_VOLTAGE_DEN * + (int64_t)RR_ADC_CHAN_MSB; + offset1 = div64_s64(offset1, RR_ADC_TEMP_FS_VOLTAGE_NUM); + + offset2 = -(int64_t)RR_ADC_CHG_TEMP_OFFSET_MILLI_DEGC * + RR_ADC_TEMP_FS_VOLTAGE_DEN * RR_ADC_CHAN_MSB * + RR_ADC_DIE_TEMP_SLOPE; + offset2 = div64_s64(offset2, + ((int64_t)RR_ADC_TEMP_FS_VOLTAGE_NUM)); + + /* + * The result is -339, it should be -338.69789, this results + * in the calculated die temp being off by + * -0.004 - -0.0175 degrees C + */ + *val = (int)(offset1 - offset2); + return IIO_VAL_INT; + default: + break; + } + return -EINVAL; +} + +static int rradc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan_spec, int *val, + int *val2, long mask) +{ + struct rradc_chip *chip = iio_priv(indio_dev); + const struct rradc_channel *chan; + int ret; + u16 adc_code; + + if (chan_spec->address >= RR_ADC_CHAN_MAX) { + dev_err(chip->dev, "Invalid channel index:%lu\n", + chan_spec->address); + return -EINVAL; + } + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return rradc_read_scale(chip, chan_spec->address, val, val2); + case IIO_CHAN_INFO_OFFSET: + return rradc_read_offset(chip, chan_spec->address, val); + case IIO_CHAN_INFO_RAW: + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code); + if (ret < 0) + return ret; + + *val = adc_code; + return IIO_VAL_INT; + case IIO_CHAN_INFO_PROCESSED: + chan = &rradc_chans[chan_spec->address]; + if (!chan->scale_fn) + return -EINVAL; + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code); + if (ret < 0) + return ret; + + *val = chan->scale_fn(chip, adc_code, val); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int rradc_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, char *label) +{ + return snprintf(label, PAGE_SIZE, "%s\n", + rradc_chans[chan->address].label); +} + +static const struct iio_info rradc_info = { + .read_raw = rradc_read_raw, + .read_label = rradc_read_label, +}; + +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX] = { + { + .label = "batt_id", + .scale_fn = rradc_post_process_batt_id, + .lsb = RR_ADC_BATT_ID_5_LSB, + .status = RR_ADC_BATT_ID_STS, + .size = 6, + .trigger_addr = RR_ADC_BATT_ID_TRIGGER, + .trigger_mask = BIT(0), + }, { + .label = "batt", + .lsb = RR_ADC_BATT_THERM_LSB, + .status = RR_ADC_BATT_THERM_STS, + .size = 2, + .trigger_addr = RR_ADC_BATT_THERM_TRIGGER, + }, { + .label = "pmi8998_skin", + .lsb = RR_ADC_SKIN_TEMP_LSB, + .status = RR_ADC_AUX_THERM_STS, + .size = 2, + .trigger_addr = RR_ADC_AUX_THERM_TRIGGER, + }, { + .label = "usbin_i", + .lsb = RR_ADC_USB_IN_I_LSB, + .status = RR_ADC_USB_IN_I_STS, + .size = 2, + .trigger_addr = RR_ADC_USB_IN_I_TRIGGER, + }, { + .label = "usbin_v", + .lsb = RR_ADC_USB_IN_V_LSB, + .status = RR_ADC_USB_IN_V_STS, + .size = 2, + .trigger_addr = RR_ADC_USB_IN_V_TRIGGER, + .trigger_mask = BIT(7), + }, { + .label = "dcin_i", + .lsb = RR_ADC_DC_IN_I_LSB, + .status = RR_ADC_DC_IN_I_STS, + .size = 2, + .trigger_addr = RR_ADC_DC_IN_I_TRIGGER, + }, { + .label = "dcin_v", + .lsb = RR_ADC_DC_IN_V_LSB, + .status = RR_ADC_DC_IN_V_STS, + .size = 2, + .trigger_addr = RR_ADC_DC_IN_V_TRIGGER, + }, { + .label = "pmi8998_die", + .lsb = RR_ADC_PMI_DIE_TEMP_LSB, + .status = RR_ADC_PMI_DIE_TEMP_STS, + .size = 2, + .trigger_addr = RR_ADC_PMI_DIE_TEMP_TRIGGER, + .trigger_mask = RR_ADC_TRIGGER_EVERY_CYCLE, + }, { + .label = "chg", + .lsb = RR_ADC_CHARGER_TEMP_LSB, + .status = RR_ADC_CHARGER_TEMP_STS, + .size = 2, + .trigger_addr = RR_ADC_CHARGER_TEMP_TRIGGER, + }, { + .label = "gpio", + .lsb = RR_ADC_GPIO_LSB, + .status = RR_ADC_GPIO_STS, + .size = 2, + .trigger_addr = RR_ADC_GPIO_TRIGGER, + }, +}; + +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX] = { + { + .type = IIO_RESISTANCE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = RR_ADC_BATT_ID, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = RR_ADC_BATT_THERM, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .address = RR_ADC_SKIN_TEMP, + .channel = 1, + .indexed = 1, + }, { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_USBIN_I, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_USBIN_V, + .channel = 0, + .indexed = 1, + }, { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_DCIN_I, + .channel = 1, + .indexed = 1, + }, { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_DCIN_V, + .channel = 1, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + .address = RR_ADC_DIE_TEMP, + .channel = 2, + .indexed = 1, + }, { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_CHG_TEMP, + .channel = 3, + .indexed = 1, + }, { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .address = RR_ADC_GPIO, + .channel = 2, + .indexed = 1, + }, +}; + +static int rradc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct rradc_chip *chip; + int ret, i, batt_id_delay; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + chip->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->regmap) { + dev_err(dev, "Couldn't get parent's regmap\n"); + return -EINVAL; + } + + chip->dev = dev; + mutex_init(&chip->conversion_lock); + + ret = device_property_read_u32(dev, "reg", &chip->base); + if (ret < 0) { + dev_err(chip->dev, "Couldn't find reg address, ret = %d\n", + ret); + return ret; + } + + batt_id_delay = -1; + ret = device_property_read_u32(dev, "qcom,batt-id-delay-ms", + &batt_id_delay); + if (!ret) { + for (i = 0; i < RRADC_BATT_ID_DELAY_MAX; i++) { + if (batt_id_delay == batt_id_delays[i]) + break; + } + if (i == RRADC_BATT_ID_DELAY_MAX) + batt_id_delay = -1; + } + + if (batt_id_delay >= 0) { + batt_id_delay = FIELD_PREP(BATT_ID_SETTLE_MASK, batt_id_delay); + ret = regmap_update_bits(chip->regmap, + chip->base + RR_ADC_BATT_ID_CFG, + batt_id_delay, batt_id_delay); + if (ret < 0) { + dev_err(chip->dev, + "BATT_ID settling time config failed:%d\n", + ret); + } + } + + /* Get the PMIC revision, we need it to handle some varying coefficients */ + chip->pmic = qcom_pmic_get(chip->dev); + if (IS_ERR(chip->pmic)) { + dev_err(chip->dev, "Unable to get reference to PMIC device\n"); + return PTR_ERR(chip->pmic); + } + + switch (chip->pmic->subtype) { + case PMI8998_SUBTYPE: + indio_dev->name = "pmi8998-rradc"; + break; + case PM660_SUBTYPE: + indio_dev->name = "pm660-rradc"; + break; + default: + indio_dev->name = DRIVER_NAME; + break; + } + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &rradc_info; + indio_dev->channels = rradc_iio_chans; + indio_dev->num_channels = ARRAY_SIZE(rradc_iio_chans); + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id rradc_match_table[] = { + { .compatible = "qcom,pm660-rradc" }, + { .compatible = "qcom,pmi8998-rradc" }, + {} +}; +MODULE_DEVICE_TABLE(of, rradc_match_table); + +static struct platform_driver rradc_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = rradc_match_table, + }, + .probe = rradc_probe, +}; +module_platform_driver(rradc_driver); + +MODULE_DESCRIPTION("QCOM SPMI PMIC RR ADC driver"); +MODULE_AUTHOR("Caleb Connolly <caleb.connolly@linaro.org>"); +MODULE_LICENSE("GPL v2");