Message ID | 20220328094838.14093-2-quic_mpubbise@quicinc.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Kalle Valo |
Headers | show |
Series | add support for WCN6750 | expand |
On Mon, 28 Mar 2022 15:18:27 +0530, Manikanta Pubbisetty wrote: > WCN6750 is the WLAN chip on Qualcomm Snapdragon SoC SC7280; > Though being a PCIe based solution, it is not attached to > the APSS processor (Application Processor SubSystem), it is > instead attached to another tiny processor called WPSS Q6 > processor (Wireless Processor SubSystem) on the SC7280 MSM, > where the WLAN firmware runs, and it is the WLAN firmware > running on the Q6 processor which enumerates WCN6750, as a > result APPS processor would never know such a device being > present in the system and would not detect the WCN6750 > hardware unless and otherwise WCN6750 is registered as a > platform device. This is the reason behind adding WCN6750 > WLAN node in the device tree. > > Add WCN6750 wireless driver support, its based on ath11k driver. > > Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> > --- > .../bindings/net/wireless/qcom,ath11k.yaml | 361 ++++++++++++------ > 1 file changed, 252 insertions(+), 109 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On 3/30/2022 5:07 AM, Rob Herring wrote: > On Mon, 28 Mar 2022 15:18:27 +0530, Manikanta Pubbisetty wrote: >> WCN6750 is the WLAN chip on Qualcomm Snapdragon SoC SC7280; >> Though being a PCIe based solution, it is not attached to >> the APSS processor (Application Processor SubSystem), it is >> instead attached to another tiny processor called WPSS Q6 >> processor (Wireless Processor SubSystem) on the SC7280 MSM, >> where the WLAN firmware runs, and it is the WLAN firmware >> running on the Q6 processor which enumerates WCN6750, as a >> result APPS processor would never know such a device being >> present in the system and would not detect the WCN6750 >> hardware unless and otherwise WCN6750 is registered as a >> platform device. This is the reason behind adding WCN6750 >> WLAN node in the device tree. >> >> Add WCN6750 wireless driver support, its based on ath11k driver. >> >> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> >> --- >> .../bindings/net/wireless/qcom,ath11k.yaml | 361 ++++++++++++------ >> 1 file changed, 252 insertions(+), 109 deletions(-) >> > > Reviewed-by: Rob Herring <robh@kernel.org> Thanks for the review Rob!! Manikanta
On Mon, Mar 28, 2022 at 03:18:27PM +0530, Manikanta Pubbisetty wrote: > WCN6750 is the WLAN chip on Qualcomm Snapdragon SoC SC7280; > Though being a PCIe based solution, it is not attached to > the APSS processor (Application Processor SubSystem), it is > instead attached to another tiny processor called WPSS Q6 > processor (Wireless Processor SubSystem) on the SC7280 MSM, > where the WLAN firmware runs, and it is the WLAN firmware > running on the Q6 processor which enumerates WCN6750, as a > result APPS processor would never know such a device being > present in the system and would not detect the WCN6750 > hardware unless and otherwise WCN6750 is registered as a > platform device. This is the reason behind adding WCN6750 > WLAN node in the device tree. > > Add WCN6750 wireless driver support, its based on ath11k driver. > > Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../bindings/net/wireless/qcom,ath11k.yaml | 361 ++++++++++++------ > 1 file changed, 252 insertions(+), 109 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > index cdf7b873b419..67104d69fd72 100644 > --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml > @@ -20,120 +20,17 @@ properties: > enum: > - qcom,ipq8074-wifi > - qcom,ipq6018-wifi > + - qcom,wcn6750-wifi > > reg: > maxItems: 1 > > interrupts: > - items: > - - description: misc-pulse1 interrupt events > - - description: misc-latch interrupt events > - - description: sw exception interrupt events > - - description: watchdog interrupt events > - - description: interrupt event for ring CE0 > - - description: interrupt event for ring CE1 > - - description: interrupt event for ring CE2 > - - description: interrupt event for ring CE3 > - - description: interrupt event for ring CE4 > - - description: interrupt event for ring CE5 > - - description: interrupt event for ring CE6 > - - description: interrupt event for ring CE7 > - - description: interrupt event for ring CE8 > - - description: interrupt event for ring CE9 > - - description: interrupt event for ring CE10 > - - description: interrupt event for ring CE11 > - - description: interrupt event for ring host2wbm-desc-feed > - - description: interrupt event for ring host2reo-re-injection > - - description: interrupt event for ring host2reo-command > - - description: interrupt event for ring host2rxdma-monitor-ring3 > - - description: interrupt event for ring host2rxdma-monitor-ring2 > - - description: interrupt event for ring host2rxdma-monitor-ring1 > - - description: interrupt event for ring reo2ost-exception > - - description: interrupt event for ring wbm2host-rx-release > - - description: interrupt event for ring reo2host-status > - - description: interrupt event for ring reo2host-destination-ring4 > - - description: interrupt event for ring reo2host-destination-ring3 > - - description: interrupt event for ring reo2host-destination-ring2 > - - description: interrupt event for ring reo2host-destination-ring1 > - - description: interrupt event for ring rxdma2host-monitor-destination-mac3 > - - description: interrupt event for ring rxdma2host-monitor-destination-mac2 > - - description: interrupt event for ring rxdma2host-monitor-destination-mac1 > - - description: interrupt event for ring ppdu-end-interrupts-mac3 > - - description: interrupt event for ring ppdu-end-interrupts-mac2 > - - description: interrupt event for ring ppdu-end-interrupts-mac1 > - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 > - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 > - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 > - - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 > - - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 > - - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 > - - description: interrupt event for ring rxdma2host-destination-ring-mac3 > - - description: interrupt event for ring rxdma2host-destination-ring-mac2 > - - description: interrupt event for ring rxdma2host-destination-ring-mac1 > - - description: interrupt event for ring host2tcl-input-ring4 > - - description: interrupt event for ring host2tcl-input-ring3 > - - description: interrupt event for ring host2tcl-input-ring2 > - - description: interrupt event for ring host2tcl-input-ring1 > - - description: interrupt event for ring wbm2host-tx-completions-ring3 > - - description: interrupt event for ring wbm2host-tx-completions-ring2 > - - description: interrupt event for ring wbm2host-tx-completions-ring1 > - - description: interrupt event for ring tcl2host-status-ring > - > + minItems: 32 > + maxItems: 52 > > interrupt-names: > - items: > - - const: misc-pulse1 > - - const: misc-latch > - - const: sw-exception > - - const: watchdog > - - const: ce0 > - - const: ce1 > - - const: ce2 > - - const: ce3 > - - const: ce4 > - - const: ce5 > - - const: ce6 > - - const: ce7 > - - const: ce8 > - - const: ce9 > - - const: ce10 > - - const: ce11 > - - const: host2wbm-desc-feed > - - const: host2reo-re-injection > - - const: host2reo-command > - - const: host2rxdma-monitor-ring3 > - - const: host2rxdma-monitor-ring2 > - - const: host2rxdma-monitor-ring1 > - - const: reo2ost-exception > - - const: wbm2host-rx-release > - - const: reo2host-status > - - const: reo2host-destination-ring4 > - - const: reo2host-destination-ring3 > - - const: reo2host-destination-ring2 > - - const: reo2host-destination-ring1 > - - const: rxdma2host-monitor-destination-mac3 > - - const: rxdma2host-monitor-destination-mac2 > - - const: rxdma2host-monitor-destination-mac1 > - - const: ppdu-end-interrupts-mac3 > - - const: ppdu-end-interrupts-mac2 > - - const: ppdu-end-interrupts-mac1 > - - const: rxdma2host-monitor-status-ring-mac3 > - - const: rxdma2host-monitor-status-ring-mac2 > - - const: rxdma2host-monitor-status-ring-mac1 > - - const: host2rxdma-host-buf-ring-mac3 > - - const: host2rxdma-host-buf-ring-mac2 > - - const: host2rxdma-host-buf-ring-mac1 > - - const: rxdma2host-destination-ring-mac3 > - - const: rxdma2host-destination-ring-mac2 > - - const: rxdma2host-destination-ring-mac1 > - - const: host2tcl-input-ring4 > - - const: host2tcl-input-ring3 > - - const: host2tcl-input-ring2 > - - const: host2tcl-input-ring1 > - - const: wbm2host-tx-completions-ring3 > - - const: wbm2host-tx-completions-ring2 > - - const: wbm2host-tx-completions-ring1 > - - const: tcl2host-status-ring > + maxItems: 52 > > qcom,rproc: > $ref: /schemas/types.yaml#/definitions/phandle > @@ -151,20 +48,205 @@ properties: > board-2.bin for designs with colliding bus and device specific ids > > memory-region: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > description: > phandle to a node describing reserved memory (System RAM memory) > used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) > > + iommus: > + minItems: 1 > + maxItems: 2 > + > + wifi-firmware: > + type: object > + description: | > + WCN6750 wifi node can contain one optional firmware subnode. > + Firmware subnode is needed when the platform does not have Tustzone. s/Tustzone/Trustzone/ > + required: > + - iommus > + > required: > - compatible > - reg > - interrupts > - - interrupt-names > - qcom,rproc > > additionalProperties: false > > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,ipq8074-wifi > + - qcom,ipq6018-wifi > + then: > + properties: > + interrupts: > + items: > + - description: misc-pulse1 interrupt events > + - description: misc-latch interrupt events > + - description: sw exception interrupt events > + - description: watchdog interrupt events > + - description: interrupt event for ring CE0 > + - description: interrupt event for ring CE1 > + - description: interrupt event for ring CE2 > + - description: interrupt event for ring CE3 > + - description: interrupt event for ring CE4 > + - description: interrupt event for ring CE5 > + - description: interrupt event for ring CE6 > + - description: interrupt event for ring CE7 > + - description: interrupt event for ring CE8 > + - description: interrupt event for ring CE9 > + - description: interrupt event for ring CE10 > + - description: interrupt event for ring CE11 > + - description: interrupt event for ring host2wbm-desc-feed > + - description: interrupt event for ring host2reo-re-injection > + - description: interrupt event for ring host2reo-command > + - description: interrupt event for ring host2rxdma-monitor-ring3 > + - description: interrupt event for ring host2rxdma-monitor-ring2 > + - description: interrupt event for ring host2rxdma-monitor-ring1 > + - description: interrupt event for ring reo2ost-exception > + - description: interrupt event for ring wbm2host-rx-release > + - description: interrupt event for ring reo2host-status > + - description: interrupt event for ring reo2host-destination-ring4 > + - description: interrupt event for ring reo2host-destination-ring3 > + - description: interrupt event for ring reo2host-destination-ring2 > + - description: interrupt event for ring reo2host-destination-ring1 > + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 > + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 > + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 > + - description: interrupt event for ring ppdu-end-interrupts-mac3 > + - description: interrupt event for ring ppdu-end-interrupts-mac2 > + - description: interrupt event for ring ppdu-end-interrupts-mac1 > + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 > + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 > + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 > + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 > + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 > + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 > + - description: interrupt event for ring rxdma2host-destination-ring-mac3 > + - description: interrupt event for ring rxdma2host-destination-ring-mac2 > + - description: interrupt event for ring rxdma2host-destination-ring-mac1 > + - description: interrupt event for ring host2tcl-input-ring4 > + - description: interrupt event for ring host2tcl-input-ring3 > + - description: interrupt event for ring host2tcl-input-ring2 > + - description: interrupt event for ring host2tcl-input-ring1 > + - description: interrupt event for ring wbm2host-tx-completions-ring3 > + - description: interrupt event for ring wbm2host-tx-completions-ring2 > + - description: interrupt event for ring wbm2host-tx-completions-ring1 > + - description: interrupt event for ring tcl2host-status-ring > + interrupt-names: > + items: > + - const: misc-pulse1 > + - const: misc-latch > + - const: sw-exception > + - const: watchdog > + - const: ce0 > + - const: ce1 > + - const: ce2 > + - const: ce3 > + - const: ce4 > + - const: ce5 > + - const: ce6 > + - const: ce7 > + - const: ce8 > + - const: ce9 > + - const: ce10 > + - const: ce11 > + - const: host2wbm-desc-feed > + - const: host2reo-re-injection > + - const: host2reo-command > + - const: host2rxdma-monitor-ring3 > + - const: host2rxdma-monitor-ring2 > + - const: host2rxdma-monitor-ring1 > + - const: reo2ost-exception > + - const: wbm2host-rx-release > + - const: reo2host-status > + - const: reo2host-destination-ring4 > + - const: reo2host-destination-ring3 > + - const: reo2host-destination-ring2 > + - const: reo2host-destination-ring1 > + - const: rxdma2host-monitor-destination-mac3 > + - const: rxdma2host-monitor-destination-mac2 > + - const: rxdma2host-monitor-destination-mac1 > + - const: ppdu-end-interrupts-mac3 > + - const: ppdu-end-interrupts-mac2 > + - const: ppdu-end-interrupts-mac1 > + - const: rxdma2host-monitor-status-ring-mac3 > + - const: rxdma2host-monitor-status-ring-mac2 > + - const: rxdma2host-monitor-status-ring-mac1 > + - const: host2rxdma-host-buf-ring-mac3 > + - const: host2rxdma-host-buf-ring-mac2 > + - const: host2rxdma-host-buf-ring-mac1 > + - const: rxdma2host-destination-ring-mac3 > + - const: rxdma2host-destination-ring-mac2 > + - const: rxdma2host-destination-ring-mac1 > + - const: host2tcl-input-ring4 > + - const: host2tcl-input-ring3 > + - const: host2tcl-input-ring2 > + - const: host2tcl-input-ring1 > + - const: wbm2host-tx-completions-ring3 > + - const: wbm2host-tx-completions-ring2 > + - const: wbm2host-tx-completions-ring1 > + - const: tcl2host-status-ring > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,ipq8074-wifi > + - qcom,ipq6018-wifi > + then: > + required: > + - interrupt-names > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,wcn6750-wifi > + then: > + properties: > + interrupts: > + items: > + - description: interrupt event for ring CE1 > + - description: interrupt event for ring CE2 > + - description: interrupt event for ring CE3 > + - description: interrupt event for ring CE4 > + - description: interrupt event for ring CE5 > + - description: interrupt event for ring CE6 > + - description: interrupt event for ring CE7 > + - description: interrupt event for ring CE8 > + - description: interrupt event for ring CE9 > + - description: interrupt event for ring CE10 > + - description: interrupt event for ring DP1 > + - description: interrupt event for ring DP2 > + - description: interrupt event for ring DP3 > + - description: interrupt event for ring DP4 > + - description: interrupt event for ring DP5 > + - description: interrupt event for ring DP6 > + - description: interrupt event for ring DP7 > + - description: interrupt event for ring DP8 > + - description: interrupt event for ring DP9 > + - description: interrupt event for ring DP10 > + - description: interrupt event for ring DP11 > + - description: interrupt event for ring DP12 > + - description: interrupt event for ring DP13 > + - description: interrupt event for ring DP14 > + - description: interrupt event for ring DP15 > + - description: interrupt event for ring DP16 > + - description: interrupt event for ring DP17 > + - description: interrupt event for ring DP18 > + - description: interrupt event for ring DP19 > + - description: interrupt event for ring DP20 > + - description: interrupt event for ring DP21 > + - description: interrupt event for ring DP22 > + > examples: > - | > > @@ -309,3 +391,64 @@ examples: > }; > }; > }; > + > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + > + wlan_ce_mem: wlan_ce_mem@4cd000 { Node names should use dashes ('-') as separators, so the node name should be 'wlan-ce-mem'. Actually reserved memory nodes for sc7280 are all named memory@addr, the binding should follow this convention, so 'memory@4cd000'. > + no-map; > + reg = <0x0 0x4cd000 0x0 0x1000>; Pad the address here to 8 digits > + }; > + > + wlan_fw_mem: wlan_fw_mem@80c00000 { Same as above: memory@80c00000 > + no-map; > + reg = <0x0 0x80c00000 0x0 0xc00000>; > + }; > + }; > + > + wifi: wifi@17a10040 { > + compatible = "qcom,wcn6750-wifi"; > + reg = <0x17A10040 0x0>; Use lowercase for hex digits > + iommus = <&apps_smmu 0x1C00 0x1>; Ditto > + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, > + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; > + qcom,rproc = <&remoteproc_wpss>; > + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; > + wifi-firmware { > + iommus = <&apps_smmu 0x1C02 0x1>; Use lowercase for hex digits > + }; > + };
On 4/5/2022 12:41 AM, Matthias Kaehlcke wrote: > On Mon, Mar 28, 2022 at 03:18:27PM +0530, Manikanta Pubbisetty wrote: >> WCN6750 is the WLAN chip on Qualcomm Snapdragon SoC SC7280; >> Though being a PCIe based solution, it is not attached to >> the APSS processor (Application Processor SubSystem), it is >> instead attached to another tiny processor called WPSS Q6 >> processor (Wireless Processor SubSystem) on the SC7280 MSM, >> where the WLAN firmware runs, and it is the WLAN firmware >> running on the Q6 processor which enumerates WCN6750, as a >> result APPS processor would never know such a device being >> present in the system and would not detect the WCN6750 >> hardware unless and otherwise WCN6750 is registered as a >> platform device. This is the reason behind adding WCN6750 >> WLAN node in the device tree. >> >> Add WCN6750 wireless driver support, its based on ath11k driver. >> >> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> >> Reviewed-by: Rob Herring <robh@kernel.org> >> --- >> .../bindings/net/wireless/qcom,ath11k.yaml | 361 ++++++++++++------ >> 1 file changed, 252 insertions(+), 109 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> index cdf7b873b419..67104d69fd72 100644 >> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml >> @@ -20,120 +20,17 @@ properties: >> enum: >> - qcom,ipq8074-wifi >> - qcom,ipq6018-wifi >> + - qcom,wcn6750-wifi >> >> reg: >> maxItems: 1 >> >> interrupts: >> - items: >> - - description: misc-pulse1 interrupt events >> - - description: misc-latch interrupt events >> - - description: sw exception interrupt events >> - - description: watchdog interrupt events >> - - description: interrupt event for ring CE0 >> - - description: interrupt event for ring CE1 >> - - description: interrupt event for ring CE2 >> - - description: interrupt event for ring CE3 >> - - description: interrupt event for ring CE4 >> - - description: interrupt event for ring CE5 >> - - description: interrupt event for ring CE6 >> - - description: interrupt event for ring CE7 >> - - description: interrupt event for ring CE8 >> - - description: interrupt event for ring CE9 >> - - description: interrupt event for ring CE10 >> - - description: interrupt event for ring CE11 >> - - description: interrupt event for ring host2wbm-desc-feed >> - - description: interrupt event for ring host2reo-re-injection >> - - description: interrupt event for ring host2reo-command >> - - description: interrupt event for ring host2rxdma-monitor-ring3 >> - - description: interrupt event for ring host2rxdma-monitor-ring2 >> - - description: interrupt event for ring host2rxdma-monitor-ring1 >> - - description: interrupt event for ring reo2ost-exception >> - - description: interrupt event for ring wbm2host-rx-release >> - - description: interrupt event for ring reo2host-status >> - - description: interrupt event for ring reo2host-destination-ring4 >> - - description: interrupt event for ring reo2host-destination-ring3 >> - - description: interrupt event for ring reo2host-destination-ring2 >> - - description: interrupt event for ring reo2host-destination-ring1 >> - - description: interrupt event for ring rxdma2host-monitor-destination-mac3 >> - - description: interrupt event for ring rxdma2host-monitor-destination-mac2 >> - - description: interrupt event for ring rxdma2host-monitor-destination-mac1 >> - - description: interrupt event for ring ppdu-end-interrupts-mac3 >> - - description: interrupt event for ring ppdu-end-interrupts-mac2 >> - - description: interrupt event for ring ppdu-end-interrupts-mac1 >> - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 >> - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 >> - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 >> - - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 >> - - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 >> - - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 >> - - description: interrupt event for ring rxdma2host-destination-ring-mac3 >> - - description: interrupt event for ring rxdma2host-destination-ring-mac2 >> - - description: interrupt event for ring rxdma2host-destination-ring-mac1 >> - - description: interrupt event for ring host2tcl-input-ring4 >> - - description: interrupt event for ring host2tcl-input-ring3 >> - - description: interrupt event for ring host2tcl-input-ring2 >> - - description: interrupt event for ring host2tcl-input-ring1 >> - - description: interrupt event for ring wbm2host-tx-completions-ring3 >> - - description: interrupt event for ring wbm2host-tx-completions-ring2 >> - - description: interrupt event for ring wbm2host-tx-completions-ring1 >> - - description: interrupt event for ring tcl2host-status-ring >> - >> + minItems: 32 >> + maxItems: 52 >> >> interrupt-names: >> - items: >> - - const: misc-pulse1 >> - - const: misc-latch >> - - const: sw-exception >> - - const: watchdog >> - - const: ce0 >> - - const: ce1 >> - - const: ce2 >> - - const: ce3 >> - - const: ce4 >> - - const: ce5 >> - - const: ce6 >> - - const: ce7 >> - - const: ce8 >> - - const: ce9 >> - - const: ce10 >> - - const: ce11 >> - - const: host2wbm-desc-feed >> - - const: host2reo-re-injection >> - - const: host2reo-command >> - - const: host2rxdma-monitor-ring3 >> - - const: host2rxdma-monitor-ring2 >> - - const: host2rxdma-monitor-ring1 >> - - const: reo2ost-exception >> - - const: wbm2host-rx-release >> - - const: reo2host-status >> - - const: reo2host-destination-ring4 >> - - const: reo2host-destination-ring3 >> - - const: reo2host-destination-ring2 >> - - const: reo2host-destination-ring1 >> - - const: rxdma2host-monitor-destination-mac3 >> - - const: rxdma2host-monitor-destination-mac2 >> - - const: rxdma2host-monitor-destination-mac1 >> - - const: ppdu-end-interrupts-mac3 >> - - const: ppdu-end-interrupts-mac2 >> - - const: ppdu-end-interrupts-mac1 >> - - const: rxdma2host-monitor-status-ring-mac3 >> - - const: rxdma2host-monitor-status-ring-mac2 >> - - const: rxdma2host-monitor-status-ring-mac1 >> - - const: host2rxdma-host-buf-ring-mac3 >> - - const: host2rxdma-host-buf-ring-mac2 >> - - const: host2rxdma-host-buf-ring-mac1 >> - - const: rxdma2host-destination-ring-mac3 >> - - const: rxdma2host-destination-ring-mac2 >> - - const: rxdma2host-destination-ring-mac1 >> - - const: host2tcl-input-ring4 >> - - const: host2tcl-input-ring3 >> - - const: host2tcl-input-ring2 >> - - const: host2tcl-input-ring1 >> - - const: wbm2host-tx-completions-ring3 >> - - const: wbm2host-tx-completions-ring2 >> - - const: wbm2host-tx-completions-ring1 >> - - const: tcl2host-status-ring >> + maxItems: 52 >> >> qcom,rproc: >> $ref: /schemas/types.yaml#/definitions/phandle >> @@ -151,20 +48,205 @@ properties: >> board-2.bin for designs with colliding bus and device specific ids >> >> memory-region: >> - maxItems: 1 >> + minItems: 1 >> + maxItems: 2 >> description: >> phandle to a node describing reserved memory (System RAM memory) >> used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) >> >> + iommus: >> + minItems: 1 >> + maxItems: 2 >> + >> + wifi-firmware: >> + type: object >> + description: | >> + WCN6750 wifi node can contain one optional firmware subnode. >> + Firmware subnode is needed when the platform does not have Tustzone. > > s/Tustzone/Trustzone/ Sure > >> + required: >> + - iommus >> + >> required: >> - compatible >> - reg >> - interrupts >> - - interrupt-names >> - qcom,rproc >> >> additionalProperties: false >> >> +allOf: >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,ipq8074-wifi >> + - qcom,ipq6018-wifi >> + then: >> + properties: >> + interrupts: >> + items: >> + - description: misc-pulse1 interrupt events >> + - description: misc-latch interrupt events >> + - description: sw exception interrupt events >> + - description: watchdog interrupt events >> + - description: interrupt event for ring CE0 >> + - description: interrupt event for ring CE1 >> + - description: interrupt event for ring CE2 >> + - description: interrupt event for ring CE3 >> + - description: interrupt event for ring CE4 >> + - description: interrupt event for ring CE5 >> + - description: interrupt event for ring CE6 >> + - description: interrupt event for ring CE7 >> + - description: interrupt event for ring CE8 >> + - description: interrupt event for ring CE9 >> + - description: interrupt event for ring CE10 >> + - description: interrupt event for ring CE11 >> + - description: interrupt event for ring host2wbm-desc-feed >> + - description: interrupt event for ring host2reo-re-injection >> + - description: interrupt event for ring host2reo-command >> + - description: interrupt event for ring host2rxdma-monitor-ring3 >> + - description: interrupt event for ring host2rxdma-monitor-ring2 >> + - description: interrupt event for ring host2rxdma-monitor-ring1 >> + - description: interrupt event for ring reo2ost-exception >> + - description: interrupt event for ring wbm2host-rx-release >> + - description: interrupt event for ring reo2host-status >> + - description: interrupt event for ring reo2host-destination-ring4 >> + - description: interrupt event for ring reo2host-destination-ring3 >> + - description: interrupt event for ring reo2host-destination-ring2 >> + - description: interrupt event for ring reo2host-destination-ring1 >> + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 >> + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 >> + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 >> + - description: interrupt event for ring ppdu-end-interrupts-mac3 >> + - description: interrupt event for ring ppdu-end-interrupts-mac2 >> + - description: interrupt event for ring ppdu-end-interrupts-mac1 >> + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 >> + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 >> + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 >> + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 >> + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 >> + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 >> + - description: interrupt event for ring rxdma2host-destination-ring-mac3 >> + - description: interrupt event for ring rxdma2host-destination-ring-mac2 >> + - description: interrupt event for ring rxdma2host-destination-ring-mac1 >> + - description: interrupt event for ring host2tcl-input-ring4 >> + - description: interrupt event for ring host2tcl-input-ring3 >> + - description: interrupt event for ring host2tcl-input-ring2 >> + - description: interrupt event for ring host2tcl-input-ring1 >> + - description: interrupt event for ring wbm2host-tx-completions-ring3 >> + - description: interrupt event for ring wbm2host-tx-completions-ring2 >> + - description: interrupt event for ring wbm2host-tx-completions-ring1 >> + - description: interrupt event for ring tcl2host-status-ring >> + interrupt-names: >> + items: >> + - const: misc-pulse1 >> + - const: misc-latch >> + - const: sw-exception >> + - const: watchdog >> + - const: ce0 >> + - const: ce1 >> + - const: ce2 >> + - const: ce3 >> + - const: ce4 >> + - const: ce5 >> + - const: ce6 >> + - const: ce7 >> + - const: ce8 >> + - const: ce9 >> + - const: ce10 >> + - const: ce11 >> + - const: host2wbm-desc-feed >> + - const: host2reo-re-injection >> + - const: host2reo-command >> + - const: host2rxdma-monitor-ring3 >> + - const: host2rxdma-monitor-ring2 >> + - const: host2rxdma-monitor-ring1 >> + - const: reo2ost-exception >> + - const: wbm2host-rx-release >> + - const: reo2host-status >> + - const: reo2host-destination-ring4 >> + - const: reo2host-destination-ring3 >> + - const: reo2host-destination-ring2 >> + - const: reo2host-destination-ring1 >> + - const: rxdma2host-monitor-destination-mac3 >> + - const: rxdma2host-monitor-destination-mac2 >> + - const: rxdma2host-monitor-destination-mac1 >> + - const: ppdu-end-interrupts-mac3 >> + - const: ppdu-end-interrupts-mac2 >> + - const: ppdu-end-interrupts-mac1 >> + - const: rxdma2host-monitor-status-ring-mac3 >> + - const: rxdma2host-monitor-status-ring-mac2 >> + - const: rxdma2host-monitor-status-ring-mac1 >> + - const: host2rxdma-host-buf-ring-mac3 >> + - const: host2rxdma-host-buf-ring-mac2 >> + - const: host2rxdma-host-buf-ring-mac1 >> + - const: rxdma2host-destination-ring-mac3 >> + - const: rxdma2host-destination-ring-mac2 >> + - const: rxdma2host-destination-ring-mac1 >> + - const: host2tcl-input-ring4 >> + - const: host2tcl-input-ring3 >> + - const: host2tcl-input-ring2 >> + - const: host2tcl-input-ring1 >> + - const: wbm2host-tx-completions-ring3 >> + - const: wbm2host-tx-completions-ring2 >> + - const: wbm2host-tx-completions-ring1 >> + - const: tcl2host-status-ring >> + >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,ipq8074-wifi >> + - qcom,ipq6018-wifi >> + then: >> + required: >> + - interrupt-names >> + >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,wcn6750-wifi >> + then: >> + properties: >> + interrupts: >> + items: >> + - description: interrupt event for ring CE1 >> + - description: interrupt event for ring CE2 >> + - description: interrupt event for ring CE3 >> + - description: interrupt event for ring CE4 >> + - description: interrupt event for ring CE5 >> + - description: interrupt event for ring CE6 >> + - description: interrupt event for ring CE7 >> + - description: interrupt event for ring CE8 >> + - description: interrupt event for ring CE9 >> + - description: interrupt event for ring CE10 >> + - description: interrupt event for ring DP1 >> + - description: interrupt event for ring DP2 >> + - description: interrupt event for ring DP3 >> + - description: interrupt event for ring DP4 >> + - description: interrupt event for ring DP5 >> + - description: interrupt event for ring DP6 >> + - description: interrupt event for ring DP7 >> + - description: interrupt event for ring DP8 >> + - description: interrupt event for ring DP9 >> + - description: interrupt event for ring DP10 >> + - description: interrupt event for ring DP11 >> + - description: interrupt event for ring DP12 >> + - description: interrupt event for ring DP13 >> + - description: interrupt event for ring DP14 >> + - description: interrupt event for ring DP15 >> + - description: interrupt event for ring DP16 >> + - description: interrupt event for ring DP17 >> + - description: interrupt event for ring DP18 >> + - description: interrupt event for ring DP19 >> + - description: interrupt event for ring DP20 >> + - description: interrupt event for ring DP21 >> + - description: interrupt event for ring DP22 >> + >> examples: >> - | >> >> @@ -309,3 +391,64 @@ examples: >> }; >> }; >> }; >> + >> + - | >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> + reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + wlan_ce_mem: wlan_ce_mem@4cd000 { > > Node names should use dashes ('-') as separators, so the node name should > be 'wlan-ce-mem'. > > Actually reserved memory nodes for sc7280 are all named memory@addr, the > binding should follow this convention, so 'memory@4cd000'. > >> + no-map; >> + reg = <0x0 0x4cd000 0x0 0x1000>; > > Pad the address here to 8 digits > >> + }; >> + >> + wlan_fw_mem: wlan_fw_mem@80c00000 { > > Same as above: memory@80c00000 > >> + no-map; >> + reg = <0x0 0x80c00000 0x0 0xc00000>; >> + }; >> + }; >> + >> + wifi: wifi@17a10040 { >> + compatible = "qcom,wcn6750-wifi"; >> + reg = <0x17A10040 0x0>; > > Use lowercase for hex digits > >> + iommus = <&apps_smmu 0x1C00 0x1>; > > Ditto > >> + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, >> + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; >> + qcom,rproc = <&remoteproc_wpss>; >> + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; >> + wifi-firmware { >> + iommus = <&apps_smmu 0x1C02 0x1>; > > Use lowercase for hex digits > >> + }; >> + }; I'll address all of these. Thanks, Manikanta
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index cdf7b873b419..67104d69fd72 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -20,120 +20,17 @@ properties: enum: - qcom,ipq8074-wifi - qcom,ipq6018-wifi + - qcom,wcn6750-wifi reg: maxItems: 1 interrupts: - items: - - description: misc-pulse1 interrupt events - - description: misc-latch interrupt events - - description: sw exception interrupt events - - description: watchdog interrupt events - - description: interrupt event for ring CE0 - - description: interrupt event for ring CE1 - - description: interrupt event for ring CE2 - - description: interrupt event for ring CE3 - - description: interrupt event for ring CE4 - - description: interrupt event for ring CE5 - - description: interrupt event for ring CE6 - - description: interrupt event for ring CE7 - - description: interrupt event for ring CE8 - - description: interrupt event for ring CE9 - - description: interrupt event for ring CE10 - - description: interrupt event for ring CE11 - - description: interrupt event for ring host2wbm-desc-feed - - description: interrupt event for ring host2reo-re-injection - - description: interrupt event for ring host2reo-command - - description: interrupt event for ring host2rxdma-monitor-ring3 - - description: interrupt event for ring host2rxdma-monitor-ring2 - - description: interrupt event for ring host2rxdma-monitor-ring1 - - description: interrupt event for ring reo2ost-exception - - description: interrupt event for ring wbm2host-rx-release - - description: interrupt event for ring reo2host-status - - description: interrupt event for ring reo2host-destination-ring4 - - description: interrupt event for ring reo2host-destination-ring3 - - description: interrupt event for ring reo2host-destination-ring2 - - description: interrupt event for ring reo2host-destination-ring1 - - description: interrupt event for ring rxdma2host-monitor-destination-mac3 - - description: interrupt event for ring rxdma2host-monitor-destination-mac2 - - description: interrupt event for ring rxdma2host-monitor-destination-mac1 - - description: interrupt event for ring ppdu-end-interrupts-mac3 - - description: interrupt event for ring ppdu-end-interrupts-mac2 - - description: interrupt event for ring ppdu-end-interrupts-mac1 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 - - description: interrupt event for ring rxdma2host-destination-ring-mac3 - - description: interrupt event for ring rxdma2host-destination-ring-mac2 - - description: interrupt event for ring rxdma2host-destination-ring-mac1 - - description: interrupt event for ring host2tcl-input-ring4 - - description: interrupt event for ring host2tcl-input-ring3 - - description: interrupt event for ring host2tcl-input-ring2 - - description: interrupt event for ring host2tcl-input-ring1 - - description: interrupt event for ring wbm2host-tx-completions-ring3 - - description: interrupt event for ring wbm2host-tx-completions-ring2 - - description: interrupt event for ring wbm2host-tx-completions-ring1 - - description: interrupt event for ring tcl2host-status-ring - + minItems: 32 + maxItems: 52 interrupt-names: - items: - - const: misc-pulse1 - - const: misc-latch - - const: sw-exception - - const: watchdog - - const: ce0 - - const: ce1 - - const: ce2 - - const: ce3 - - const: ce4 - - const: ce5 - - const: ce6 - - const: ce7 - - const: ce8 - - const: ce9 - - const: ce10 - - const: ce11 - - const: host2wbm-desc-feed - - const: host2reo-re-injection - - const: host2reo-command - - const: host2rxdma-monitor-ring3 - - const: host2rxdma-monitor-ring2 - - const: host2rxdma-monitor-ring1 - - const: reo2ost-exception - - const: wbm2host-rx-release - - const: reo2host-status - - const: reo2host-destination-ring4 - - const: reo2host-destination-ring3 - - const: reo2host-destination-ring2 - - const: reo2host-destination-ring1 - - const: rxdma2host-monitor-destination-mac3 - - const: rxdma2host-monitor-destination-mac2 - - const: rxdma2host-monitor-destination-mac1 - - const: ppdu-end-interrupts-mac3 - - const: ppdu-end-interrupts-mac2 - - const: ppdu-end-interrupts-mac1 - - const: rxdma2host-monitor-status-ring-mac3 - - const: rxdma2host-monitor-status-ring-mac2 - - const: rxdma2host-monitor-status-ring-mac1 - - const: host2rxdma-host-buf-ring-mac3 - - const: host2rxdma-host-buf-ring-mac2 - - const: host2rxdma-host-buf-ring-mac1 - - const: rxdma2host-destination-ring-mac3 - - const: rxdma2host-destination-ring-mac2 - - const: rxdma2host-destination-ring-mac1 - - const: host2tcl-input-ring4 - - const: host2tcl-input-ring3 - - const: host2tcl-input-ring2 - - const: host2tcl-input-ring1 - - const: wbm2host-tx-completions-ring3 - - const: wbm2host-tx-completions-ring2 - - const: wbm2host-tx-completions-ring1 - - const: tcl2host-status-ring + maxItems: 52 qcom,rproc: $ref: /schemas/types.yaml#/definitions/phandle @@ -151,20 +48,205 @@ properties: board-2.bin for designs with colliding bus and device specific ids memory-region: - maxItems: 1 + minItems: 1 + maxItems: 2 description: phandle to a node describing reserved memory (System RAM memory) used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) + iommus: + minItems: 1 + maxItems: 2 + + wifi-firmware: + type: object + description: | + WCN6750 wifi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Tustzone. + required: + - iommus + required: - compatible - reg - interrupts - - interrupt-names - qcom,rproc additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + properties: + interrupts: + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + interrupt-names: + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-wifi + then: + properties: + interrupts: + items: + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring DP1 + - description: interrupt event for ring DP2 + - description: interrupt event for ring DP3 + - description: interrupt event for ring DP4 + - description: interrupt event for ring DP5 + - description: interrupt event for ring DP6 + - description: interrupt event for ring DP7 + - description: interrupt event for ring DP8 + - description: interrupt event for ring DP9 + - description: interrupt event for ring DP10 + - description: interrupt event for ring DP11 + - description: interrupt event for ring DP12 + - description: interrupt event for ring DP13 + - description: interrupt event for ring DP14 + - description: interrupt event for ring DP15 + - description: interrupt event for ring DP16 + - description: interrupt event for ring DP17 + - description: interrupt event for ring DP18 + - description: interrupt event for ring DP19 + - description: interrupt event for ring DP20 + - description: interrupt event for ring DP21 + - description: interrupt event for ring DP22 + examples: - | @@ -309,3 +391,64 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + wlan_ce_mem: wlan_ce_mem@4cd000 { + no-map; + reg = <0x0 0x4cd000 0x0 0x1000>; + }; + + wlan_fw_mem: wlan_fw_mem@80c00000 { + no-map; + reg = <0x0 0x80c00000 0x0 0xc00000>; + }; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0x17A10040 0x0>; + iommus = <&apps_smmu 0x1C00 0x1>; + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + wifi-firmware { + iommus = <&apps_smmu 0x1C02 0x1>; + }; + };
WCN6750 is the WLAN chip on Qualcomm Snapdragon SoC SC7280; Though being a PCIe based solution, it is not attached to the APSS processor (Application Processor SubSystem), it is instead attached to another tiny processor called WPSS Q6 processor (Wireless Processor SubSystem) on the SC7280 MSM, where the WLAN firmware runs, and it is the WLAN firmware running on the Q6 processor which enumerates WCN6750, as a result APPS processor would never know such a device being present in the system and would not detect the WCN6750 hardware unless and otherwise WCN6750 is registered as a platform device. This is the reason behind adding WCN6750 WLAN node in the device tree. Add WCN6750 wireless driver support, its based on ath11k driver. Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- .../bindings/net/wireless/qcom,ath11k.yaml | 361 ++++++++++++------ 1 file changed, 252 insertions(+), 109 deletions(-)