Message ID | 1648710182-31899-1-git-send-email-quic_c_sbhanu@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | [V3] mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC | expand |
On Thu 31 Mar 00:03 PDT 2022, Shaik Sajida Bhanu wrote: > Reset GCC_SDCC_BCR register before every fresh initilazation. This will > reset whole SDHC-msm controller, clears the previous power control > states and avoids, software reset timeout issues as below. > > [ 5.458061][ T262] mmc1: Reset 0x1 never completed. > [ 5.462454][ T262] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== > [ 5.469065][ T262] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00007202 > [ 5.475688][ T262] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 > [ 5.482315][ T262] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 > [ 5.488927][ T262] mmc1: sdhci: Present: 0x01f800f0 | Host ctl: 0x00000000 > [ 5.495539][ T262] mmc1: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 > [ 5.502162][ T262] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000003 > [ 5.508768][ T262] mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 > [ 5.515381][ T262] mmc1: sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 > [ 5.521996][ T262] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 > [ 5.528607][ T262] mmc1: sdhci: Caps: 0x362dc8b2 | Caps_1: 0x0000808f > [ 5.535227][ T262] mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 > [ 5.541841][ T262] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 > [ 5.548454][ T262] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 > [ 5.555079][ T262] mmc1: sdhci: Host ctl2: 0x00000000 > [ 5.559651][ T262] mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP----------- > [ 5.566621][ T262] mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x6000642c | DLL cfg2: 0x0020a000 > [ 5.575465][ T262] mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00010800 | DDR cfg: 0x80040873 > [ 5.584658][ T262] mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88218a8 Vndr func3: 0x02626040 > > Fixes: 0eb0d9f4de34 ("mmc: sdhci-msm: Initial support for Qualcomm chipsets") > Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> > --- > > Changes since V2: > - Dropped new line after fixes tag as suggested by Bjorn > Andersson. > - Passed device structure instead of passing platform_device > structure as a argument for sdhci_msm_gcc_reset() as suggested > by Bjorn Andersson. > - Replaced dev_err() with dev_err_probe() as suggested by Bjorn > Andersson. Thanks, looks much better. Still some things I would like to see improved below. > Changes since V1: > - Added fixes tag as suggested by Ulf Hansson. > - Replaced devm_reset_control_get() with > devm_reset_control_get_optional_exclusive() as suggested by > Ulf Hansson. > --- > drivers/mmc/host/sdhci-msm.c | 39 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index 50c71e0..e15e789 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -17,6 +17,7 @@ > #include <linux/regulator/consumer.h> > #include <linux/interconnect.h> > #include <linux/pinctrl/consumer.h> > +#include <linux/reset.h> > > #include "sdhci-pltfm.h" > #include "cqhci.h" > @@ -284,6 +285,7 @@ struct sdhci_msm_host { > bool uses_tassadar_dll; > u32 dll_config; > u32 ddr_config; > + struct reset_control *core_reset; > bool vqmmc_enabled; > }; > > @@ -2482,6 +2484,39 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev, > of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config); > } > > +static int sdhci_msm_gcc_reset(struct device *dev, struct sdhci_host *host) > +{ > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); > + int ret = 0; First use of this variable is an assignment, so no need to initialize it here. > + > + msm_host->core_reset = devm_reset_control_get_optional_exclusive(dev, "core_reset"); reset-names will only be used to identify resets and hence there's no reason to include "_reset" in the identifier. If this is the only reset for the controller, there's actually no reason for identifying it, you can omit reset-names from the binding and just pass NULL here (to get the first resets = <>). > + if (IS_ERR(msm_host->core_reset)) > + return dev_err_probe(dev, PTR_ERR(msm_host->core_reset), > + "unable to acquire core_reset\n"); > + > + if (!msm_host->core_reset) > + return 0; > + > + ret = reset_control_assert(msm_host->core_reset); > + if (ret) > + return dev_err_probe(dev, ret, "core_reset assert failed\n"); > + > + /* > + * The hardware requirement for delay between assert/deassert > + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to > + * ~125us (4/32768). To be on the safe side add 200us delay. > + */ > + usleep_range(200, 210); > + > + ret = reset_control_deassert(msm_host->core_reset); > + if (ret) > + return dev_err_probe(dev, ret, "core_reset deassert failed\n"); > + > + usleep_range(200, 210); > + sdhci_msm_gcc_reset() is only called once during probe(), so there's no reason to carry the reset_control pointer in struct sdhci_msm_host. Make it a local variable and use reset_control_get_optional_exclusive() and reset_control_put() the reset here before returning. Regards, Bjorn > + return 0; > +} > > static int sdhci_msm_probe(struct platform_device *pdev) > { > @@ -2529,6 +2564,10 @@ static int sdhci_msm_probe(struct platform_device *pdev) > > msm_host->saved_tuning_phase = INVALID_TUNING_PHASE; > > + ret = sdhci_msm_gcc_reset(&pdev->dev, host); > + if (ret) > + goto pltfm_free; > + > /* Setup SDCC bus voter clock. */ > msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); > if (!IS_ERR(msm_host->bus_clk)) { > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
On 4/1/2022 12:12 AM, Bjorn Andersson wrote: > On Thu 31 Mar 00:03 PDT 2022, Shaik Sajida Bhanu wrote: > >> Reset GCC_SDCC_BCR register before every fresh initilazation. This will >> reset whole SDHC-msm controller, clears the previous power control >> states and avoids, software reset timeout issues as below. >> >> [ 5.458061][ T262] mmc1: Reset 0x1 never completed. >> [ 5.462454][ T262] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== >> [ 5.469065][ T262] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00007202 >> [ 5.475688][ T262] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 >> [ 5.482315][ T262] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 >> [ 5.488927][ T262] mmc1: sdhci: Present: 0x01f800f0 | Host ctl: 0x00000000 >> [ 5.495539][ T262] mmc1: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 >> [ 5.502162][ T262] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000003 >> [ 5.508768][ T262] mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 >> [ 5.515381][ T262] mmc1: sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 >> [ 5.521996][ T262] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 >> [ 5.528607][ T262] mmc1: sdhci: Caps: 0x362dc8b2 | Caps_1: 0x0000808f >> [ 5.535227][ T262] mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 >> [ 5.541841][ T262] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 >> [ 5.548454][ T262] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 >> [ 5.555079][ T262] mmc1: sdhci: Host ctl2: 0x00000000 >> [ 5.559651][ T262] mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP----------- >> [ 5.566621][ T262] mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x6000642c | DLL cfg2: 0x0020a000 >> [ 5.575465][ T262] mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00010800 | DDR cfg: 0x80040873 >> [ 5.584658][ T262] mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88218a8 Vndr func3: 0x02626040 >> >> Fixes: 0eb0d9f4de34 ("mmc: sdhci-msm: Initial support for Qualcomm chipsets") >> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> >> --- >> >> Changes since V2: >> - Dropped new line after fixes tag as suggested by Bjorn >> Andersson. >> - Passed device structure instead of passing platform_device >> structure as a argument for sdhci_msm_gcc_reset() as suggested >> by Bjorn Andersson. >> - Replaced dev_err() with dev_err_probe() as suggested by Bjorn >> Andersson. > Thanks, looks much better. Still some things I would like to see > improved below. Sure >> Changes since V1: >> - Added fixes tag as suggested by Ulf Hansson. >> - Replaced devm_reset_control_get() with >> devm_reset_control_get_optional_exclusive() as suggested by >> Ulf Hansson. >> --- >> drivers/mmc/host/sdhci-msm.c | 39 +++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 39 insertions(+) >> >> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c >> index 50c71e0..e15e789 100644 >> --- a/drivers/mmc/host/sdhci-msm.c >> +++ b/drivers/mmc/host/sdhci-msm.c >> @@ -17,6 +17,7 @@ >> #include <linux/regulator/consumer.h> >> #include <linux/interconnect.h> >> #include <linux/pinctrl/consumer.h> >> +#include <linux/reset.h> >> >> #include "sdhci-pltfm.h" >> #include "cqhci.h" >> @@ -284,6 +285,7 @@ struct sdhci_msm_host { >> bool uses_tassadar_dll; >> u32 dll_config; >> u32 ddr_config; >> + struct reset_control *core_reset; >> bool vqmmc_enabled; >> }; >> >> @@ -2482,6 +2484,39 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev, >> of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config); >> } >> >> +static int sdhci_msm_gcc_reset(struct device *dev, struct sdhci_host *host) >> +{ >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); >> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); >> + int ret = 0; > First use of this variable is an assignment, so no need to initialize it > here. Sure >> + >> + msm_host->core_reset = devm_reset_control_get_optional_exclusive(dev, "core_reset"); > reset-names will only be used to identify resets and hence there's no > reason to include "_reset" in the identifier. > > If this is the only reset for the controller, there's actually no reason > for identifying it, you can omit reset-names from the binding and just > pass NULL here (to get the first resets = <>). ok Sure >> + if (IS_ERR(msm_host->core_reset)) >> + return dev_err_probe(dev, PTR_ERR(msm_host->core_reset), >> + "unable to acquire core_reset\n"); >> + >> + if (!msm_host->core_reset) >> + return 0; >> + >> + ret = reset_control_assert(msm_host->core_reset); >> + if (ret) >> + return dev_err_probe(dev, ret, "core_reset assert failed\n"); >> + >> + /* >> + * The hardware requirement for delay between assert/deassert >> + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to >> + * ~125us (4/32768). To be on the safe side add 200us delay. >> + */ >> + usleep_range(200, 210); >> + >> + ret = reset_control_deassert(msm_host->core_reset); >> + if (ret) >> + return dev_err_probe(dev, ret, "core_reset deassert failed\n"); >> + >> + usleep_range(200, 210); >> + > sdhci_msm_gcc_reset() is only called once during probe(), so there's no > reason to carry the reset_control pointer in struct sdhci_msm_host. Make > it a local variable and use reset_control_get_optional_exclusive() and > reset_control_put() the reset here before returning. > > Regards, > Bjorn Sure Thanks for the review. >> + return 0; >> +} >> >> static int sdhci_msm_probe(struct platform_device *pdev) >> { >> @@ -2529,6 +2564,10 @@ static int sdhci_msm_probe(struct platform_device *pdev) >> >> msm_host->saved_tuning_phase = INVALID_TUNING_PHASE; >> >> + ret = sdhci_msm_gcc_reset(&pdev->dev, host); >> + if (ret) >> + goto pltfm_free; >> + >> /* Setup SDCC bus voter clock. */ >> msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); >> if (!IS_ERR(msm_host->bus_clk)) { >> -- >> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member >> of Code Aurora Forum, hosted by The Linux Foundation >>
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 50c71e0..e15e789 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/interconnect.h> #include <linux/pinctrl/consumer.h> +#include <linux/reset.h> #include "sdhci-pltfm.h" #include "cqhci.h" @@ -284,6 +285,7 @@ struct sdhci_msm_host { bool uses_tassadar_dll; u32 dll_config; u32 ddr_config; + struct reset_control *core_reset; bool vqmmc_enabled; }; @@ -2482,6 +2484,39 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev, of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config); } +static int sdhci_msm_gcc_reset(struct device *dev, struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + int ret = 0; + + msm_host->core_reset = devm_reset_control_get_optional_exclusive(dev, "core_reset"); + if (IS_ERR(msm_host->core_reset)) + return dev_err_probe(dev, PTR_ERR(msm_host->core_reset), + "unable to acquire core_reset\n"); + + if (!msm_host->core_reset) + return 0; + + ret = reset_control_assert(msm_host->core_reset); + if (ret) + return dev_err_probe(dev, ret, "core_reset assert failed\n"); + + /* + * The hardware requirement for delay between assert/deassert + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to + * ~125us (4/32768). To be on the safe side add 200us delay. + */ + usleep_range(200, 210); + + ret = reset_control_deassert(msm_host->core_reset); + if (ret) + return dev_err_probe(dev, ret, "core_reset deassert failed\n"); + + usleep_range(200, 210); + + return 0; +} static int sdhci_msm_probe(struct platform_device *pdev) { @@ -2529,6 +2564,10 @@ static int sdhci_msm_probe(struct platform_device *pdev) msm_host->saved_tuning_phase = INVALID_TUNING_PHASE; + ret = sdhci_msm_gcc_reset(&pdev->dev, host); + if (ret) + goto pltfm_free; + /* Setup SDCC bus voter clock. */ msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); if (!IS_ERR(msm_host->bus_clk)) {
Reset GCC_SDCC_BCR register before every fresh initilazation. This will reset whole SDHC-msm controller, clears the previous power control states and avoids, software reset timeout issues as below. [ 5.458061][ T262] mmc1: Reset 0x1 never completed. [ 5.462454][ T262] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 5.469065][ T262] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00007202 [ 5.475688][ T262] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 [ 5.482315][ T262] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 [ 5.488927][ T262] mmc1: sdhci: Present: 0x01f800f0 | Host ctl: 0x00000000 [ 5.495539][ T262] mmc1: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 5.502162][ T262] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000003 [ 5.508768][ T262] mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 [ 5.515381][ T262] mmc1: sdhci: Int enab: 0x00000000 | Sig enab: 0x00000000 [ 5.521996][ T262] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000 [ 5.528607][ T262] mmc1: sdhci: Caps: 0x362dc8b2 | Caps_1: 0x0000808f [ 5.535227][ T262] mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 5.541841][ T262] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 [ 5.548454][ T262] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 [ 5.555079][ T262] mmc1: sdhci: Host ctl2: 0x00000000 [ 5.559651][ T262] mmc1: sdhci_msm: ----------- VENDOR REGISTER DUMP----------- [ 5.566621][ T262] mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg: 0x6000642c | DLL cfg2: 0x0020a000 [ 5.575465][ T262] mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl: 0x00010800 | DDR cfg: 0x80040873 [ 5.584658][ T262] mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 : 0xf88218a8 Vndr func3: 0x02626040 Fixes: 0eb0d9f4de34 ("mmc: sdhci-msm: Initial support for Qualcomm chipsets") Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> --- Changes since V2: - Dropped new line after fixes tag as suggested by Bjorn Andersson. - Passed device structure instead of passing platform_device structure as a argument for sdhci_msm_gcc_reset() as suggested by Bjorn Andersson. - Replaced dev_err() with dev_err_probe() as suggested by Bjorn Andersson. Changes since V1: - Added fixes tag as suggested by Ulf Hansson. - Replaced devm_reset_control_get() with devm_reset_control_get_optional_exclusive() as suggested by Ulf Hansson. --- drivers/mmc/host/sdhci-msm.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)