| Message ID | 20220408080045.6497-2-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | mmc: improve API to make clear {h|s}w_reset is for cards | expand |
Wolfram Sang <wsa+renesas@sang-engineering.com> writes: > To make it unambiguous that mmc_hw_reset() is for cards and not for > controllers, we make the function argument mmc_card instead of mmc_host. > Also, all users are converted. > > Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > > Ulf prefers one cross-subsystem patch to have all users converted. So, > we are looking for ACKs from the maintainers of the wireless drivers. > Thank you! > > Changes since RFC: > * don't rename the function but only change the argument type > * remove fallback and convert all users in one go > * remove comment as suggested by Ulf > > drivers/mmc/core/block.c | 2 +- > drivers/mmc/core/core.c | 5 +++-- > drivers/mmc/core/mmc_test.c | 3 +-- > drivers/net/wireless/ath/ath10k/sdio.c | 2 +- > drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +- > drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +- > drivers/net/wireless/ti/wlcore/sdio.c | 2 +- For wireless: Acked-by: Kalle Valo <kvalo@kernel.org>
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 9c009e820de4..b35e7a95798b 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -995,7 +995,7 @@ static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host, return -EEXIST; md->reset_done |= type; - err = mmc_hw_reset(host); + err = mmc_hw_reset(host->card); /* Ensure we switch back to the correct partition */ if (err) { struct mmc_blk_data *main_md = diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 61abae221623..6f2561469a8f 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1998,7 +1998,7 @@ static void mmc_hw_reset_for_init(struct mmc_host *host) /** * mmc_hw_reset - reset the card in hardware - * @host: MMC host to which the card is attached + * @card: card to be reset * * Hard reset the card. This function is only for upper layers, like the * block layer or card drivers. You cannot use it in host drivers (struct @@ -2006,8 +2006,9 @@ static void mmc_hw_reset_for_init(struct mmc_host *host) * * Return: 0 on success, -errno on failure */ -int mmc_hw_reset(struct mmc_host *host) +int mmc_hw_reset(struct mmc_card *card) { + struct mmc_host *host = card->host; int ret; ret = host->bus_ops->hw_reset(host); diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c index e6a2fd2c6d5c..8d9bceeff986 100644 --- a/drivers/mmc/core/mmc_test.c +++ b/drivers/mmc/core/mmc_test.c @@ -2325,10 +2325,9 @@ static int mmc_test_profile_sglen_r_nonblock_perf(struct mmc_test_card *test) static int mmc_test_reset(struct mmc_test_card *test) { struct mmc_card *card = test->card; - struct mmc_host *host = card->host; int err; - err = mmc_hw_reset(host); + err = mmc_hw_reset(card); if (!err) { /* * Reset will re-enable the card's command queue, but tests diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c index 63e1c2d783c5..73693c66cef1 100644 --- a/drivers/net/wireless/ath/ath10k/sdio.c +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -1633,7 +1633,7 @@ static void ath10k_sdio_hif_power_down(struct ath10k *ar) return; } - ret = mmc_hw_reset(ar_sdio->func->card->host); + ret = mmc_hw_reset(ar_sdio->func->card); if (ret) ath10k_warn(ar, "unable to reset sdio: %d\n", ret); diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index ba3c159111d3..55285cad527f 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -4165,7 +4165,7 @@ static int brcmf_sdio_bus_reset(struct device *dev) /* reset the adapter */ sdio_claim_host(sdiodev->func1); - mmc_hw_reset(sdiodev->func1->card->host); + mmc_hw_reset(sdiodev->func1->card); sdio_release_host(sdiodev->func1); brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_DOWN); diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c index bde9e4bbfffe..4f3238d2a171 100644 --- a/drivers/net/wireless/marvell/mwifiex/sdio.c +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c @@ -2639,7 +2639,7 @@ static void mwifiex_sdio_card_reset_work(struct mwifiex_adapter *adapter) /* Run a HW reset of the SDIO interface. */ sdio_claim_host(func); - ret = mmc_hw_reset(func->card->host); + ret = mmc_hw_reset(func->card); sdio_release_host(func); switch (ret) { diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 72fc41ac83c0..9140b0163474 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -146,7 +146,7 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) * To guarantee that the SDIO card is power cycled, as required to make * the FW programming to succeed, let's do a brute force HW reset. */ - mmc_hw_reset(card->host); + mmc_hw_reset(card); sdio_enable_func(func); sdio_release_host(func); diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 71101d1ec825..de5c64bbdb72 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -175,7 +175,7 @@ void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq); int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries); -int mmc_hw_reset(struct mmc_host *host); +int mmc_hw_reset(struct mmc_card *card); int mmc_sw_reset(struct mmc_host *host); void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card);
To make it unambiguous that mmc_hw_reset() is for cards and not for controllers, we make the function argument mmc_card instead of mmc_host. Also, all users are converted. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- Ulf prefers one cross-subsystem patch to have all users converted. So, we are looking for ACKs from the maintainers of the wireless drivers. Thank you! Changes since RFC: * don't rename the function but only change the argument type * remove fallback and convert all users in one go * remove comment as suggested by Ulf drivers/mmc/core/block.c | 2 +- drivers/mmc/core/core.c | 5 +++-- drivers/mmc/core/mmc_test.c | 3 +-- drivers/net/wireless/ath/ath10k/sdio.c | 2 +- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +- drivers/net/wireless/marvell/mwifiex/sdio.c | 2 +- drivers/net/wireless/ti/wlcore/sdio.c | 2 +- include/linux/mmc/core.h | 2 +- 8 files changed, 10 insertions(+), 10 deletions(-)