| Message ID | 20220330113329.3402438-1-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ls1028a: sl28: use ocelot-8021q tagging by default | expand |
On Wed, Mar 30, 2022 at 01:33:29PM +0200, Michael Walle wrote: > Enable the ocelot-8021q tagger by default which supports ethernet flow > control. > > The new default is set in the common board dtsi. The actual switch > node is enabled on a per board variant basis. Because of this we > set the new tagger default for both internal ports and a particular > variant is free to choose among the two port. > > Signed-off-by: Michael Walle <michael@walle.cc> > --- Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> > .../arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts > index 7ef47b80e343..68d11a9c67f3 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts > @@ -328,6 +328,14 @@ &lpuart1 { > status = "okay"; > }; > > +&mscc_felix_port4 { > + dsa-tag-protocol = "ocelot-8021q"; > +}; > + > +&mscc_felix_port5 { > + dsa-tag-protocol = "ocelot-8021q"; > +}; > + > &usb0 { > status = "okay"; > }; > -- > 2.30.2 >
On Wed, Mar 30, 2022 at 01:33:29PM +0200, Michael Walle wrote: > Enable the ocelot-8021q tagger by default which supports ethernet flow > control. > > The new default is set in the common board dtsi. The actual switch > node is enabled on a per board variant basis. Because of this we > set the new tagger default for both internal ports and a particular > variant is free to choose among the two port. > > Signed-off-by: Michael Walle <michael@walle.cc> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 7ef47b80e343..68d11a9c67f3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -328,6 +328,14 @@ &lpuart1 { status = "okay"; }; +&mscc_felix_port4 { + dsa-tag-protocol = "ocelot-8021q"; +}; + +&mscc_felix_port5 { + dsa-tag-protocol = "ocelot-8021q"; +}; + &usb0 { status = "okay"; };
Enable the ocelot-8021q tagger by default which supports ethernet flow control. The new default is set in the common board dtsi. The actual switch node is enabled on a per board variant basis. Because of this we set the new tagger default for both internal ports and a particular variant is free to choose among the two port. Signed-off-by: Michael Walle <michael@walle.cc> --- .../arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 8 ++++++++ 1 file changed, 8 insertions(+)