diff mbox series

[v9,5/9] dmaengine: dw: dmamux: Introduce RZN1 DMA router support

Message ID 20220412102138.45975-6-miquel.raynal@bootlin.com (mailing list archive)
State Not Applicable, archived
Headers show
Series RZN1 DMA support | expand

Commit Message

Miquel Raynal April 12, 2022, 10:21 a.m. UTC
The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
dmamux register located in the system control area which can take up to
32 requests (16 per DMA controller). Each DMA channel can be wired to
two different peripherals.

We need two additional information from the 'dmas' property: the channel
(bit in the dmamux register) that must be accessed and the value of the
mux for this channel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/dma/dw/Kconfig       |   9 ++
 drivers/dma/dw/Makefile      |   2 +
 drivers/dma/dw/rzn1-dmamux.c | 163 +++++++++++++++++++++++++++++++++++
 3 files changed, 174 insertions(+)
 create mode 100644 drivers/dma/dw/rzn1-dmamux.c

Comments

Andy Shevchenko April 12, 2022, 11:06 a.m. UTC | #1
On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:
> The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
> dmamux register located in the system control area which can take up to
> 32 requests (16 per DMA controller). Each DMA channel can be wired to
> two different peripherals.
> 
> We need two additional information from the 'dmas' property: the channel
> (bit in the dmamux register) that must be accessed and the value of the
> mux for this channel.

...

Some headers are absent, e.g.: types.h, bitops.h.

> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/slab.h>

...

> +	mutex_lock(&dmamux->lock);
> +	clear_bit(BIT(map->req_idx), dmamux->used_chans);

Why do you need atomic bit operation here _and_ mutex?

> +	mutex_unlock(&dmamux->lock);

Ditto for the rest similar cases.
Andy Shevchenko April 12, 2022, 11:08 a.m. UTC | #2
On Tue, Apr 12, 2022 at 02:06:31PM +0300, Andy Shevchenko wrote:
> On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:

...

> > +	clear_bit(BIT(map->req_idx), dmamux->used_chans);

On top of the previously asked, are you sure the use of BIT() is correct here?
Miquel Raynal April 12, 2022, 3:17 p.m. UTC | #3
Hi Andy,

andriy.shevchenko@linux.intel.com wrote on Tue, 12 Apr 2022 14:08:33
+0300:

> On Tue, Apr 12, 2022 at 02:06:31PM +0300, Andy Shevchenko wrote:
> > On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:  
> 
> ...
> 
> > > +	clear_bit(BIT(map->req_idx), dmamux->used_chans);  
> 
> On top of the previously asked, are you sure the use of BIT() is correct here?

Looks like I have been tricked by the doc...

	* DOC: bitmap bitops
	*  set_bit(bit, addr)                  *addr |= bit
	*  clear_bit(bit, addr)                *addr &= ~bit
Miquel Raynal April 12, 2022, 3:39 p.m. UTC | #4
Hi Andy,

andriy.shevchenko@linux.intel.com wrote on Tue, 12 Apr 2022 14:06:30
+0300:

> On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:
> > The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
> > dmamux register located in the system control area which can take up to
> > 32 requests (16 per DMA controller). Each DMA channel can be wired to
> > two different peripherals.
> > 
> > We need two additional information from the 'dmas' property: the channel
> > (bit in the dmamux register) that must be accessed and the value of the
> > mux for this channel.  
> 
> ...
> 
> Some headers are absent, e.g.: types.h, bitops.h.
> 
> > +#include <linux/of_device.h>
> > +#include <linux/of_dma.h>
> > +#include <linux/slab.h>  
> 
> ...
> 
> > +	mutex_lock(&dmamux->lock);
> > +	clear_bit(BIT(map->req_idx), dmamux->used_chans);  
> 
> Why do you need atomic bit operation here _and_ mutex?
> 
> > +	mutex_unlock(&dmamux->lock);  
> 
> Ditto for the rest similar cases.

We no longer need the lock however I re-ordered things like they were
before because I need to add a check on the bitmap when setting the bit
and this must be done before touching the dmamux registers.

Thanks,
Miquèl
diff mbox series

Patch

diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index db25f9b7778c..a9828ddd6d06 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -16,6 +16,15 @@  config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller. This
 	  can be integrated in chips such as the Intel Cherrytrail.
 
+config RZN1_DMAMUX
+	tristate "Renesas RZ/N1 DMAMUX driver"
+	depends on DW_DMAC
+	depends on ARCH_RZN1 || COMPILE_TEST
+	help
+	  Support the Renesas RZ/N1 DMAMUX which is located in front of
+	  the Synopsys DesignWare AHB DMA controller located on Renesas
+	  SoCs.
+
 config DW_DMAC_PCI
 	tristate "Synopsys DesignWare AHB DMA PCI driver"
 	depends on PCI
diff --git a/drivers/dma/dw/Makefile b/drivers/dma/dw/Makefile
index a6f358ad8591..e1796015f213 100644
--- a/drivers/dma/dw/Makefile
+++ b/drivers/dma/dw/Makefile
@@ -9,3 +9,5 @@  dw_dmac-$(CONFIG_OF)		+= of.o
 
 obj-$(CONFIG_DW_DMAC_PCI)	+= dw_dmac_pci.o
 dw_dmac_pci-y			:= pci.o
+
+obj-$(CONFIG_RZN1_DMAMUX)	+= rzn1-dmamux.o
diff --git a/drivers/dma/dw/rzn1-dmamux.c b/drivers/dma/dw/rzn1-dmamux.c
new file mode 100644
index 000000000000..4d6f2f6d98d0
--- /dev/null
+++ b/drivers/dma/dw/rzn1-dmamux.c
@@ -0,0 +1,163 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Schneider-Electric
+ * Author: Miquel Raynal <miquel.raynal@bootlin.com
+ * Based on TI crossbar driver written by Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/slab.h>
+#include <linux/soc/renesas/r9a06g032-sysctrl.h>
+
+#define RNZ1_DMAMUX_NCELLS 6
+#define RZN1_DMAMUX_LINES 64
+#define RZN1_DMAMUX_MAX_LINES 16
+
+struct rzn1_dmamux_data {
+	struct dma_router dmarouter;
+	unsigned long *used_chans;
+	struct mutex lock;
+};
+
+struct rzn1_dmamux_map {
+	unsigned int req_idx;
+};
+
+static void rzn1_dmamux_free(struct device *dev, void *route_data)
+{
+	struct rzn1_dmamux_data *dmamux = dev_get_drvdata(dev);
+	struct rzn1_dmamux_map *map = route_data;
+
+	dev_dbg(dev, "Unmapping DMAMUX request %u\n", map->req_idx);
+
+	mutex_lock(&dmamux->lock);
+	clear_bit(BIT(map->req_idx), dmamux->used_chans);
+	mutex_unlock(&dmamux->lock);
+
+	kfree(map);
+}
+
+static void *rzn1_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+					struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct rzn1_dmamux_data *dmamux = platform_get_drvdata(pdev);
+	struct rzn1_dmamux_map *map;
+	unsigned int dmac_idx, chan, val;
+	u32 mask;
+	int ret;
+
+	if (dma_spec->args_count != RNZ1_DMAMUX_NCELLS)
+		return ERR_PTR(-EINVAL);
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return ERR_PTR(-ENOMEM);
+
+	chan = dma_spec->args[0];
+	map->req_idx = dma_spec->args[4];
+	val = dma_spec->args[5];
+	dma_spec->args_count -= 2;
+
+	if (chan >= RZN1_DMAMUX_MAX_LINES) {
+		dev_err(&pdev->dev, "Invalid DMA request line: %u\n", chan);
+		ret = -EINVAL;
+		goto free_map;
+	}
+
+	if (map->req_idx >= RZN1_DMAMUX_LINES ||
+	    (map->req_idx % RZN1_DMAMUX_MAX_LINES) != chan) {
+		dev_err(&pdev->dev, "Invalid MUX request line: %u\n", map->req_idx);
+		ret = -EINVAL;
+		goto free_map;
+	}
+
+	dmac_idx = map->req_idx >= RZN1_DMAMUX_MAX_LINES ? 1 : 0;
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", dmac_idx);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "Can't get DMA master\n");
+		ret = -EINVAL;
+		goto free_map;
+	}
+
+	dev_dbg(&pdev->dev, "Mapping DMAMUX request %u to DMAC%u request %u\n",
+		map->req_idx, dmac_idx, chan);
+
+	mask = BIT(map->req_idx);
+
+	mutex_lock(&dmamux->lock);
+	ret = r9a06g032_sysctrl_set_dmamux(mask, val ? mask : 0);
+	if (ret)
+		goto unlock;
+
+	set_bit(mask, dmamux->used_chans);
+	mutex_unlock(&dmamux->lock);
+
+	return map;
+
+unlock:
+	mutex_unlock(&dmamux->lock);
+free_map:
+	kfree(map);
+
+	return ERR_PTR(ret);
+}
+
+static const struct of_device_id rzn1_dmac_match[] = {
+	{ .compatible = "renesas,rzn1-dma" },
+	{}
+};
+
+static int rzn1_dmamux_probe(struct platform_device *pdev)
+{
+	struct device_node *mux_node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dmac_node;
+	struct rzn1_dmamux_data *dmamux;
+
+	dmamux = devm_kzalloc(&pdev->dev, sizeof(*dmamux), GFP_KERNEL);
+	if (!dmamux)
+		return -ENOMEM;
+
+	dmamux->used_chans = devm_bitmap_zalloc(&pdev->dev, 2 * RZN1_DMAMUX_MAX_LINES,
+						GFP_KERNEL);
+	if (!dmamux->used_chans)
+		return -ENOMEM;
+
+	mutex_init(&dmamux->lock);
+
+	dmac_node = of_parse_phandle(mux_node, "dma-masters", 0);
+	if (!dmac_node)
+		return dev_err_probe(&pdev->dev, -ENODEV, "Can't get DMA master node\n");
+
+	match = of_match_node(rzn1_dmac_match, dmac_node);
+	of_node_put(dmac_node);
+	if (!match)
+		return dev_err_probe(&pdev->dev, -EINVAL, "DMA master is not supported\n");
+
+	dmamux->dmarouter.dev = &pdev->dev;
+	dmamux->dmarouter.route_free = rzn1_dmamux_free;
+
+	platform_set_drvdata(pdev, dmamux);
+
+	return of_dma_router_register(mux_node, rzn1_dmamux_route_allocate,
+				      &dmamux->dmarouter);
+}
+
+static const struct of_device_id rzn1_dmamux_match[] = {
+	{ .compatible = "renesas,rzn1-dmamux" },
+	{}
+};
+
+static struct platform_driver rzn1_dmamux_driver = {
+	.driver = {
+		.name = "renesas,rzn1-dmamux",
+		.of_match_table = rzn1_dmamux_match,
+	},
+	.probe	= rzn1_dmamux_probe,
+};
+module_platform_driver(rzn1_dmamux_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com");
+MODULE_DESCRIPTION("Renesas RZ/N1 DMAMUX driver");