| Message ID | 1649695021-19132-3-git-send-email-quic_vpolimer@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add inline rotation support for sc7280 | expand |
On 11/04/2022 19:37, Vinod Polimera wrote: > - Some DPU versions support inline rot90. It is supported only for > limited amount of UBWC formats. > - There are two versions of inline rotators, v1 (present on sm8250 and > sm7250) and v2 (sc7280). These versions differ in the list of supported > formats and in the scaler possibilities. > > Co-developed-by: Kalyan Thota <quic_kalyant@quicinc.com> > Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> > Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 43 ++++++++- > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 16 +++ > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 129 ++++++++++++++++++++----- > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 2 + > 4 files changed, 161 insertions(+), 29 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > index a4fe77c..85b539d 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c > @@ -35,6 +35,9 @@ > BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ > BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_EXCL_RECT)) > > +#define VIG_SC7280_MASK \ > + (VIG_SC7180_MASK | BIT(DPU_SSPP_INLINE_ROTATION)) > + > #define DMA_SDM845_MASK \ > (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ > BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ > @@ -203,6 +206,11 @@ static const uint32_t plane_formats_yuv[] = { > DRM_FORMAT_YVU420, > }; > > +static const u32 rotation_v2_formats[] = { > + DRM_FORMAT_NV12, > + /* TODO add formats after validation */ > +}; > + > /************************************************************* > * DPU sub blocks config > *************************************************************/ > @@ -642,7 +650,6 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = { > *************************************************************/ > > /* SSPP common configuration */ > - > #define _VIG_SBLK(num, sdma_pri, qseed_ver) \ > { \ > .maxdwnscale = MAX_DOWNSCALE_RATIO, \ > @@ -660,6 +667,27 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = { > .num_formats = ARRAY_SIZE(plane_formats_yuv), \ > .virt_format_list = plane_formats, \ > .virt_num_formats = ARRAY_SIZE(plane_formats), \ > + .rotation_cfg = NULL, \ > + } > + > +#define _VIG_SBLK_ROT(num, sdma_pri, qseed_ver, rot_cfg) \ > + { \ > + .maxdwnscale = MAX_DOWNSCALE_RATIO, \ > + .maxupscale = MAX_UPSCALE_RATIO, \ > + .smart_dma_priority = sdma_pri, \ > + .src_blk = {.name = STRCAT("sspp_src_", num), \ > + .id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \ > + .scaler_blk = {.name = STRCAT("sspp_scaler", num), \ > + .id = qseed_ver, \ > + .base = 0xa00, .len = 0xa0,}, \ > + .csc_blk = {.name = STRCAT("sspp_csc", num), \ > + .id = DPU_SSPP_CSC_10BIT, \ > + .base = 0x1a00, .len = 0x100,}, \ > + .format_list = plane_formats_yuv, \ > + .num_formats = ARRAY_SIZE(plane_formats_yuv), \ > + .virt_format_list = plane_formats, \ > + .virt_num_formats = ARRAY_SIZE(plane_formats), \ > + .rotation_cfg = rot_cfg, \ > } > > #define _DMA_SBLK(num, sdma_pri) \ > @@ -684,6 +712,12 @@ static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 = > static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 = > _VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3); > > +static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = { > + .rot_maxheight = 1088, > + .rot_num_formats = ARRAY_SIZE(rotation_v2_formats), > + .rot_format_list = rotation_v2_formats, > +}; > + > static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 = > _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3); > static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 = > @@ -751,6 +785,9 @@ static const struct dpu_sspp_cfg sdm845_sspp[] = { > static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 = > _VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4); > > +static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 = > + _VIG_SBLK_ROT("0", 4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_sc7280_cfg_v2); > + > static const struct dpu_sspp_cfg sc7180_sspp[] = { > SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, > sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), > @@ -791,8 +828,8 @@ static const struct dpu_sspp_cfg sm8250_sspp[] = { > }; > > static const struct dpu_sspp_cfg sc7280_sspp[] = { > - SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, > - sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), > + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7280_MASK, > + sc7280_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), > SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, > sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), > SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_CURSOR_SDM845_MASK, > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > index b85b24b..35dd5c4 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h > @@ -112,6 +112,7 @@ enum { > * @DPU_SSPP_TS_PREFILL Supports prefill with traffic shaper > * @DPU_SSPP_TS_PREFILL_REC1 Supports prefill with traffic shaper multirec > * @DPU_SSPP_CDP Supports client driven prefetch > + * @DPU_SSPP_INLINE_ROTATION Support inline rotation > * @DPU_SSPP_MAX maximum value > */ > enum { > @@ -132,6 +133,7 @@ enum { > DPU_SSPP_TS_PREFILL, > DPU_SSPP_TS_PREFILL_REC1, > DPU_SSPP_CDP, > + DPU_SSPP_INLINE_ROTATION, > DPU_SSPP_MAX > }; > > @@ -315,6 +317,18 @@ struct dpu_qos_lut_tbl { > }; > > /** > + * struct dpu_rotation_cfg - define inline rotation config > + * @rot_maxheight: max pre rotated height allowed for rotation > + * @rot_num_formats: number of elements in @rot_format_list > + * @rot_format_list: list of supported rotator formats > + */ > +struct dpu_rotation_cfg { > + u32 rot_maxheight; > + size_t rot_num_formats; > + const u32 *rot_format_list; > +}; > + > +/** > * struct dpu_caps - define DPU capabilities > * @max_mixer_width max layer mixer line width support. > * @max_mixer_blendstages max layer mixer blend stages or > @@ -369,6 +383,7 @@ struct dpu_caps { > * @num_formats: Number of supported formats > * @virt_format_list: Pointer to list of supported formats for virtual planes > * @virt_num_formats: Number of supported formats for virtual planes > + * @dpu_rotation_cfg: inline rotation configuration > */ > struct dpu_sspp_sub_blks { > u32 creq_vblank; > @@ -390,6 +405,7 @@ struct dpu_sspp_sub_blks { > u32 num_formats; > const u32 *virt_format_list; > u32 virt_num_formats; > + const struct dpu_rotation_cfg *rotation_cfg; > }; > > /** > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > index 3216cda..c77c3d9d 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > @@ -528,11 +528,19 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, > struct dpu_plane_state *pstate, > uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h, > struct dpu_hw_scaler3_cfg *scale_cfg, > - struct dpu_hw_pixel_ext *pixel_ext, > const struct dpu_format *fmt, > uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v) > { > uint32_t i; > + bool inline_rotation = pstate->rotation & DRM_MODE_ROTATE_90; > + > + /* > + * For inline rotation cases, scaler config is post-rotation, > + * so swap the dimensions here. However, pixel extension will > + * need pre-rotation settings. > + */ > + if (inline_rotation) > + swap(src_w, src_h); > > scale_cfg->phase_step_x[DPU_SSPP_COMP_0] = > mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w); > @@ -571,11 +579,6 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, > scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H; > scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V; > } > - > - pixel_ext->num_ext_pxls_top[i] = > - scale_cfg->src_height[i]; > - pixel_ext->num_ext_pxls_left[i] = > - scale_cfg->src_width[i]; > } > if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h) > && (src_w == dst_w)) > @@ -591,6 +594,24 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, > scale_cfg->enable = 1; > } > > +static void _dpu_plane_setup_pixel_ext(struct dpu_hw_scaler3_cfg *scale_cfg, > + struct dpu_hw_pixel_ext *pixel_ext, > + uint32_t src_w, uint32_t src_h, > + uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v) > +{ > + int i; > + > + for (i = 0; i < DPU_MAX_PLANES; i++) { > + if (i == DPU_SSPP_COMP_1_2 || i == DPU_SSPP_COMP_2) { > + src_w /= chroma_subsmpl_h; > + src_h /= chroma_subsmpl_v; > + } > + > + pixel_ext->num_ext_pxls_top[i] = src_h; > + pixel_ext->num_ext_pxls_left[i] = src_w; > + } > +} > + > static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = { > { > /* S15.16 format */ > @@ -654,6 +675,10 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, > const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format); > struct dpu_hw_scaler3_cfg scaler3_cfg; > struct dpu_hw_pixel_ext pixel_ext; > + u32 src_width = drm_rect_width(&pipe_cfg->src_rect); > + u32 src_height = drm_rect_height(&pipe_cfg->src_rect); > + u32 dst_width = drm_rect_width(&pipe_cfg->dst_rect); > + u32 dst_height = drm_rect_height(&pipe_cfg->dst_rect); > > memset(&scaler3_cfg, 0, sizeof(scaler3_cfg)); > memset(&pixel_ext, 0, sizeof(pixel_ext)); > @@ -661,13 +686,17 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, > /* don't chroma subsample if decimating */ > /* update scaler. calculate default config for QSEED3 */ > _dpu_plane_setup_scaler3(pdpu, pstate, > - drm_rect_width(&pipe_cfg->src_rect), > - drm_rect_height(&pipe_cfg->src_rect), > - drm_rect_width(&pipe_cfg->dst_rect), > - drm_rect_height(&pipe_cfg->dst_rect), > - &scaler3_cfg, &pixel_ext, fmt, > + src_width, > + src_height, > + dst_width, > + dst_height, > + &scaler3_cfg, fmt, > info->hsub, info->vsub); > > + /* configure pixel extension based on scalar config */ > + _dpu_plane_setup_pixel_ext(&scaler3_cfg, &pixel_ext, > + src_width, src_height, info->hsub, info->vsub); > + > if (pdpu->pipe_hw->ops.setup_pe) > pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw, > &pixel_ext); > @@ -956,6 +985,34 @@ static bool dpu_plane_validate_src(struct drm_rect *src, > drm_rect_equals(fb_rect, src); > } > > +static int dpu_plane_check_inline_rotation(struct dpu_plane *pdpu, > + const struct dpu_sspp_sub_blks *sblk, > + struct drm_rect src, const struct dpu_format *fmt) > +{ > + size_t num_formats; > + const u32 *supported_formats; > + > + if (!sblk->rotation_cfg) { > + DPU_ERROR("invalid rotation cfg\n"); > + return -EINVAL; > + } > + > + if (drm_rect_width(&src) > sblk->rotation_cfg->rot_maxheight) { > + DPU_DEBUG_PLANE(pdpu, "invalid height for inline rot:%d max:%d\n", > + src.y2, sblk->rotation_cfg->rot_maxheight); > + return -EINVAL; > + } > + > + supported_formats = sblk->rotation_cfg->rot_format_list; > + num_formats = sblk->rotation_cfg->rot_num_formats; > + > + if (!DPU_FORMAT_IS_UBWC(fmt) || > + !dpu_find_format(fmt->base.pixel_format, supported_formats, num_formats)) > + return -EINVAL; > + > + return 0; > +} > + > static int dpu_plane_atomic_check(struct drm_plane *plane, > struct drm_atomic_state *state) > { > @@ -968,15 +1025,19 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > const struct dpu_format *fmt; > struct drm_rect src, dst, fb_rect = { 0 }; > uint32_t min_src_size, max_linewidth; > + unsigned int rotation; > + uint32_t supported_rotations; > + const struct dpu_sspp_cfg *pipe_hw_caps = pdpu->pipe_hw->cap; > + const struct dpu_sspp_sub_blks *sblk = pdpu->pipe_hw->cap->sblk; > > if (new_plane_state->crtc) > crtc_state = drm_atomic_get_new_crtc_state(state, > new_plane_state->crtc); > > - min_scale = FRAC_16_16(1, pdpu->pipe_hw->cap->sblk->maxupscale); > + min_scale = FRAC_16_16(1, sblk->maxupscale); > ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state, > min_scale, > - pdpu->pipe_hw->cap->sblk->maxdwnscale << 16, > + sblk->maxdwnscale << 16, > true, true); > if (ret) { > DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret); > @@ -1002,8 +1063,8 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1; > > if (DPU_FORMAT_IS_YUV(fmt) && > - (!(pdpu->pipe_hw->cap->features & DPU_SSPP_SCALER) || > - !(pdpu->pipe_hw->cap->features & DPU_SSPP_CSC_ANY))) { > + (!(pipe_hw_caps->features & DPU_SSPP_SCALER) || > + !(pipe_hw_caps->features & DPU_SSPP_CSC_ANY))) { > DPU_DEBUG_PLANE(pdpu, > "plane doesn't have scaler/csc for yuv\n"); > return -EINVAL; > @@ -1036,6 +1097,22 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > return -E2BIG; > } > > + supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0; > + > + if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) > + supported_rotations |= DRM_MODE_ROTATE_90; > + > + rotation = drm_rotation_simplify(new_plane_state->rotation, > + supported_rotations); > + > + if ((pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) && > + (rotation & DRM_MODE_ROTATE_90)) { > + ret = dpu_plane_check_inline_rotation(pdpu, sblk, src, fmt); > + if (ret) > + return ret; > + } > + > + pstate->rotation = rotation; > pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state); > > return 0; > @@ -1151,21 +1228,19 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) > pstate->multirect_mode); > > if (pdpu->pipe_hw->ops.setup_format) { > - unsigned int rotation; > + unsigned int rotation = pstate->rotation; > > src_flags = 0x0; > > - rotation = drm_rotation_simplify(state->rotation, > - DRM_MODE_ROTATE_0 | > - DRM_MODE_REFLECT_X | > - DRM_MODE_REFLECT_Y); > - > if (rotation & DRM_MODE_REFLECT_X) > src_flags |= DPU_SSPP_FLIP_LR; > > if (rotation & DRM_MODE_REFLECT_Y) > src_flags |= DPU_SSPP_FLIP_UD; > > + if (rotation & DRM_MODE_ROTATE_90) > + src_flags |= DPU_SSPP_ROT_90; > + > /* update format */ > pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags, > pstate->multirect_index); > @@ -1458,6 +1533,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev, > struct dpu_kms *kms = to_dpu_kms(priv->kms); > int zpos_max = DPU_ZPOS_MAX; > uint32_t num_formats; > + uint32_t supported_rotations; > int ret = -EINVAL; > > /* create and zero local structure */ > @@ -1526,12 +1602,13 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev, > BIT(DRM_MODE_BLEND_PREMULTI) | > BIT(DRM_MODE_BLEND_COVERAGE)); > > + supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0; > + > + if (pdpu->pipe_hw->cap->features & BIT(DPU_SSPP_INLINE_ROTATION)) > + supported_rotations |= DRM_MODE_ROTATE_MASK; > + > drm_plane_create_rotation_property(plane, > - DRM_MODE_ROTATE_0, > - DRM_MODE_ROTATE_0 | > - DRM_MODE_ROTATE_180 | > - DRM_MODE_REFLECT_X | > - DRM_MODE_REFLECT_Y); > + DRM_MODE_ROTATE_0, supported_rotations); > > drm_plane_enable_fb_damage_clips(plane); > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h > index 50781e2..e146310 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h > @@ -26,6 +26,7 @@ > * @plane_fetch_bw: calculated BW per plane > * @plane_clk: calculated clk per plane > * @needs_dirtyfb: whether attached CRTC needs pixel data explicitly flushed > + * @rotation: simplified drm rotation hint > */ > struct dpu_plane_state { > struct drm_plane_state base; > @@ -40,6 +41,7 @@ struct dpu_plane_state { > u64 plane_clk; > > bool needs_dirtyfb; > + unsigned int rotation; > }; > > /**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index a4fe77c..85b539d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -35,6 +35,9 @@ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_EXCL_RECT)) +#define VIG_SC7280_MASK \ + (VIG_SC7180_MASK | BIT(DPU_SSPP_INLINE_ROTATION)) + #define DMA_SDM845_MASK \ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\ @@ -203,6 +206,11 @@ static const uint32_t plane_formats_yuv[] = { DRM_FORMAT_YVU420, }; +static const u32 rotation_v2_formats[] = { + DRM_FORMAT_NV12, + /* TODO add formats after validation */ +}; + /************************************************************* * DPU sub blocks config *************************************************************/ @@ -642,7 +650,6 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = { *************************************************************/ /* SSPP common configuration */ - #define _VIG_SBLK(num, sdma_pri, qseed_ver) \ { \ .maxdwnscale = MAX_DOWNSCALE_RATIO, \ @@ -660,6 +667,27 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = { .num_formats = ARRAY_SIZE(plane_formats_yuv), \ .virt_format_list = plane_formats, \ .virt_num_formats = ARRAY_SIZE(plane_formats), \ + .rotation_cfg = NULL, \ + } + +#define _VIG_SBLK_ROT(num, sdma_pri, qseed_ver, rot_cfg) \ + { \ + .maxdwnscale = MAX_DOWNSCALE_RATIO, \ + .maxupscale = MAX_UPSCALE_RATIO, \ + .smart_dma_priority = sdma_pri, \ + .src_blk = {.name = STRCAT("sspp_src_", num), \ + .id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \ + .scaler_blk = {.name = STRCAT("sspp_scaler", num), \ + .id = qseed_ver, \ + .base = 0xa00, .len = 0xa0,}, \ + .csc_blk = {.name = STRCAT("sspp_csc", num), \ + .id = DPU_SSPP_CSC_10BIT, \ + .base = 0x1a00, .len = 0x100,}, \ + .format_list = plane_formats_yuv, \ + .num_formats = ARRAY_SIZE(plane_formats_yuv), \ + .virt_format_list = plane_formats, \ + .virt_num_formats = ARRAY_SIZE(plane_formats), \ + .rotation_cfg = rot_cfg, \ } #define _DMA_SBLK(num, sdma_pri) \ @@ -684,6 +712,12 @@ static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 = static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 = _VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3); +static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = { + .rot_maxheight = 1088, + .rot_num_formats = ARRAY_SIZE(rotation_v2_formats), + .rot_format_list = rotation_v2_formats, +}; + static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 = _VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3); static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 = @@ -751,6 +785,9 @@ static const struct dpu_sspp_cfg sdm845_sspp[] = { static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 = _VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4); +static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 = + _VIG_SBLK_ROT("0", 4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_sc7280_cfg_v2); + static const struct dpu_sspp_cfg sc7180_sspp[] = { SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), @@ -791,8 +828,8 @@ static const struct dpu_sspp_cfg sm8250_sspp[] = { }; static const struct dpu_sspp_cfg sc7280_sspp[] = { - SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, - sc7180_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), + SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7280_MASK, + sc7280_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0), SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_CURSOR_SDM845_MASK, diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index b85b24b..35dd5c4 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -112,6 +112,7 @@ enum { * @DPU_SSPP_TS_PREFILL Supports prefill with traffic shaper * @DPU_SSPP_TS_PREFILL_REC1 Supports prefill with traffic shaper multirec * @DPU_SSPP_CDP Supports client driven prefetch + * @DPU_SSPP_INLINE_ROTATION Support inline rotation * @DPU_SSPP_MAX maximum value */ enum { @@ -132,6 +133,7 @@ enum { DPU_SSPP_TS_PREFILL, DPU_SSPP_TS_PREFILL_REC1, DPU_SSPP_CDP, + DPU_SSPP_INLINE_ROTATION, DPU_SSPP_MAX }; @@ -315,6 +317,18 @@ struct dpu_qos_lut_tbl { }; /** + * struct dpu_rotation_cfg - define inline rotation config + * @rot_maxheight: max pre rotated height allowed for rotation + * @rot_num_formats: number of elements in @rot_format_list + * @rot_format_list: list of supported rotator formats + */ +struct dpu_rotation_cfg { + u32 rot_maxheight; + size_t rot_num_formats; + const u32 *rot_format_list; +}; + +/** * struct dpu_caps - define DPU capabilities * @max_mixer_width max layer mixer line width support. * @max_mixer_blendstages max layer mixer blend stages or @@ -369,6 +383,7 @@ struct dpu_caps { * @num_formats: Number of supported formats * @virt_format_list: Pointer to list of supported formats for virtual planes * @virt_num_formats: Number of supported formats for virtual planes + * @dpu_rotation_cfg: inline rotation configuration */ struct dpu_sspp_sub_blks { u32 creq_vblank; @@ -390,6 +405,7 @@ struct dpu_sspp_sub_blks { u32 num_formats; const u32 *virt_format_list; u32 virt_num_formats; + const struct dpu_rotation_cfg *rotation_cfg; }; /** diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 3216cda..c77c3d9d 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -528,11 +528,19 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, struct dpu_plane_state *pstate, uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h, struct dpu_hw_scaler3_cfg *scale_cfg, - struct dpu_hw_pixel_ext *pixel_ext, const struct dpu_format *fmt, uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v) { uint32_t i; + bool inline_rotation = pstate->rotation & DRM_MODE_ROTATE_90; + + /* + * For inline rotation cases, scaler config is post-rotation, + * so swap the dimensions here. However, pixel extension will + * need pre-rotation settings. + */ + if (inline_rotation) + swap(src_w, src_h); scale_cfg->phase_step_x[DPU_SSPP_COMP_0] = mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w); @@ -571,11 +579,6 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H; scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V; } - - pixel_ext->num_ext_pxls_top[i] = - scale_cfg->src_height[i]; - pixel_ext->num_ext_pxls_left[i] = - scale_cfg->src_width[i]; } if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h) && (src_w == dst_w)) @@ -591,6 +594,24 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, scale_cfg->enable = 1; } +static void _dpu_plane_setup_pixel_ext(struct dpu_hw_scaler3_cfg *scale_cfg, + struct dpu_hw_pixel_ext *pixel_ext, + uint32_t src_w, uint32_t src_h, + uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v) +{ + int i; + + for (i = 0; i < DPU_MAX_PLANES; i++) { + if (i == DPU_SSPP_COMP_1_2 || i == DPU_SSPP_COMP_2) { + src_w /= chroma_subsmpl_h; + src_h /= chroma_subsmpl_v; + } + + pixel_ext->num_ext_pxls_top[i] = src_h; + pixel_ext->num_ext_pxls_left[i] = src_w; + } +} + static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = { { /* S15.16 format */ @@ -654,6 +675,10 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format); struct dpu_hw_scaler3_cfg scaler3_cfg; struct dpu_hw_pixel_ext pixel_ext; + u32 src_width = drm_rect_width(&pipe_cfg->src_rect); + u32 src_height = drm_rect_height(&pipe_cfg->src_rect); + u32 dst_width = drm_rect_width(&pipe_cfg->dst_rect); + u32 dst_height = drm_rect_height(&pipe_cfg->dst_rect); memset(&scaler3_cfg, 0, sizeof(scaler3_cfg)); memset(&pixel_ext, 0, sizeof(pixel_ext)); @@ -661,13 +686,17 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, /* don't chroma subsample if decimating */ /* update scaler. calculate default config for QSEED3 */ _dpu_plane_setup_scaler3(pdpu, pstate, - drm_rect_width(&pipe_cfg->src_rect), - drm_rect_height(&pipe_cfg->src_rect), - drm_rect_width(&pipe_cfg->dst_rect), - drm_rect_height(&pipe_cfg->dst_rect), - &scaler3_cfg, &pixel_ext, fmt, + src_width, + src_height, + dst_width, + dst_height, + &scaler3_cfg, fmt, info->hsub, info->vsub); + /* configure pixel extension based on scalar config */ + _dpu_plane_setup_pixel_ext(&scaler3_cfg, &pixel_ext, + src_width, src_height, info->hsub, info->vsub); + if (pdpu->pipe_hw->ops.setup_pe) pdpu->pipe_hw->ops.setup_pe(pdpu->pipe_hw, &pixel_ext); @@ -956,6 +985,34 @@ static bool dpu_plane_validate_src(struct drm_rect *src, drm_rect_equals(fb_rect, src); } +static int dpu_plane_check_inline_rotation(struct dpu_plane *pdpu, + const struct dpu_sspp_sub_blks *sblk, + struct drm_rect src, const struct dpu_format *fmt) +{ + size_t num_formats; + const u32 *supported_formats; + + if (!sblk->rotation_cfg) { + DPU_ERROR("invalid rotation cfg\n"); + return -EINVAL; + } + + if (drm_rect_width(&src) > sblk->rotation_cfg->rot_maxheight) { + DPU_DEBUG_PLANE(pdpu, "invalid height for inline rot:%d max:%d\n", + src.y2, sblk->rotation_cfg->rot_maxheight); + return -EINVAL; + } + + supported_formats = sblk->rotation_cfg->rot_format_list; + num_formats = sblk->rotation_cfg->rot_num_formats; + + if (!DPU_FORMAT_IS_UBWC(fmt) || + !dpu_find_format(fmt->base.pixel_format, supported_formats, num_formats)) + return -EINVAL; + + return 0; +} + static int dpu_plane_atomic_check(struct drm_plane *plane, struct drm_atomic_state *state) { @@ -968,15 +1025,19 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, const struct dpu_format *fmt; struct drm_rect src, dst, fb_rect = { 0 }; uint32_t min_src_size, max_linewidth; + unsigned int rotation; + uint32_t supported_rotations; + const struct dpu_sspp_cfg *pipe_hw_caps = pdpu->pipe_hw->cap; + const struct dpu_sspp_sub_blks *sblk = pdpu->pipe_hw->cap->sblk; if (new_plane_state->crtc) crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); - min_scale = FRAC_16_16(1, pdpu->pipe_hw->cap->sblk->maxupscale); + min_scale = FRAC_16_16(1, sblk->maxupscale); ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state, min_scale, - pdpu->pipe_hw->cap->sblk->maxdwnscale << 16, + sblk->maxdwnscale << 16, true, true); if (ret) { DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret); @@ -1002,8 +1063,8 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1; if (DPU_FORMAT_IS_YUV(fmt) && - (!(pdpu->pipe_hw->cap->features & DPU_SSPP_SCALER) || - !(pdpu->pipe_hw->cap->features & DPU_SSPP_CSC_ANY))) { + (!(pipe_hw_caps->features & DPU_SSPP_SCALER) || + !(pipe_hw_caps->features & DPU_SSPP_CSC_ANY))) { DPU_DEBUG_PLANE(pdpu, "plane doesn't have scaler/csc for yuv\n"); return -EINVAL; @@ -1036,6 +1097,22 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, return -E2BIG; } + supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0; + + if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) + supported_rotations |= DRM_MODE_ROTATE_90; + + rotation = drm_rotation_simplify(new_plane_state->rotation, + supported_rotations); + + if ((pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) && + (rotation & DRM_MODE_ROTATE_90)) { + ret = dpu_plane_check_inline_rotation(pdpu, sblk, src, fmt); + if (ret) + return ret; + } + + pstate->rotation = rotation; pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state); return 0; @@ -1151,21 +1228,19 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) pstate->multirect_mode); if (pdpu->pipe_hw->ops.setup_format) { - unsigned int rotation; + unsigned int rotation = pstate->rotation; src_flags = 0x0; - rotation = drm_rotation_simplify(state->rotation, - DRM_MODE_ROTATE_0 | - DRM_MODE_REFLECT_X | - DRM_MODE_REFLECT_Y); - if (rotation & DRM_MODE_REFLECT_X) src_flags |= DPU_SSPP_FLIP_LR; if (rotation & DRM_MODE_REFLECT_Y) src_flags |= DPU_SSPP_FLIP_UD; + if (rotation & DRM_MODE_ROTATE_90) + src_flags |= DPU_SSPP_ROT_90; + /* update format */ pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags, pstate->multirect_index); @@ -1458,6 +1533,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev, struct dpu_kms *kms = to_dpu_kms(priv->kms); int zpos_max = DPU_ZPOS_MAX; uint32_t num_formats; + uint32_t supported_rotations; int ret = -EINVAL; /* create and zero local structure */ @@ -1526,12 +1602,13 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev, BIT(DRM_MODE_BLEND_PREMULTI) | BIT(DRM_MODE_BLEND_COVERAGE)); + supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0; + + if (pdpu->pipe_hw->cap->features & BIT(DPU_SSPP_INLINE_ROTATION)) + supported_rotations |= DRM_MODE_ROTATE_MASK; + drm_plane_create_rotation_property(plane, - DRM_MODE_ROTATE_0, - DRM_MODE_ROTATE_0 | - DRM_MODE_ROTATE_180 | - DRM_MODE_REFLECT_X | - DRM_MODE_REFLECT_Y); + DRM_MODE_ROTATE_0, supported_rotations); drm_plane_enable_fb_damage_clips(plane); diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 50781e2..e146310 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -26,6 +26,7 @@ * @plane_fetch_bw: calculated BW per plane * @plane_clk: calculated clk per plane * @needs_dirtyfb: whether attached CRTC needs pixel data explicitly flushed + * @rotation: simplified drm rotation hint */ struct dpu_plane_state { struct drm_plane_state base; @@ -40,6 +41,7 @@ struct dpu_plane_state { u64 plane_clk; bool needs_dirtyfb; + unsigned int rotation; }; /**