| Message ID | 20220406034346.74409-23-xuanzhuo@linux.alibaba.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | virtio pci support VIRTIO_F_RING_RESET (refactor vring) | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Guessing tree name failed - patch did not apply |
在 2022/4/6 上午11:43, Xuan Zhuo 写道: > Introduce vp_active_vq() to configure vring to backend after vq attach > vring. And configure vq vector if necessary. > > Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> > --- > drivers/virtio/virtio_pci_modern.c | 46 ++++++++++++++++++------------ > 1 file changed, 28 insertions(+), 18 deletions(-) > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c > index 86d301f272b8..49a4493732cf 100644 > --- a/drivers/virtio/virtio_pci_modern.c > +++ b/drivers/virtio/virtio_pci_modern.c > @@ -176,6 +176,29 @@ static void vp_reset(struct virtio_device *vdev) > vp_disable_cbs(vdev); > } > > +static int vp_active_vq(struct virtqueue *vq, u16 msix_vec) > +{ > + struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); > + struct virtio_pci_modern_device *mdev = &vp_dev->mdev; > + unsigned long index; > + > + index = vq->index; > + > + /* activate the queue */ > + vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); > + vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), > + virtqueue_get_avail_addr(vq), > + virtqueue_get_used_addr(vq)); > + > + if (msix_vec != VIRTIO_MSI_NO_VECTOR) { > + msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); > + if (msix_vec == VIRTIO_MSI_NO_VECTOR) > + return -EBUSY; > + } > + > + return 0; > +} > + > static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector) > { > return vp_modern_config_vector(&vp_dev->mdev, vector); > @@ -220,32 +243,19 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, > > vq->num_max = num; > > - /* activate the queue */ > - vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); > - vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), > - virtqueue_get_avail_addr(vq), > - virtqueue_get_used_addr(vq)); > + err = vp_active_vq(vq, msix_vec); > + if (err) > + goto err; > > vq->priv = (void __force *)vp_modern_map_vq_notify(mdev, index, NULL); > if (!vq->priv) { > err = -ENOMEM; > - goto err_map_notify; > - } > - > - if (msix_vec != VIRTIO_MSI_NO_VECTOR) { > - msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); > - if (msix_vec == VIRTIO_MSI_NO_VECTOR) { > - err = -EBUSY; > - goto err_assign_vector; > - } > + goto err; > } > > return vq; > > -err_assign_vector: > - if (!mdev->notify_base) > - pci_iounmap(mdev->pci_dev, (void __iomem __force *)vq->priv); We need keep this or anything I missed? Thanks > -err_map_notify: > +err: > vring_del_virtqueue(vq); > return ERR_PTR(err); > }
On Tue, 12 Apr 2022 14:58:19 +0800, Jason Wang <jasowang@redhat.com> wrote: > > 在 2022/4/6 上午11:43, Xuan Zhuo 写道: > > Introduce vp_active_vq() to configure vring to backend after vq attach > > vring. And configure vq vector if necessary. > > > > Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> > > --- > > drivers/virtio/virtio_pci_modern.c | 46 ++++++++++++++++++------------ > > 1 file changed, 28 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c > > index 86d301f272b8..49a4493732cf 100644 > > --- a/drivers/virtio/virtio_pci_modern.c > > +++ b/drivers/virtio/virtio_pci_modern.c > > @@ -176,6 +176,29 @@ static void vp_reset(struct virtio_device *vdev) > > vp_disable_cbs(vdev); > > } > > > > +static int vp_active_vq(struct virtqueue *vq, u16 msix_vec) > > +{ > > + struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); > > + struct virtio_pci_modern_device *mdev = &vp_dev->mdev; > > + unsigned long index; > > + > > + index = vq->index; > > + > > + /* activate the queue */ > > + vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); > > + vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), > > + virtqueue_get_avail_addr(vq), > > + virtqueue_get_used_addr(vq)); > > + > > + if (msix_vec != VIRTIO_MSI_NO_VECTOR) { > > + msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); > > + if (msix_vec == VIRTIO_MSI_NO_VECTOR) > > + return -EBUSY; > > + } > > + > > + return 0; > > +} > > + > > static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector) > > { > > return vp_modern_config_vector(&vp_dev->mdev, vector); > > @@ -220,32 +243,19 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, > > > > vq->num_max = num; > > > > - /* activate the queue */ > > - vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); > > - vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), > > - virtqueue_get_avail_addr(vq), > > - virtqueue_get_used_addr(vq)); > > + err = vp_active_vq(vq, msix_vec); > > + if (err) > > + goto err; > > > > vq->priv = (void __force *)vp_modern_map_vq_notify(mdev, index, NULL); > > if (!vq->priv) { > > err = -ENOMEM; > > - goto err_map_notify; > > - } > > - > > - if (msix_vec != VIRTIO_MSI_NO_VECTOR) { > > - msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); > > - if (msix_vec == VIRTIO_MSI_NO_VECTOR) { > > - err = -EBUSY; > > - goto err_assign_vector; > > - } > > + goto err; > > } > > > > return vq; > > > > -err_assign_vector: > > - if (!mdev->notify_base) > > - pci_iounmap(mdev->pci_dev, (void __iomem __force *)vq->priv); > > > We need keep this or anything I missed? I think so, after modification, vp_modern_map_vq_notify is the last step before returning vq. If it fails, then vq->priv is equal to NULL, so there is no need to execute pci_iounmap. Did I miss something? Thanks. > > Thanks > > > > -err_map_notify: > > +err: > > vring_del_virtqueue(vq); > > return ERR_PTR(err); > > } >
On Thu, Apr 14, 2022 at 2:25 PM Xuan Zhuo <xuanzhuo@linux.alibaba.com> wrote: > > On Tue, 12 Apr 2022 14:58:19 +0800, Jason Wang <jasowang@redhat.com> wrote: > > > > 在 2022/4/6 上午11:43, Xuan Zhuo 写道: > > > Introduce vp_active_vq() to configure vring to backend after vq attach > > > vring. And configure vq vector if necessary. > > > > > > Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> > > > --- > > > drivers/virtio/virtio_pci_modern.c | 46 ++++++++++++++++++------------ > > > 1 file changed, 28 insertions(+), 18 deletions(-) > > > > > > diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c > > > index 86d301f272b8..49a4493732cf 100644 > > > --- a/drivers/virtio/virtio_pci_modern.c > > > +++ b/drivers/virtio/virtio_pci_modern.c > > > @@ -176,6 +176,29 @@ static void vp_reset(struct virtio_device *vdev) > > > vp_disable_cbs(vdev); > > > } > > > > > > +static int vp_active_vq(struct virtqueue *vq, u16 msix_vec) > > > +{ > > > + struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); > > > + struct virtio_pci_modern_device *mdev = &vp_dev->mdev; > > > + unsigned long index; > > > + > > > + index = vq->index; > > > + > > > + /* activate the queue */ > > > + vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); > > > + vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), > > > + virtqueue_get_avail_addr(vq), > > > + virtqueue_get_used_addr(vq)); > > > + > > > + if (msix_vec != VIRTIO_MSI_NO_VECTOR) { > > > + msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); > > > + if (msix_vec == VIRTIO_MSI_NO_VECTOR) > > > + return -EBUSY; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector) > > > { > > > return vp_modern_config_vector(&vp_dev->mdev, vector); > > > @@ -220,32 +243,19 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, > > > > > > vq->num_max = num; > > > > > > - /* activate the queue */ > > > - vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); > > > - vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), > > > - virtqueue_get_avail_addr(vq), > > > - virtqueue_get_used_addr(vq)); > > > + err = vp_active_vq(vq, msix_vec); > > > + if (err) > > > + goto err; > > > > > > vq->priv = (void __force *)vp_modern_map_vq_notify(mdev, index, NULL); > > > if (!vq->priv) { > > > err = -ENOMEM; > > > - goto err_map_notify; > > > - } > > > - > > > - if (msix_vec != VIRTIO_MSI_NO_VECTOR) { > > > - msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); > > > - if (msix_vec == VIRTIO_MSI_NO_VECTOR) { > > > - err = -EBUSY; > > > - goto err_assign_vector; > > > - } > > > + goto err; > > > } > > > > > > return vq; > > > > > > -err_assign_vector: > > > - if (!mdev->notify_base) > > > - pci_iounmap(mdev->pci_dev, (void __iomem __force *)vq->priv); > > > > > > We need keep this or anything I missed? > > I think so, after modification, vp_modern_map_vq_notify is the last step before > returning vq. If it fails, then vq->priv is equal to NULL, so there is no need > to execute pci_iounmap. > > Did I miss something? Nope I miss that the vector is configured before the mapping. So Acked-by: Jason Wang <jasowang@redhat.com> Thanks > > Thanks. > > > > > Thanks > > > > > > > -err_map_notify: > > > +err: > > > vring_del_virtqueue(vq); > > > return ERR_PTR(err); > > > } > > >
diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c index 86d301f272b8..49a4493732cf 100644 --- a/drivers/virtio/virtio_pci_modern.c +++ b/drivers/virtio/virtio_pci_modern.c @@ -176,6 +176,29 @@ static void vp_reset(struct virtio_device *vdev) vp_disable_cbs(vdev); } +static int vp_active_vq(struct virtqueue *vq, u16 msix_vec) +{ + struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); + struct virtio_pci_modern_device *mdev = &vp_dev->mdev; + unsigned long index; + + index = vq->index; + + /* activate the queue */ + vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); + vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), + virtqueue_get_avail_addr(vq), + virtqueue_get_used_addr(vq)); + + if (msix_vec != VIRTIO_MSI_NO_VECTOR) { + msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); + if (msix_vec == VIRTIO_MSI_NO_VECTOR) + return -EBUSY; + } + + return 0; +} + static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector) { return vp_modern_config_vector(&vp_dev->mdev, vector); @@ -220,32 +243,19 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, vq->num_max = num; - /* activate the queue */ - vp_modern_set_queue_size(mdev, index, virtqueue_get_vring_size(vq)); - vp_modern_queue_address(mdev, index, virtqueue_get_desc_addr(vq), - virtqueue_get_avail_addr(vq), - virtqueue_get_used_addr(vq)); + err = vp_active_vq(vq, msix_vec); + if (err) + goto err; vq->priv = (void __force *)vp_modern_map_vq_notify(mdev, index, NULL); if (!vq->priv) { err = -ENOMEM; - goto err_map_notify; - } - - if (msix_vec != VIRTIO_MSI_NO_VECTOR) { - msix_vec = vp_modern_queue_vector(mdev, index, msix_vec); - if (msix_vec == VIRTIO_MSI_NO_VECTOR) { - err = -EBUSY; - goto err_assign_vector; - } + goto err; } return vq; -err_assign_vector: - if (!mdev->notify_base) - pci_iounmap(mdev->pci_dev, (void __iomem __force *)vq->priv); -err_map_notify: +err: vring_del_virtqueue(vq); return ERR_PTR(err); }
Introduce vp_active_vq() to configure vring to backend after vq attach vring. And configure vq vector if necessary. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> --- drivers/virtio/virtio_pci_modern.c | 46 ++++++++++++++++++------------ 1 file changed, 28 insertions(+), 18 deletions(-)