diff mbox series

[v2,6/7] arm64: dts: imx8mp-evk: Add PCIe support

Message ID 1646644054-24421-7-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State New, archived
Headers show
Series Add the iMX8MP PCIe support | expand

Commit Message

Richard Zhu March 7, 2022, 9:07 a.m. UTC 
Add PCIe support on i.MX8MP EVK board.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 55 ++++++++++++++++++++
 1 file changed, 55 insertions(+)

Comments

Alexander Stein March 24, 2022, 10:04 a.m. UTC | #1 
Hello Richard,

thanks for providing PCIe support for iMX8MP.

Am Montag, 7. März 2022, 10:07:33 CET schrieb Richard Zhu:
> Add PCIe support on i.MX8MP EVK board.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 55 ++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index
> 2eb943210678..ed77455a3f73 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -5,6 +5,7 @@
> 
>  /dts-v1/;
> 
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
>  #include "imx8mp.dtsi"
> 
>  / {
> @@ -33,6 +34,12 @@ memory@40000000 {
>  		      <0x1 0x00000000 0 0xc0000000>;
>  	};
> 
> +	pcie0_refclk: pcie0-refclk {
> +		compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <100000000>;
> +	};
> +
>  	reg_can1_stby: regulator-can1-stby {
>  		compatible = "regulator-fixed";
>  		regulator-name = "can1-stby";
> @@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby {
>  		enable-active-high;
>  	};
> 
> +	reg_pcie0: regulator-pcie {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pcie0_reg>;
> +		regulator-name = "MPCIE_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		pinctrl-names = "default";
> @@ -297,6 +315,30 @@ pca6416: gpio@20 {
>  	};
>  };
> 
> +&pcie_phy {
> +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> +	clocks = <&pcie0_refclk>;
> +	clock-names = "ref";
> +	status = "okay";
> +};
> +
> +&pcie{
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
> +	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> +		 <&clk IMX8MP_CLK_PCIE_ROOT>,
> +		 <&clk IMX8MP_CLK_HSIO_AXI>;
> +	clock-names = "pcie", "pcie_aux", "pcie_bus";

This causes the following warnings in dtbs_check (paths stripped):
imx8mp-evk.dtb: pcie@33800000: clock-names:1: 'pcie_bus' was expected
        From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
imx8mp-evk.dtb: pcie@33800000: clock-names:2: 'pcie_phy' was expected
        From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml

The bindings want 4 clocks for imx8mq (and imx8mp which seems similar):
* pcie
* pcie_bus
* pcie_phy
* pcie_aux

Ignoring the order there is no pcie_phy clock anymore, it was removed in 
commit 1840518ae7de ("clk: imx8mp: Remove the none exist pcie clocks"). I was 
wondering why, because the PCIE_PHY_CLK_ROOT at register 0xa380 inside CCM is 
listed in RM.
So there is a clock missing for 'pcie_phy' or the binding needs some update 
for imx8mp, no?

Regards,
Alexander

> +	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> +			  <&clk IMX8MP_CLK_PCIE_AUX>;
> +	assigned-clock-rates = <500000000>, <10000000>;
> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
> +				 <&clk IMX8MP_SYS_PLL2_50M>;
> +	vpcie-supply = <&reg_pcie0>;
> +	status = "okay";
> +};
> +
>  &snvs_pwrkey {
>  	status = "okay";
>  };
> @@ -442,6 +484,19 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
> 
>  		>;
> 
>  	};
> 
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	
0x61 /* open drain, pull up */
> +			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	
0x41
> +		>;
> +	};
> +
> +	pinctrl_pcie0_reg: pcie0reggrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	
0x41
> +		>;
> +	};
> +
>  	pinctrl_pmic: pmicgrp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	
0x000001c0
Richard Zhu March 28, 2022, 3 a.m. UTC | #2 
> -----Original Message-----
> From: Alexander Stein <alexander.stein@ew.tq-group.com>
> Sent: 2022年3月24日 18:05
> To: p.zabel@pengutronix.de; l.stach@pengutronix.de; bhelgaas@google.com;
> lorenzo.pieralisi@arm.com; robh@kernel.org; shawnguo@kernel.org;
> vkoul@kernel.org; Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: linux-phy@lists.infradead.org; devicetree@vger.kernel.org;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>; Hongxing Zhu <hongxing.zhu@nxp.com>
> Subject: Re: (EXT) [PATCH v2 6/7] arm64: dts: imx8mp-evk: Add PCIe support
> 
> Hello Richard,
> 
> thanks for providing PCIe support for iMX8MP.
> 
> Am Montag, 7. März 2022, 10:07:33 CET schrieb Richard Zhu:
> > Add PCIe support on i.MX8MP EVK board.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 55
> > ++++++++++++++++++++
> >  1 file changed, 55 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index
> > 2eb943210678..ed77455a3f73 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > @@ -5,6 +5,7 @@
> >
> >  /dts-v1/;
> >
> > +#include <dt-bindings/phy/phy-imx8-pcie.h>
> >  #include "imx8mp.dtsi"
> >
> >  / {
> > @@ -33,6 +34,12 @@ memory@40000000 {
> >  		      <0x1 0x00000000 0 0xc0000000>;
> >  	};
> >
> > +	pcie0_refclk: pcie0-refclk {
> > +		compatible = "fixed-clock";
> > +			#clock-cells = <0>;
> > +			clock-frequency = <100000000>;
> > +	};
> > +
> >  	reg_can1_stby: regulator-can1-stby {
> >  		compatible = "regulator-fixed";
> >  		regulator-name = "can1-stby";
> > @@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby {
> >  		enable-active-high;
> >  	};
> >
> > +	reg_pcie0: regulator-pcie {
> > +		compatible = "regulator-fixed";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_pcie0_reg>;
> > +		regulator-name = "MPCIE_3V3";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> > +
> >  	reg_usdhc2_vmmc: regulator-usdhc2 {
> >  		compatible = "regulator-fixed";
> >  		pinctrl-names = "default";
> > @@ -297,6 +315,30 @@ pca6416: gpio@20 {
> >  	};
> >  };
> >
> > +&pcie_phy {
> > +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> > +	clocks = <&pcie0_refclk>;
> > +	clock-names = "ref";
> > +	status = "okay";
> > +};
> > +
> > +&pcie{
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_pcie0>;
> > +	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
> > +	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> > +		 <&clk IMX8MP_CLK_PCIE_ROOT>,
> > +		 <&clk IMX8MP_CLK_HSIO_AXI>;
> > +	clock-names = "pcie", "pcie_aux", "pcie_bus";
> 
> This causes the following warnings in dtbs_check (paths stripped):
> imx8mp-evk.dtb: pcie@33800000: clock-names:1: 'pcie_bus' was expected
>         From schema:
> Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> imx8mp-evk.dtb: pcie@33800000: clock-names:2: 'pcie_phy' was expected
>         From schema:
> Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> 
> The bindings want 4 clocks for imx8mq (and imx8mp which seems similar):
> * pcie
> * pcie_bus
> * pcie_phy
> * pcie_aux
> 
> Ignoring the order there is no pcie_phy clock anymore, it was removed in
> commit 1840518ae7de ("clk: imx8mp: Remove the none exist pcie clocks"). I
> was wondering why, because the PCIE_PHY_CLK_ROOT at register 0xa380
> inside CCM is listed in RM.
> So there is a clock missing for 'pcie_phy' or the binding needs some update for
> imx8mp, no?
Hi Alexander:
Thanks for your comments.
I had confirmed with design team, the PCIE_PHY_CLK_ROOT at register 0xa380 is
 not used anymore on i.MX8MP PCIe. So I used to issue one patch to remove the
useless code from clock driver.
About the dt-binding of the i.MX8MP clocks, I would update the yaml later.
BTW, i.MX8MP PCIe is similar to the i.MX8MM PCIe's.
It's better to make reference to the i.MX8MM PCIe clocks definitions.

Best Regards
Richard Zhu

> 
> Regards,
> Alexander
> 
> > +	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> > +			  <&clk IMX8MP_CLK_PCIE_AUX>;
> > +	assigned-clock-rates = <500000000>, <10000000>;
> > +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
> > +				 <&clk IMX8MP_SYS_PLL2_50M>;
> > +	vpcie-supply = <&reg_pcie0>;
> > +	status = "okay";
> > +};
> > +
> >  &snvs_pwrkey {
> >  	status = "okay";
> >  };
> > @@ -442,6 +484,19 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA
> 	0x400001c3
> >
> >  		>;
> >
> >  	};
> >
> > +	pinctrl_pcie0: pcie0grp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B
> 0x61 /* open drain, pull up */
> > +			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07
> 0x41
> > +		>;
> > +	};
> > +
> > +	pinctrl_pcie0_reg: pcie0reggrp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06
> 0x41
> > +		>;
> > +	};
> > +
> >  	pinctrl_pmic: pmicgrp {
> >  		fsl,pins = <
> >  			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03
> 0x000001c0
> 
> 
>
Lucas Stach April 14, 2022, 9:04 p.m. UTC | #3 
Am Montag, dem 07.03.2022 um 17:07 +0800 schrieb Richard Zhu:
> Add PCIe support on i.MX8MP EVK board.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 55 ++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 2eb943210678..ed77455a3f73 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -5,6 +5,7 @@
>  
>  /dts-v1/;
>  
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
>  #include "imx8mp.dtsi"
>  
>  / {
> @@ -33,6 +34,12 @@ memory@40000000 {
>  		      <0x1 0x00000000 0 0xc0000000>;
>  	};
>  
> +	pcie0_refclk: pcie0-refclk {
> +		compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <100000000>;
> +	};
> +
>  	reg_can1_stby: regulator-can1-stby {
>  		compatible = "regulator-fixed";
>  		regulator-name = "can1-stby";
> @@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby {
>  		enable-active-high;
>  	};
>  
> +	reg_pcie0: regulator-pcie {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pcie0_reg>;
> +		regulator-name = "MPCIE_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	reg_usdhc2_vmmc: regulator-usdhc2 {
>  		compatible = "regulator-fixed";
>  		pinctrl-names = "default";
> @@ -297,6 +315,30 @@ pca6416: gpio@20 {
>  	};
>  };
>  
> +&pcie_phy {
> +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> +	clocks = <&pcie0_refclk>;
> +	clock-names = "ref";
> +	status = "okay";
> +};
> +
> +&pcie{
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
> +	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> +		 <&clk IMX8MP_CLK_PCIE_ROOT>,
> +		 <&clk IMX8MP_CLK_HSIO_AXI>;
> +	clock-names = "pcie", "pcie_aux", "pcie_bus";
> +	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> +			  <&clk IMX8MP_CLK_PCIE_AUX>;
> +	assigned-clock-rates = <500000000>, <10000000>;
> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,

You don't need to set the IMX8MP_CLK_HSIO_AXI clock rate here, that's
already don't by the power-domain, as it is keeping this bus clock
active. Only need to set the PCIE_AUX rate here.

Regards,
Lucas

> +				 <&clk IMX8MP_SYS_PLL2_50M>;
> +	vpcie-supply = <&reg_pcie0>;
> +	status = "okay";
> +};
> +
>  &snvs_pwrkey {
>  	status = "okay";
>  };
> @@ -442,6 +484,19 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
>  		>;
>  	};
>  
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61 /* open drain, pull up */
> +			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x41
> +		>;
> +	};
> +
> +	pinctrl_pcie0_reg: pcie0reggrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x41
> +		>;
> +	};
> +
>  	pinctrl_pmic: pmicgrp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
Richard Zhu April 18, 2022, 4:55 a.m. UTC | #4 
> -----Original Message-----
> From: Lucas Stach <l.stach@pengutronix.de>
> Sent: 2022年4月15日 5:05
> To: Hongxing Zhu <hongxing.zhu@nxp.com>; p.zabel@pengutronix.de;
> bhelgaas@google.com; lorenzo.pieralisi@arm.com; robh@kernel.org;
> shawnguo@kernel.org; vkoul@kernel.org; alexander.stein@ew.tq-group.com
> Cc: linux-phy@lists.infradead.org; devicetree@vger.kernel.org;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v2 6/7] arm64: dts: imx8mp-evk: Add PCIe support
> 
> Am Montag, dem 07.03.2022 um 17:07 +0800 schrieb Richard Zhu:
> > Add PCIe support on i.MX8MP EVK board.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 55
> > ++++++++++++++++++++
> >  1 file changed, 55 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > index 2eb943210678..ed77455a3f73 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > @@ -5,6 +5,7 @@
> >
> >  /dts-v1/;
> >
> > +#include <dt-bindings/phy/phy-imx8-pcie.h>
> >  #include "imx8mp.dtsi"
> >
> >  / {
> > @@ -33,6 +34,12 @@ memory@40000000 {
> >  		      <0x1 0x00000000 0 0xc0000000>;
> >  	};
> >
> > +	pcie0_refclk: pcie0-refclk {
> > +		compatible = "fixed-clock";
> > +			#clock-cells = <0>;
> > +			clock-frequency = <100000000>;
> > +	};
> > +
> >  	reg_can1_stby: regulator-can1-stby {
> >  		compatible = "regulator-fixed";
> >  		regulator-name = "can1-stby";
> > @@ -55,6 +62,17 @@ reg_can2_stby: regulator-can2-stby {
> >  		enable-active-high;
> >  	};
> >
> > +	reg_pcie0: regulator-pcie {
> > +		compatible = "regulator-fixed";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_pcie0_reg>;
> > +		regulator-name = "MPCIE_3V3";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +	};
> > +
> >  	reg_usdhc2_vmmc: regulator-usdhc2 {
> >  		compatible = "regulator-fixed";
> >  		pinctrl-names = "default";
> > @@ -297,6 +315,30 @@ pca6416: gpio@20 {
> >  	};
> >  };
> >
> > +&pcie_phy {
> > +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> > +	clocks = <&pcie0_refclk>;
> > +	clock-names = "ref";
> > +	status = "okay";
> > +};
> > +
> > +&pcie{
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_pcie0>;
> > +	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
> > +	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> > +		 <&clk IMX8MP_CLK_PCIE_ROOT>,
> > +		 <&clk IMX8MP_CLK_HSIO_AXI>;
> > +	clock-names = "pcie", "pcie_aux", "pcie_bus";
> > +	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> > +			  <&clk IMX8MP_CLK_PCIE_AUX>;
> > +	assigned-clock-rates = <500000000>, <10000000>;
> > +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
> 
> You don't need to set the IMX8MP_CLK_HSIO_AXI clock rate here, that's
> already don't by the power-domain, as it is keeping this bus clock active. Only
> need to set the PCIE_AUX rate here.
Thanks, for your review comments.
Would be changed in next version.

Best Regards
Richard Zhu
> 
> Regards,
> Lucas
> 
> > +				 <&clk IMX8MP_SYS_PLL2_50M>;
> > +	vpcie-supply = <&reg_pcie0>;
> > +	status = "okay";
> > +};
> > +
> >  &snvs_pwrkey {
> >  	status = "okay";
> >  };
> > @@ -442,6 +484,19 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA
> 	0x400001c3
> >  		>;
> >  	};
> >
> > +	pinctrl_pcie0: pcie0grp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61 /* open
> drain, pull up */
> > +			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x41
> > +		>;
> > +	};
> > +
> > +	pinctrl_pcie0_reg: pcie0reggrp {
> > +		fsl,pins = <
> > +			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x41
> > +		>;
> > +	};
> > +
> >  	pinctrl_pmic: pmicgrp {
> >  		fsl,pins = <
> >  			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 2eb943210678..ed77455a3f73 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -5,6 +5,7 @@ 
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -33,6 +34,12 @@  memory@40000000 {
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		regulator-name = "can1-stby";
@@ -55,6 +62,17 @@  reg_can2_stby: regulator-can2-stby {
 		enable-active-high;
 	};
 
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -297,6 +315,30 @@  pca6416: gpio@20 {
 	};
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie{
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+			  <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <500000000>, <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -442,6 +484,19 @@  MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x61 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x41
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x41
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0