new file mode 100644
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's AM62 wrapper module for the Synopsys USBSS-DRD controller
+
+maintainers:
+ - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+ compatible:
+ const: ti,am62-usb
+
+ reg:
+ maxItems: 1
+
+ ranges: true
+
+ power-domains:
+ description:
+ PM domain provider node and an args specifier containing
+ the USB ISO device id value. See,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+ maxItems: 1
+
+ clocks:
+ description: Clock phandle to usb2_refclk
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ref
+
+ ti,vbus-divider:
+ description:
+ Should be present if USB VBUS line is connected to the
+ VBUS pin of the SoC via a 1/3 voltage divider.
+ type: boolean
+
+ ti,syscon-phy-pll-refclk:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the SYSCON entry
+ - description: USB phy control register offset within SYSCON
+ description:
+ Specifier for conveying frequency of ref clock input, for the
+ operation of USB2PHY.
+
+ '#address-cells':
+ const: 2
+
+ '#size-cells':
+ const: 2
+
+patternProperties:
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
+ description: Required child node
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+ - clock-names
+ - ti,syscon-phy-pll-refclk
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usbss1: usb@f910000 {
+ compatible = "ti,am62-usb";
+ reg = <0x00 0x0f910000 0x00 0x800>;
+ clocks = <&k3_clks 162 3>;
+ clock-names = "ref";
+ ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+ power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@31100000 {
+ compatible = "snps,dwc3";
+ reg =<0x00 0x31100000 0x00 0x50000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+ interrupt-names = "host", "peripheral";
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+ };
Add bindings for the TI's AM62 wrapper module for the Synopsys USBSS-DRD controller. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> --- Changes since v3: - As VBUS_VALID interrupt is not being used, removed the interrupts property from the bindings. As there is change in the properties I did not pick the reviewed-by tags from the earlier version of the series. .../devicetree/bindings/usb/ti,am62-usb.yaml | 103 ++++++++++++++++++ 1 file changed, 103 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ti,am62-usb.yaml