diff mbox series

[1/1] power: supply: bq27xxx: expose battery data when CI=1

Message ID 20220419213647.1186284-2-absicsz@gmail.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series power: supply: bq27xxx: expose battery data when CI=1 | expand

Commit Message

Sicelo April 19, 2022, 9:36 p.m. UTC 
When the Capacity Inaccurate flag is set, the chip still provides data
about the battery, albeit inaccurate. Instead of discarding capacity
values for CI=1, expose the stale data and use the
POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED property to indicate that the
values should be used with care.

Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
---
 drivers/power/supply/bq27xxx_battery.c | 58 +++++++++++++-------------
 1 file changed, 28 insertions(+), 30 deletions(-)

Comments

Pali Rohár April 19, 2022, 9:59 p.m. UTC | #1 
On Tuesday 19 April 2022 23:36:47 Sicelo A. Mhlongo wrote:
> When the Capacity Inaccurate flag is set, the chip still provides data
> about the battery, albeit inaccurate. Instead of discarding capacity
> values for CI=1, expose the stale data and use the
> POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED property to indicate that the
> values should be used with care.

Looks good! I did not know that there is CALIBRATION_REQUIRED property.

Reviewed-by: Pali Rohár <pali@kernel.org>

> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
> ---
>  drivers/power/supply/bq27xxx_battery.c | 58 +++++++++++++-------------
>  1 file changed, 28 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> index 72e727cd31e8..a524237b758e 100644
> --- a/drivers/power/supply/bq27xxx_battery.c
> +++ b/drivers/power/supply/bq27xxx_battery.c
> @@ -1572,14 +1572,6 @@ static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg)
>   */
>  static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di)
>  {
> -	int flags;
> -
> -	if (di->opts & BQ27XXX_O_ZERO) {
> -		flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
> -		if (flags >= 0 && (flags & BQ27000_FLAG_CI))
> -			return -ENODATA;
> -	}
> -
>  	return bq27xxx_battery_read_charge(di, BQ27XXX_REG_NAC);
>  }
>  
> @@ -1742,6 +1734,18 @@ static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
>  		return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF);
>  }
>  
> +/*
> + * Returns true if reported battery capacity is inaccurate
> + */
> +static bool bq27xxx_battery_capacity_inaccurate(struct bq27xxx_device_info *di,
> +						 u16 flags)
> +{
> +	if (di->opts & BQ27XXX_O_HAS_CI)
> +		return (flags & BQ27000_FLAG_CI);
> +	else
> +		return false;
> +}
> +
>  static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
>  {
>  	/* Unlikely but important to return first */
> @@ -1751,6 +1755,8 @@ static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
>  		return POWER_SUPPLY_HEALTH_COLD;
>  	if (unlikely(bq27xxx_battery_dead(di, di->cache.flags)))
>  		return POWER_SUPPLY_HEALTH_DEAD;
> +	if (unlikely(bq27xxx_battery_capacity_inaccurate(di, di->cache.flags)))
> +		return POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
>  
>  	return POWER_SUPPLY_HEALTH_GOOD;
>  }
> @@ -1767,29 +1773,21 @@ void bq27xxx_battery_update(struct bq27xxx_device_info *di)
>  	if (cache.flags >= 0) {
>  		cache.temperature = bq27xxx_battery_read_temperature(di);
>  		if (has_ci_flag && (cache.flags & BQ27000_FLAG_CI)) {
> -			dev_info_once(di->dev, "battery is not calibrated! ignoring capacity values\n");
> -			cache.capacity = -ENODATA;
> -			cache.energy = -ENODATA;
> -			cache.time_to_empty = -ENODATA;
> -			cache.time_to_empty_avg = -ENODATA;
> -			cache.time_to_full = -ENODATA;
> -			cache.charge_full = -ENODATA;
> -			cache.health = -ENODATA;
> -		} else {
> -			if (di->regs[BQ27XXX_REG_TTE] != INVALID_REG_ADDR)
> -				cache.time_to_empty = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE);
> -			if (di->regs[BQ27XXX_REG_TTECP] != INVALID_REG_ADDR)
> -				cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP);
> -			if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR)
> -				cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF);
> -
> -			cache.charge_full = bq27xxx_battery_read_fcc(di);
> -			cache.capacity = bq27xxx_battery_read_soc(di);
> -			if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR)
> -				cache.energy = bq27xxx_battery_read_energy(di);
> -			di->cache.flags = cache.flags;
> -			cache.health = bq27xxx_battery_read_health(di);
> +			dev_info_once(di->dev, "battery is not calibrated! capacity values are inaccurate\n");

Just one note: Do we still need this info message in dmesg? Now when
this information is going to be reported via sysfs API, I'm not sure if
it still has some value...

>  		}
> +		if (di->regs[BQ27XXX_REG_TTE] != INVALID_REG_ADDR)
> +			cache.time_to_empty = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE);
> +		if (di->regs[BQ27XXX_REG_TTECP] != INVALID_REG_ADDR)
> +			cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP);
> +		if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR)
> +			cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF);
> +
> +		cache.charge_full = bq27xxx_battery_read_fcc(di);
> +		cache.capacity = bq27xxx_battery_read_soc(di);
> +		if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR)
> +			cache.energy = bq27xxx_battery_read_energy(di);
> +		di->cache.flags = cache.flags;
> +		cache.health = bq27xxx_battery_read_health(di);
>  		if (di->regs[BQ27XXX_REG_CYCT] != INVALID_REG_ADDR)
>  			cache.cycle_count = bq27xxx_battery_read_cyct(di);
>  
> -- 
> 2.35.2
>
diff mbox series

Patch

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 72e727cd31e8..a524237b758e 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1572,14 +1572,6 @@  static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg)
  */
 static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di)
 {
-	int flags;
-
-	if (di->opts & BQ27XXX_O_ZERO) {
-		flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
-		if (flags >= 0 && (flags & BQ27000_FLAG_CI))
-			return -ENODATA;
-	}
-
 	return bq27xxx_battery_read_charge(di, BQ27XXX_REG_NAC);
 }
 
@@ -1742,6 +1734,18 @@  static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
 		return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF);
 }
 
+/*
+ * Returns true if reported battery capacity is inaccurate
+ */
+static bool bq27xxx_battery_capacity_inaccurate(struct bq27xxx_device_info *di,
+						 u16 flags)
+{
+	if (di->opts & BQ27XXX_O_HAS_CI)
+		return (flags & BQ27000_FLAG_CI);
+	else
+		return false;
+}
+
 static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
 {
 	/* Unlikely but important to return first */
@@ -1751,6 +1755,8 @@  static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
 		return POWER_SUPPLY_HEALTH_COLD;
 	if (unlikely(bq27xxx_battery_dead(di, di->cache.flags)))
 		return POWER_SUPPLY_HEALTH_DEAD;
+	if (unlikely(bq27xxx_battery_capacity_inaccurate(di, di->cache.flags)))
+		return POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
 
 	return POWER_SUPPLY_HEALTH_GOOD;
 }
@@ -1767,29 +1773,21 @@  void bq27xxx_battery_update(struct bq27xxx_device_info *di)
 	if (cache.flags >= 0) {
 		cache.temperature = bq27xxx_battery_read_temperature(di);
 		if (has_ci_flag && (cache.flags & BQ27000_FLAG_CI)) {
-			dev_info_once(di->dev, "battery is not calibrated! ignoring capacity values\n");
-			cache.capacity = -ENODATA;
-			cache.energy = -ENODATA;
-			cache.time_to_empty = -ENODATA;
-			cache.time_to_empty_avg = -ENODATA;
-			cache.time_to_full = -ENODATA;
-			cache.charge_full = -ENODATA;
-			cache.health = -ENODATA;
-		} else {
-			if (di->regs[BQ27XXX_REG_TTE] != INVALID_REG_ADDR)
-				cache.time_to_empty = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE);
-			if (di->regs[BQ27XXX_REG_TTECP] != INVALID_REG_ADDR)
-				cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP);
-			if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR)
-				cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF);
-
-			cache.charge_full = bq27xxx_battery_read_fcc(di);
-			cache.capacity = bq27xxx_battery_read_soc(di);
-			if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR)
-				cache.energy = bq27xxx_battery_read_energy(di);
-			di->cache.flags = cache.flags;
-			cache.health = bq27xxx_battery_read_health(di);
+			dev_info_once(di->dev, "battery is not calibrated! capacity values are inaccurate\n");
 		}
+		if (di->regs[BQ27XXX_REG_TTE] != INVALID_REG_ADDR)
+			cache.time_to_empty = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE);
+		if (di->regs[BQ27XXX_REG_TTECP] != INVALID_REG_ADDR)
+			cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP);
+		if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR)
+			cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF);
+
+		cache.charge_full = bq27xxx_battery_read_fcc(di);
+		cache.capacity = bq27xxx_battery_read_soc(di);
+		if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR)
+			cache.energy = bq27xxx_battery_read_energy(di);
+		di->cache.flags = cache.flags;
+		cache.health = bq27xxx_battery_read_health(di);
 		if (di->regs[BQ27XXX_REG_CYCT] != INVALID_REG_ADDR)
 			cache.cycle_count = bq27xxx_battery_read_cyct(di);